2010-13627. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before July 9, 2010.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2010-0408, by one of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.

• Mail: Document Control Office (7407M), Office of Chemical Safety and Pollution Prevention (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

• Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2010-0408. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2010-0408. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Chemical Safety and Pollution Prevention Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; fax number: [phone]; e-mail address: [e-mail].

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 100 Premanufacture Notices Received From: 03/01/10 to 04/23/10

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-10-0253	03/01/10	05/29/10	CBI	(G) Thermoset molding compound; Nondispersive use	(G) Methacrylate ester capped aromatic ether polymer
P-10-0254	03/01/10	05/29/10	Piedmont Chemical Industries I, LLC.	(S) Ultra violet curable wood coatings; ultra violet curable metal coatings	(S) 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester, reaction products with dicyclopentadiene, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, maleic anhydride and 2-methyl-1,3-propanediol
P-10-0255	03/01/10	05/29/10	Piedmont Chemical Industries I, LLC	(S) Ultra violet curable wood coatings; ultra violet curable metal coatings	(S) 2-propenoic acid, 2-hydroxyethyl ester, reaction products with dicyclopentadiene, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, maleic anhydride and 2-methyl-1,3-propanediol
P-10-0256	03/01/10	05/29/10	CBI	(S) Coupling agent for plastics; coupling agent for rubbers	(S) Titanium, Bu alc. 2-ethyl-1-hexanol oleate stearate complexes
P-10-0257	03/01/10	05/29/10	CBI	(S) Polyurethane elastomer	(S) 1,4-butanediol, polymer with 2,4-diisocyanato-1-methylbenzene and .alpha.-hydro-.omega.-hydroxypoly[oxy(methyl-1,2-ethanediyl)]
P-10-0258	03/01/10	05/29/10	CBI	(G) Pigment additive	(G) Sulfonated heteropolycycle
P-10-0259	03/01/10	05/29/10	CBI	(G) Pigment additive	(G) Sulfonated heteropolycycle
P-10-0260	03/02/10	05/30/10	H.B. Fuller	(G) Industrial adhesive	(G) Isocyanate-functional polyurethane prepolymer
P-10-0261	03/02/10	05/30/10	H.B. Fuller	(G) Industrial adhesive	(G) Isocyanate-functional polyurethane prepolymer
P-10-0262	03/02/10	05/30/10	Piedmont Chemical Industries I, LLC	(S) Ultra violet curable inks	(S) Fatty acids, C18-unsaturated, dimers, hydrogenated, bi[3-[(1-oxo-2-propen-1-yl)oxy]-2,2-bis[[(1-oxo-2-propen-1-yl)oxy]methyl]propyl] esters
P-10-0263	03/04/10	06/01/10	Marubeni Specialty Chemicals Inc.	(G) Polymeric component	(G) Substituted cyclomethacrylate
P-10-0264	03/04/10	06/01/10	CBI	(G) Monomer	(G) Methacrylate ester of fatty alcohol alkoxylate
P-10-0265	03/04/10	06/01/10	CBI	(S) Coatings for car leather; water borne industrial coatings like wood	(G) Hexamethylenediisocyanate homopolymer, alkyl-oxy-terminated
P-10-0266	03/04/10	06/01/10	CBI	(S) Antioxidant for plastic articles	(G) Propanoic acid, alkylthio, (1,1-dimethylethyl) - [[alkyl-4-hydroxy-2-alkylphenyl]thio]alkylphenyl ester
P-10-0267	03/05/10	06/02/10	CBI	(G) Laundry detergent component	(G) Acrylate copolymer
P-10-0268	03/05/10	06/02/10	CBI	(G) Laundry detergent component	(G) Acrylate copolymer
P-10-0269	03/09/10	06/06/10	CBI	(S) Extrusion of tubing systems; injection molding of special applications	(G) Polymer of aromatic dicarboxylic acid and alkane diamine
