E8-16072. Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance  

  • Start Preamble

    In accordance with Section 223 of the Trade Act of 1974, as amended (19 U.S.C. 2273) the Department of Labor herein presents summaries of determinations regarding eligibility to apply for trade adjustment assistance for workers (TA-W) number and alternative trade adjustment assistance (ATAA) by (TA-W) number issued during the period of June 23 through June 27, 2008.

    In order for an affirmative determination to be made for workers of a primary firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(a) of the Act must be met.

    I. Section (a)(2)(A) all of the following must be satisfied:

    A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially Start Printed Page 40619separated, or are threatened to become totally or partially separated;

    B. the sales or production, or both, of such firm or subdivision have decreased absolutely; and

    C. increased imports of articles like or directly competitive with articles produced by such firm or subdivision have contributed importantly to such workers' separation or threat of separation and to the decline in sales or production of such firm or subdivision; or

    II. Section (a)(2)(B) both of the following must be satisfied:

    A. A significant number or proportion of the workers in such workers' firm, or an appropriate subdivision of the firm, have become totally or partially separated, or are threatened to become totally or partially separated;

    B. there has been a shift in production by such workers' firm or subdivision to a foreign country of articles like or directly competitive with articles which are produced by such firm or subdivision; and

    C. One of the following must be satisfied:

    1. The country to which the workers' firm has shifted production of the articles is a party to a free trade agreement with the United States;

    2. the country to which the workers' firm has shifted production of the articles to a beneficiary country under the Andean Trade Preference Act, African Growth and Opportunity Act, or the Caribbean Basin Economic Recovery Act; or

    3. there has been or is likely to be an increase in imports of articles that are like or directly competitive with articles which are or were produced by such firm or subdivision.

    Also, in order for an affirmative determination to be made for secondarily affected workers of a firm and a certification issued regarding eligibility to apply for worker adjustment assistance, each of the group eligibility requirements of Section 222(b) of the Act must be met.

    (1) Significant number or proportion of the workers in the workers' firm or an appropriate subdivision of the firm have become totally or partially separated, or are threatened to become totally or partially separated;

    (2) the workers' firm (or subdivision) is a supplier or downstream producer to a firm (or subdivision) that employed a group of workers who received a certification of eligibility to apply for trade adjustment assistance benefits and such supply or production is related to the article that was the basis for such certification; and

    (3) either—

    (A) the workers' firm is a supplier and the component parts it supplied for the firm (or subdivision) described in paragraph (2) accounted for at least 20 percent of the production or sales of the workers' firm; or

    (B) a loss or business by the workers' firm with the firm (or subdivision) described in paragraph (2) contributed importantly to the workers' separation or threat of separation.

    In order for the Division of Trade Adjustment Assistance to issue a certification of eligibility to apply for Alternative Trade Adjustment Assistance (ATAA) for older workers, the group eligibility requirements of Section 246(a)(3)(A)(ii) of the Trade Act must be met.

    1. Whether a significant number of workers in the workers' firm are 50 years of age or older.

    2. Whether the workers in the workers' firm possess skills that are not easily transferable.

    3. The competitive conditions within the workers' industry (i.e., conditions within the industry are adverse).

    Affirmative Determinations for Worker Adjustment Assistance

    The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

    The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) of the Trade Act have been met.

    None.

    The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) of the Trade Act have been met.

    TA-W-63,579; Alcatel-Lucent, Direct Fulfillment Team, Oklahoma City, OK: June 13, 2007.

    The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) of the Trade Act have been met.

    None.

    The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) of the Trade Act have been met.

    None.

    Affirmative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

    The following certifications have been issued. The date following the company name and location of each determination references the impact date for all workers of such determination.

    The following certifications have been issued. The requirements of Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

    TA-W-63,385; Cadence Innovation, LLC, Headquarters Div., Michigan Staffing, Modern Eng., National Technical, Troy, MI: May 12, 2007.

    TA-W-63,472; Sandberg and Sikorski Corp., New York, NY: May 29, 2007.

    TA-W-63,488; Schweitzer-Mauduit International, Inc., Lee Mills Division, Lee, MA: August 5, 2008.

    TA-W-62,882; Glaxosmithkline, Bristol, TN: April 9, 2007.

    TA-W-63,303; Hermetic Seal Corp, Division of Ametek HCC Industries, El Monte, CA: April 15, 2007.

    TA-W-63,303A; Hermetic Seal Corp, Division of Ametek HCC Industries, Rosemead, CA: April 15, 2007.

    TA-W-63,308; Sumitomo Bakelite North America, Inc., Manchester, CT: May 2, 2007.

    TA-W-63,343; Taylor King, Inc., Taylorsville, NC: May 7, 2007.

    TA-W-63,419; Ansonia Copper and Brass, Inc., Ansonia Division, Ansonia, CT: December 7, 2007.

    TA-W-62,801; Taylormade-Adidas Golf Co, Industrial Plastics, Adecco, Westminister, SC: March 2, 2007.

    TA-W-63,550; Pazvenu Apparel, Inc., New York, NY: June 1, 2007.

    TA-W-63,570; Blue Angel's Fashion, Inc., San Francisco, CA: June 20, 2007.

    The following certifications have been issued. The requirements of Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

    TA-W-63,325; Schott North America, Inc., Auburn, NY: May 2, 2007.

    TA-W-63,335; Bauman Springs USA, Inc., Paradigm Personnel, Labor Ready, Pineville, NC: April 18, 2007.

