E7-8785. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 12, 2007 to March 23, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before June 8, 2007.

ADDRESSES:

Submit your comments, identified by docket identification (ID) no. EPA-HQ-OPPT-2007-0332, by one of the following methods.

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO, EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2007-0332. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2007-0332. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket's index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC PublicReading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at the estimate.

vi. Provide specific examples to illustrate your concerns, and suggested alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 12, 2007 to March 23, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 109 Premanufacture Notices Received From: 02/12/07 to 03/23/07

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-07-0233	02/09/07	05/09/07	CBI	(G) (open non dispersive) Adhesion promoter	(G) Polyurethane acrylate resin
P-07-0234	02/12/07	05/12/07	CBI	(G) Inks, coatings adhesives and printing plates	(G) Acrylic esters
P-07-0235	02/12/07	05/12/07	CBI	(G) Textile colorant	(G) Tri-(substituted azo benzenesulfonic acid)-m- phelylenediamine, sodium salts
P-07-0236	02/12/07	05/12/07	Symrise Inc.	(S) Ingredient in fragrance products	(S) Cyclohexane, 2-methoxy-4-methyl-1-(1-methylethyl)-, (1s,2r,4r)-
P-07-0237	02/12/07	05/12/07	DIC International (USA) LLC	(G) Acrylic resin for coatings	(G) Hydroxy alkyl methacrylate, polymer with branched benzene and alkyl fumarate
P-07-0238	02/12/07	05/12/07	CBI	(G) Industrial wood applications	(G) Polyester acrylate
P-07-0239	02/12/07	05/12/07	Genesee Polymers Corporation	(S) Wetting agent for coatings and additives.	(S) Siloxanes and silicones, di-me, 3-hydroxypropyl me, ethers with polyethylene glycol mono-me ether and polyethylene-polypropylene glycol mono-bu ether
P-07-0240	02/12/07	05/12/07	CBI	(S) Packaging adhesive	(G) Aromatic polyether polyester polyurethane, isocyanate-terminated
P-07-0241	02/12/07	05/12/07	The Dow Chemical Company	(G) Coating	(G) Acrylate siline adduct
P-07-0242	02/12/07	05/12/07	The Dow Chemical Company	(G) Coating	(G) Acrylate siline adduct
P-07-0243	02/13/07	05/13/07	CBI	(G) Industrial wood applications	(G) Polyester acrylate
P-07-0244	02/14/07	05/14/07	CBI	(G) Byproduct feedstock	(G) Carboxylic acid ester
P-07-0245	02/14/07	05/14/07	CBI	(G) 1. Colorant for fiber board; 2. Spray pattern indicator	(G) Polyalkoxylated aromatic colorant
P-07-0246	02/14/07	05/14/07	CBI	(G) 1. Colorant for fiber board; 2. Spray pattern indicator	(G) Polyalkoxylated aromatic colorant
P-07-0247	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0248	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0249	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0250	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0251	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0252	02/12/07	05/12/07	CBI	(S) Polyester grind resin for pigment dispersion	(G) Fatty acid modified polyester resin
P-07-0253	02/13/07	05/13/07	CIBA Specialty Chemicals Corporation	(S) Defoamer in waterborne inks and resin-free pigment concentrates for printing applications	(G) Polyether-modified siloxane
