95-15430. National Emission Standards for Chromium Emissions From Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks  

  • [Federal Register Volume 60, Number 123 (Tuesday, June 27, 1995)]
    [Rules and Regulations]
    [Pages 33122-33123]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 95-15430]
    
    
    
    =======================================================================
    -----------------------------------------------------------------------
    
    ENVIRONMENTAL PROTECTION AGENCY
    
    40 CFR Part 63
    
    [AD-FRL-5226-1]
    
    
    National Emission Standards for Chromium Emissions From Hard and 
    Decorative Chromium Electroplating and Chromium Anodizing Tanks
    
    AGENCY: Environmental Protection Agency (EPA).
    
    ACTION: Final rule; correction.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This action corrects errors and clarifies regulatory text in 
    the final rule published on January 25, 1995, at 60 FR 4948 concerning 
    national emission standards for chromium emissions from hard and 
    decorative chromium electroplating and chromium anodizing tanks.
    
    EFFECTIVE DATE: These corrections become effective June 27, 1995.
    
    FOR FURTHER INFORMATION CONTACT: Mr. Lalit Banker, Emission Standards 
    Division (MD-13), U.S. Environmental Protection Agency, Office of Air 
    Quality Planning and Standards, Research Triangle Park, North Carolina 
    27711, telephone number (919) 541-5420.
    
    SUPPLEMENTARY INFORMATION: On January 25, 1995, the EPA promulgated in 
    the Federal Register (60 FR 4948) final national emission standards for 
    chromium emissions from hard and decorative chromium electroplating and 
    chromium anodizing tanks. These standards were promulgated as subpart N 
    in 40 CFR part 63. As published, the final regulations contain errors 
    which may prove to be misleading and are in need of clarification. This 
    document contains corrections to editorial errors in the final 
    standards.
    
    List of Subjects in 40 CFR Part 63
    
        Environmental Protection, Air pollution control, Hazardous 
    substances, Reporting and recordkeeping requirements.
    
        Dated: June 15, 1995.
    Richard D. Wilson,
    Acting Assistant Administrator for Air and Radiation.
    
        For the reasons set out in the preamble, title 40, chapter I, part 
    63 subpart N of the Code of Federal Regulations is corrected as 
    follows:
    
    PART 63--[CORRECTED]
    
        1. On page 4963, in the first column, the designations (b)(4) and 
    (5) are corrected to read (b)(5) and (6) in Sec. 63.14 and amendatory 
    instruction number 2 is corrected to read:
        ``2. Section 63.14 is amended by adding paragraphs (b)(5) and (6) 
    to read as follows:''
        2. On page 4966, in the second column, Sec. 63.342 in paragraph 
    (f)(3)(iv) line 8, is corrected to read ``for that even and shall 
    report by phone such''.
        3. On page 4966, in the third column, Sec. 63.343 in paragraph 
    (a)(2) last line, is corrected to read ``schedule of Sec. 63.6 
    (b)(1).''
        4. On page 4967, in the second column, Sec. 63.343 in paragraph 
    (a)(5) last line, is corrected to read ``that the large designation is 
    met, or by the compliance date specified in paragraph (a)(1)(ii) of 
    this section, whichever is later.''
        5. On page 4979, in the first column, paragraph 1.2, after the 
    first sentence add the sentence ``The sample time has to be at least 2 
    hours.''
        6. On page 4986, in the third column, paragraph 3.1.1, in line 2, 
    the word ``inner'' is corrected to read ``inside.''
        7. On page 4988, in the first column, paragraph 3.1.4, in line 4, 
    the word ``absorbing'' is corrected to read ``pollutant in the 
    absorbing.'' Also, in line 8, the word ``bleak-tight'' is corrected to 
    read ``leak-tight.''
        8. On page 4988, in the third column, paragraph 5.1.1.1, in line 9, 
    the word ``velocity'' is corrected to read ``velocity pressure.''
        9. On page 4990, in the second column, paragraph 5.1.1.3, in lines 
    4 and 5, remove the words ``using velocity [[Page 33123]] traverse data 
    obtained earlier in the day.''
        10. On page 4990, in the third column, paragraph 5.1.1.3, in line 
    1, remove the word ``velocity.''
        11. On page 4990, in the second column, paragraph 5.1.1.5, in lines 
    2 and 3, remove the words ``before sampling.''
        12. On page 4992, in the first column, paragraph 5.1.2.2, in line 
    2, the words ``and turn'' are corrected to read ``and seal the port. 
    Turn.''
        13. On page 4993, in the second column, paragraph 1.2, in line 7, 
    the word ``bathreduces'' is corrected to read ``bath reduces.''
        14. On page 4993, in the second column, paragraph 2.2, in line 1, 
    the words ``Preciser Tensiometer: A Preciser'' are corrected to read 
    ``Tensiometer: A.''
        15. On page 4993, in the second column, paragraph 3.1, in lines 2 
    and 5, remove the words ``Preciser.''
        16. On page 4993, in the third column, paragraph 3.2.(b), in line 
    2, the figure ``40'' is corrected to read ``45.''
        17. On page 4993, in the third column, paragraph 4.2, in line 6, 
    remove the word ``Preciser.''
    
    [FR Doc. 95-15430 Filed 6-26-95; 8:45 am]
    BILLING CODE 6560-50-P
    
    

Document Information

Effective Date:
6/27/1995
Published:
06/27/1995
Department:
Environmental Protection Agency
Entry Type:
Rule
Action:
Final rule; correction.
Document Number:
95-15430
Dates:
These corrections become effective June 27, 1995.
Pages:
33122-33123 (2 pages)
Docket Numbers:
AD-FRL-5226-1
PDF File:
95-15430.pdf
CFR: (1)
40 CFR 63