[Federal Register Volume 61, Number 135 (Friday, July 12, 1996)]
[Notices]
[Pages 36764-36766]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-17779]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
[Docket No. NRTL-1-93]
Wyle Laboratories
AGENCY: Occupational Safety and Health Administration, Department of
Labor.
ACTION: Notice of Request for Expansion of Recognition as a Nationally
Recognized Testing Laboratory, and Preliminary Finding.
-----------------------------------------------------------------------
SUMMARY: This notice announces the application of Wyle Laboratories for
expansion of its recognition as a Nationally Recognized Testing
Laboratory (NRTL) under 29 CFR 1910.7, and presents the Agency's
preliminary finding.
DATES: The last date for interested parties to submit comments is
September 10, 1996.
ADDRESSES: Send comments to: NRTL Recognition Program, Occupational
Safety and Health Administration, U.S. Department of Labor--Room N3653,
200 Constitution Avenue, NW, Washington, D.C. 20210.
FOR FURTHER INFORMATION CONTACT: Office of Variance Determination, NRTL
Recognition Program, Occupational Safety and Health Administration,
U.S. Department of Labor, 200 Constitution Avenue, NW., Room N3653,
Washington, D.C. 20210.
SUPPLEMENTARY INFORMATION: Notice is hereby given that Wyle
Laboratories (WL), which previously made application pursuant to
section 6(b) of the Occupational Safety and Health Act of 1970, (84
Stat. 1593, 29 U.S.C. 655), Secretary of Labor's Order No. 1-90 (55 FR
9033), and 29 CFR 1910.7, for recognition as a Nationally Recognized
Testing Laboratory (see 59 FR 783, 1/6/94), and was so recognized (see
59 FR 37509, 7/22/94), has made application for expansion of its
recognition as a Nationally Recognized Testing Laboratory, for the
programs and procedures, and the equipment or materials, listed below.
The address of the laboratory covered by this application is: Wyle
Laboratories, 7800 Highway 20 West, Huntsville, Alabama 35807.
Expansion of Recognition
On September 15, 1995, Wyle Laboratories made application for
expansion of its recognition as a Nationally Recognized Testing
Laboratory in the following areas:
Expansion of Recognition--Programs and Procedures
Based upon the conditions as detailed in the Federal Register
document titled, ``Nationally Recognized Testing Laboratories;
Clarification of the Types of Programs and Procedures'', 60 FR 12980,
3/9/95, WL applied for recognition for the following programs and
procedures:
1. Acceptance of testing data from independent organizations, other
than NRTLs.
2. Acceptance of product evaluations from independent
organizations, other than NRTLs.
3. Acceptance of witnessed testing data.
4. Acceptance of testing data from non-independent organizations.
5. Acceptance of evaluation data from non-independent organizations
(requiring NRTL review prior to marketing).
6. Acceptance of continued certification following minor
modifications by the client.
7. Acceptance of product evaluations from organizations that
function as part of the International Electrotechnical Commission
Certification Body (IEC-CB) Scheme.
8. Acceptance of services other than testing of evaluation
performed by subcontractors or agents.
