96-15524. Notice of Receipt of Petition for Decision That Nonconforming 1993, 1995, and 1996 Porsche Carrera 2-Door Passenger Cars are Eligible for Importation  

  • [Federal Register Volume 61, Number 119 (Wednesday, June 19, 1996)]
    [Notices]
    [Pages 31216-31217]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 96-15524]
    
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF TRANSPORTATION
    [Docket No. 96-064; Notice 1]
    
    
    Notice of Receipt of Petition for Decision That Nonconforming 
    1993, 1995, and 1996 Porsche Carrera 2-Door Passenger Cars are Eligible 
    for Importation
    
    AGENCY: National Highway Traffic Safety Administration, DOT.
    
    ACTION: Notice of receipt of petition for decision that nonconforming 
    1993, 1995, and 1996 Porsche Carrera 2-door passenger cars are eligible 
    for importation.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This notice announces receipt by the National Highway Traffic 
    Safety Administration (NHTSA) of a petition for a decision that 1993, 
    1995, and 1996 Porsche Carrera 2-door passenger cars that were not 
    originally manufactured to comply with all applicable Federal motor 
    vehicle safety standards are eligible for importation into the United 
    States because (1) they are substantially similar to vehicles that were 
    originally manufactured for importation into and sale in the United 
    States and that were certified by their manufacturer as complying with 
    the safety standards, and (2) they are capable of being readily altered 
    to conform to the standards.
    
    DATES: The closing date for comments on the petition is July 19, 1996.
    
    ADDRESSES: Comments should refer to the docket number and notice 
    number, and be submitted to: Docket Section, Room 5109, National 
    Highway Traffic Safety Administration, 400 Seventh St., SW, Washington, 
    DC 20590. [Docket hours are from 9:30 am to 4 pm]
    
    FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle 
    Safety Compliance, NHTSA (202-366-5306).
    
    SUPPLEMENTARY INFORMATION:
    
    Background
    
        Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i)(I) 
    of the National Traffic and Motor Vehicle Safety Act (the act)), a 
    motor vehicle that was not originally manufactured to conform to all 
    applicable Federal motor vehicle safety standards shall be refused 
    admission into the United States unless NHTSA has decided that the 
    motor vehicle is substantially similar to a motor vehicle originally 
    manufactured for importation into and sale in the United States, 
    certified under 49 U.S.C. 30115 (formerly section 114 of the act), and 
    of the same model year as the model of the motor vehicle to be 
    compared, and is capable of being readily altered to conform to all 
    applicable Federal motor vehicle safety standards.
        Petitions for eligibility decisions may be submitted by either 
    manufacturers or importers who have registered with NHTSA pursuant to 
    49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
    in the Federal Register of each petition that it receives, and affords 
    interested persons an opportunity to comment on the petition. At the 
    close of the comment period, NHTSA decides, on the basis of the 
    petition and any comments that it has received, whether the vehicle is 
    eligible for importation. The agency then publishes this decision in 
    the Federal Register.
        G&K Automotive Conversion, Inc. of Santa Ana, California (``G&K'') 
    (Registered Importer 90-007) has petitioned NHTSA to decide whether 
    1993, 1995, and 1996 Porsche Carrera 2-door passenger cars are eligible 
    for importation into the United States. The vehicles which G&K believes 
    are substantially similar are the 1993, 1995, and 1996 Porsche Carrera 
    2-door passenger cars that were manufactured for importation into, and 
    sale in, the United States and certified by their manufacturer as 
    conforming to all applicable Federal motor vehicle safety standards.
        The petitioner claims that it carefully compared the non-U.S. 
    certified 1993, 1995, and 1996 Porsche Carrera 2-door passenger cars to 
    their U.S. certified counterparts, and found the vehicles to be 
    substantially similar with respect to compliance with most Federal 
    motor vehicle safety standards.
        G&K submitted information with its petition intended to demonstrate 
    that the non-U.S. certified 1993, 1995, and 1996 Porsche Carrera 2-door 
    passenger cars, as originally manufactured, conform to many Federal 
    motor vehicle safety standards in the same manner as their U.S. 
    certified counterparts, or are capable of being readily altered to 
    conform to those standards.
        Specifically, the petitioner claims that the non-U.S. certified 
    1993, 1995, and 1996 Porsche Carrera 2-door passenger cars are 
    identical to their U.S. certified counterparts with respect to 
    compliance with Standards Nos. 102 Transmission Shift Lever Sequence. . 
    . ., 103 Defrosting and Defogging Systems, 104 Windshield Wiping and 
    Washing Systems, 105 Hydraulic Brake Systems, 106 Brake Hoses, 107 
    Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood Latch Systems, 
    116 Brake Fluid, 124 Accelerator Control Systems, 201 Occupant 
    Protection in Interior Impact, 202 Head Restraints, 203 Impact 
    Protection for the Driver From the Steering Control System, 204 
    Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door 
    Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt 
    Assemblies, 210 Seat Belt Assembly Anchorages, 211 Wheel Nuts, Wheel 
    Discs and Hubcaps, 212 Windshield Retention, 216 Roof Crush Resistance, 
    219 Windshield Zone Intrusion, and 302 Flammability of Interior 
    Materials.
        Petitioner also contends that the vehicles are capable of being 
    readily altered to meet the following standards, in the manner 
    indicated:
        Standard No. 101 Controls and Displays: (a) substitution of a lens 
    marked ``Brake'' for a lens with an ECE symbol on the brake failure 
    indicator lamp; (b) placement of a seat belt warning symbol on the seat 
    belt warning lamp; (c) recalibration of the speedometer/odometer from 
    kilometers to miles per hour.
        Standard No. 108 Lamps, Reflective Devices and Associated 
    Equipment: (a) installation of U.S.-model headlamps and front 
    sidemarkers; (b) installation of U.S.-model taillamp lenses which 
    incorporate rear sidemarkers; (c) installation of a high mounted stop 
    lamp.
        Standard No. 110 Tire Selection and Rims: installation of a tire 
    information placard.
        Standard No. 111 Rearview Mirror: replacement of the passenger side 
    convex rearview mirror with a U.S.-model component.
        Standard No. 114 Theft Protection: installation of a warning buzzer 
    microswitch and a warning buzzer in the steering lock assembly.
        Standard No. 115 Vehicle Identification Number: installation of a 
    VIN plate that can be read from outside the left windshield pillar, and 
    a VIN reference label on the edge of the door or latch post nearest the 
    driver.
        Standard No. 118 Power Window Systems: rewiring of the power window 
    system so that the window transport is inoperative when the ignition is 
    switched off.
        Standard No. 208 Occupant Crash Protection: installation of a seat 
    belt warning buzzer. The petitioner states that the vehicle is equipped 
    with driver's and passenger's side air bags
    