P-10-0270	03/10/10	06/07/10	CBI	(G) Raw material	(G) Aromatic polyester
P-10-0271	03/12/10	06/09/10	CBI	(G) Material for electronic parts	(G) Alkyl bis(methoxymethyl)hydrocarbomocycle
P-10-0272	03/10/10	06/07/10	Robertet, Inc.	(S) As an odoriferous component of fragrance compounds	(S) Oils, Macrocystis pyrifera
P-10-0273	03/12/10	06/09/10	CBI	(G) Treatment for textiles	(G) Perfluoroalkylethyl methacrylate copolymer
P-10-0274	03/12/10	06/09/10	CBI	(G) Adhesive component	(G) 1,1′-methylenebis[isocyanatobenzene], polymer with polyester polyols and a polyether polyol
P-10-0275	03/15/10	06/12/10	CBI	(G) Material for electronic parts	(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidene polycarbomonocycle
P-10-0276	03/15/10	06/12/10	CBI	(G) Antiswelling agent for clay	(G) Polyethylene polyammonium salt
P-10-0277	03/15/10	06/12/10	CBI	(G) Material for electronic parts	(G) [5,5′-biisobenzofuran]-1,1′,3,3′-tetrone, polymer with 1,4-benzenediamine, 4,4′-oxybis[benzenamine] and alkylaminosiloxane
P-10-0278	03/15/10	06/12/10	CBI	(G) Material for electronic parts	(G) Polycarbomono cyclic sulphonium camphosulphonate
P-10-0279	03/15/10	06/12/10	CBI	(G) Material for electronic parts	(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidyne polycarbomocycle
P-10-0280	03/15/10	06/12/10	CBI	(G) Adhesion promoter, corrosion inhibitor	(G) Aluminum B-alanine complex
P-10-0281	03/17/10	06/14/10	CBI	(G) Component of foam	(G) Fatty acid polymer with aliphatic diol and aromatic diacid
P-10-0282	03/17/10	06/14/10	CBI	(G) Component in injection molded parts	(G) Maleated nylon graft copolymer
P-10-0283	03/17/10	06/14/10	CBI	(G) Component in injection molded parts	(G) Maleated nylon graft copolymer
P-10-0284	03/17/10	06/14/10	CBI	(G) Chemical intermediate	(G) Boron ester
P-10-0285	03/17/10	06/14/10	Syngenta Crop Protection, Inc.	(S) Intermediate	(S) Benzoic acid, 3-amino-2-mercapto-
P-10-0286	03/19/10	06/16/10	Instrumental polymer technologies, LLC.	(G) Resin for coatings	(G) Hydroxyl-terminated aliphatic polycarbonate
P-10-0287	03/19/10	06/16/10	Instrumental Polymer Technologies, LLC.	(G) Resin for coatings	(G) Hydroxyl-terminated aliphatic polycarbonate
P-10-0288	03/19/10	06/16/10	Instrumental Polymer Technologies, LLC.	(G) Resin for coatings	(G) Hydroxyl-terminated aliphatic polycarbonate
P-10-0289	03/18/10	06/15/10	Instrumental Polymer Technologies, LLC.	(G) Resin for coatings	(G) Hydroxyl-terminated aliphatic polycarbonate
P-10-0290	03/22/10	06/19/10	Reichhold, Inc.	(S) Base resin for gel coat compounds (used in FRP applications)	(G) Methacrylate terminated polyester
P-10-0291	03/23/10	06/20/10	FRX Polymers, Inc.	(G) FRX phosphonate oligomer is a non-halogenated flame retardant additive that addresses the need to replace current commercial bromide-containing flame retardant additives that are being phased out due to environmental regulation. Flame retardants are required to meet fire safety standards in order to reduce flammability of combustible materials.	(S) CA index name of respective polymer: Phosphonic acid, p-methyl-, diphenyl ester, polymer with 4,4′(1methylethylidene)bis[phenol]
P-10-0292	03/23/10	06/20/10	CBI	(G) Lubricant oil additive	(G) Alkanoic acid, mixed esters with dipentaerythritol and pentaerythritol
P-10-0293	03/23/10	06/20/10	CBI	(G) Additive	(G) Methacrylate copolymer
P-10-0294	03/24/10	06/21/10	Scott bader, Inc.	(G) Resin or resin additive	(G) Unsaturated urethane acrylate
P-10-0295	03/25/10	06/22/10	CBI	(G) Component of foam	(G) Fattay acid polymer with aliphatic diol and aromatic diacid
