2018-13429. Certain Plastic Decorative Ribbon From the People's Republic of China: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination With Final Antidumping Duty Determination

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain plastic decorative ribbon from the People's Republic of China (China). The period of investigation is January 1, 2016, through December 31, 2016.

DATES:

Applicable June 22, 2018.

FOR FURTHER INFORMATION CONTACT:

Maliha Khan or Nancy Decker, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone] or 202-482-0196, respectively.

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 703(b) of the Tariff Act of 1930, as amended (the Act). Commerce published the notice of initiation of this investigation on January 23, 2018.^[1] Commerce exercised its discretion to toll all deadlines affected by the closure of the Federal Government from January 20 through January 22, 2018.^[2] On March 12, 2018, Commerce postponed the deadline for the preliminary determination of the investigation to the full 130 days permitted under section 703(c)(1)(A) of the Act and 19 CFR 351.205(b)(2), and the revised deadline is now May 29, 2018.^[3]

For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.^[4] A list of topics discussed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov,, and is available to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​. The signed and electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Investigation

The products covered by this investigation are certain plastic decorative ribbon from China. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations,^[5] the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage (i.e., scope).^[6] Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. Commerce is currently evaluating the scope comments filed by the interested parties. Commerce intends to issue its preliminary decision regarding the scope of the AD and CVD investigations in the preliminary determination of the companion AD investigation, which is currently due no later than July 30, 2018, unless postponed. The preliminary scope decision will be placed on the record of both the AD and CVD investigations, and interested parties will have the opportunity to comment prior to the final CVD determination.

Methodology

Commerce is conducting this investigation in accordance with section 701 of the Act. For each of the subsidy programs found countervailable, Commerce preliminarily determines that there is a subsidy, i.e., a financial contribution by an “authority” that confers a benefit on the recipient, and that the subsidy is specific.^[7] For a full description of the methodology underlying our preliminary conclusions, see the Preliminary Decision Memorandum.

In making these findings, we relied, in part, on facts available and, because one or more respondents did not act to the best of their ability to respond to our requests for information, we drew an adverse inference where appropriate in selecting from among the facts otherwise available.^[8] For further information, see “Use of Facts Otherwise Available and Adverse Inferences” in the Preliminary Decision Memorandum.

Preliminary Determination and Suspension of Liquidation

In accordance with section 703(d)(1)(A) of the Act, Commerce established rates for Joynice Gifts & Crafts Co., Ltd. (Joynice) and Seng San Enterprises Co., Ltd. (Seng Sen) (the two individually investigated exporters/producers of the subject merchandise that participated in this investigation), and for Santa's Collection Shaoxing Co., Ltd. (which is assigned a rate based on AFA) as well as an all-others rate.

In accordance with sections 703(d)(1)(A) and 705(c)(5)(A) of the Act, for companies not individually investigated, Commerce applies an “all-others” rate. The all-others rate is normally calculated by weight averaging the subsidy rates of the companies selected for individual examination with those companies' export sales of the subject merchandise to the United States, excluding any zero and de minimis rates calculated for the exporters and producers individually investigated, and any rates determined entirely under section 776 of the Act.

In this investigation, Commerce calculated individual countervailable subsidy rates for Joynice and Seng Sen that are not zero, de minimis, or based entirely on facts otherwise available. Because we do not have publicly ranged data from all company respondents with which to calculate the all-others rate using a weighted-average of the individual estimated subsidy rates, we calculated the all-others rate using a simple average of the individual estimated subsidy rates calculated for the examined respondents.

Commerce preliminarily determines that the following estimated countervailable subsidy rates exist:

Producer/exporter	Subsidy rate (percent)
Joynice Gifts & Crafts Co., Ltd	14.27
Seng San Enterprises Co., Ltd	12.81
Santa's Collection Shaoxing Co., Ltd	94.67
All-Others	13.54

In accordance with section 703(d)(1)(B) and (d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise as described in the scope of the investigation that were entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Furthermore, pursuant to 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the rates indicated above.

