[Federal Register Volume 59, Number 131 (Monday, July 11, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-16665]
[[Page Unknown]]
[Federal Register: July 11, 1994]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
[Docket No. 940684-4184]
RIN 0693-AB32
Proposed Revision of Federal Information Processing Standard
(FIPS) 21-3, COBOL
AGENCY: National Institute of Standards and Technology (NIST),
Commerce.
ACTION: Notice; Request for comments.
-----------------------------------------------------------------------
SUMMARY: This proposed revision of Federal Information Processing
Standard (FIPS) 21-3, COBOL, which adopts ANSI X3.23-1985, and ANSI
X3.23a 1989, is being proposed for Federal use. This revision will
adopt the forthcoming amendment (ANSI X3.23b-1993) to American National
Standard for COBOL which adds corrections and clarification to the
language. The proposed amendment is upwardly compatible with the
current standard except for the reserved word FUNCTION.
Prior to the submission of this proposed revision to FIPS PUB 21-3
to the Secretary of Commerce for review and approval, it is essential
to assure that consideration is given to the needs and views of
manufacturers, the public, and state and local governments. The purpose
of this notice is to solicit such views.
This proposed FIPS contains two sections: (1) An announcement
section, which provides information concerning the applicability,
implementation, and maintenance of the standard; and (2) a
specifications section which deals with the technical requirements of
the standard. Only the announcement section of the standard is provided
in this notice. Interested parties may obtain copies of the
specifications (ANSI X3.23-1985, ANSI X3.23a-1989, and ANSI X3.23b-
1993) from American National Standards Institute (ANSI), 11 West 42nd
Street, 13th Floor, New York, NY 10036, (212) 642-4900.
DATES: Comments on this proposed revision must be received on or before
October 11, 1994.
ADDRESSES: Written comments concerning the adoption of this proposed
revision as FIPS 21-4 should be sent to: Director, Computer Systems
Laboratory, ATTN: Proposed Revision of FIPS 21-3, COBOL, Technology
Building, Room B-154, National Institute of Standards and Technology,
Gaithersburg, MD 20899.
Written comments received in response to this notice will be made
part of the public record and will be made available for inspection and
copying in the Central Reference and Records Inspection Facility, Room
6020, Herbert C. Hoover Building, 14th Street between Pennsylvania and
Constitution Avenues NW., Washington, DC 20230.
FOR FURTHER INFORMATION CONTACT:
Mr. Arnold Johnson, National Institute of Standards and Technology,
Gaithersburg, MD 20899, (301) 975-3247.
Dated: July 5, 1994.
Samuel Kramer,
Associate Director.
Federal Information Processing Standards Publication 21-4
[proposed]
Announcing the Standard for COBOL
Federal Information Processing Standards Publications (FIPS PUBS)
are issued by the National Institute of Standards and Technology (NIST)
after approval by the Secretary of Commerce pursuant to Section 111(d)
of the Federal Property and Administrative Services Act of 1949 as
amended by the Computer Security Act of 1987, Public Law 100-235.
1. Name of Standard. COBOL (FIPS PUBS 21-4)
2. Category of Standard. Software Standard, Programming Language.
3. Explanation. This publication announces the adoption of American
National Standard COBOL, as specified in ANSI X3.23-1985, X3.23a-1989
and ANSI X3.23b-1993, as a Federal Information Processing Standard
(FIPS) This revision supersedes FIPS PUB 21-3 and reflects corrections
and clarifications to the COBOL specifications. The American National
Standards define the elements of the COBOL programming language and the
rules for their use. The purpose of the standards is to promote
portability of COBOL programs for use on a variety of data processing
systems. The standards are used by implementors as the reference
authority in developing processors and by users who need to know the
precise syntactic and semantic rules of the standard language.
4. Approving Authority. Secretary of Commerce.
5. Maintenance Agency. Department of Commerce, National Institute
of Standards and Technology (NIST).
6. Cross Index.
a. American National Standard for Information Systems--Programming
Language--COBOL, ANSI X3.23-1985, ISO 1989-1985.
b. American National Standard for Information Systems--Programming
Language--Intrinsic Function Module for COBOL, ANSI X3.23a-1989.
c. American National Standard for Information Systems--Programming
Language--Correction and Clarification Amendment for COBOL, ANSI
X3.23b-1993.
