05-12574. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 11, 2005 to June 8, 2005, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket identification (ID) number OPPT-2005-0035 and the specific PMN number or TME number, must be received on or before July 25, 2005.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket ID number OPPT-2005-0035. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is [phone] and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is [phone].

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket/​, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2005-0035. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to [e-mail], Attention: Docket ID Number OPPT-2005-0035 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2005-0035 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 11, 2005 to June 8, 2005, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 47 Premanufacture Notices Received From: 05/11/05 to 06/08/05

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-05-0545	05/12/05	08/09/05	CBI	(G) Manufacture of protective devices	(G) Urethane polymer
P-05-0546	05/12/05	08/09/05	CBI	(G) Open non-dispersive (coating)	(G) Alkyl resin
P-05-0547	05/13/05	08/10/05	Degussa Corporation	(S) Polymer powder for shapes manufactured by compression molding	(G) Aromatic polyimide
P-05-0548	05/13/05	08/10/05	CBI	(G) Plastics additive	(G) Alkyl carboxylate salt
P-05-0549	05/16/05	08/13/05	Forbo Adhesives, LLC	(G) Hot melt polyurethane adhesive	(G) Isocyanate functional polyester polyether urethane polymer
P-05-0550	05/16/05	08/13/05	CBI	(G) Additive of ink material	(G) Acrylic ester copolymer
P-05-0551	05/16/05	08/13/05	CBI	(G) Polymerization emulsifier	(G) Polyalkylene glycol alkyl ether, reaction products with allyl glycidyl ether
P-05-0552	05/17/05	08/14/05	CBI	(G) Machine seals, wheels and rollers	(G) Aromatic polyurethane polymer
P-05-0553	05/17/05	08/14/05	Ethox Chemicals, LLC	(G) Surface coating	(S) Oxirane, methyl-, polymer with oxirane, monoacetate, 2-hexyldecyl ether
P-05-0554	05/18/05	08/15/05	CBI	(G) Dispersants, curing synergysts, adhesives	(G) Polybutadiene imide
P-05-0555	05/18/05	08/15/05	Mitsuya Boeki USA, Inc.	(G) Curing agent	(S) Dodecanedioic acid, dihydrazide
P-05-0556	05/19/05	08/16/05	CBI	(G) Pigment dispersant	(G) Polyurethane derivative
P-05-0557	05/20/05	08/17/05	Gharda Chemicals LTD.	(S) Molding and extrusion; compounding	(G) Polyetherethersulfonesulfone block copolymer
P-05-0558	05/20/05	08/17/05	CBI	(G) Component for the coloration of polyester fiber	(G) Trisubstituted-phenylazo-propenylamino-methoxy-phenyl-acetamide
P-05-0559	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) .beta.-ketoester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, 1,6-hexanediyl di-2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate and 2-phenoxyethyl 2-propenoate, reaction products with alkylamine
P-05-0560	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) .beta.-ketoester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, 1,6-hexanediyl di-2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate and 2-phenoxyethyl 2-propenoate, reaction products with alkanolamine
