2011-15246. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from February 1, 2011 to April 22, 2011, and provides the required notice and status report, consists of the PMNs and TMEs, both pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before July 21, 2011.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2011-0496, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov,, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov Web site is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov,, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; fax number: [phone]; e-mail address: [e-mail].

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA taking this action?

EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/​opptintr/​newchems/​pubs/​inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/​opt/​newchems.

Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from February 1, 2011 to April 22, 2011, consists of the PMNs and TMEs, both pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Reports

In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.

Table I—149 PMNs Received From February 1, 2011 to April 22, 2011

Case No.	Received date	Projected notice end date	Manufacturer/ importer	Use	Chemical
P-11-0190	02/02/11	05/02/11	CBI	(G) Paper additive	(G) Dialdehyde, reaction products with hydrolyzed n-vinylamide homopolymer hydrohalides.
P-11-0191	02/01/11	05/01/11	CBI	(S) Ultra violet curable polymer for kitchen cabinets and office furniture finishes	(G) Ultra violet curable polyester polyurethane acrylate.
P-11-0192	02/02/11	05/02/11	CBI	(G) Additive for paper	(G) Amphoteric polyacrylamide.
P-11-0193	02/02/11	05/02/11	CBI	(G) Deposit control additive for fuels	(G) Poly alkyl amido hydrazide.
P-11-0194	02/02/11	05/02/11	CBI	(G) Plasticizer	(S) 1,2,3-propanetricarboxylic acid, 2-(acetyloxy)-, 1,2,3-tris(2-ethylhexyl) ester.
P-11-0195	02/03/11	05/03/11	3M	(S) Prepolymer for sprayable adhesive/sealant; prepolymer for high viscosity adhesive/sealant	(G) Alkoxysilyl polyether prepolymer.
P-11-0196	02/08/11	05/08/11	Croda Inc.	(G) Hard surface cleaner	(G) Quaternized ethylene oxide propylene oxide polymer.
P-11-0197	02/08/11	05/08/11	CBI	(G) Colourant dispersant	(G) Acrylic polymer.
P-11-0198	02/08/11	05/08/11	CBI	(G) Colourant dispersant	(G) Acrylic polymer.
P-11-0199	02/08/11	05/08/11	CBI	(G) Colourant dispersant	(G) Acrylic polymer.
P-11-0200	02/07/11	05/07/11	CBI	(G) Resin solution additive	(G) Aluminum alkoxide complex, alkoxylated aluminum chelate.
P-11-0201	02/09/11	05/09/11	Lubrigreen	(G) Bio-based lubricant base oil	(S) Fatty acids, C8-18 and C18-unsaturated, reaction products with isomerized oleic acid homopolymer.
P-11-0202	02/09/11	05/09/11	Lubrigreen	(G) Bio-based lubricant base oil	(S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer.
P-11-0203	02/09/11	05/09/11	CBI	(G) Paper treatment	(G) Perfluoroalkylethyl methacrylate copolymer, salt.
P-11-0204	02/11/11	05/11/11	CBI	(S) Brightener for nickel electroplating	(G) Acetaldehyde, substituted-, reaction products with 2-butyne-1,4-diol.
P-11-0205	02/15/11	05/15/11	CBI	(G) Non-dispersive ink additive	(G) Polyalkene, maleated potassium salts.
P-11-0206	02/15/11	05/15/11	Eastman Kodak Company	(G) Intermediate	(G) Bisaryl iodonium salt.
P-11-0207	02/15/11	05/15/11	Eastman Kodak Company	(G) Contained use in an article	(G) Substituted aromatic borate salt.
P-11-0208	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, C8-18 and C18-unsaturated, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester.
P-11-0209	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester.
P-11-0210	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, C8-18 and C18-unsaturated, reaction products with isomerized oleic acid dimer 2-ethylhexyl ester.
P-11-0211	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, coco, reaction products with isomerized oleic acid dimer 2-ethylhexyl ester.
P-11-0212	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) 9-octadecenoic acid (9z)-, homopolymer, isomerized.
P-11-0213	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, C8-18 and C18-unsaturated, reaction products with isomerized oleic acid homopolymer.
P-11-0214	02/16/11	05/16/11	Lubrigreen	(G) Lubricant base oil	(S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer.
P-11-0215	02/16/11	05/16/11	CBI	(G) Base polymer for adhesive	(S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0216	02/16/11	05/16/11	CBI	(G) Base polymer for adhesive	(S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with butyl 2-propenoate, methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0217	02/17/11	05/17/11	CBI	(G) Additive, open, non-dispersive	(G) Polyetherfluoro urethane.