7. Related Documents.*
---------------------------------------------------------------------------
*References to most recent revision of FIPS PUBS.
---------------------------------------------------------------------------
a. Federal Information Resources Management Regulation (FIRMR)
Subpart 201.20.303, Standards, and Subpart 201.39.1002, Federal
Standards.
b. Federal Information Processing Standards Publication 29,
Interpretation Procedures for Federal Information Processing Standards
for Software.
c. NBS Special Publication 500-117, Selection and Use of General-
Purpose Programming Languages.
8. Objectives. Federal standards for high level programming
languages permit Federal departments and agencies to exercise more
effective control over the production, management, and use of the
Government's information resources. The primary objectives of Federal
programming language standards are:
--To encourage more effective utilization and management of programmers
by insuring that programming skills acquired on one job are
transportable to other jobs, thereby reducing the cost of programmer
re-training;
--To reduce the cost of program development by achieving the increased
programmer productivity that is inherent in the use of high level
programming languages;
--To reduce the overall software costs by making it easier and less
expensive to maintain programs and to transfer programs among different
computer systems, including replacement systems; and
--To protect the existing software assets of the Federal Government by
insuring to the maximal feasible extent that Federal programming
language standards are technically sound and that subsequent revisions
are compatible with the installed base.
9. Applicability.
a. Federal standards for high level programming languages should be
used for computer applications and programs that are either developed
or acquired for government use. FIPS COBOL is one of the high level
programming language standards provided for use by all Federal
departments and agencies. FIPS COBOL is especially suited for
applications that emphasize the manipulation of characters, records,
files, and input/output (in contrast to those primarily concerned with
scientific and numeric computations).
b. The use of FIPS high level programming languages is strongly
recommended when one or more of the following situations exist:
--It is anticipated that the life of the program will be longer than
the life of the presently utilized equipment.
--The application or program is under constant review for updating of
the specifications, and changes may result frequently.
--The application is being designed and programmed centrally for a
decentralized system that employs computers of different makes, models
and configurations.
--The program will or might be run on equipment other than for which
the program is initially written.
--The program is to be understood and maintained by programmers other
than the original ones.
--The advantages of improved program design, debugging, documentation
and intelligibility can be obtained through the use of this high level
language regardless of interchange potential.
--The program is or is likely to be used by organizations outside the
Federal Government (i.e., State and local governments, and others).
c. Nonstandard language features should be used only when the
needed operation or function cannot reasonably be implemented with the
standard features alone. Although nonstandard language features can be
very useful, it should be recognized that their use may make the
interchange of programs and future conversion to a revised standard or
replacement processor more difficult and costly.
d. It is recognized that programmatic requirements may be more
economically and efficiently satisfied through the use of report
generation, database management, or text processing languages. The use
of any facility should be considered in the context of system life,
system cost, data integrity, and the potential for data sharing.
e. Programmatic requirements may be also more economically and
efficiently satisfied by the use of automatic program generators.
However, if the final output of a program generator is a COBOL source
program, then the resulting program should conform to the conditions
and specifications of FIPS COBOL.
f. When it is determined that a programming language that has been
adopted as a FIPS is to be used for an application or program, a
processor conforming to the FIPS programming language shall be used, if
available. It is not intended that existing programs be rewritten
solely for the purpose of conforming to a FIPS programming language. If
a program is to be part of an existing application written in a
programming language not conforming to a FIPS, the language processor
used for the existing application may be used for the new program.
10. Specifications. FIPS COBOL specifications are the same as
American National Standard COBOL as specified in ANSI X3.23-1985, ANSI
X3.23a-1989 and ANSI X3.23b-1993.
ANSI X3.23-1985, ANSI X3.23a-1989 and ANSI X3.23a-1993 specify the
form of a program written in COBOL, formats for data, and rules for
program and data interpretation.
The standards do not specify limits on the size of programs,
minimum system requirements, the means of supervisory control of
programs, or the means of transforming programs internally for
processing.