P-05-0561	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) 2-propenoic acid, 1,6-hexanediyl ester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2- (hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate, .beta.-diketone and 2-phenoxyethyl 2-propenoate, reaction products with alkylamine
P-05-0562	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) 2-propenoic acid, 1,6-hexanediyl ester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2- (hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate, .beta.-diketone and 2-phenoxyethyl 2-propenoate, reaction products with alkanolamine
P-05-0563	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) .beta.-ketoester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, 1,6-hexanediyl di-2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate, .beta.-diketone and 2-phenoxyethyl 2-propenoate, reaction products with alkylamine
P-05-0564	05/23/05	08/20/05	Ashland Inc., Environmental Health and Safety	(G) Adhesive, coating, ink	(G) .beta.-ketoester, polymer with (chloromethyl)oxirane polymer with 4,4′-(1-methylethylidene)bis[phenol] 2-propenoate, 1,6-hexanediyl di-2-propenoate, .alpha.-hydro-.omega.-[(1-oxo-2-propenyl)oxy]poly(oxy-1,2-ethanediyl) ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), oxybis(methyl-2,1-ethanediyl) di-2-propenoate, .beta.-diketone and 2-phenoxyethyl 2-propenoate, reaction products with alkanolamine
P-05-0565	05/23/05	08/20/05	CBI	(G) Lubricant additive	(G) N-alkylated para-amino diphenylamine
P-05-0566	05/23/05	08/20/05	CBI	(G) Open, non-dispersive (resin)	(G) Hexanediol polycarbonate-based polyurethane-polyurea
P-05-0567	05/23/05	08/20/05	CBI	(G) Open, non-dispersive (resin)	(G) Hexanediol polycarbonate-based polyurethane-polyurea
P-05-0568	05/25/05	08/22/05	Firmenich inc.	(S) Isolated intermediate	(S) Acetic acid, chloro-, 1-(3,3-dimethylcyclohexyl)ethyl ester
P-05-0569	05/25/05	08/22/05	3M company	(S) Moisture curing hot melt adhesive	(G) Polyurethane prepolymer
P-05-0570	05/26/05	08/23/05	CBI	(G) Catalyst	(G) Ammonium multi-metal hydroxide oxide compound
P-05-0571	05/26/05	08/23/05	Meadwestvaco Corporation - Specialty Chemicals Division	(S) Acrylic support resin for printing inks	(G) Acrylate, polymer with styrene and methylamino chloride compounds
P-05-0572	05/26/05	08/23/05	CBI	(G) Catalyst	(G) Ammonium multi-metal nitrate oxide compound
P-05-0573	05/31/05	08/28/05	CBI	(G) Industrial Specialty Coating	(S) Poly(oxy-1,4-butanediyl), .alpha.-hydro-.omega.-hydroxy-, polymer with 2,4-diisocyanato-1-methylbenzene and .alpha., .alpha.′-[(1-methylethylidene) di-4,1-phenylene]bis[.omega.-hydroxypoly(oxy-1,2-ethanediyl)], 2-hydroxy-3-phenoxypropylacrylate-blocked
P-05-0574	05/27/05	08/24/05	CBI	(G) Laminating adhesive	(G) Polyurethane polymer
P-05-0575	05/27/05	08/24/05	CBI	(G) Maintenance coating binder	(G) Acrylic polymer
P-05-0576	05/31/05	08/28/05	Hanse Chemie USA, Inc.	(S) Modifier to impact resistance	(S) Silane, trimethoxyphenyl-, hydrolysis products with silica
P-05-0577	05/31/05	08/28/05	Hanse Chemie USA, Inc.	(S) Modifier to impact resistance	(S) Silane, trimethoxypropyl-, hydrolysis products with silica
P-05-0578	06/01/05	08/29/05	The Dow Chemical Company	(S) Polymer used in sealant manufacture	(G) Isocyanate functional poly carbomoyl (polyalkylene oxide)
P-05-0579	06/01/05	08/29/05	CIBA Specialty Chemicals Corporation	(S) Light stabilizer for use in coatings	(G) 2-[4-(4,6-bis-biphenyl]-4-yl-[1,3,5]triazin-2-yl]-3-hydroxy-phenoxy]-, alkyl acid isoaklyl ester