P-10-0296	03/26/10	06/23/10	3M	(G) Fluorinated chemical intermediate	(G) Fluorinated carboxylic acid
P-10-0297	03/26/10	06/23/10	3M	(G) Fluorinated chemical intermediate	(G) Fluorinated alcohol
P-10-0298	03/26/10	06/23/10	3M	(G) Fluorinated intermediate	(G) Fluorinated carboxylate ester
P-10-0299	03/26/10	06/23/10	3M	(G) Fluorinated intermediate	(G) Perfluoroalkoxyalkyl vinyl ether
P-10-0300	03/26/10	06/23/10	3M	(G) Fluorinated emulsifier	(G) Fluorinated surfactant
P-10-0301	03/25/10	06/22/10	Robertet, Inc.	(S) As an odoriferous component of fragrance compounds	(S) Oils, laminaria digitata
P-10-0302	03/29/10	06/26/10	CBI	(G) Destructive use in fuels	(G) Fatty acid amine salt
P-10-0303	03/30/10	06/27/10	CBI	(G) Constituent in ink formulation	(G) Heterocycle, disubstituted, salt with anion (1:1)
P-10-0304	03/30/10	06/27/10	CBI	(S) Acid dye for coloring anodized aluminum	(G) Product is a trivalent chrome complex of an azo dye
P-10-0305	03/29/10	06/26/10	CBI	(G) Paint component	(S) Acetic acid ethenyl ester, polymer with ethane and methyl 2-methyl-2-propenoate
P-10-0306	03/30/10	06/27/10	CBI	(S) Binder for car repair putty	(G) Unsaturated polyester resin
P-10-0307	03/30/10	06/27/10	Dubois Chemicals Inc.	(S) Industrial boiler treatment	(G) Powdered amine
P-10-0308	03/30/10	06/27/10	Oleon Americas, Inc.	(G) Industrial hydraulic fluid	(S) Fatty acids, C16-18 and C18-unsaturated, mixed esters with adipic acid and trimethylolpropane
P-10-0309	03/30/10	06/27/10	CBI	(S) Acid dye for coloring anodized aluminum	(G) Product is a trivalent chrome complex of an azo dye
P-10-0310	03/30/10	06/27/10	Futurefuel Chemical Company	(S) Monomer in alkyl resins; monomer in surfactants solvent; antifreeze in paints and coatings; coalecing aid - inks and coatings	(S) Glycerol formal 5-hydroxy-1,3-dioxane
P-10-0310	03/30/10	06/27/10	Futurefuel Chemical Company	(S) Monomer in alkyl resins; monomer in surfactants solvent; antifreeze in paints and coatings; coalecing aid - inks and coatings	(S) Glycerol formal isomeric mixture of 4-hydroxymethyl-1,3-dioxolane
P-10-0311	04/01/10	06/29/10	CBI	(S) Release agent	(G) Alkyl alkoxy siloxane
P-10-0312	04/01/10	06/29/10	Akzo Nobel Coatings Inc.	(S) Dispersant for the preparation of stir-in pigments in car paints	(S) 2,5-furandione, telomer with ethenylbenzene and (1-methylethyl)benzenem imides with polyethylene-polypropylene glycol 2-aminopropyl me ether
P-10-0313	04/01/10	06/29/10	ICI Performance Products LP	(S) Opacifying pigment for ceramic whiteware	(S) Diphosphoric acid, calcium salt (1:1)
P-10-0314	03/23/10	06/20/10	Sasol Chemicals North America, LLC	(S) Printing ink component, acts as gallant, rheological modifier; for industrial use only; no known consumer uses	(S) Aluminum, (2-butanolato)bis[ethyl-3-(oxo-, .kappa., O)butanoato-,.kappa., O′]-
P-10-0315	03/31/10	06/28/10	CBI	(S) Release agent	(G) Me alkyl siloxane
P-10-0316	03/31/10	06/28/10	CBI	(G) Monomer for polymer for textile treatment additive	(G) Perfluoroalkyl acrylate
P-10-0317	03/31/10	06/28/10	CBI	(G) Paper treatment additive	(G) Fluoroalkyl acrylate copolymer
P-10-0318	04/02/10	06/30/10	3M Company	(S) Dispersant	(G) Propylene oxide ligand
P-10-0319	04/02/10	06/30/10	CBI	(G) Polyamide phenol for coatings, open, non-dispersive use	(G) Aromatic halogenated acid, polymer with a halogenated aromatic diamine and an aromatic phenolic amine
P-10-0320	04/02/10	06/30/10	CBI	(G) Open, non-dispersive use	(G) Aromatic dianhydride, polymer with an aromatic diamine and an aliphatic unsaturated ester