Expansion of Recognition--Test Standards
WL also requested expansion of its NRTL recognition for testing and
certification of products when tested for compliance with the following
test standards, which are appropriate within the meaning of 29 CFR
1910.7(c):
ANSI/UL 8--Foam Fire Extinguishers
ANSI/UL 20--General--Use Snap Switches
ANSI/UL 22--Amusement and Gaming Machines
ANSI/UL 44--Rubber-Insulated Wires and Cables
ANSI/UL 45--Portable Electric Tools
ANSI/UL 48--Electric Signs
ANSI/UL 62--Flexible Cord and Fixture Wire
ANSI/UL 65--Electric Wired Cabinets
ANSI/UL 67--Electric Panelboards
ANSI/UL 73--Electric-Motor-Operated Appliances
ANSI/UL 83--Thermoplastic-Insulated Wires and Cables
ANSI/UL 92--Fire Extinguisher and Booster Hose
UL 98--Enclosed and Dead-Front Switches
ANSI/UL 154--Carbon Dioxide Fire Extinguishers
ANSI/UL 198B--Class H Fuses
ANSI/UL 198C--High-Interrupting-Capacity Fuses, Current Limiting Type
ANSI/UL 198D--High-Interrupting-Capacity Class K Fuses
ANSI/UL 198E--Class R Fuses
ANSI/UL 198F--Plug Fuses
[[Page 36765]]
ANSI/UL 198G--Fuse for Supplementary Overcurrent Protection
ANSI/UL 198H--Class T Fuses
ANSI/UL 198L--DC Fuses for Industrial Use
ANSI/UL 244A--Solid-State Controls for Appliances
ANSI/UL 299--Dry Chemical Fire Extinguishers
ANSI/UL 363--Knife Switches
ANSI/UL 393--Indicating Pressure Gauges for Fire Protection Service
ANSI/UL 429--Electrically Operated Valves
UL 444--Communications Cables
ANSI/UL 466--Electric Scales
ANSI/UL 467--Electrical Grounding and Bonding Equipment
ANSI/UL 486B--Wire Connectors for Use with Aluminum Conductors
ANSI/UL 486C--Splicing Wire Connectors
ANSI/UL 486D--Insulated Wire Connectors for Use With Underground
Conductors
UL 497A--Secondary Protectors for Communication Circuits
ANSI/UL 498--Attachment Plugs and Receptacles
ANSI/UL 507--Electric Fans
ANSI/UL 510--Insulating Tape
ANSI/UL 512--Fuseholders
ANSI/UL 539--Single and Multiple Station Heat Detectors
ANSI/UL 541--Refrigerated Vending Machines
ANSI/UL 547--Thermal Protectors for Electric Motors
ANSI/UL 626--2\1/2\ Gallon Stored Pressure Water Type Fire
Extinguishers
ANSI/UL 711--Rating and Fire Testing of Fire Extinguishers
ANSI/UL 796--Printed-Wiring Boards
ANSI/UL 813--Commercial Audio Equipment
ANSI/UL 817--Cord Sets and Power-Supply Cords
ANSI/UL 845--Electric Motor Control Centers
ANSI/UL 854--Service Entrance Cable
ANSI/UL 863--Electric Time-Indicating and -Recording Appliances
ANSI/UL 877--Circuit Breakers and Circuit-Breaker Enclosure for Use in
Hazardous (Classified) Locations
ANSI/UL 894--Switches for Use in Hazardous (Classified) Locations
ANSI/UL 916--Energy Management Equipment
ANSI/UL 917--Clock-Operated Switches
ANSI/UL 924--Emergency Lighting and Power Equipment
ANSI/UL 943--Ground-Fault Circuit Interrupters
ANSI/UL 961--Hobby and Sports Equipment
ANSI/UL 9677--Fused Power-Circuit Devices
ANSI/UL 998--Humidifiers
ANSI/UL 1004--Electric Motors
ANSI/UL 1008--Automatic Transfer Switches
ANSI/UL 1018--Electric Aquarium Equipment
UL 1022--Line Isolated Monitors
ANSI/UL 1028--Electric Hair-Clipping and -Shaving Appliances
UL 1047--Isolated Power Systems Equipment
ANSI/UL 1053--Ground-Fault Sensing and Relaying Equipment
ANSI/UL 1054--Special-Use Switches
ANSI/UL 1058--Halogenated Agent Extinguishing System Units
UL 1059--Terminal Blocks
UL 1066--Low-Voltage AC and DC power Circuit Breakers Used in
Enclosures
ANSI/UL 1077--Supplementary Protectors for Use in Electrical Equipment
ANSI/UL 1091--Butterfly Valves for Fire Protection Service
ANSI/UL 1093--Halogenated Agent Fire Extinguishers
ANSI/UL 1096--Electric Central Air-Heating Equipment
ANSI/UL 1097--Double Insulation Systems for Use in Electrical Equipment
UL 1254--Pre-Engineered Dry Chemical Extinguishing System Units
ANSI/UL 1283--Electromagnetic-Interference Filter
ANSI/UL 1412--Fusing Resistors and Temperature-Limited Resistors for
Radio-, and Television-Type Appliances
ANSI/UL 1416--Overcurrent and Overtemperature Protectors for Radio- and
Television-Type Appliances
UL 1424--Cables for Power-Limited Fire-Protective-Signaling Circuits
ANSI/UL 1429--Pullout Switches
