-
Start Preamble
AGENCY:
Grain Inspection, Packers and Stockyards Administration, USDA.
ACTION:
Correcting amendments.
SUMMARY:
This document contains corrections to the final regulations 7 CFR part 868, which were published in the Federal Register of September 30, 2002. The regulations related to changes to the U.S. Standards for Milled Rice which established a new level of milling degree, “hard milled”, to the existing milling requirements and eliminated reference to “lightly milled” from the milling requirements of U.S. Standards for Milled Rice.
DATES:
Effective June 29, 2005.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Vicki Lacefield, at her e-mail address: Vicki.A.Lacefield@usda.gov or telephone her at (202) 720-0252.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
On September 30, 2002, the Grain Inspection, Packers and Stockyards Administration (GIPSA) published in the Federal Register (67 FR 61249) a direct final rule that revised the United States Standards for Milled Rice to establish a new level of milling degree, “hard milled,” to the existing milling requirements and to eliminate reference to “lightly milled” from the milling Start Printed Page 37255requirements of U.S. Standards for Milled Rice.
Need for Correction
As published, the direct final rule contains errors which may prove to be confusing and needs to be clarified. In Section 868.310(f) U.S. Sample grade, the word “re” should read “or”; in § 868.311, the correct wording for that section should read “Grades and grade requirements for the class Second Head Milled Rice. (See also § 868.315)”, instead of “Grades and grade requirements for the class Second Head Milled Rice. (See also § 868.305.)”; and in § 868.312, the correct wording for that section should read “Grades and grade requirements for the class Screenings Milled Rice. (See also § 868.315.)”, instead of “Grades and grade requirements for the class Brewers Milled Rice. (See also § 868.315).”
Start List of SubjectsList of Subjects in 7 CFR Part 868
- Agricultural commodities
- Rice
PART 868—GENERAL REGULATIONS AND STANDARDS FOR CERTAIN AGRICULTURAL COMMODITIES
End Part Start Amendment Part1. The authority citation for part 868 continues to read as follows:
End Amendment Part Start Amendment Part2. Amend § 868.310 by revising note (f) of the table to read as follows:
End Amendment PartGrades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also § 868.315.)* * * * *(f) Contains two or more live or dead weevils or other insects, insect webbing, or insect refuse;
* * * * *3. Revise the heading of § 868.311 read as follows:
End Amendment PartGrades and grade requirements for the class Second Head Milled Rice. (See also § 868.315.)4. Revise the heading of § 868.312 to read as follows:
End Amendment PartGrade and grade requirements for the class Screenings Milled Rice. (See also § 868.315.)David R. Shipman,
Acting Administrator, Grain Inspection, Packers and Stockyards Administration.
[FR Doc. 05-12815 Filed 6-28-05; 8:45 am]
BILLING CODE 3410-EN-P
Document Information
- Effective Date:
- 6/29/2005
- Published:
- 06/29/2005
- Department:
- Grain Inspection, Packers and Stockyards Administration
- Entry Type:
- Rule
- Action:
- Correcting amendments.
- Document Number:
- 05-12815
- Dates:
- Effective June 29, 2005.
- Pages:
- 37254-37255 (2 pages)
- Topics:
- Agricultural commodities, Rice
- PDF File:
- 05-12815.pdf
- CFR: (3)
- 7 CFR 868.310
- 7 CFR 868.311
- 7 CFR 868.312