2020-12752. Wood Mouldings and Millwork Products From the People's Republic of China: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of wood mouldings and millwork products (millwork products) from the People's Republic of China (China). The period of investigation is January 1, 2019 through December 31, 2019. Interested parties are invited to comment on this preliminary determination.

DATES:

Applicable June 12, 2020.

FOR FURTHER INFORMATION CONTACT:

Irene Gorelik or Faris Montgomery, AD/CVD Operations, Office VIII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone] or [phone], respectively.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 703(b) of the Tariff Act of 1930, as amended (the Act). Commerce published the notice of initiation of this investigation on February 5, 2020.^[1] On March 12, 2020, Commerce postponed the preliminary determination of this investigation and the revised deadline is now June 8, 2020.^[2] For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.^[3] A list of topics discussed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​. The signed and electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The products covered by this investigation are millwork products from China. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations,^[4] the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., scope).^[5] Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. Commerce intends to issue its preliminary decision regarding comments concerning the scope of the antidumping (AD) and countervailing (CVD) investigations of millwork products from Brazil and China with the preliminary determinations of the AD investigations.

Methodology

Commerce is conducting this investigation in accordance with section 701 of the Act. For each of the subsidy programs found countervailable, Commerce preliminarily determines that there is a subsidy, i.e., a financial contribution by an “authority” that gives rise to a benefit to the recipient, and that the subsidy is specific.^[6]

Commerce notes that, in making these findings, it relied, in part, on facts available and, because it finds that one or more respondents did not act to the best of their ability to respond to Commerce's requests for information, it drew an adverse inference where appropriate in selecting from among the facts otherwise available.^[7] For further information, see “Use of Facts Otherwise Available and Adverse Inferences” in the Preliminary Decision Memorandum.

Alignment

As noted in the Preliminary Decision Memorandum, in accordance with section 705(a)(1) of the Act and 19 CFR 351.210(b)(4), Commerce is aligning the final CVD determination in this investigation with the final determination in the companion AD investigation of millwork products from China based on a request made by the petitioner.^[8] Consequently, the final CVD determination will be issued on the same date as the final AD determination, which is currently scheduled to be issued no later than October 19, 2020, unless postponed.

All-Others Rate

Sections 703(d) and 705(c)(5)(A) of the Act provide that in the preliminary determination, Commerce shall determine an estimated all-others rate for companies not individually examined. This rate shall be an amount equal to the weighted average of the estimated subsidy rates established for those companies individually examined, excluding any zero and de minimis rates and any rates based entirely under section 776 of the Act. In this investigation, as discussed in the Preliminary Decision Memorandum, Commerce preliminarily assigned a rate based entirely on facts available to Fujian Nanping Yuanqiao Wood-Industry Co., Ltd. Therefore, the only preliminary rate that is not zero, de minimis or based entirely on facts otherwise available is the rate calculated for Fujian Yinfeng Imp & Exp Trading Co., Ltd. (Yinfeng). Consequently, the preliminary rate calculated for Yinfeng is also assigned as the preliminary rate for all other producers and exporters.

Preliminary Determination

Commerce preliminarily determines that the following estimated countervailable subsidy rates exist:

Company	Subsidy rate (percent)
Fujian Yinfeng Imp & Exp Trading Co., Ltd 9	13.61
Fujian Nanping Yuanqiao Wood-Industry Co., Ltd	245.34
All Others	13.61

Suspension of Liquidation

In accordance with section 703(d)(1)(B) and (d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise as described in the scope of the investigation section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the rates indicated above.

Disclosure

Commerce intends to disclose its calculations and analysis performed to interested parties in this preliminary determination within five days of its public announcement, or if there is no public announcement, within five days of the date of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than seven days after the deadline date for case briefs.^[10] Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

International Trade Commission Notification

In accordance with section 703(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its determination. If the final determination is affirmative, the ITC will make its final determination before the later of 120 days after the date of this preliminary determination or 45 days after Commerce's final determination.

Notification to Interested Parties

This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act and 19 CFR 351.205(c).

Dated: June 8, 2020.

Jeffrey I. Kessler,

Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

The merchandise subject to this investigation consists of wood mouldings and millwork products that are made of wood (regardless of wood species), bamboo, laminated veneer lumber (LVL), or of wood and composite materials (where the composite materials make up less than 50 percent of the total merchandise), and which are continuously shaped wood that undergoes additional manufacturing or finger-jointed or edge-glued moulding or millwork blanks (whether or not resawn).

The percentage of composite materials contained in a wood moulding or millwork product is measured by length, except when the composite material is a coating or cladding. Wood mouldings and millwork products that are coated or clad, even along their entire length, with a composite material, but that are otherwise comprised of wood, LVL, or wood and composite materials (where the non-coating composite materials make up 50 percent or less of the total merchandise) are covered by the scope.