UL 1437--Electric Analog Instruments, Panelboard Types
UL 1449--Transient Voltage Surge Suppressors
ANSI/UL 1474--Adjustable Drop Nipples for Sprinkler Systems
ANSI/UL 1481--Power Supplies for Fire Protective Signaling Systems
UL 1486--Quick Opening Devices for Dry Pipe Valves for Fire-Protection
Service
ANSI/UL 1557--Electrically Isolated Semiconductor Devices
ANSI/UL 1564--Industrial Battery Chargers
ANSI/UL 1577--Optical Isolators
UL 1604--Electrical Equipment for Use in Class I and II, Division 2 and
Class III Hazardous (Classified) Locations
ANSI/UL 1624--Light Industrial and Fixed Electric Tools
ANSI/UL 1664--Immersion-Detection Circuit-Interrupters
UL 1673--Electric Space Heating Cables
UL 1682--Plugs, Receptacles, and Cable Connectors, of the Pin and
Sleeve Type
ANSI/UL 1876--Isolating Signal and Feedback Transformers for Use in
Electronic Equipment
UL 1995--Heating and Cooling Equipment
UL 2006--Halon 1211 Recovery/Recharge Equipment
The NRTL Recognition Program staff made an in-depth study of the
details of WL's original application for recognition and the on-site
assessment and determined that an additional on-site visit was not
necessary. The programs and procedures for which Wyle Laboratories has
requested accreditation are the type that have been utilized previously
in their nuclear and defense area programs, and controls have already
been established. With respect to the test standards for which WL has
requested, all but those pertaining to fire extinguishment and
protection equipment are similar to the standards for which it has
already been accredited and are, therefore, within the recognized
capabilities of its personnel, facilities and equipment. Regarding the
fire extinguishment and equipment protection standards, Wyle has tested
at least four products in each of 16 of the 18 standards requested. The
general knowledge that WL has acquired in the performance of those
tests, and the test equipment and personnel on the site, would indicate
that it has the capability to test and certify products under these
standards.
In any event, at the next scheduled audit a judgement will be made
of the adequacy of the controls for the scope of activities involved in
the NRTL program as well as of the status of the facility, equipment,
and personnel.
Preliminary Finding
Based upon a review of the completed application file and the
recommendation of the staff, the Assistant Secretary has made a
preliminary finding that the Wyle Laboratories facility for which
expansion of its recognition was requested (Huntsville, Alabama) can
meet the requirements as prescribed by 29 CFR 1910.7.
All interested members of the public are invited to supply detailed
reasons and evidence supporting or challenging the sufficiency of the
applicant's having met the requirements for expansion of its
recognition as a Nationally Recognized Testing Laboratory, as required
by 29 CFR 1910.7 and
[[Page 36766]]
Appendix A to 29 CFR 1910.7. Submission of pertinent written documents
and exhibits shall be made no later than September 10, 1996, and must
be addressed to the NRTL Recognition Program, Office of Variance
Determination, Room N 3653, Occupational Safety and Health
Administration, U.S. Department of Labor, 200 Constitution Avenue, NW.,
Washington, D.C. 20210. Copies of the WL application, the laboratory
survey reports, and all submitted comments, as received, (Docket No.
NRTL-1-93), are available for inspection and duplication at the Docket
Office, Room N 2634, Occupational Safety and Health Administration,
U.S. Department of Labor, at the above address.
The Assistant Secretary's final decision on whether the applicant
(Wyle Laboratories) satisfies the requirements for expansion of its
recognition as an NRTL will be made on the basis of the entire record
including the public submissions and any further proceedings that the
Assistant Secretary may consider appropriate in accordance with
Appendix A to Section 1910.7.
Signed at Washington, D.C. this 8th day of July, 1996.
Joseph A. Dear,
Assistant Secretary.
[FR Doc. 96-17779 Filed 7-11-96; 8:45 am]
BILLING CODE 4510-26-M