P-05-0580	06/01/05	08/29/05	CBI	(G) Coating resin	(G) Acrylic acid polymer with vinylated benzenes and substituted propanediol trimethacrylate
P-05-0581	06/01/05	08/29/05	CBI	(G) Coating resin	(G) 2-propenoic acid, polymer with substituted propanediol triacrylated
P-05-0582	06/02/05	08/30/05	The Dow Chemical Company	(G) Coating	(G) Aspartic ester
P-05-0583	06/02/05	08/30/05	Cytec Industries Inc.	(G) Polymeric flow and foam control additive for industrial coatings	(G) Acrylic modified polyester
P-05-0584	06/02/05	08/30/05	CBI	(S) Polyurethane coating	(G) Aqueous polyurethane dispersion
P-05-0585	06/03/05	08/31/05	CBI	(S) Solution acrylic resin is used as a component in a protective coating (paint)	(S) 2-propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate, 1,1-dimethylethyl 2-methyl-2-propenoate and 2-hydroxyethyl 2-methyl-2-propenoate, tert-bu peroxide-initiated
P-05-0586	06/03/05	08/31/05	Cytec Surface Specialties Inc.	(S) Wetting agent for industrial coatings	(G) 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester, homopolymer, ester with [3-[(carboxyamino)methyl]-3,5,5-trimethylcyclohexyl]carbamic acid mono[2-(2-butoxyethoxy)ethyl]ester, [3-[(carboxyamino)methyl]-3,5,5-trimethylcyclohexyl]carba mic acid mono[2-(dimethylamino)ethyl] ester and alkyl polyester homopolymer hydrogen(methyl-1,3-phenylene)bis[carbamate]
P-05-0587	06/02/05	08/30/05	CBI	(G) Pulp fiber treatment	(S) Endo-1,4-.beta.-xylanase
P-05-0588	06/06/05	09/03/05	CBI	(G) Consumer use - highly dispersive use as an ingredient in personal care products; industrial use - open non-dispersive use for the manufacture of products containing pmn substance; commercial use - open dispersive use when products used by professionals on clients	(S) Cycloheptadecenone
P-05-0589	06/06/05	09/03/05	CBI	(G) Consumer use - highly dispersive use as an ingredient in personal care products; industrial use - open non-dispersive use for the manufacture of products containing pmn substance; commercial use - open dispersive use when products used by professionals on clients	(S) Cyclohexanol, 4-(3-meythylbutyl)-
P-05-0590	06/06/05	09/03/05	CBI	(G) 1. Odor eliminator additive. 2. Laser system additive, 3. Teat dip additive.	(G) Substituted benzenesulfonamide
P-05-0591	06/08/05	09/05/05	BASF Corporation	(G) Component used in the manufacture of polyurethane parts	(G) Hexanedioic acid, polymer with aliphatic diols and diisocyanate

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 43 Notices of Commencement From: 05/11/05 to 06/08/05

Case No.	Received Date	Commencement Notice End Date	Chemical
P-04-0003	05/25/05	12/01/04	(S) Pichia pastoris strain gs115
P-02-0283	05/19/05	05/03/05	(S) D-glucopyranose, homopolymer, 2-ethylhexyl glycosides
P-02-1002	05/11/05	04/27/05	(S) Benzene, diethenyl-, polymer with ethenylbenzene and ethenylethylbenzene, phosphonomethylated sulfonated
P-02-1017	05/26/05	05/23/05	(G) Cationic polyether
P-03-0548	05/24/05	05/17/05	(G) Ethoylated alkyl alcohol
P-03-0604	05/09/05	04/21/05	(G) Fluorinated methacrylated monomer
P-03-0650	05/24/05	05/17/05	(G) Organosulfate calcium hydroxy complex
P-04-0203	06/06/05	05/16/05	(G) Alkanediols, polymer with carboxylic acid anhydrides, reacted with branched alcohol and carboxylic acid.
