99-11561. National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins and Group IV Polymers and Resins and Standards of Performance for Volatile Organic Compound (VOC) Emissions From the Polymer Manufacturing ...  

  • [Federal Register Volume 64, Number 88 (Friday, May 7, 1999)]
    [Rules and Regulations]
    [Pages 24511-24512]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 99-11561]
    
    
    =======================================================================
    -----------------------------------------------------------------------
    
    ENVIRONMENTAL PROTECTION AGENCY
    
    40 CFR Parts 60 and 63
    
    [AD-FRL-6338-3]
    RIN 2060-AH47
    
    
    National Emission Standards for Hazardous Air Pollutant 
    Emissions: Group I Polymers and Resins and Group IV Polymers and Resins 
    and Standards of Performance for Volatile Organic Compound (VOC) 
    Emissions From the Polymer Manufacturing Industry
    
    AGENCY: Environmental Protection Agency (EPA).
    
    ACTION: Withdrawal of amendment in direct final rule.
    
    -----------------------------------------------------------------------
    
    SUMMARY: Due to an adverse comment, the EPA is withdrawing an amendment 
    from the March 9, 1999 direct final rule for the National Emission 
    Standards for Hazardous Air Pollutants (NESHAP): Group I Polymers and 
    Resins and Group IV Polymers and Resins and Standards of Performance 
    for Volatile Organic Compound (VOC) Emissions from the Polymer 
    Manufacturing Industry (64 FR 11536). This amendment deals with the 
    oxygen correction factor requirements when complying with the 20 parts 
    per million by volume (ppmv) control device outlet concentration 
    compliance option for continuous front-end process vents. The 
    withdrawal of the amendment from the direct final rule will only affect 
    sources subject to the Group I Polymers and Resins NESHAP.
    
    DATES: Amendment 6 in the direct final rule, which amends Sec. 63.485, 
    published on March 9, 1999 (64 FR 11542), is withdrawn as of May 7, 
    1999. The remaining amendments will be effective May 10, 1999 as stated 
    in the March 9 rule.
    
    ADDRESSES: Docket No. A-92-44 containing supporting information used in 
    the development of this notice is available for public inspection and 
    copying between 8 a.m. and 5:30 p.m., Monday through Friday, excluding 
    holidays. The docket is located in the EPA's Air and Radiation Docket 
    and Information Center, Waterside Mall, Room M-1500, 401 M Street, SW, 
    Washington, DC 20460, or by calling (202) 260-7548. A reasonable fee 
    may be charged for copying docket materials.
    
    FOR FURTHER INFORMATION CONTACT: Mr. Robert E. Rosensteel at (919) 541-
    5608, Emission Standards Division (MD-13), Environmental Protection 
    Agency, Research Triangle Park, North Carolina 27711, electronic mail 
    address rosensteel.bob@epa.gov''.
    
    
    [[Page 24512]]
    
    
    SUPPLEMENTARY INFORMATION: On March 9, 1999, the EPA published a direct 
    final rule (64 FR 11536) and a parallel proposal (64 FR 11555) to amend 
    portions of the Group I and Group IV Polymers and Resins NESHAP. Also 
    on March 9, 1999, the EPA published a notice (64 FR 11560) proposing 
    amendments to the Group I and Group IV Polymers and Resins NESHAP (40 
    CFR part 63, subparts U and JJJ, respectively) to make changes to the 
    1996 promulgated rules, in response to technical issues raised through 
    a 1996 petition for review.
        The EPA stated in the direct final rule (64 FR 11536, March 9, 
    1999) that if relevant, adverse comments were received by April 8, 
    1999, the EPA would publish a notice to withdraw the affected portions 
    of the direct final rule before its effective date of May 10, 1999. The 
    EPA received an adverse comment on Amendment 6 in the direct final rule 
    and, therefore, is withdrawing Amendment 6. This withdrawal of 
    Amendment 6 only affects sources subject to the Group I Polymers and 
    Resins NESHAP (40 CFR part 63, subpart U). Amendment 6 would have 
    changed the requirements in Sec. 63.485(a) to reference a new paragraph 
    (Sec. 63.485(v)), which would have adjusted the control device outlet 
    concentration of 20 ppmv using a 3 percent oxygen correction factor.
        The adverse comment stated that Sec. 63.485(a) in the direct final 
    rule makes reference to paragraphs in separate proposed amendments (64 
    FR 11560, March 9, 1999), which respond to a 1996 petition for review, 
    rather than to paragraphs in the 1996 promulgated NESHAP (40 CFR part 
    63, subpart U). The commenter said that Amendment 6 in the direct final 
    rule caused confusion in interpreting the intent of the regulation. The 
    EPA will address this comment on the withdrawn amendment in the 
    subsequent final action on the proposed amendments. The 25 amendments 
    for which we did not receive adverse comments will become effective on 
    May 10, 1999, as provided in the March 9, 1999 direct final rule (64 FR 
    11536).
    
        Dated: April 29, 1999.
    Robert Perciasepe,
    Assistant Administrator for Air and Radiation.
    [FR Doc. 99-11561 Filed 5-6-99; 8:45 am]
    BILLING CODE 6560-50-P
    
    
    

Document Information

Effective Date:
5/10/1999
Published:
05/07/1999
Department:
Environmental Protection Agency
Entry Type:
Rule
Action:
Withdrawal of amendment in direct final rule.
Document Number:
99-11561
Dates:
Amendment 6 in the direct final rule, which amends Sec. 63.485, published on March 9, 1999 (64 FR 11542), is withdrawn as of May 7, 1999. The remaining amendments will be effective May 10, 1999 as stated in the March 9 rule.
Pages:
24511-24512 (2 pages)
Docket Numbers:
AD-FRL-6338-3
RINs:
2060-AH47: NESHAP: Group I Polymers and Resins and Group IV Polymers and Resins-Amendments
RIN Links:
https://www.federalregister.gov/regulations/2060-AH47/neshap-group-i-polymers-and-resins-and-group-iv-polymers-and-resins-amendments
PDF File:
99-11561.pdf
CFR: (2)
40 CFR 60
40 CFR 63