[Federal Register Volume 63, Number 121 (Wednesday, June 24, 1998)]
[Notices]
[Pages 34399-34402]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-16774]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPTS-51905; FRL-5793-8]
Certain Chemicals; Premanufacture Notices
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture or import a new chemical to
notify EPA and comply with the statutory provisions pertaining to the
manufacture or import of substances not on the TSCA Inventory. Section
5 of TSCA also requires EPA to publish receipt and status information
in the Federal Register each month reporting premanufacture notices
(PMN) and test marketing exemption (TME) application requests received,
both pending and expired. The information in this document contains
notices received from April 13, 1998 to April 17, 1998.
ADDRESSES: Written comments, identified by the document control number
``[OPPTS-51905]'' and the specific PMN number, if appropriate, should
be sent to: Document Control Office (7407), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 401 M St., SW.,
Rm. ETG-099 Washington, DC 20460.
Comments and data may also be submitted electronically by sending
electronic mail (e-mail) to: oppt.ncic@epamail.epa.gov. Electronic
comments must be submitted as an ASCII file avoiding the use of special
characters and any form of encryption. Comments and data will also be
accepted on disks in WordPerfect in 5.1/6.1 file format or ASCII file
format. All comments and data in electronic form must be identified by
the docket number [OPPTS-51905]. No Confidential Business Information
(CBI) should be submitted through e-mail. Electronic comments on this
notice may be filed online at many Federal Depository Libraries.
Additional information on electronic submissions can be found under
``SUPPLEMENTARY INFORMATION''.
All comments which contain information claimed as CBI must be
clearly marked as such. Three sanitized copies of any comments
containing information claimed as CBI must also be submitted and will
be placed in the public record for this notice. Persons submitting
information on any portion of which they believe is entitled to
treatment as CBI by EPA must assert a business confidentiality claim in
accordance with 40 CFR 2.203(b) for each such portion. This claim must
be made at the time that the information is submitted to EPA. If a
submitter does not assert a confidentiality claim at the time of
submission, EPA will consider this as a waiver of any confidentiality
claim and the information may be made available to the public by EPA
without further notice to the submitter.
FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director,
Environmental Assistance Division (7408), Office of Pollution
Prevention
[[Page 34400]]
and Toxics, Environmental Protection Agency, Rm. E-531, 401 M St., SW.,
Washington, DC, 20460, (202) 554-1404, TDD (202) 554-0551; e-mail:
TSCA-Hotline@epamail.epa.gov.
SUPPLEMENTARY INFORMATION: Under the provisions of TSCA, EPA is
required to publish notice of receipt and status reports of chemicals
subject to section 5 reporting requirements. The notice requirements
are provided in TSCA sections 5(d)(2) and 5(d)(3). Specifically, EPA is
required to provide notice of receipt of PMNs and TME application
requests received. EPA also is required to identify those chemical
submissions for which data has been received, the uses or intended uses
of such chemicals, and the nature of any test data which may have been
developed. Lastly, EPA is required to provide periodic status reports
of all chemical substances undergoing review and receipt of notices of
commencement.
A record has been established for this notice under docket number
``[OPPTS-51905]'' (including comments and data submitted electronically
as described below). A public version of this record, including
printed, paper versions of electronic comments, which does not include
any information claimed as CBI, is available for inspection from 12
noon to 4 p.m., Monday through Friday, excluding legal holidays. The
public record is located in the TSCA Nonconfidential Information Center
(NCIC), Rm. NEM-B607, 401 M St., SW., Washington, DC 20460.
Electronic comments can be sent directly to EPA at:
oppt.ncic@epamail.epa.gov
Electronic comments must be submitted as an ASCII file avoiding the
use of special characters and any form of encryption.
The official record for this notice, as well as the public version,
as described above will be kept in paper form. Accordingly, EPA will
transfer all comments received electronically into printed, paper form
as they are received and will place the paper copies in the official
record which will also include all comments submitted directly in
writing. The official record is the paper record maintained at the
address in ``ADDRESSES'' at the beginning of this document.
In the past, EPA has published individual notices reflecting the
status of section 5 filings received, pending or expired, as well as
notices reflecting receipt of notices of commencement. In an effort to
become more responsive to the regulated community, the users of this
information and the general public, to comply with the requirements of
TSCA, to conserve EPA resources, and to streamline the process and make
it more timely, EPA is consolidating these separate notices into one
comprehensive notice that will be issued at regular intervals.