P-11-0218	02/17/11	05/17/11	CBI	(G) Radiation curing agent	(G) Benzenedioic acid, polymer with alkanediol and carboxyaminoalkyl carbamic acid alkoxyalkylester.
P-11-0219	02/18/11	05/18/11	CBI	(G) Paint	(G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0220	02/18/11	05/18/11	CBI	(G) Paint	(G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0221	02/18/11	05/18/11	CBI	(G) Paint	(G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0222	02/18/11	05/18/11	CBI	(G) Paint	(G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, and styrene, peroxide-initiated.
P-11-0223	02/18/11	05/18/11	CBI	(G) Use as photoinitiator	(G) Substituted tris-phenyl thiophenyl-sulfonium halogenide.
P-11-0224	02/22/11	05/22/11	CBI	(S) Electrolyte for battery	(G) Fluoro ether.
P-11-0225	02/23/11	05/23/11	CBI	(G) Adhesive component	(S) Amines, C36-alkylenedi-, polymers with 6-aminohexanoic acid, 1,6-diisocyanato-2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4-trimethylhexane, 5,5'-[(1-methylethylidene)bis(4,1-phenyleneoxy)]bis[1,3-isobenzofurandione] and pyromellitic dianhydride, 2,5-dihydro-2,5-dioxo-1h-pyrrole-1-hexanoic acid-blocked.
P-11-0226	02/23/11	05/23/11	CBI	(G) As a component of adhesives and Cosmetics	(G) N-(2-hydroxyethyl) alkenamide.
P-11-0227	02/23/11	05/23/11	CBI	(G) Coatings	(G) Urethane acrylate.
P-11-0228	02/22/11	05/22/11	CBI	(S) Used internally as raw material for polyamide manufacture	(G) Benzaldehyde, reaction products with polyalkylenepolyamines, hydrogenated.
P-11-0229	02/24/11	05/24/11	H.B. Fuller	(G) Industrial adhesive	(G) Polyester, polymer with 1,4-butanediol, dodecanedioic, 1,6-heaxanediol, .alpha.-hydro-.omega.-hydroxypoly (oxy-1,4-butanediyl) and isocyanate.
P-11-0230	02/24/11	05/24/11	Goulston technologies, Inc.	(G) Antistatic agent for acrylic yam	(G) Alkyl amine salt.
P-11-0231	02/25/11	05/25/11	Cardolite Corporation	(S) Amine based epoxy curing agent for 2 part epoxy surface coating	(G) Cashew nutshell liquid amine polymer.
P-11-0232	02/28/11	05/28/11	CBI	(G) Sealant and adhesive	(G) Acryloxy functional siloxane.
P-11-0233	02/25/11	05/25/11	CBI	(S) Curing agent for epoxy resin	(G) Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2-(chloromethyl)oxirane, reaction products with n3-(3-(dimethylamino)propyl]-n1,n1-dimethyl-alkanepolyamine, compounds with formaldehyde-phenol polymer.
P-11-0234	03/01/11	05/29/11	CBI	(G) Chemical intermediate	(G) Oligmeric phenolic ether.
P-11-0235	03/01/11	05/29/11	CBI	(G) Ink, coating, adhesive	(G) Polyacrylate oligomer product from saturated dimer acid, propoxylated glycerol and acrylic acid.
P-11-0236	03/01/11	05/29/11	CBI	(G) Ink, coating, adhesive	(G) Polyacrylate oligomer product from saturated dimer acid, propoxylated glycerol and acrylic acid.
P-11-0237	03/02/11	05/30/11	Colonial Chemical, Inc.	(S) Oil dispersant	(S) D-glucopyranose, oligomeric, decyl octyl glycosides, polymer with 1,3-dichloro-2-propanol and sorbitan mono-(9z)-9-octadecenoate.
P-11-0238	03/01/11	05/29/11	IGM Resins Inc.	(G) Ultra violet initiator	(S) Poly(oxy-1,2-ethanediyl), .alpha.-[2-(4-benzoylphenoxy)acetyl]-.omega.-[[2-(4-benzoylphenoxy)acetyl]oxy]-.
P-11-0239	03/02/11	05/30/11	CBI	(G) Emulsifier	(G) Butanedioic acid, monopolyisobutylene derivates, (alkylimino)di-2,1-ethanediyl esters, compounds with akylamino alcohol(1:2).
P-11-0240	03/02/11	05/30/11	CBI	(G) Component of an industrial adhesive	(G) Modified epoxy resin.
P-11-0241	03/04/11	06/01/11	CBI	(G) Used to adjust (retard) set times in calcium sulfate based binders such as gypsum boards, plaster boards or wall boards	(S) L-lysine, n2, n6-bis (3-carboxy-1-oxopropyl)-, sodium salt (1:3).
P-11-0242	03/04/11	06/01/11	Materia Inc.	(G) Resin formulation additive	(G) Hydroxy-olefin.
P-11-0243	03/07/11	06/04/11	CBI	(G) Thermoplastic urethane	(G) Aliphatic thermoplastic urethane.
P-11-0244	03/07/11	06/04/11	CBI	(G) Thermoplastic urethane	(G) Aliphatic thermoplastic urethane.
P-11-0245	03/07/11	06/04/11	CBI	(G) Concrete additive	(G) Alkoxylate polymer, mono(alkenyl) ether.
P-11-0246	03/08/11	06/05/11	Oleon Americas Inc.	(S) Emulsifier for commercial (I&I) and household floor cleaners	(S) D-xylopyranose, oligomeric, C16-18-alkyl glycosides.
P-11-0247	03/04/11	06/01/11	CBI	(G) Treatment for textiles	(G) Perfluoroalkylethyl methacrylate copolymer.
P-11-0248	03/08/11	06/05/11	CBI	(G) Printing additive	(G) Roin, polymer with ethylene glycol, propanediol, alkanedicarboxylic acid, terephthalic acid and trimellitic anhydride.