The merchandise subject to this investigation consists of wood, LVL, bamboo, or a combination of wood and composite materials that is continuously shaped throughout its length (with the exception of any endwork/dados), profiled wood having a repetitive design in relief, similar milled wood architectural accessories, such as rosettes and plinth blocks, and finger-jointed or edge-glued moulding or millwork blanks (whether or not resawn). The scope includes continuously shaped wood in the forms of dowels, building components such as interior paneling and jamb parts, and door components such as rails and stiles.

The covered products may be solid wood, laminated, finger-jointed, edge-glued, face-glued, or otherwise joined in the production or remanufacturing process and are covered by the scope whether imported raw, coated (e.g., gesso, polymer, or plastic), primed, painted, stained, wrapped (paper or vinyl overlay), any combination of the aforementioned surface coatings, treated, or which incorporate rot-resistant elements (whether wood or composite). The covered products are covered by the scope whether or not any surface coating(s) or covers obscures the grain, textures, or markings of the wood, whether or not they are ready for use or require final machining (e.g., endwork/dado, hinge/strike machining, weatherstrip or application thereof, mitre) or packaging.

All wood mouldings and millwork products are included within the scope even if they are trimmed; cut-to-size; notched; punched; drilled; or have undergone other forms of minor processing.

Subject merchandise also includes wood mouldings and millwork products that have been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, coating, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope product.

Excluded from the scope of this investigation are exterior fencing, exterior decking and exterior siding products (including solid wood siding, non-wood siding (e.g., composite or cement), and shingles) that are not LVL or finger jointed; finished and unfinished doors; flooring; parts of stair steps (including newel posts, balusters, easing, gooseneck, risers, treads and rail fittings); and picture frame components three feet and under in individual lengths.

Excluded from the scope of this investigation are all products covered by the scope of the antidumping and countervailing duty orders on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018); Certain Hardwood Plywood Products from the People's Republic of China: Countervailing Duty Order, 83 FR 513 (January 4, 2018).

Excluded from the scope of this investigation are all products covered by the scope of the antidumping and countervailing duty orders on Multilayered Wood Flooring from the People's Republic of China. See Multilayered Wood Flooring from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order, 76 FR 76690 (December 8, 2011); Multilayered Wood Flooring from the People's Republic of China: Countervailing Duty Order, 76 FR 76693 (December 8, 2011).

Imports of wood mouldings and millwork products are primarily entered under the following Harmonized Tariff Schedule of the United States (HTSUS) numbers: 4409.10.4010, 4409.10.4090, 4409.10.4500, 4409.10.5000, 4409.22.4000, 4409.22.5000, 4409.29.4100, and 4409.29.5100. Imports of wood mouldings and millwork products may also enter under HTSUS numbers: 4409.10.6000, 4409.10.6500, 4409.22.6000, 4409.22.6500, 4409.29.6100, 4409.29.6600, 4418.99.9095 and 4421.99.9780. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Alignment

IV. Injury Test

V. Diversification of China's Economy

VI. Use of Facts Otherwise Available and Adverse Inferences

VII. Subsidies Valuation

VIII. Benchmarks and Interest Rates

IX. Analysis of Programs

X. Recommendation

Footnotes

1.  See Wood Mouldings and Millwork Products from the People's Republic of China: Initiation of Countervailing Duty Investigation, 85 FR 6513 (February 5, 2020) (Initiation Notice).

2.  See Wood Mouldings and Millwork Products from the People's Republic of China: Postponement of Preliminary Determination of Antidumping Duty Investigation, 85 FR 15433 (March 12, 2020).

3.  See Memorandum, “Decision Memorandum for the Preliminary Determination of the Countervailing Duty Investigation of Wood Mouldings and Millwork Products from the People's Republic of China,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

4.  See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997).

5.  See Initiation Notice.

6.  See sections 771(5)(B) and (D) of the Act regarding financial contribution; section 771(5)(E) of the Act regarding benefit; and section 771(5A) of the Act regarding specificity.

7.  See sections 776(a) and (b) of the Act.

8.  See Petitioner's Letter, “Request to Align Countervailing Duty Investigation Final Determination with Antidumping Duty Investigation Final Determination,” dated May 4, 2020.

9.  As discussed in the Preliminary Decision Memorandum, Commerce determines that Yinfeng Fujian Province Youxi City Mangrove Wood Machining Co., Ltd. and Fujian Province Youxi City Mangrove Wood Machining Co., Ltd., Xicheng Branch are cross-owned affiliates of mandatory respondent Yinfeng.

10.  See, generally, 19 CFR 351.309 and 19 CFR 351.303 (for general filing requirements). See also Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19, 85 FR 17006 (March 26, 2020) and Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19; Extension of Effective Period, 85 FR 29615 (May 18, 2020).