98-11560. Airworthiness Directives; Bombardier Model CL-215-1A10 and CL- 215-6B11 Series Airplanes; Correction  

  • [Federal Register Volume 63, Number 85 (Monday, May 4, 1998)]
    [Rules and Regulations]
    [Page 24389]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 98-11560]
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF TRANSPORTATION
    
    Federal Aviation Administration
    
    14 CFR Part 39
    
    [Docket No. 98-NM-05-AD; Amendment 39-10458]
    RIN 2120-AA64
    
    
    Airworthiness Directives; Bombardier Model CL-215-1A10 and CL-
    215-6B11 Series Airplanes; Correction
    
    AGENCY: Federal Aviation Administration, DOT.
    
    ACTION: Direct final rule; correction.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This document corrects an error that appeared in amendment 39-
    10458 that was published in the Federal Register on April 10, 1998 (63 
    FR 17672). The error resulted in the inadvertent omission of the 
    applicability statement of the amendment. This amendment is applicable 
    to certain Bombardier Model CL-215-1A10 and CL-215-6B11 series 
    airplanes. This amendment requires repetitive inspections to detect 
    cracking on certain wing to fuselage frame-angles, and repair, if 
    necessary.
    
    DATES: Effective July 9, 1998.
        The incorporation by reference of certain publications listed in 
    the regulations was previously approved by the Director of the Federal 
    Register as of July 9, 1998 (63 FR 17672, April 10, 1998).
    
    FOR FURTHER INFORMATION CONTACT: Serge Napoleon, Aerospace Engineer, 
    Airframe and Propulsion Branch, ANE-171, FAA, Engine and Propeller 
    Directorate, New York Aircraft Certification Office, 10 Fifth Street, 
    Third Floor, Valley Stream, New York 11581; telephone (516) 256-7512; 
    fax (516) 568-2716.
    
    SUPPLEMENTARY INFORMATION: Amendment 39-10458, applicable to certain 
    Bombardier Model CL-215-1A10 and CL-215-6B11 series airplanes, was 
    published in the Federal Register on April 10, 1998 (63 FR 17672). That 
    amendment requires repetitive inspections to detect cracking on certain 
    wing to fuselage frame-angles, and repair, if necessary.
        As published, the applicability statement of the amendment was 
    omitted inadvertently. The FAA has determined that this omission must 
    be corrected. In all other respects, the original document is correct.
        Since no other part of the regulatory information has been changed, 
    the direct final rule is not being republished.
        The effective date of this amendment remains July 9, 1998.
    
    
    Sec. 39.13  [Corrected]
    
        1. On page 17674, in the first column, the airworthiness directive, 
    amendment 39-10458, is corrected by adding the applicability statement 
    preceding Note 1 to read as follows:
    * * * * *
        Applicability: Model CL-215-1A10 and CL-215-6B11 series 
    airplanes, serial numbers 1001 through 1125 inclusive, certificated 
    in any category.
    * * * * *
        Issued in Renton, Washington, on April 24, 1998.
    Gary L. Killion,
    Acting Manager, Transport Airplane Directorate, Aircraft Certification 
    Service.
    [FR Doc. 98-11560 Filed 5-1-98; 8:45 am]
    BILLING CODE 4910-13-U
    
    
    

Document Information

Effective Date:
7/9/1998
Published:
05/04/1998
Department:
Federal Aviation Administration
Entry Type:
Rule
Action:
Direct final rule; correction.
Document Number:
98-11560
Dates:
Effective July 9, 1998.
Pages:
24389-24389 (1 pages)
Docket Numbers:
Docket No. 98-NM-05-AD, Amendment 39-10458
RINs:
2120-AA64: Airworthiness Directives
RIN Links:
https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
PDF File:
98-11560.pdf
CFR: (1)
14 CFR 39.13