P-11-0249	03/08/11	06/05/11	CBI	(G) Resin for use in coatings	(G) Acrylic latex.
P-11-0250	03/09/11	06/06/11	Henkel Corporation	(S) Cure initiator in adhesive formulations	(S) Benzamide, n-(aminothioxomethyl)-.
P-11-0251	03/10/11	06/07/11	CBI	(G) Printing inks	(G) Cycloaliphatic anhydride polymer with alkyldiol.
P-11-0252	03/10/11	06/07/11	CBI	(G) Photografic chemical	(G) Benzeneacetonitrile, alkoxy-[[(alkylsulfonyl)oxy]imino]-.
P-11-0253	03/10/11	06/07/11	Dow Chemical Company	(G) Detergents and cleaner additive	(G) Acrylic copolymer.
P-11-0254	03/09/11	06/06/11	H.B. Fuller	(G) Industrial adhesive	(G) Alkanedioic acid, polymer with ethenyl acetate, alkyl 2-propenoate, and 2-propenoic acid.
P-11-0255	03/10/11	06/07/11	Colonial Chemical, Inc.	(S) Hard surface cleaner in high caustic solutions	(S) D-glucopyranose, oligomeric, decyl octyl glycosides, 2,3-dihydroxypropyl ethers, phosphates, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0256	03/10/11	06/07/11	Colonial Chemical, Inc.	(S) Hard surface cleaner in high caustic solutions	(S) D-glucopyranose, oligomeric, c10-16-alkyl glycosides, 2,3-dihydroxypropyl ethers, phosphates, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0257	03/10/11	06/07/11	Nanotech Industries, Inc.	(S) Flooring; paints; top coating	(S) Carbamic acid, N,N'-(trimethyl-1,6-hexanediyl)bis-, ester with 1,2-propanediol (1:2).
P-11-0258	03/10/11	06/07/11	CBI	(G) Curing agent for epoxy resin	(G) Epoxy and isocyanate modified aliphatic polyamine.
P-11-0259	03/04/11	06/01/11	CBI	(G) Flexible packaging adhesive	(G) Polyether polyester polyurethane adhesive.
P-11-0260	03/11/11	06/08/11	CBI	(G) Urethane adhesive	(G) Isocyanate-terminated prepolymer.
P-11-0261	03/16/11	06/13/11	Global Tungsten and Powders Corp.	(S) Luminescent phosphor for use in fluorescent lamp manufacturing	(S) Aluminum barium europium magnesium oxide.
P-11-0262	03/16/11	06/13/11	Global Tungsten and Powders Corp.	(S) Luminescent phosphor for use in fluorescent lamp manufacture	(S) Europium strontium borate metaphosphate oxide.
P-11-0263	03/15/11	06/12/11	CBI	(G) Curing agent for epoxy resin	(G) Modified aliphatic polyamine.
P-11-0264	03/17/11	06/14/11	CBI	(G) Flame retardant	(G) Brominated aromatic oligomer.
P-11-0265	03/17/11	06/14/11	CBI	(G) Antistatic additive in polymers, antistatic additive in liquid resins	(G) Dialkyl imidazolium salt.
P-11-0266	03/17/11	06/14/11	CBI	(G) Industrial lubricant	(G) Polypentaerythritol, mixed esters with straight and branched monoacids.
P-11-0267	03/18/11	06/15/11	Hybrid Plastics, Inc.	(G) Thermoplastics and coatings additive; elastomer additive	(S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol-1,3,5,7,9,11,14-heptakis(2,4,4-trimethylpentyl)-.
P-11-0268	03/21/11	06/18/11	CBI	(G) Flame retardant	(G) Phosphoric acid, diaryl alkyl ester.
P-11-0269	03/21/11	06/18/11	CBI	(G) Optical material component	(G) Perfluorinated cyclo oxyaliphatic polymer.
P-11-0270	03/21/11	06/18/11	Lockheed Martin	(S) Piezoelectric ceramics used for active and passive underwater acoustic systems	(S) Lead strontium titanium zirconium oxide.
P-11-0271	03/21/11	06/18/11	Lockheed Martin	(S) Piezoelectric ceramics used for active and passive underwater acoustic systems.	(S) Calcium cobalt lead titanium tungsten oxide.
P-11-0272	03/21/11	06/18/11	Lockheed Martin	(S) Piezoelectric ceramics used for active and passive underwater acoustic systems	(S) Calcium cobalt lead strontium titanium tungsten oxide.
P-11-0273	03/21/11	06/18/11	Lockheed Martin	(S) Piezoelectric ceramics used for active and passive underwater acoustic systems	(S) Lanthanum lead titanium zirconium oxide.
P-11-0274	03/21/11	06/18/11	Lockheed Martin	(S) Piezoelectric ceramics used for active and passive underwater acoustic systems	(S) Lead niobium titanium zirconium oxide.
P-11-0275	03/23/11	06/20/11	CBI	(G) Coating applications	(G) Hydroxy alkyl alkyl acrylate, polymer with alkyl acrylate, aromatic vinyl monomer, dialkyl acrylate and alkyl alkyl acrylate.
P-11-0276	03/24/11	06/21/11	Mane, USA	(G) Perfumery ingredient	(S) 1,5-cyclododecadiene, 10-methoxy-1,5,9-trimethyl- 1,5-cyclododecadiene, 9-methoxy-1,5,10-trimethyl- 1,5-cyclododecadiene, 9-methoxy-1,6,10-trimethyl- 1,5-cylcododecadiene, 9-methoxy-2,5,10-trimethyl-.
P-11-0277	03/24/11	06/21/11	Zeon Chemicals L.P.	(S) Automotive seals and gaskets	(G) Modified acrylonitrile, butadiene polymer, hydrogenated.
P-11-0278	03/24/11	06/21/11	Cytec Industries Inc.	(G) Coatings resin	(G) Heteromonocycle, polymer with disubstituted carbomonocyle and alkylene glycol, alkyl acrylate blocked.