Disclosure

Commerce intends to disclose its calculations and analysis to interested parties in this preliminary determination within five days of its public announcement, or if there is no public announcement, within five days of the date of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs.^[9] Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal briefs in this investigation are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities. Commerce intends to set a separate briefing schedule pertaining to scope issues when it issues the preliminary scope memorandum in this investigation.

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce within 30 days after the date of publication of this notice. Requests should contain the party's name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Parties are reminded that briefs and hearing requests are to be filed electronically using ACCESS and that electronically filed documents must be received successfully in their entirety by 5 p.m. Eastern Time on the due date.

International Trade Commission Notification

In accordance with section 703(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its determination. If Commerce's final determination is affirmative, the ITC will make its final determination before the later of 120 days after the date of this preliminary determination or 45 days after Commerce's final determination.

Notification to Interested Parties

This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act and 19 CFR 351.205(c).

Dated: May 29, 2018.

Gary Taverman,

Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

The merchandise covered by this investigation is certain plastic decorative ribbon having a width (measured at the narrowest span of the ribbon) of less than or equal to four (4) inches in actual measurement, including but not limited to ribbon wound onto itself; a spool, a core or a tube (with or without flanges); attached to a card or strip; wound into a keg- or egg-shaped configuration; made into bows, bow-like items, or other shapes or configurations; and whether or not packaged or labeled for retail sale. The subject merchandise is typically made of substrates of polypropylene, but may be made in whole or in part of any type of plastic, including without limitation, plastic derived from petroleum products and plastic derived from cellulose products. Unless the context otherwise clearly indicates, the word “ribbon” used in the singular includes the plural and the plural “ribbons” includes the singular.

The subject merchandise includes ribbons comprised of one or more layers of substrates made, in whole or in part, of plastics adhered to each other, regardless of the method used to adhere the layers together, including without limitation, ribbons comprised of layers of substrates adhered to each other through a lamination process. Subject merchandise also includes ribbons comprised of (a) one or more layers of substrates made, in whole or in part, of plastics adhered to (b) one or more layers of substrates made, in whole or in part, of non-plastic materials, including, without limitation, substrates made, in whole or in part, of fabric.

The ribbons subject to this investigation may be of any color or combination of colors (including without limitation, ribbons that are transparent, translucent or opaque) and may or may not bear words or images, including without limitation, those of a holiday motif. The subject merchandise includes ribbons with embellishments and/or treatments, including, without limitation, ribbons that are printed, hot-stamped, coated, laminated, flocked, crimped, die-cut, embossed (or that otherwise have impressed designs, images, words or patterns), and ribbons with holographic, metallic, glitter or iridescent finishes.

Subject merchandise includes “pull-bows” an assemblage of ribbons connected to one another, folded flat, and equipped with a means to form such ribbons into the shape of a bow by pulling on a length of material affixed to such assemblage, and “pre-notched” bows, an assemblage of notched ribbon loops arranged one inside the other with the notches in alignment and affixed to each other where notched, and which the end user forms into a bow by separating and spreading the loops circularly around the notches, which form the center of the bow. Subject merchandise includes ribbons that are packaged with non-subject merchandise, including ensembles that include ribbons and other products, such as gift wrap, gift bags, gift tags and/or other gift packaging products. The ribbons are covered by the scope of this investigation; the “other products” (i.e., the other, non-subject merchandise included in the ensemble) are not covered by the scope of this investigation.