P-07-0254	02/14/07	05/14/07	CBI	(G) Additive	(G) Octanosilane derivative
P-07-0255	02/15/07	05/15/07	Ineos Melamines, a Division of Ineos Americas LLC	(S) Internal release agent for aqueous, heat curing aminoplast resins	(G) Phosphoric acid, alkylester, compound with morpholine
P-07-0256	02/16/07	05/16/07	The Dow Chemical Company	(G) Prepolymer for isocyanate polyurethane	(G) Mono-me ether blocked methylenephenyl diisocyanate polyurethane polymer
P-07-0257	02/20/07	05/20/07	CBI	(S) A protective coating for wood flooring; a fire retardant coating for textiles; a fire retardant coating for architectural applications	(G) Aqueous, aliphatic polyether polyurethane dispersion polymer
P-07-0258	02/20/07	05/20/07	CBI	(G) Coating	(G) Acrylic acid polymer with vinylphosphonic acid and ethylene glycol acrylate
P-07-0259	02/21/07	05/21/07	CBI	(G) Polyurethane surfactant	(G) Silicone polyether copolymer
P-07-0260	02/21/07	05/21/07	CBI	(S) Solder mask for printed circuit board preparation	(G) 2-propenoic acid, 2-methyl, methyl ester, polymer with modified alkenyl ester and an aromatic alkenyl ester, 2-propenoate
P-07-0261	02/21/07	05/21/07	CBI	(G) Open non dispersive (binder)	(G) Urethane acrylate resin
P-07-0262	02/12/07	05/12/07	Symrise Inc.	(S) Ingredient in fragrance products	(S) Alkenes, C12-C14, hydroformylation products, distn. lights
P-07-0263	02/20/07	05/20/07	CBI	(G) Pigment additive used in various plastics applications	(G) Bis[(substituted)phenyl]-dihydro-pyrrolo[substituted]pyrrole-dione
P-07-0264	02/21/07	05/21/07	CBI	(G) Resin	(G) Isocyanic acid, polymethylenepolyphenylene ester, polymer with (chloromethyl)oxirane, 4,4′-(1-methylethylidene)bis[phenol] and .alpha.,.alpha.′-[(1-methylethylidene)di-4,1-phenylene]bis[.omega.-hydropoly(oxy-1,2-ethanediyl)], 2-ethylhexanoate, reaction products substituted ethanol and diethylenetriamine
P-07-0265	02/20/07	05/20/07	CBI	(S) Reactive dye for textile	(G) Substituted naphthalene disulfonic acid, alkali salt
P-07-0266	02/22/07	05/22/07	CBI	(G) Contained use in energy production.	(G) Amine phosphonate salt
P-07-0267	02/22/07	05/22/07	Boulder Scientific Company	(S) Raw material	(S) 2-propanol, 2-methyl-, sodium salt
P-07-0268	02/23/07	05/23/07	Eastman Kodak Company	(S) Dye used in imaging media/products; export	(G) Substituted benzoxazolium salt
P-07-0269	02/28/07	05/28/07	Nagase America Corp., New York Headquarters	(G) Category of use: Flame resisting material used in cars degree of containment: open, non-dispersive use	(G) Phosphoramidic acid, carbomonocyclic-,diphenylester
P-07-0270	02/28/07	05/28/07	Hi-tech Color, Inc.	(S) Thermal-transfer sheet (back coating agent)	(G) polyesterurethane
P-07-0271	02/28/07	05/28/07	Hi-tech Color, Inc.	(S) Thermal-transfer sheet (back coating agent)	(S) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)propyl group-terminated, diesters with 2-oxepanone homopolymer, polymers with 1,3-butanediol and 1,1′-methylenebis[isocyanatobenzene]
P-07-0272	02/28/07	05/28/07	CBI	(G) Intermediate	(G) Alkyl salicylate, metal salt
P-07-0273	02/28/07	05/28/07	CBI	(G) Intermediate	(G) Alkyl salicylate, metal salt
P-07-0274	02/28/07	05/28/07	CBI	(G) Intermediate	(G) Alkyl salicylic acid
P-07-0275	02/28/07	05/28/07	CBI	(G) Intermediate	(G) Alkyl salicylic acid