P-11-0279	03/24/11	06/21/11	CBI	(S) Automotive coatings	(G) Polyester resin.
P-11-0280	03/25/11	06/22/11	Cytec Industries Inc.	(G) Coating resin	(G) Epoxy modified alkyd resin, partially neutralized.
P-11-0281	03/25/11	06/22/11	CBI	(S) Lubricant additive for the purposes of anti corrosion, viscosity control and dispersant improver	(S) Fatty acids, lanolin, esters with cholesterol-low lanolin alcs.
P-11-0282	03/25/11	06/22/11	CBI	(S) Lubricant additive for the purposes of anti corrosion, viscosity control and dispersant improver	(S) Fatty acids, C10-30, esters with cholesterol-low lanolin alcs.
P-11-0283	03/25/11	06/22/11	3M Company	(G) Surfactant	(G) Oleate.
P-11-0284	03/25/11	06/22/11	3M Company	(G) Surfactant	(G) Oleyl acrylate.
P-11-0285	03/28/11	06/25/11	CBI	(G) Coating additive	(G) Acid anhydride, polymer with aromatic isocyanate and polyalkyleneglycol, alkanol and diazole alkanamine and lactone homopolymer alkyl ester-blocked.
P-11-0286	03/28/11	06/25/11	CBI	(G) Open, non-dispersive	(G) Blocked polyester polyurethane, neutralized.
P-11-0287	03/28/11	06/25/11	CBI	(G) Open, non-dispersive use	(G) Acrylic silane polymer.
P-11-0288	03/25/11	06/22/11	CBI	(S) Photoinitiator	(G) Biphenyl alkyl morpholino ketone.
P-11-0289	03/28/11		Oleon Americas Inc.	(S) Additive (tracer) for natural fats and oils	(S) Heptanoic acid, 1,2,3-propanetriyl ester (9ci).
P-11-0290	03/29/11	06/26/11	Scnte LLC	(G) The material will be used as the sensor element in an electrochemical sensor. one carbon nanotube-sic device will be use per one sensor. the maximum estimated annual quantity of sensors will be 10,000. this completed sensor will be able to detect metals and nutrients in water	(G) Carbon nanotubes.
P-11-0291	03/28/11	06/25/11	CBI	(G) For use as an exterior coating for food containers	(G) Polyester resin.
P-11-0292	03/29/11	06/26/11	Colonial Chemical, Inc.	(S) Hard surface cleaner in high caustic solutions	(S) D-glucopyronase, oligomeric, decyl octyl glycosides, 2-hydroxy-3-sulfopropyl ethers, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0293	03/29/11	06/26/11	Colonial Chemical, Inc.	(S) Hard surface cleaner in high caustic solutions	(S) D-glucopyronase, oligomeric, C10-16-alkyl glycosides, 2-hydroxy-3-sulfopropyl ethers, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0294	03/30/11	06/27/11	CBI	(G) Open, non-dispersive use (polycarbonate)	(G) Polycarbonate.
P-11-0295	03/30/11	06/27/11	CBI	(G) The PMN substance will be used as a component in detergents, a corrosion inhibitor in multiple applications, and a concrete additive	(G) Reaction product from the oxidation of D-glucose, neutralized with naoh.
P-11-0296	03/30/11	06/27/11	CBI	(G) The PMN substance will be used as a component in detergents, a corrosion inhibitor in multiple applications, and a concrete additive	(G) Reaction products from the oxidation of d-glucose, neutralized with sodium hydroxide and potassium hydroxide.
P-11-0297	04/04/11	07/02/11	CBI	(G) Open, non-dispersive use	(G) Azo dyestuff.
P-11-0298	04/04/11	07/02/11	Dow Chemical Company	(S) Hardener for epoxy thermosetting coatings	(G) Ethoxylated epoxy amine polymer.
P-11-0299	04/04/11	07/02/11	Dow Chemical Company	(S) Hardener for epoxy thermosetting coatings	(G) Polypropylene glycol, epoxy amine polymer.
P-11-0300	04/04/11	07/02/11	CBI	(S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant	(G) Aromatic polyester polyol.
P-11-0301	04/04/11	07/02/11	CBI	(S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant	(G) Aromatic polyester polyol
P-11-0302	04/04/11	07/02/11	CBI	(S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant	(G) Aromatic polyester polyol.
P-11-0303	04/04/11	07/02/11	CBI	(S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant	(G) Aromatic polyester polyol.
P-11-0304	04/04/11	07/02/11	CBI	(S) Reactant in the manufacture of polyurethane and polyisocyanurate rigid foams; polyol resin blend with additives for polyurethane b-side reactant	(G) Aromatic polyester polyol.
P-11-0305	04/04/11	07/02/11	King Industries, Inc.	(G) Resin modifier for thermoplastic polyurethane elastomers	(G) Polyester diol.
P-11-0306	04/04/11	07/02/11	CBI	(S) Acrylic resin used in ultra violet curable inks and coatings	(G) Tertiary amine acrylate.
P-11-0307	04/04/11	07/02/11	Cardolite Corporation	(S) Epoxy curing agent	(G) Cashew nutshell liquid amine polymer.
P-11-0308	04/05/11	07/03/11	Dow Chemical Company	(G) Dispersant	(G) Acrylic polymer.
P-11-0309	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with polyether polyol, 1,1'-methylenebis[4-isocyanatobenzene] and dihydroxydialkyl ether.