In this notice, EPA shall provide a consolidated report in the
Federal Register reflecting the dates PMN requests were received, the
projected notice end date, the manufacturer or importer identity, to
the extent that such information is not claimed as confidential and
chemical identity, either specific or generic depending on whether
chemical identity has been claimed confidential. Additionally, in this
same report, EPA shall provide a listing of receipt of new notices of
commencement.
EPA believes the new format of the notice will be easier to
understand by the interested public, and provides the information that
is of greatest interest to the public users. Certain information
provided in the earlier notices will not be provided under the new
format. The status reports of substances under review, potential
production volume, and summaries of health and safety data will not be
provided in the new notices.
EPA is not providing production volume information in the
consolidated notice since such information is generally claimed as
confidential. For this reason, there is no substantive loss to the
public in not publishing the data. Health and safety data are not
summarized in the notice since it is recognized as impossible, given
the format of this notice, as well as the previous style of notices, to
provide meaningful information on the subject. In those submissions
where health and safety data were received by the Agency, a footnote is
included by the Manufacturer/Importer identity to indicate its
existence. As stated below, interested persons may contact EPA directly
to secure information on such studies.
For persons who are interested in data not included in this notice,
access can be secured at EPA Headquarters in the NCIC at the address
provided above. Additionally, interested parties may telephone the
Document Control Office at (202) 260-1532, TDD (202) 554-0551, for
generic use information, health and safety data not claimed as
confidential or status reports on section 5 filings.
Send all comments to the address listed above. All comments
received will be reviewed and appropriate amendments will be made as
deemed necessary.
This notice will identify: (I) PMNs received; and (II) Notices of
Commencement to manufacture/import.
I. 29 Premanufacture Notices Received From: 04/13/98 to 04/17/98
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End Manufacturer/
Case No. Received Date Date Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-98-0682 04/14/98 07/13/98 Bedoukian Research, (S) Chemical (G) Unsaturated alkyl
Inc. intermediate for use grignard reagent
in a pheromone
synthesis. epa
registration no:
52991-CT-7; chemical
intermediate used in
fragrance
manufacture (FFDCA);
chemical
intermediate used in
flavor manufacture
(FFDCA); chemical
intermediate.
fragrance use
(soaps, detergents,
air fresheners,
scented papers)
P-98-0683 04/13/98 07/12/98 CBI (G) Open, non- (G) Polyester resin
dispersive
P-98-0684 04/14/98 07/13/98 CBI (G) Coating component (G) Polymer of
substituted
carbomonocyclic
diisocyanate,
substituted
alkanediols, 4,4
isopropylidenedi[cycloh
exanol], polyalkyl
amine, and
alkylenediamine
P-98-0685 04/13/98 07/12/98 Wacker Silicones (S) Release agent for (G) Siloxanes and
Corporation aluminum die casting silicones, alkyl
arylalkyl
[[Page 34401]]
P-98-0686 04/13/98 07/12/98 CBI (G) Fuel additive (G) Nitrobenzoic acid,
intermediate polyolefin phenol
ethoxylate
P-98-0687 04/13/98 07/12/98 CBI (G) Fuel additive (G) Polyolefin phenol
intermediate ethoxylate
P-98-0688 04/13/98 07/12/98 CBI (G) Fuel additive (G) Aminobenzoic acid,
intermediate polyolefin phenol
ethoxylate
P-98-0689 04/14/98 07/13/98 CBI (G) Additives for (G) Acrylic resin
coating
P-98-0690 04/14/98 07/13/98 NA Industries, Inc. (S) A binder resin (G) 2-propenoic acid, 2-
for plastic coating methyl-, polymers with
2-hydroxypropyl
acrylate, ethenyl
benzen, alkyl 2-methyl-
2-propenoate, alkyl 2-
propenoate and
chlorinated
polypropylene
P-98-0691 04/14/98 07/13/98 NA Industries, Inc. (S) A binder resin (G) 2-propenoic acid, 2-