P-07-0276	02/28/07	05/28/07	CBI	(G) Lubricant additive	(G) Alkyl salicylate, metal salt
P-07-0277	02/28/07	05/28/07	CBI	(G) Lubricant additive	(G) Alkyl salicylate, metal salt
P-07-0278	03/01/07	05/29/07	Huntsman International, LLC	(S) Dyeing of cotton fabric	(G) Substituted triphenyldioxazinesulfonic acid reaction product with substituted naphthalenesulfonic acid amino triazine compound
P-07-0279	03/02/07	05/30/07	CBI	(S) Automotive coatings; fiberglass reinforced plastic; industrial adhesives; industrial coatings; automotive adhesives	(G) Acrylonitrile methacrylonitrile copolymer
P-07-0280	03/02/07	05/30/07	Plextronics, Inc.	(S) Reactive intermediate monomer for use in manufacturing a p-type organic semiconductor polymer. The polymer will be used in printed organic electronics applications	(S) Thiophene, 3-hexyl-
P-07-0281	03/05/07	06/02/07	Grain Processing Corporation	(G) highly dispersive use	(G) Corn by product
P-07-0282	03/02/07	05/30/07	Plextronics, Inc.	(S) P-type organic semiconductive polymer for use in printed organic electronics applications	(S) Thiophene, 2,5-dibromo-3-hexyl-, homopolymer
P-07-0283	03/02/07	05/30/07	Plextronics, Inc.	(S) Reactive intermediate monomer for use in manufacturing a p-type organic semiconductor polymer. The polymer will be used in printed organic electronics applications	(S) Thiophene, 2,5-dibromo-3-hexyl-
P-07-0284	03/05/07	06/02/07	Shin-etsu Silicones of America, Inc.	(S) Additive for textile treating agent	(G) Alkyl silicone resin
P-07-0285	03/05/07	06/02/07	CBI	(G) Ink drying aid	(G) Polyurethane derivative
P-07-0286	03/06/07	06/03/07	CBI	(G) Chemical intermediate reactive additive for thermoset resins	(G) Phenol, 4,4′-(1-methylethylidene)bis[disubstituted-, polymer with disubstituted phenol
P-07-0287	03/06/07	06/03/07	CBI	(G) Reactive additive for thermoset resins	(G) Phenol, 4,4′-(1-methylethylidene)bis[disubstituted-, polymer with disubstituted phenol, substituted propenoate
P-07-0288	03/07/07	06/04/07	CBI	(G) Polyurethane foam stabilizer	(G) Glycol phosphite
P-07-0289	03/08/07	06/05/07	CBI	(S) Laminating adhesive	(G) Isocyanate-terminated polyether polyester polyurethane
P-07-0290	03/08/07	06/05/07	Green Millennium Inc.	(S) Self cleaning coating (interior and exterior coating) for building; self cleaning surface treatment for window glass	(S) Ammonium hydroxide reaction with hydrogen peroxide and titanium tetrachloride
P-07-0291	03/09/07	06/06/07	BASF Corporation	(G) Catalyst	(G) Cobalt zinc complex derivative
P-07-0292	03/09/07	06/06/07	BASF Corporation	(G) Catalyst	(G) Cobalt zinc complex derivative
P-07-0293	03/12/07	06/09/07	Croda Inc.	(S) Solubilizer for semi-polar compounds into non-polar fluids.; glossing agent for inanimate surfaces (wood, metal, plastic, rubber, et al.); shine enhancer for pet shampoo	(G) Ppg-3 benzyl ether myristate
P-07-0294	03/12/07	06/09/07	Septon Company of America	(S) Compounds; adhesives	(S) Benzene, (1-methylethenyl)-, polymer with 1,3-butadiene, hydrogenated
P-07-0295	03/12/07	06/09/07	CBI	(G) Component of foam	(G) Fatty acid polymer with aliphatic diol and aromatic diacid
P-07-0296	03/12/07	06/09/07	CBI	(G) Component of foam	(G) Fatty acid polymer with aliphatic diol and aromatic diacid
P-07-0297	03/12/07	06/09/07	CBI	(G) Component of foam	(G) Fatty acid polymer with aliphatic diol and aromatic diacid