P-11-0310	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with polyether polyol, 1,1'-methylenebis[isocyanatobenzene] and dihydroxydialkyl ether.
P-11-0311	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[4-isocyanatobenzene], dihydroxydialkyl ether and dialkanol ether.
P-11-0312	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[isocyanatobenzene], dihydroxydialkyl ether and dialkanol ether.
P-11-0313	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[4-isocyanatobenzene], and dihydroxydialkyl ether, reaction products with dialkylcarbinol.
P-11-0314	04/06/11	07/04/11	H.B. Fuller Company	(G) Industrial adhesive	(G) Hexanedioic acid, polymer with A-hydro-W-hydroxypoly [oxy (methyl-1,2-ethanediyl)], 1,1'-methylenebis[isocyanatobenzene] , and dihydroxydialkyl ether, reaction products with dialkylcarbinol.
P-11-0315	04/07/11	07/05/11	K+A North America	(S) Fertilizer additive	(S) 1H-pyrazole, 3,4-dimethyl-, phosphate(1:1).
P-11-0316	04/07/11	07/05/11	Ascend Performance Materials, LLC	(G) Industrial solvent, in (closed and open systems. accelerant in permitted industrial explosives	(S) Cyclohexane, oxidized, by-products from, distillation residues.
P-11-0317	04/08/11	07/06/11	Lubrizol Corporation	(G) Lubricant additive	(G) Formaldehyde, reaction products with ethylene-maleic anhydride-propene polymer, aryl amine and succinic anhydride monopolyisobutylene derivates.
P-11-0318	04/11/11	07/09/11	CBI	(G) Additive	(G) Perfluoro multiphenylbenzene.
P-11-0319	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Polyester polyether urethane block copolymer.
P-11-0320	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Polyester polyether urethane block copolymer.
P-11-0321	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Polyester polyether urethane block copolymer.
P-11-0322	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Siloxanes and silicones, methyl alkyl, polyether modified.
P-11-0323	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Siloxanes and silicones, methyl alkyl, polyether modified.
P-11-0324	04/11/11	07/09/11	CBI	(G) Additive, open, non-dispersive	(G) Siloxanes and silicones, methyl alkyl, polyester modified.
P-11-0325	04/13/11	07/11/11	CBI	(G) Battery component manufacturing	(G) Beta alumina powder.
P-11-0326	04/13/11	07/11/11	CBI	(G) Cleaning additive for cpu manufacturing	(G) Glycerylether.
P-11-0327	04/14/11		Kior	(G) Distillation feedstock after hydrotreatment	(S) Distillates (lignocellulosic), C5-40.
P-11-0328	04/14/11		Kior	(G) Feedstock	(S) Parraffin waxes (lignocellulosic), hydrotreated, C5-40-branched, cyclic and linear.
P-11-0329	04/14/11		Kior	(S) Hydrotreated lignocellulosic naphtha will be used as blendstock for conventional fossil fuels	(S) Naphtha (lignocellulosic), hydrotreated, C5-12-branched, cyclic and linear.
P-11-0330	04/14/11		Kior	(S) Hydrotreated lignocellulosic kerosene will be used as blendstock for conventional fossil fuels	(S) Kerosine (lignocellulosic), hydrotreated, C8-16-branched,cyclic and linear.
P-11-0331	04/14/11		Kior	(S) Hydrotreated lignocellulosic distillate will be used as blendstock for conventional fossil fuels	(S) Distillates (lignocellulosic), hydrotreated, C8-26-branched, cyclic, and linear.
P-11-0332	04/14/11		Kior	(S) Intended for use in a manner comparable to gas oil as it is currently used in industry	(S) Residual oils (lignocellulosic), hydrotreated, C20-40-branched, cyclic and linear.
P-11-0333	04/14/11		CBI	(G) Component of industrial coating	(G) Phosphated polyester.
P-11-0334	04/15/11		CBI	(G) An open non-dispersive use in ink	(G) Aliphatic and alicyclic alcohol type polyester.
P-11-0335	04/15/11		CBI	(G) Cross-linker	(G) Methyl, phenyl, amino-functional siloxanes and silsesquioxane.
P-11-0337	04/19/11		CBI	(S) Ingredient in fragance compound	(S) 4,7-decadienal.
P-11-0338	04/21/11		CBI	(S) Photoinitiator	(G) Biphenyl alkyl morpholino ketone.
P-11-0339	04/22/11	07/20/11	Southwest Nanotechnologies Inc.	(S) Additives for resins, thermoplastics, and elastomers for mechanical reinforcement and enhanced electrical properties; coatings on metallic foils for battery applications; manufacture of fabric composites using mwnt	(S) Multi-wall carbon nanotube also know as—mwnt (multi-wall carbon nanotube), smwcnt (specialty multi-wall carbon nanotube), and smwxxx and where xxx represents our identifier for a new generation of the same products.
P-11-0340	04/22/11	07/20/11	CBI	(G) Reactant	(G) Formaldehyde polymer with reaction products of alkylated phenol and polyalkyltriamine.