In addition, the following requirements apply:
a. For purposes of FIPS COBOL, the modules defined in ANSI X3.23-
1985 and ANSI X3.23a-1989 are combined into three subsets and four
optional modules. The three subsets are identified as Minimum,
Intermediate, and High. The four optional modules are Report Writer,
Communication, Debug, and Segmentation. These four optional modules may
be associated with any of the subsets.
The high subset is composed of all language elements of the highest
level of all required modules. The intermediate subset is composed of
all language elements of level 1 of all required modules except the
Intrinsic Function module. The minimum subset is composed of all
language elements of level 1 of the Nucleus, Sequential I-O, and Inter-
Program Communication modules.
The following table reflects the composition of the required
subsets and the relationship of the subsets and the optional modules.
The numbers in the table refer to the level within a module as
designated in ANSI X3.23-1985 and ANSI X3.23A-1989, and a dash denotes
the corresponding module is omitted or may be omitted.
----------------------------------------------------------------------------------------------------------------
COBOL subsets
Modules -----------------------------------------------------
Minimum Intermediate High
----------------------------------------------------------------------------------------------------------------
Required:
Nucleus............................................... 1 1 2.
Sequential I-O........................................ 1 1 2.
Relative I-O.......................................... - 1 2.
Indexed I-O........................................... - 1 2.
Inter-Program Communication........................... 1 1 2.
Sort-Merge............................................ - 1 1.
Source Text Manipulation.............................. - 1 2.
Intrinsic Function.................................... - - 1.
Optional:
Report Writer......................................... -, or 1 -, or 1 -, or 1.
Communication......................................... -, 1, or 2 -, 1, or 2 -, 1, or 2.
Debug................................................. -, 1, or 2 -, 1, or 2 -, 1, or 2.
Segmentation.......................................... -, 1, or 2 -, 1, or 2 -, 1, or 2.
----------------------------------------------------------------------------------------------------------------
b. A facility must be available in the processor for the user to
optionally specify monitoring of the source program at compile time.
The monitoring may be specified for a FIPS COBOL subset, for any of the
optional modules, for all of the obsolete language elements included in
the processor, or for a combination of a FIPS COBOL subset, optional
modules, and all obsolete elements. The monitoring may be specified for
any FIPS COBOL subset at or below the highest subset for which the
processor is implemented and for a level of an optional module at or
below the level of the optional module for which the processor is
implemented. The monitoring is an analysis of the syntax used in the
source program against the syntax included in the user selected FIPS
COBOL subset and optional modules. Any syntax used in the source
program that does not conform to that included in the user selected
FIPS COBOL subset and optional modules will be diagnosed and identified
to the user through a message on the source program listing. Any syntax
for an obsolete language element included in the processor and used in
the source program will also be diagnosed and identified through a
message on the source program listing. The determination of the need to
flag any given source program syntax in accordance with these
requirements cannot be logically resolved until the syntactic
correctness of the source program has been established. The message
provided will identify:
--The level indicator, clause, statement or header that directly
contains the nonconforming or obsolete syntax. (For the purpose of this
requirement the definitions of level indicator, clause, statement and
header contained in American National Standard COBOL, ANSI X3.23-1985,
Section III, Glossary, and the definition of syntax contained in
American National Dictionary for Information Processing Systems,
(ANDIS), ANSI X3.172-1990, apply.)
--The source program line and an indication of the beginning location
within the line of the level indicator, clause, statement or header
which contains the nonconforming or obsolete syntax.
--The syntax as ``nonconforming standard'' if the nonconforming syntax
is included in the processor but is not within the user selected FIPS
COBOL subset or optional modules unless monitoring is selected for the
obsolete category; in that case obsolete language elements are only
flagged as ``obsolete''.
--The syntax as ``nonconforming nonstandard'' if the nonconforming
syntax is a nonstandard extension included in the processor.
--The syntax as ``obsolete'' if the syntax identified is in the
obsolete category within a FIPS COBOL subset or optional module
included in the processor.
11. Implementation. The implementation of FIPS COBOL involves three
areas of consideration: acquisition of COBOL processors, interpretation
of FIPS COBOL, and validation of COBOL processors.