P-07-0298	03/12/07	06/09/07	CBI	(G) Coating material	(G) Ethyl methacrylate based polymer
P-07-0299	03/12/07	06/09/07	CBI	(G) Coating material	(G) Unsaturated polyurethane
P-07-0300	03/12/07	06/09/07	CBI	(G) Oil recovery	(G) Acrylic polymer on the basis of isobutyl methacrylate
P-07-0301	03/13/07	06/10/07	CBI	(S) Ingredient in fragrance compound	(G) Thioketone
P-07-0302	03/14/07	06/11/07	CBI	(G) Open, non-dispersive use	(G) Polyester resin
P-07-0303	03/16/07	06/13/07	CBI	(S) A component of ultraviolet light/ electron beam formulations	(G) 2-propenoic acid, 1,1′-[2,2-bis(hydroxymethyl)-1,3-propanediyl] ester, polymer with multifunctional isocyanate, pentaerythritol triacrylate-blocked
P-07-0304	03/16/07	06/13/07	CBI	(S) Ultraviolet absorber for plastic articles	(G) 2-(substituted 1,3,5-triazin-2-yl)-5-substituted phenol
P-07-0305	03/16/07	06/13/07	CBI	(G) Anti-static agent for thermoplastic resin	(G) Dicarboxylic acid, aminoalkanoic acid and polyether copolymer
P-07-0306	03/16/07	06/13/07	Hi-Tech Color, Inc.	(S) Thermal-transfer sheet (back coating agent)	(S) Siloxanes and silicones, di-me, 3-(2-hydroxyethoxy)propyl group-terminated, polymers with 1,4-butanediol, 1,4-cyclohexanedimethanol, 1,3-dioxolan-2-one, 1,6-hexanediol and 1,1′-methylenebis[isocyanatobenzene]
P-07-0307	03/16/07	06/13/07	CBI	(G) Open non dispersive (coatings)	(G) Polyurethane elastomer
P-07-0308	03/16/07	06/13/07	CBI	(G) Solvent for monomer production	(G) Glycol ether
P-07-0309	03/16/07	06/13/07	CBI	(G)colorant for textile	(G) b-a-alanine, n-(subsituted)-substituted oxoethyl phenylester
P-07-0310	03/19/07	06/16/07	CIBA Specialty Chemicals Corporation	(S) Pigment for coatings	(G) Halogenated diketopyrrolopyrrol derivative
P-07-0311	03/20/07	06/17/07	CBI	(G) Industrial coating	(G) Polyester acrylate
P-07-0312	03/20/07	06/17/07	Sakai Trading New York Inc.	(S) Paint element as curing agent; adhesive element as curing agent; advanced composite material as curing agent; insulating material for electric and electronic parts, such as ic chips as curing agent	(G) Hexahydrophthalic anhydride, bisphenol-a, and hydrogenated bisphenol-a, polymer with chloromethyl oxirane
P-07-0313	03/20/07	06/17/07	CBI	(G) Polyimide precursor	(G) Polyamic acid alkyl ester derivatives
P-07-0314	03/22/07	06/19/07	Henkel Corporation	(S) A polymerizable component in adhesive and sealant formulations	(G) Trialkenyl substituted cyclic alkane
P-07-0316	03/21/07	06/18/07	CBI	(G) Paper additive	(G) Alkylaminoalkyl amide
P-07-0317	03/21/07	06/18/07	CBI	(G) Paper additive	(G) Alkylaminoalkyl diamide
P-07-0318	03/21/07	06/18/07	CBI	(G) Thickener in lubricants	(G) Organic lithium compound
P-07-0320	03/23/07	06/20/07	CBI	(G) Inhibitor for oil field applications	(G) Quaternary ammonium salt
P-07-0321	03/23/07	06/23/07	CBI	(G) Inhibitor for oil field applications	(G) Quaternary ammonium salt
P-07-0322	03/23/07	06/23/07	CBI	(G) Inhibitor for oil field applications	(G) Quaternary ammonium salt
P-07-0323	03/23/07	06/23/07	CBI	(G) Inhibitor for oil field applications	(G) Quaternary ammonium salt
P-07-0324	03/23/07	06/23/07	CBI	(G) Inhibitor for oil field applications	(G) Quaternary ammonium salt
P-07-0325	03/23/07	06/20/07	Mitsubishi International Corporation	(G) Catalyst	(G) Dicycloalkyldialkoxysilane