In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity.

Table II—2 TMEs Received From February 1, 2011 to April 22, 2011

Case No.	Received date	Projected review end date	Manufacturer/importer	Use	Chemical
T-11-0007	03/24/11	05/07/11	Cytec Industries Inc	(G) Coating resin	(G) Heteromonocycle, polymer with substituted carbomonocycle and alkylene glycol, alkyl acrylate blocked.
T-11-0008	03/25/11	05/08/11	Cytec Industries Inc	(G) Coating resin	(G) Epoxy modified alkyd resin, partially neutralized.

In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.

Table III—122 NOCs Received From February 1, 2011 to April 22, 2011

Case No.	Received date	Commencement notice end date	Chemical
P-00-0141	02/03/11	01/23/11	(S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium salt.
P-00-0142	02/03/11	01/23/11	(S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium sodium salt.
P-00-0145	02/03/11	01/23/11	(S) L-aspartic acid, N,N′-1,2-ethanediylbis-, magnesium sodium salt (1:1:1).
P-01-0932	03/08/11	03/04/11	(G) Aliphatic epoxide.
P-02-0249	04/04/11	03/23/11	(S) Fatty acids, C16-18 and C18-unsatd., me esters, epoxidized.
P-04-0479	04/19/11	04/04/11	(G) Mixture containing alcohols, aminoalcohols and their sodium salts.
P-04-0575	04/01/11	02/23/11	(G) Alkoxyated dihalogenated aromatic heterocycle.
P-04-0670	04/01/11	03/15/11	(G) Poly(alkoxy aromatic heterocycle).
P-05-0267	02/14/11	01/31/11	(G) Polydimethyl fluoroalkyl hydrogen siloxane.
P-06-0255	04/06/11	03/14/11	(S) Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with 1,4-cyclohexanedicarboxylic acid, polyethylene-polypropylene glycol bis(2-aminopropyl) ether, polypropylene glycol diamine and propionic acid.
P-06-0394	03/31/11	03/03/11	(G) Epoxy acrylate oligomer.
P-06-0702	02/01/11	01/28/11	(G) Substituted aliphatic amine.
P-07-0010	04/04/11	03/25/11	(G) Styrene-maleic anhydride copolymer, reaction products with polyether, salt with alkanolamin.
P-07-0090	03/31/11	03/03/11	(G) Aliphatic urethane acrylate oligomer.
P-07-0257	02/15/11	02/07/11	(G) Aqueous, aliphatic polyether polyurethane dispersion polymer.
P-07-0407	02/10/11	01/29/11	(G) Fatty acid polymer with aliphatic diol and aromatic diacid.
P-07-0601	02/17/11	01/27/11	(G) Hydrofluoroolefin.
P-08-0080	03/14/11	11/18/10	(G) Amine salt of polyester polyol, cycloaliphatic glycol, hydroxy substituted carboxylic acid, alkyldiamine and aliphatic diisocyanate.
P-08-0524	03/31/11	03/03/11	(G) Unsaturated polyester.
P-08-0545	03/11/11	03/02/11	(G) Surface-active, blocked isocyanate polymer.
P-08-0558	03/31/11	03/03/11	(G) Polyurethane acrylate.
P-08-0664	02/14/11	02/04/11	(G) Fluorinated acrylic copolymer.
P-09-0029	03/31/11	03/03/11	(G) Polyester acrylate.
P-09-0162	03/08/11	02/24/11	(G) Styrenic polymers.
P-09-0175	03/04/11	02/27/11	(G) Aqueous polyurethane resin dispersion.
P-09-0209	03/01/11	02/14/11	(S) Poly(oxy-1,2-ethanediyl), .alpha.-undecyl-.omega.-hydroxy-, branched and linear, ethers with 1,2-decanediol (1:1).
P-09-0258	03/31/11	03/03/11	(G) Bis-phenoxyethanol fluorene diacrylate.
P-09-0359	03/31/11	03/03/11	(G) Methylene bis-(4-cyclohexylisocyanate), oligomeric reaction products with polyester polyol and hydroxyethyl acrylate and 2,2-bis(hydroxymethyl) propionic acid, compound with amine.
P-09-0360	03/31/11	03/03/11	(G) Methylene bis-(4-cyclohexylisocyanate), oligomeric reaction products with polyester polyol and hydroxyethyl acrylate and 2,2-bis(hydroxymethyl) propionic acid.
P-09-0391	02/01/11	01/10/11	(G) Polyamide epichlorohydrin resin salt (PMN substances A-F).
P-09-0403	03/31/11	03/03/11	(G) Alkyd resin.
P-09-0505	02/18/11	02/16/11	(G) Aliphatic urethane acrylate.
P-09-0533	03/08/11	02/28/11	(S) Siloxanes and silicones, me hydrogen, me 3-(2-oxiranylmethoxy)propyl, ethoxy- and methoxy-terminated.
P-09-0568	03/22/11	03/14/11	(G) Formaldehyde, polymer with 2-(chloromethyl)oxirane, polyoxyalkane, and phenols.
P-10-0079	04/19/11	04/14/11	(G) Substituted naphthalene mixed salt.
P-10-0179	04/19/11	04/13/11	(G) Polymer of tall oil fatty acid, aliphatic diols, aliphatic polyols, and aromatic acids.
P-10-0232	02/22/11	02/09/11	(G) Polycarboxylic acid/polysulfonate derivative.
P-10-0269	03/01/11	02/07/11	(G) Polymer of aromatic dicarboxylic acid and alkane diamine.