P-04-0439	05/18/05	05/06/05	(S) Propanedioic acid, 1-(3,3-dimethylcyclohexyl)ethyl ethyl ester; propanedioic acid, 3,3,7-trimethylcycloheptyl ethyl ester
P-04-0483	06/02/05	05/24/05	(G) Functionalized poly(meth)acrylic acid
P-04-0525	05/11/05	04/18/05	(G) Alkyl modified silicone
P-04-0537	05/31/05	05/17/05	(G) Fluorochemical ester
P-04-0596	06/02/05	05/25/05	(G) Alkoxyphenol
P-04-0627	06/01/05	05/12/05	(G) Unsaturated polyester benzoate
P-04-0730	06/01/05	05/09/05	(S) Terpenes and terpenoids, turpentine-oil, 3-carene fraction, polymers with phenol
P-04-0806	05/24/05	04/29/05	(G) Phosphonic acid, alkyl-, alkyl ester
P-04-0837	05/11/05	04/12/05	(G) Blocked aliphatic polyurethane resin
P-04-0894	06/07/05	05/13/05	(S) Inulin, carboxymethyl ether, sodium salt
P-04-0905	05/25/05	05/12/05	(G) Polymer of vinyl heterocycle
P-04-0939	06/08/05	05/25/05	(G) Polysiloxane, aminoalkyl terminated polymers with urea functionality alkylbenzene
P-04-0957	05/31/05	05/16/05	(S) 2-propenoic acid, 2-methyl-, polymer with butyl 2-propenoate, ethenylbenzene, methyl 2-methyl-2-propenoate and 2-methylpropyl 2-methyl-2-propenoate
P-04-0958	05/31/05	05/16/05	(S) 2-propenoic acid, 2-methyl-, polymer with butyl 2-propenoate, ethenylbenzene, methyl 2-methyl-2-propenoate and 2-methylpropyl 2-methyl-2-propenoate, ammonium salt
P-05-0011	05/27/05	05/17/05	(S) Phosphinic acid, diethyl-, zinc salt
P-05-0031	06/06/05	05/06/05	(S) Soybean oil, mixed esters with pentaerythritol and tung oil
P-05-0033	05/11/05	04/12/05	(G) Substituted benzene
P-05-0035	06/06/05	05/15/05	(G) Substituted aryl acetonitrile
P-05-0108	06/03/05	05/11/05	(S) 2-propenoic acid, 2-methyl-, polymer with 2-hydroxyethyl 2-methyl-2-propenoate and methyl 2-methyl-2-propenoate, 2,2′-azobis[2-methylpropanenitrile]-initiated
P-05-0142	05/12/05	04/29/05	(G) Alkyl acrylate, polymer with alkyl acrylate, alkylacrylamide, and alkyl acid
P-05-0160	05/24/05	04/26/05	(G) Polyethylene glycol esters of fatty acids
P-05-0161	05/24/05	04/25/05	(G) Polyethylene glycol esters of fatty acids
P-05-0226	05/13/05	05/04/05	(G) Polyalkoxylated aromatic colorant
P-05-0237	05/18/05	04/26/05	(G) Hexamethylene diisocyanate/carbonate/caprolactone/ether prepolymer
P-05-0260	05/19/05	05/10/05	(G) Aminoalkoxypolysiloxane
P-05-0261	06/06/05	05/22/05	(G) Phenol-substituted amide
P-05-0279	05/25/05	05/11/05	(G) Polyurethane polymer
P-05-0284	05/18/05	05/08/05	(G) Styrene acrylate copolymer
P-05-0300	06/01/05	05/06/05	(G) Niobium organic compound
P-05-0305	05/19/05	05/10/05	(S) Tall-oil pitch, sapond., sterol-low
P-05-0307	05/16/05	05/12/05	(S) Ruthenium, [1,3-bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene]dichloro(phenylmethylene) (tricyclohexylphosphine)-, (sp-5-41)-
P-05-0308	05/27/05	05/25/05	(S) 2-propenoic acid, polymer with ethenylbenzene and (1-methylethenyl)benzene, compound with 2-aminoethanol
P-05-0334	05/31/05	05/23/05	(S) Aluminum hydroxycarbonate
P-05-0337	06/06/05	06/01/05	(G) Diphenylcaprylmethicone
P-92-0979	06/02/05	05/24/05	(G) Blocked aromatic polyisocyanate

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: June 16, 2005.

Vicki A. Simons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.