for industrial methyl-, 2-hydroxyethyl
coating ester, polymer with
alkyl 2-methyl-2-
propenoate and alkyl 2-
propenoate
P-98-0692 04/14/98 07/13/98 NA Industries, Inc. (S) A binder resin (G) 2-propenoic acid, 2-
for plastic coating methyl-, 2-hydroxyethyl
ester, polymer with
alkyl 2-methyl-2-
propenoate and alkyl 2-
propenoate
P-98-0693 04/14/98 07/13/98 Vianova Resins (G) Binder for paints (G) Modified
carboxyfunctional
polyurethane
P-98-0694 04/15/98 07/14/98 Ashland Chemical (G) Additive in (G) Modified isocyanic
Company foundry binders acid,
polymethylenepolyphenyl
ene ester
P-98-0695 04/16/98 07/15/98 CBI (G) Open, non- (G) Hydroxy functional
dispersant use oligomer
P-98-0696 04/16/98 07/15/98 CBI (G) Additive, open, (G) Polyoxyalkylene
non-dispersive use polyester urethane
block copolymer
P-98-0697 04/16/98 07/15/98 CBI (G) Additive, open, (G) Polyoxyalkylene
non-dispersive use polyester urethane
block copolymer
P-98-0698 04/16/98 07/15/98 CBI (G) Additive, open, (G) Polyoxyalkylene
non-dispersive use polyester urethane
block copolymer
P-98-0699 04/16/98 07/15/98 CBI (G) Open, non- (G) Amino functional
dispersive use polyamide
P-98-0700 04/15/98 07/14/98 CBI (G) Stabilizers for (G) Mixed alkylmetallic
plastics mercaptoester sulfides
P-98-0701 04/15/98 07/14/98 CBI (G) Stabilizers for (G) Mixed alkylmetallic
plastics mercaptoester sulfides
P-98-0702 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0703 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0704 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0705 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0706 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0707 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
P-98-0708 04/16/98 07/15/98 Elementis Performance (S) Curing agent for (G) Modified acid
Polymers, Division epoxy adhesive; anhydride
of Harcos Chemicals curing agent for
electrical epoxy
potting/
encapsulation of
electrical devices
[[Page 34402]]
P-98-0709 04/17/98 07/16/98 Bedoukian Research, (S) Chemical (G) Alkenyl grignard
Inc. intermediate for use reagent
in a pheromone
synthesis. epa
registration no.
52991-CT-8; chemical
intermediate for use
in pheromone
synthesis used for
monitoring traps 40
CFR 152.10(b), (not
a pesticide);
chemical
intermediate for use
in synthesis of
agricultural
pheromone for use as
sole active
ingredient in traps
to achieve pest
control. 40 CFR
152.25(b)(4)
P-98-0711 04/16/98 07/15/98 CBI (G) Ink component (G) Isophthalic acid
polymer with
polyhydroxycycloalkane,
aromatic acid
anhydride,
polyhydroxyalkanoic
acid, aromatic
anhydride, diethylene
glycol, and
alkanolamine and amine
salts
--------------------------------------------------------------------------------------------------------------------------------------------------------
II. 8 Notices of Commencement Received From: 04/13/98 to 04/17/98
----------------------------------------------------------------------------------------------------------------
Commencement/Import
Case No. Received Date Date Chemical
----------------------------------------------------------------------------------------------------------------
P-95-0066 04/14/98 03/31/98 (G) Polyester isocyanate
polymer
P-95-1490 04/13/98 04/01/98 (G) Polyester isocyanate
prepolymer
P-97-0206 04/16/98 04/01/98 (S) Polymer of:poly(oxy-1,2-
ethanediyl), alpha-
(carboxymethyl)-omega-hydroxy-
, C9-11-alkyl ethers; NAOH
P-97-1010 04/13/98 03/17/98 (S) 2-Propenoic acid, 2-methyl-
, polymer with dodecyl 2-
methyl-2-propenoate,
ethenylbenzene, 2-
hydroxyethyl 2-propenoate and
2-oxepanone
P-98-0106 04/13/98 04/02/98 (G) Allyl-polyalkylene oxide,
acetal-capped
P-98-0110 04/16/98 03/25/98 (G) Acrylic resin
P-98-0292 04/14/98 03/31/98 (G) Polyurethane resin
P-98-0298 04/14/98 04/03/98 (G) Oil soluble barium
petroleum sulfonate
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Premanufacture notices.
Dated: June 16, 1998.
Oscar Morales,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 98-16774 Filed 6-23-98; 8:45 am]
BILLING CODE 6560-50-F