P-10-0321	04/02/10	06/30/10	CBI	(G) Concrete additive	(G) Modified phenol resin
P-10-0322	04/02/10	06/30/10	CBI	(G) Concrete additive	(G) Modified phenol resin
P-10-0323	03/15/10	06/12/10	Canon U.S.A., Inc.	(G) Additive for ink jet printing ink	(G) Alkyl methacrylate polymer with branched benzene, alkyl acrylate, hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt
P-10-0324	04/01/10	06/29/10	CBI	(S) Curing agent or accelerator for epoxy resin	(G) Urea, N,N′-(methyl-1,3-phenylene)bis[N′,N′-bis[3-(polyalkyleneamino]-, compound with formaldehyde polymer with phenol
P-10-0325	04/05/10	07/03/10	The Goodyear Tire and Rubber Company	(S) Polymerization catalyst	(G) Neodymium ziegler-natta catalyst
P-10-0326	04/02/10	06/30/10	CBI	(G) Site-limited intermediate	(S) Propane, 1,1,1,2,3,3-hexafluoro-
P-10-0327	04/02/10	06/30/10	CBI	(G) Site-limited intermediate	(S) 1-propene, 1,2,3,3,3-pentafluoro-
P-10-0328	04/05/10	07/03/10	H.B. Fuller	(G) Industrial adhesive	(G) 2-propenoic acid, 2-mehyl-, alkyl ester, polymer with ethenyl acetate, N-(hydroxymethyl)-2-propenamide, methyl 2-methyl-2-propenoate and alkyl methacrylate
P-10-0329	04/05/10	07/03/10	CBI	(G) Finishing agent for textile goods	(S) Hexadecanamide, N-[3-(hexadecyloxy)-2-hydroxypropyl]-N-(2-hydroxyethyl)-
P-10-0330	04/05/10	07/03/10	CBI	(G) Component of fragrance mixture for highly dispersive applications.	(G) Trimethylpentene oxymethylpropyl ester of cyclopropanecarboxylic acid
P-10-0331	04/05/10	07/03/10	Reichhold, Inc.	(S) Carrier resin for coatings	(G) Amine salt of vegetable oil, polymer with hydroxy substituted carboxylic acid, aliphatic diisocyanate, tetra hydroxy alkane and polyol
P-10-0332	04/06/10	07/04/10	CBI	(S) Polyol for rigid foam	(G) Amino alcohol substituted phenol
P-10-0333	04/06/10	07/04/10	CBI	(S) Industrial monomer to be polymerized or reacted.	(G) 1,4:3,6-dianhydrohexitol-, reaction produc6s with chloro-oxopropoxy-benzoic acid and hydroxy-methoxybenzoic acid
P-10-0334	04/06/10	07/04/10	CBI	(S) Industrial monomer to be polymerized or reacted.	(G) Benzoic acid, (acryloxy)alkoxy-, 1,1′-(methylphenylene) ester
P-10-0335	04/06/10	07/04/10	CBI	(G) Metal coating(surface treatment)	(G) Polyester type urethane resin
P-10-0336	04/06/10	07/04/10	CBI	(G) Reactive diluent for unsaturated polyester and vinyl ester	(G) Acrylated polyester oligomer
P-10-0337	04/06/10	07/04/10	CBI	(G) Reactive diluent for unsaturated polyester and vinyl ester	(G) Methacrylated polyester oligomer
P-10-0338	04/06/10	07/04/10	CBI	(G) Laundry detergent component	(G) Acrylate copolymer
P-10-0339	04/06/10	07/04/10	CBI	(G) Laundry detergent component	(G) Acrylate copolymer
P-10-0340	04/05/10	07/03/10	Henkel adhesives	(S) Hot melt adhesive	(S) Fatty acids, C 18-unsaturated, dimers, polymers with ethylenediamine, piperazine, polypropylene glycol diamine, sebacic acid and tall-oil fatty acids
P-10-0341	04/05/10	07/03/10	CBI	(S) Crosslinker for polymers	(G) Polyether polycarbodiimide
P-10-0342	04/06/10	07/04/10	Bimax Inc.	(S) Intermediate for production of dispersant polymer for paint colorants	(G) Poly 2-ethylhexyl methacrylate
P-10-0343	04/09/10	07/07/10	Marubeni Specialty Chemicals Inc.	(G) Polymeric component	(G) Substituted cyclomethacrylate
P-10-0344	04/05/10	07/03/10	CBI	(G) Plasticizing component of a two part coating	(G) Phenoxy alkyl ether
P-10-0345	04/16/10	07/14/10	CBI	(G) Printing ink additive	(G) Hexanoic acid, 6-[[2-[[5-[[2,7-dihydro-3-methyl-2,7-dioxo-1-(3-sulfobenzoyl)-heteropolycycle-6-yl]amino]-2,4-disulfophenyl]amino]-2-oxoethyl]amino]-, ammonium sodium salt (1:?:?)