Excluded from the scope of this investigation are the following: (1) Ribbons formed exclusively by weaving plastic threads together; (2) ribbons that have metal wire in, on, or along the entirety of each of the longitudinal edges of the ribbon; (3) ribbons with an adhesive coating covering the entire span between the longitudinal edges of the ribbon for the entire length of the ribbon; (4) ribbon formed into a bow without a tab or other means for attaching the bow to an object using adhesives, where the bow has: (a) An outer layer that is either flocked or made of fabric, and (b) a flexible metal wire at the base that is suitable for attaching the bow to a Christmas tree or other object by twist-tying; (5) elastic ribbons, meaning ribbons that elongate when stretched and return to their original dimension when the stretching load is removed; (6) ribbons affixed as a decorative detail to non-subject merchandise, such as a gift bag, gift box, gift tin, greeting card or plush toy, or affixed (including by tying) as a decorative detail to packaging containing non-subject merchandise; (7) ribbons that are (a) affixed to non-subject merchandise as a working component of such non-subject merchandise, such as where the ribbon comprises a book marker, bag cinch, or part of an identity card holder, or (b) affixed (including by tying) to non-subject merchandise as a working component that holds or packages such non-subject merchandise or attaches packaging or labeling to such non-subject merchandise, such as a “belly band” around a pair of pajamas, a pair of socks or a blanket; (8) imitation raffia made of plastics having a thickness not more than one (1) mil when measured in an unfolded/untwisted state; and (9) ribbons in the form of bows having a diameter of less than seven-eighths (7/8) of an inch, or having a diameter of more than 16 inches, based on actual measurement. For purposes of this exclusion, the diameter of a bow is equal to the diameter of the smallest circular ring through which the bow will pass without compressing the bow.

Further, excluded from the scope of the antidumping duty investigation are any products covered by the existing antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET Film) from the People's Republic of China (China). See Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, the People's Republic of China and the United Arab Emirates: Antidumping Duty Orders and Amended Final Determination of Sales at Less Than Fair Value for the United Arab Emirates, 73 FR 66595 (November 10, 2008).

Merchandise covered by this investigation is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 3920.20.0015 and 3926.40.0010.

Merchandise covered by this investigation also may enter under subheadings 3920.10.0000; 3920.20.0055; 3920.30.0000; 3920.43.5000; 3920.49.0000; 3920.62.0050; 3920.62.0090; 3920.69.0000; 3921.90.1100; 3921.90.1500; 3921.90.1910; 3921.90.1950; 3921.90.4010; 3921.90.4090; 3926.90.9996; 5404.90.0000; 9505.90.4000; 4601.99.9000; 4602.90.0000; 5609.00.3000; 5609.00.4000; and 6307.90.9889. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Scope Comments

IV. Scope of the Investigation

V. Respondent Selection

VI. Injury Test

VII. Application of the CVD Law to Imports From China

VIII. Diversification of China's Economy

IX. Subsidies Valuation

X. Benchmarks

XI. Use of Facts Otherwise Available and Adverse Inferences

XII. Analysis of Programs

XIII. Calculation of the All-Others Rate

XIV. ITC Notification

XV. Disclosure and Public Comment

XVI. Verification

XVII. Recommendation

Footnotes

1.  See Certain Plastic Decorative Ribbon from the People's Republic of China: Initiation of Countervailing Duty Investigation, 83 FR 3114 (January 23, 2018) (Initiation Notice).

2.  See Memorandum, “Deadlines Affected by the Shutdown of the Federal Government,” dated January 23, 2018. All deadlines in this segment of the proceeding have been extended by three days.

3.  See Certain Plastic Decorative Ribbon from the People's Republic of China: Postponement of Preliminary Determination in the Countervailing Duty Investigation, 83 FR 10677 (March 12, 2018).

4.  See Memorandum, “Decision Memorandum for the Preliminary Determination in the Countervailing Duty Investigation of Certain Plastic Decorative Ribbon from the People's Republic of China,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

5.  See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997).

6.  See Initiation Notice.

7.  See sections 771(5)(B) and (D) of the Act regarding financial contribution; section 771(5)(E) of the Act regarding benefit; and section 771(5A) of the Act regarding specificity.

8.  See sections 776(a) and (b) of the Act.

9.  See 19 CFR 351.309; see also 19 CFR 351.303 (for general filing requirements).