P-10-0282	01/31/11	01/12/11	(G) Maleated nylon graft copolymer.
P-10-0326	02/22/11	01/26/11	(S) Propane, 1,1,1,2,3,3-hexafluoro-.
P-10-0327	03/04/11	02/08/11	(S) 1-propene, 1,2,3,3,3-pentafluoro-.
P-10-0338	02/22/11	02/10/11	(G) Acrylate copolymer.
P-10-0339	02/22/11	01/31/11	(G) Acrylate copolymer.
P-10-0342	04/07/11	03/07/11	(G) Poly 2-ethylhexyl methacrylate.
P-10-0343	02/09/11	01/15/11	(G) Substituted cyclomethacrylate.
P-10-0358	02/18/11	02/14/11	(G) Polycyclic polyamine diester organometallic compound.
P-10-0374	02/08/11	02/01/11	(G) Modified polyalkylene polyamine reacted with bisphenol a diglycidyl ether 1 and modified epoxy resin.
P-10-0399	02/24/11	02/21/11	(G) Styrene-maleinate copolymer.
P-10-0406	03/10/11	03/08/11	(G) Alkene acrylate copolymer.
P-10-0423	02/01/11	01/24/11	(S) Benzenesulfonic acid 3,3′-[(9,10-dihydro-5,8-dihydroxy-9,10-dioxo-1,4-anthracenediyl)dimino]bis[6-butyl-], disodium salt.
P-10-0435	04/07/11	03/24/11	(G) Substituted anthraquionone derivative.
P-10-0454	02/22/11	01/26/11	(S) 1,3-divinyl imidazolidin-2-one.
P-10-0455	02/15/11	02/10/11	(G) Hexahalosubstituted alkane.
P-10-0456	03/28/11	03/14/11	(G) Alkenes, polymer with anhydride esters.
P-10-0457	02/15/11	01/26/11	(G) Pentahalosubstituted alkane.
P-10-0460	03/18/11	03/02/11	(G) Fatty acids, reaction product with adipic and trifunctional alcohol.
P-10-0489	02/15/11	02/14/11	(G) Pentahalosubstituted alkene.
P-10-0496	03/21/11	02/27/11	(G) Poly acrylate.
P-10-0501	02/09/11	01/17/11	(G) Substituted pyridone.
P-10-0517	02/17/11	02/15/11	(S) Oxirane, 2-ethyl-, polymer with oxirane, mono-C12-14-sec-alkyl ethers.
P-10-0536	04/01/11	03/26/11	(G) Styrene-maleic anhydride copolymer, reaction product with amino compounds.
P-10-0546	02/15/11	01/15/11	(G) Modified lithium iron phosphate.
P-10-0547	03/30/11	01/29/11	(G) Vegetable oil, modified products.
P-10-0548	03/30/11	02/15/11	(G) Vegetable oil, modified products.
P-10-0549	03/30/11	02/14/11	(G) Vegetable oil, modified products.
P-10-0557	04/01/11	03/26/11	(G) Aromatic polyester.
P-10-0562	03/23/11	03/16/11	(G) Alkyl methacrylates, polymer with alkyl acrylates, styrene, hydroxyalkyl methacrylates, epoxypropyl acrylates and polyalkene glycol hydrogen sulfate, alkyloxyalkyl alkenyloxy alkyl, ammonium salt.
P-10-0570	04/01/11	03/26/11	(G) Polyester.
P-10-0576	04/19/11	04/09/11	(G) Alkyloxypropyliminodipropionic acid, monosodium salt.
P-10-0577	03/18/11	02/24/11	(G) Polyamideimide.
P-10-0578	03/23/11	03/16/11	(G) Alkylenealkanedioic acid, polymer with alkenylbenzene and alkenenitrile, ammonium salt, alkylhydroperoxide-initiated.
P-10-0580	03/11/11	02/28/11	(G) Hetromonocyclic[3,4-b]thiophene, homopolymer, 2-[1-[difluoro[(1,2,2-trifluoroethenyl)oxy]methyl]-1,2,2,2-tetrafluoroethoxy]-1,1,2,2-tetrafluoroethyoxy]-1,1,2,2-tetrafluoroethanesulfonic acid-tetrafluoroethylene polymer-doped.
P-10-0582	03/08/11	02/03/11	(G) Isocyanate terminated urethane polymer.
P-10-0583	03/08/11	02/24/11	(G) Isocyanate terminated urethane polymer.
P-10-0584	03/08/11	02/02/11	(G) Isocyanate terminated urethane polymer.
P-10-0585	03/08/11	02/17/11	(G) Isocyanate terminated urethane polymer.
P-10-0586	01/31/11	01/05/11	(G) Isocyanate terminated urethane polymer.
P-10-0587	01/31/11	01/06/11	(G) Isocyanate terminated urethane polymer.
P-10-0589	02/22/11	01/31/11	(G) Dibasic acid ester.
P-10-0593	02/04/11	01/10/11	(G) Modified starch.
P-11-0001	02/17/11	02/09/11	(G) Aromatic polyisocyanate, aliphatic polyol blocked.
P-11-0010	02/04/11	01/05/11	(G) Fatty acid modified polyester aliphatic polyurethane dispersion.
P-11-0011	02/09/11	02/04/11	(G) Polyol blocked cycloaliphatic amine polymer.
P-11-0013	02/11/11	02/09/11	(G) Alkyl dioic acid, polymer with substituted alkanoate, alkyl diisocyanate, alkyldiol, and substituted alkanoic acid.
P-11-0017	03/07/11	02/18/11	(G) Aromatic diacid, polymer with polyol, alkyl triol, alkyl alkanoate.
P-11-0019	04/07/11	03/28/11	(G) Mercapto silane ester of silica.
P-11-0023	04/07/11	03/29/11	(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,2-trifluoroethoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1).