P-10-0346	04/16/10	07/14/10	CBI	(G) Printing ink additive	(G) Copper, phthalic anhydride-2,3-pyridinedicarboxylic acid-urea reaction products complexes, aminosulfonylsulfo[[2-[[4-[(2-sulfoethyl)amino]-6-[(4-sulfophenyl)amino]-monoheterocycle-2-yl]amino]ethyl]amino]sulfonyl derivates, sodium salts
P-10-0347	04/19/10	07/17/10	CBI	(S) Electrical insulating varnish for motors, generators, transformers	(G) Modified polyester
P-10-0348	04/16/10	07/14/10	Dow Chemical Company	(S) Chemical intermediate	(G) Cyclic nitrile aldehyde
P-10-0349	04/16/10	07/14/10	Dow Chemical Company	(S) Chemical intermediate	(G) Cyclic nitrile aldehyde
P-10-0350	04/16/10	07/14/10	Dow Chemical Company	(S) Chemical intermediate	(G) Cyclic nitrile aldehyde
P-10-0351	04/16/10	07/14/10	Zeon Chemicals L.P.	(S) Automotive seals and gaskets	(G) Modified acrylonitrile, butadiene polymer, hydrogenated

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 57 Notices of Commencement From: 03/01/10 to 04/23/10

Case No.	Received Date	Commencement Notice End Date	Chemical
P-03-0481	03/08/10	01/28/10	(S) 5,2,6-(iminomethenimino)-1 H-imidazo[4,5-b]pyrazine, octahydro-1,3,4,7,8,10-hexanitro-
P-03-0568	03/08/10	01/28/10	(S) 5,2,6-(iminomethenimino)-1 H-imidazo[4,5-b]pyrazine, 1,3,8,10-tetraacetyloctahydro-
P-03-0789	03/22/10	03/09/10	(G) Derivatized butyl ester photoinitiator
P-06-0393	03/18/10	02/10/10	(G) Aliphatic urethane acrylate oligomer
P-06-0494	03/01/10	02/23/10	(G) Fluoroalkyl methacrylate copolymer
P-06-0598	03/08/10	03/01/10	(G) Polyester polyol urethane modified epoxy resin
P-06-0825	04/20/10	03/24/10	(G) Oxepanone, polymer with dialkyl-alkanediol, alkyl-(hydroxyaalkyl)-alkanediol, carbocycle, isocyanato-(isocyanatoalkyll)-trialkyl-, alkanoic acid, hydroxy-(hydroxyalkyl)-alkyl-, alkylamine, N,N-dialkyl-, aminoalkyl-trialkylcarbocyclicamine, and alkyldiamine
P-06-0832	04/16/10	03/31/10	(S) Fatty acids, palm-oil, me esters
P-06-0833	04/16/10	03/19/10	(S) Fatty acids, peanut-oil, me esters
P-06-0834	04/16/10	03/22/10	(S) Fatty acids, linseed-oil, me esters
P-07-0328	03/05/10	02/12/10	(G) NCS 2: Substituted phenol
P-07-0425	04/09/10	03/16/10	(G) MDI polyether prepolymer
P-07-0690	04/12/10	04/02/10	(G) Polyester amine adduct
P-08-0125	03/30/10	03/05/10	(G) Methacrylate ester of a polyester from an aromatic dicarboxylate and alkyl polyols
P-08-0138	04/14/10	03/30/10	(S) Carbonotrithioic acid, bis(phenylmethyl)ester
P-08-0165	04/16/10	05/21/08	(G) Extract of tea
P-08-0561	04/16/10	11/25/08	(G) Cycloalkyl piperonyl ether
P-08-0647	03/08/10	02/23/10	(S) Extractives and their physically modified derivatives. Jasminum sambac. Oils, jasmine, jasminum sambac
P-08-0672	03/26/10	03/02/10	(G) Polyester polyurethane aqueous dispersion
P-09-0058	03/23/10	03/04/10	(G) Alkenylsuccinicanhydride derivative
P-09-0179	04/07/10	04/02/10	(G) Fatty acids, dimers, polymers with dihydroxyfunctional monocarboxylic acid, alkane diol, alkyl isocyanate, alkanediol, aromatic anhydride, glycol ether and alkanetriol, compounds with amino alcohol
P-09-0269	03/11/10	03/08/10	(G) Crosslinked polystyrene resin with chelating bispicolylamine groups
P-09-0332	04/21/10	04/08/10	(G) Phosphonic acid ester
P-09-0371	03/03/10	01/31/10	(G) Organic acid metal halide complex