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TME received:

II. 1 Test Marketing Exemption Notices Received From: 12/12/07 to 03/23/07

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-07-0011	02/23/07	04/08/07	Forbo Adhesives, LLC	(G) Hot melt polyurethane adhesive	(G) Isocyanate functional polyester polyether urethane polymer

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 45 Notices of Commencement From: 02/12/07 to 03/23/07

Case No.	Received Date	Commencement Notice End Date	Chemical
P-02-0590	02/26/07	02/19/07	(G) Polyester isocyanate
P-02-0941	02/16/07	02/07/07	(G) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine and polyoxyalkyleneamines
P-03-0326	03/15/07	03/08/07	(S) 2-propenoic acid, 2-methyl-, butyl ester, polymer with butyl 2-propenoate, ethenylbenzene and 2,5-furandione
P-04-0386	03/09/07	02/13/07	(G) Multifuctional acrylate oligomer resin
P-05-0583	03/21/07	02/12/07	(G) Acrylic modified polyester
P-05-0639	03/14/07	02/19/07	(S) 2-propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, methyl 2-methyl-2-propenoate, 2-methylpropyl 2-methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2-propenoate), tert-bu benzenecarboperoxoate-initiated
P-06-0020	03/02/07	02/20/07	(G) Oxazolidinone
P-06-0153	02/20/07	01/31/07	(G) Iso-tridecanol
P-06-0154	02/26/07	02/20/07	(G) Silicone-polyol
P-06-0155	03/05/07	02/14/07	(G) Aromatic tetracarbonyl compound polymer with 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethyl cyclohexane, 2-hydroxyethyl acrylate- and 2-oxepanone homopolymer 2-[(1-oxo-2-propenyl)oxy]ethyl ester-blocked
P-06-0168	02/23/07	02/19/07	(G) Copolymer of alkylacrylate and modified methylacrylate
P-06-0170	03/05/07	02/26/07	(G) Dicarboxylic acid ester, polymer with styrene, maleic anhydride and methyacrylate, compound with amine
P-06-0171	03/05/07	02/26/07	(G) Styrene-maleic acid copolymer, amine salt
P-06-0221	02/12/07	02/05/07	(G) Phenol-(methylethylidene)bis-, polymer with N-aminoethyl-N′-[(phenylmethyl)amino]ethyl]-ethanediamine, N-(aminoethyl)-N′-(phenylmethyl)-ethanediamine, N, N′-bis[(phenylmethyl)amino]ethyl]-ethanediamine, (chloromethyl)oxirane, .alpha.-hydro-.omega.-hydroxypoly(oxy-ethanediyl) and N-(phenylmethyl)-N′-[(phenylmethyl)amino] ethyl]-ethanediamine
P-06-0311	02/16/07	02/11/07	(G) Alkanoic acid, polymer with alkoxylated polyol, reaction products with alkylamine
P-06-0319	02/12/07	01/11/07	(G) Pyridyl ethyl thioacetate
P-06-0347	03/14/07	03/12/07	(G) Polyether modified polyamide
P-06-0376	03/09/07	03/01/07	(G) Acrylic resin
P-06-0395	02/26/07	01/31/07	(G) Epoxy acrylate oligomer
P-06-0531	03/09/07	03/01/07	(S) Fatty acids, coco, 2,2-dimethyl-1,3-propanediyl esters
P-06-0532	02/23/07	01/26/07	(G) Substituted styrene acrylate copolymer
P-06-0537	02/16/07	02/02/07	(G) Ester of fatty acid with bisphenol a ethoxylate
P-06-0551	02/26/07	02/08/07	(G) Substituted trihalomethylpyridine sulfonyl chloride
P-06-0553	02/26/07	01/27/07	(G) Substituted trihalomethylpyridinethiolate
P-06-0597	02/23/07	02/07/07	(G) Neutralized salt of functionalized acrylate polymer
P-06-0632	03/05/07	02/14/07	(S) Phospholipase c
P-06-0680	02/23/07	02/13/07	(G) Polyurethane polymer
P-06-0685	03/16/07	02/14/07	(S) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine, hexamethylenediamine and tetradecanedioic acid
P-06-0701	03/16/07	02/15/07	(G) Lithium salt of ethylene acrylic acid copolymer
P-06-0703	03/14/07	02/19/07	(G) Amine containing polyalkylene oxides
P-06-0705	02/23/07	02/19/07	(G) Polyamine modified polyamide
P-06-0727	02/22/07	02/08/07	(G) Substituted benzenemethanaminium chloride/acrylamide/acrylic acid polymer
P-06-0743	03/15/07	02/23/07	(G) Alkylamino hafnium salt
P-06-0779	02/12/07	02/01/07	(G) Substituted cyanoguanidine polymer
P-06-0780	02/12/07	02/01/07	(G) Substituted polyamine
P-06-0787	02/14/07	01/25/07	(G) Modified tall-oil
P-06-0788	02/14/07	02/08/07	(G) Modified tall-oil fatty acids
P-06-0790	02/21/07	01/28/07	(G) Siloxanes and silicones, di-alkyl, alkyl 2-[(1-oxo-2-propenyl)oxy]alkoxy
P-06-0795	02/12/07	01/28/07	(G) Isocetyl palmitate
P-06-0808	02/15/07	01/30/07	(G) Polyamide resin
P-06-0839	03/01/07	02/07/07	(G) Phenoxyphosphazene oligomer
P-07-0012	02/20/07	01/16/07	(G) Ethanol capped polyether polyurethane
P-07-0057	02/21/07	02/08/07	(G) Alkyl substituted tetrahydro pyran
P-07-0066	03/21/07	03/09/07	(G) Trimellitic anhydride, polymer with alkanediol, dihydroxyalkane diglycidyl ether di-3,5,5-trimethylhexanoate homopolymer, ethoxylated bis(hydroxysubstituted) alkane and heteromonocycledione, compound with 2-(dimethylamino) ethanol
P-07-0076	03/20/07	03/09/07	(G) Benzene, 1,1′-[1,2-ethanediylbis(oxy)]bis[polymethyl-
P-07-0085	03/13/07	03/07/07	(G) Acrylated aliphatic polyurethane
P-07-0086	03/14/07	03/08/07	(G) Water dispersible polyurethane
P-07-0091	02/26/07	02/21/07	(G) Acrylate copolymer

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: April 30, 2007.

Geraldine Hilton,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.