P-11-0024	04/11/11	03/18/11	(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,3,3,3-pentafluoropropoxy)methyl]oxtane, ether with 2,2-dimethyl-1,3-propanediol (2:1).
P-11-0029	03/28/11	03/25/11	(S) Cyclopentene, 1,3,3,4,4,5,5-heptafluoro-.
P-11-0030	02/23/11	02/11/11	(G) Waterborne polyurethane.
P-11-0041	02/22/11	02/11/11	(S) Oxirane, 2-ethyl-, polymer with 2-methyloxirane, monododecyl ether.
P-11-0051	04/05/11	03/09/11	(G) Amino methacrylate copolymer.
P-11-0054	03/23/11	02/28/11	(S) 2H-pyran-4-ol, 2-(1-ethylpropyl) tetrahydro-4-methyl.
P-11-0056	03/31/11	03/03/11	(G) Aliphatic urethane acrylate polymer.
P-11-0057	03/31/11	03/03/11	(G) Aliphatic urethane acrylate polymer.
P-11-0061	03/04/11	02/23/11	(G) Reaction product of substituted naphthalenesulfonic acid diazotized and couple with substituted triazine and substituted naphthalenesulfonic acid alkyl amino phenyl compound.
P-11-0062	04/19/11	04/07/11	(G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidene alkenoate and dialkylaminoalkyl alkenamide.
P-11-0065	02/24/11	02/16/11	(G) Alkyl methacrylate.
P-11-0068	03/28/11	03/09/11	(G) Polyester polyamide.
P-11-0070	03/10/11	03/09/11	(S) Siloxanes and silicones, me hydrogen, me vinyl.
P-11-0071	03/10/11	02/23/11	(S) Siloxanes and silicones, di-ph, me hydrogen, me vinyl.
P-11-0073	02/15/11	02/10/11	(G) Alkylxylene.
P-11-0083	04/01/11	03/28/11	(G) Reaction product of substituted naphthalenesulfonic acid and substituted benzenesulfonic acid diazotized and coupled with alkyl benzene substituted triazine amino phenyl compound.
P-11-0094	04/05/11	03/13/11	(G) 2-naphthalenecarboxylic acid, substituted diazenyl calcium salt.
P-11-0095	03/23/11	03/21/11	(S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol, 1,3,5,7,9,11,14-heptaphenyl.
P-11-0096	03/22/11	03/15/11	(S) 1,4-benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,4-cyclohexanedimethanol and 2,2,4,4-tetramethyl-1,3-cyclobutanediol, manufacture of, by-products from, reaction products with ethylene glycol, polymers with 1,4-cyclohexanedimethanol, diethylene glycol, ethylene glycol, maleic anhydride and phthalic anhydride, 3a,4,5,6,7,7a-hexahydro-4,7-methano-1h-inden-5(or 6)-yl esters.
P-11-0099	04/01/11	03/24/11	(G) Condensation sodium/potassium salt reaction product of substituted naphthalene sulfonic acid azo substituted phenyl amino substituted triazine and alkylsulfonyl benzenesulfonic acid azo substituted phenylamino substituted triazine.
P-11-0110	04/19/11	03/25/11	(G) Tertiary ammonium compound.
P-11-0112	04/20/11	04/13/11	(G) Modified epoxy resin.
P-11-0113	04/12/11	03/28/11	(G) Heteromonocyclo, 4-methyl-, oxide, methanesulfonate salt.
P-11-0115	03/28/11	03/17/11	(G) Mdi modified polyester resin.
P-11-0126	04/16/11	04/13/11	(S) 1,3-benzenedicarboxylic acid, polymers with by-products from manuf. of 1,4-cyclohexanedimethanol-di-me terephthalate-2,2,4,4-tetramethyl-1,3-cyclobutanediol polymer-ethylene glycol reaction products, 1,4-cyclohexanedimethanol, diethylene glycol, ethylene glycol, maleic anhyride and triethylene glycol.
P-11-0127	04/12/11	03/16/11	(G) Epoxidized fatty acids, unsaturated, me esters, polymers with trimethylolpropane.
P-11-0134	04/19/11	04/08/11	(G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidiene alkenoate and heteromonocyclic alkene.
P-11-0143	04/08/11	04/04/11	(G) Acrylic polymer.
P-11-0155	03/21/11	03/18/11	(G) Polymer substituted anthraquinone derivative.
P-98-0317	04/08/11	03/01/11	(G) Substituted cyclic olefin.
P-11-0127	04/12/11	03/16/11	(G) Epoxidized fatty acids, unsaturated, me esters, polymers with trimethylolpropane.
P-11-0134	04/19/11	04/08/11	(G) Carbomonocyclic alkene polymer with alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, alkyl alkenoate, polyalkylidiene alkenoate and heteromonocyclic alkene.
P-11-0143	04/08/11	04/04/11	(G) Acrylic polymer.
P-11-0155	03/21/11	03/18/11	(G) Polymer substituted anthraquinone derivative.
P-98-0317	04/08/11	03/01/11	(G) Substituted cyclic olefin.

If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

List of Subjects

• Environmental protection
• Chemicals
• Hazardous substances
• Imports
• Notice of commencement
• Premanufacturer,

Dated: June 8, 2011.

Chandler Sirmons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.