P-09-0372	03/08/10	02/23/10	(S) Oils, spartium junceum
P-09-0381	03/17/10	02/19/10	(G) Polycarbonate diol
P-09-0418	03/22/10	03/01/10	(G) Surface modified aluminum hydroxide
P-09-0463	03/18/10	02/14/10	(G) Salt of polymer of methylenebis[isocyanatocarbomonocycle],alkanepolyols and amine derivatives
P-09-0500	03/02/10	01/23/10	(G) 1,4-benzenedisulfonic acid, 2,2′-[1,2-ethenediylbis[(3-sulfo-4,1-phenylene)imino[6-[bis(alkanol)amino]-1,3,5-triazine-4,2-diyl]imino]]bis-, hexasodium salt
P-09-0525	04/06/10	03/18/10	(G) Hydroxyamino aryl amine
P-09-0526	04/06/10	03/18/10	(G) Hydroxyamino aryl triamine
P-09-0562	03/01/10	02/16/10	(G) Polymer of acrylamido alkyl propane sulfonic acid sodium ammonium salt and two acrylic monomers
P-09-0597	03/08/10	02/23/10	(S) Oils, cypress, cypressus funebris
P-09-0634	04/05/10	03/16/10	(S) Phenol, 4-(1,1-dimethylethyl)-2-nitro-
P-09-0647	03/05/10	02/05/10	(G) Fatty acids, C18-unsaturted, dimers, polymers with glycidyl alkanoate, 4-oxopentanoic acid and trimethylolpropane
P-09-0649	04/16/10	04/08/10	(G) 2,5-furandione, polymer with alkene, alkyl ester, substituted imidazoline amide
P-09-0650	03/08/10	02/18/10	(G) Dimer fatty acid based polyester polyurethane
P-10-0035	04/16/10	03/17/10	(G) Sodium carboxylate
P-10-0041	03/12/10	02/11/10	(G) Polyether polyacid comb polymer
P-10-0051	03/17/10	03/10/10	(S) Starch, 2-carboxyethyl 2-methyl-3-oxo-3-[[3-(trimethylammonio)propyl]amino]propyl ether, chloride
P-10-0053	04/02/10	03/26/10	(G) Halogenated aromatic amine
P-10-0074	04/19/10	03/23/10	(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2-propen -1-yl)oxy]ethyl ester, polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, 2-ethylhexyl 2-propenoate, methyl 2-methyl-2-propenoate, phosphoric acid, di-ester with hydroxy ethyl methacrylate and 2-(phosphonooxy) ethyl 2-methyl-2-propenoate
P-10-0075	04/06/10	03/11/10	(G) Brominated aromatic polyether polyester
P-10-0077	03/11/10	03/04/10	(G) Linear hydroxy funtional polyester
P-10-0078	03/08/10	02/27/10	(G) Capped polyurethane adduct
P-10-0082	03/18/10	02/27/10	(S) 1,2,3-propanetriol, homopolymer, hexadecanoate octadecanoate
P-10-0085	03/16/10	03/05/10	(G) Bismuth salt of lactic acid
P-10-0100	03/25/10	03/21/10	(G) Polyester amine compound
P-10-0102	04/01/10	03/24/10	(S) Oils, jasmine, jasminum sambac
P-10-0103	04/19/10	03/26/10	(S) Fatty acids, C18-unsaturated, di-me esters, hydrogenated, polymers with diethylene glycol, 1,6-diisocyanato-2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4-trimethylhexane, 2-heptyl-3,4-bis(9-isocyanatononyl)-1-pentylcyclohexane, 1,1′-methylenebis[4-isocyanatobenzene], 2-oxepanone and tricyclodecanedimethanol, 2-hydroxyethyl acrylate-blocked
P-10-0140	04/16/10	03/31/10	(G) Urethane modified epoxy resin
P-10-0142	04/12/10	04/01/10	(G) Furan, 2-(1,1-dimethylethyl)-2, 5-dihydro-alkyl substituted
P-10-0143	04/08/10	04/02/10	(G) Hydroxyl-terminated aliphatic polycarbonate
P-10-0147	04/19/10	04/03/10	(G) Alkoxylated alkylamine
P-10-0149	04/19/10	04/07/10	(G) Alkoxylated alkylamine salt
P-10-0165	04/19/10	04/09/10	(G) Polyester resin
P-99-0332	03/18/10	03/01/10	(G) Urethane modified aromatic isocyanate

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: May 14, 2010.

Darryl S. Ballard,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.