    [[Page 31217]]
    
    and knee bolsters, and with Type 2 seat belts in all designated seating 
    positions.
        Standard No. 214 Side Impact Protection: installation of door 
    beams.
        Standard No. 301 Fuel System Integrity: installation of a rollover 
    valve in the fuel tank vent line between the fuel tank and the 
    evaporative emissions collection canister.
        Additionally, the petitioner states that the bumpers on the non-
    U.S. certified 1993, 1995, and 1996 Porsche Carrera 2-door passenger 
    cars must be reinforced to comply with the Bumper Standard found in 49 
    CFR Part 581.
        Interested persons are invited to submit comments on the petition 
    described above. Comments should refer to the docket number and be 
    submitted to: Docket Section, National Highway Traffic Safety 
    Administration, Room 5109, 400 Seventh Street, S.W., Washington, DC 
    20590. It is requested but not required that 10 copies be submitted.
        All comments received before the close of business on the closing 
    date indicated above will be considered, and will be available for 
    examination in the docket at the above address both before and after 
    that date. To the extent possible, comments filed after the closing 
    date will also be considered. Notice of final action on the petition 
    will be published in the Federal Register pursuant to the authority 
    indicated below.
    
        Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
    delegations of authority at 49 CFR 1.50 and 501.8.
    
        Issued on: June 13, 1996.
    Marilynne Jacobs,
    Director, Office of Vehicle Safety Compliance.
    [FR Doc. 96-15524 Filed 6-18-96; 8:45 am]
    BILLING CODE 4910-59-P
    
    

Document Information

Published:
06/19/1996
Department:
Transportation Department
Entry Type:
Notice
Action:
Notice of receipt of petition for decision that nonconforming 1993, 1995, and 1996 Porsche Carrera 2-door passenger cars are eligible for importation.
Document Number:
96-15524
Dates:
The closing date for comments on the petition is July 19, 1996.
Pages:
31216-31217 (2 pages)
Docket Numbers:
Docket No. 96-064, Notice 1
PDF File:
96-15524.pdf