11.1 Acquisition of COBOL Processors. This publication is
effective [insert a date 90 days after the approval date]. COBOL
processors acquired for Federal use after this date should implement at
least one of the required subsets of FIPS COBOL. If the functionality
of one or more of the optional modules meets programmatic requirements,
then those optional modules also should be acquired. Each optional
module that is needed to meet programmatic requirements should be
explicitly cited as a requirement in the order for the processor.
Conformance to FIPS COBOL should be considered whether COBOL processors
are developed internally, acquired as part of an ADP system
procurement, acquired by separate procurement, used under an ADP
leasing arrangement, or specified for use in contracts for programming
services.
A transition period provides time for industry to produce COBOL
processors conforming to the standard. The transition period begins on
the effective date and continues for one (1) year thereafter. The
following apply during the transition period:
a. The provisions of FIPS PUB 21-3 apply to processors ordered
before the effective date but delivered subsequent to the effective
date.
b. The provisions of this publication apply to orders placed after
the effective date; however, a processor conforming to FIPS PUB 21-4,
if available, may be acquired for use prior to the effective date. If a
conforming processor is not available, a processor conforming to FIPS
PUB 21-3 may be acquired for interim use during the transition period.
11.2 Interpretation of FIPS COBOL. NIST provides for the
resolution of questions regarding FIPS COBOL specifications and
requirements, and issues official interpretations as needed. All
questions about the interpretation of FIPS COBOL should be addressed
to: National Institute of Standards and Technology, Attn: COBOL
Interpretation, Technology Building, Room B-154, Gaithersburg, MD
20899.
11.3 Validation of COBOL Processors. NIST provides a service for
the purpose of validating the conformance to this standard of
processors offered for Federal procurement. The validation system
reports the nature of any deviations that are detected. This service is
offered on a reimbursable basis. Further information about the
validation service can be obtained from the Software Standards
Validation Group, COBOL Validation, National Institute of Standards and
Technology, Gaithersburg, MD 20899 (301) 975-3247.
12. Waivers. Under certain exceptional circumstances, the heads of
Federal departments and agencies may approve waivers to Federal
Information Processing Standards (FIPS). The head of such agency may
redelegate such authority only to a senior official designated pursuant
to section 3506(b) of Title 44, United States Code. Waivers shall be
granted only when:
a. Compliance with a standard would adversely affect the
accomplishment of the mission of an operator of a Federal computer
system, or
b. Cause a major adverse financial impact on the operator which is
not offset by Government-wide savings.
Agency heads may act upon a written waiver request containing the
information detailed above. Agency heads may also act without a written
waiver request when they determine that conditions for meeting the
standard cannot be met. Agency heads may approve waivers only by a
written decision which explains the basis on which the agency head made
the required finding(s). A copy of each such decision, with
procurement-sensitive or classified portions clearly identified, shall
be sent to: National Institute of Standards and Technology; ATTN: FIPS
Waiver Decisions, Technology Building, Room B-154; Gaithersburg, MD
20899.
In addition notice of each waiver granted and each delegation of
authority to approve waivers shall be sent promptly to the Committee on
Government Operations of the House of Representatives and the Committee
on Governmental Affairs of the Senate and shall be published promptly
in the Federal Register.
When the determination on a waiver applies to the procurement of
equipment and/or services, a notice of the waiver determination must be
published in the Commerce Business Daily as a part of the notice of
solicitation for offers of an acquisition or, if the waiver
determination is made after that notice is published, by amendment to
such notice.
A copy of the waiver, any supporting documents, the document
approving the waiver and any supporting and accompanying documents,
with such deletions as the agency is authorized and decides to make
under 5 U.S.C. Sec. 552(b), shall be part of the procurement
documentation and retained by the agency.
13. Where to Obtain Copies. Copies of this publication are for sale
by the National Technical Information Service, U.S. Department of
Commerce, Springfield, VA 22161. (Sale of the included specifications
document is by arrangement with the American National Standards
Institute.) When ordering, refer to Federal Information Processing
Standards Publication 21-4 (FIPSPUB21-4), and title. Payment may be
made by check, money order, or deposit account.
[FR Doc. 94-16665 Filed 7-8-94; 8:45 am]
BILLING CODE 3510-CN-M