    TA-W-63,354; JBL Incorporated, Division of Harman International, Inc., Northridge, CA: April 9, 2007.

    TA-W-63,387; Todco, Div. of Overhead Door Corp., Placement Pros, Fresno, CA: May 14, 2007.

    TA-W-63,394; Serigraph, Inc., Seek, Adecco, OPS and Site, West Bend, WI: May 13, 2007.

    TA-W-63,400; Gateway, Inc., North Sioux City, SD: May 14, 2007. Start Printed Page 40620

    TA-W-63,400A; Gateway, Inc., Irvine Center Drive Facility, Irvine, CA: May 14, 2007.

    TA-W-63,400B; Gateway, Inc., Myford Road Facility, Irvine, CA: May 14, 2007.

    TA-W-63,429; BorgWarner, Transmission Systems Division, Aerotek, Frankfort, IL: October 7, 2007.

    TA-W-63,475; Biosense Webster, A Div. of Johnson & Johnson, Kelly Services, Irwindale, CA: June 3, 2007.

    TA-W-63,476; Indalex, Inc., Modesto, CA: June 4, 2007.

    TA-W-63,484; Paul Winston Eurostar, LLC, New York, NY: May 23, 2007.

    TA-W-63,490; Tenneco, Inc., Clevite-Pullman Division, Milan, OH: June 4, 2007.

    TA-W-63,504; Kongsberg Automotive, Inc., Interior Systems Division, Willis, TX: June 5, 2007.

    TA-W-63,510; Plastech Engineered Products, Manpower, Kenton, TN: June 6, 2007.

    TA-W-63,514; Plastech Engineered Products, Inc., Elwood, IN: June 5, 2007.

    TA-W-63,522; Brockway Mould, Inc., Brockport, PA: June 20, 2008.

    TA-W-63,558; Park Shirt Company, Inc., Jamestown, TN: June 17, 2007.

    TA-W-63,059; Springs Global, Griffin Finishing Division, Servsource, Griffin, GA: March 24, 2007.

    TA-W-63,528; Callaway Golf Ball Operations, Inc., Callaway Golf, BTS Staffing, Accustaff, Johnstown, NY: June 6, 2007.

    TA-W-63,544; ITW Alma, Illinois Tool Works, Global Employment, Auto Personnel, Kennesaw, GA: June 16, 2007.

    TA-W-63,551; Culp, Inc., Culp Weaving Division, Graham, NC: April 5, 2008.

    The following certifications have been issued. The requirements of Section 222(b) (supplier to a firm whose workers are certified eligible to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

    None.

    The following certifications have been issued. The requirements of Section 222(b) (downstream producer for a firm whose workers are certified eligible to apply for TAA based on increased imports from or a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii) of the Trade Act have been met.

    TA-W-63,473; Whyco Finishing Technologies, LLC, Thomaston, CT: June 3, 2007.

    Negative Determinations for Alternative Trade Adjustment Assistance

    In the following cases, it has been determined that the requirements of 246(a)(3)(A)(ii) have not been met for the reasons specified.

    The Department has determined that criterion (1) of Section 246 has not been met. The firm does not have a significant number of workers 50 years of age or older.

    TA-W-63,579; Alcatel-Lucent, Direct Fulfillment Team, Oklahoma City, OK.

    The Department has determined that criterion (2) of Section 246 has not been met. Workers at the firm possess skills that are easily transferable.

    None.

    The Department has determined that criterion (3) of Section 246 has not been met. Competition conditions within the workers' industry are not adverse.

    None.

    Negative Determinations for Worker Adjustment Assistance and Alternative Trade Adjustment Assistance

    In the following cases, the investigation revealed that the eligibility criteria for worker adjustment assistance have not been met for the reasons specified.

    Because the workers of the firm are not eligible to apply for TAA, the workers cannot be certified eligible for ATAA.

    The investigation revealed that criteria (a)(2)(A)(I.A.) and (a)(2)(B)(II.A.) (employment decline) have not been met.

    TA-W-63,364; Domtar A.W. Corporation, U.S. Pulp and Paper Division, Nekoosa, WI.

    TA-W-63,440; Magline, Inc., Pinconning, MI.

    TA-W-63,559; Shieldalloy Metallurgical Corporation, Newfield, NJ.

    The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

    TA-W-63,406; Cocomo Apparel, Inc, Vernon, CA.

    TA-W-63,409; Twigg Corporation, Martinsville, IN.

    TA-W-63,471; Appleton Coated LLC, Combined Locks, WI.

    The investigation revealed that criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met.

    TA-W-62,612; Buckhorn, Inc., Dawson Springs, KY.

    TA-W-62,720; PGM-Fermentation West Plant, Division of Pfizer Global Manufacturing, Portage, MI.

    TA-W-62,901; Georgia Pacific Corrugated LLC, Packaging Division, Franklin, MA.

    TA-W-63,012; Building Materials Corporation of America, DBA GAF Materials Corporation, Millis, MA.

    TA-W-63,024; West Pharmaceutical Services, Tech Group Erie Tool Shop, Erie, PA.

    TA-W-63,264; Kenworth Truck Company, Chillicothe, OH.

    TA-W-63,397; Skyline Corporation, Bossier City, LA.

    TA-W-63,447; West Fraser, Inc., Leola Lumber Mill, Leola, AR.

    TA-W-63,329; Maple Leaf Farms, Inc., Franksville, WI.

    The workers' firm does not produce an article as required for certification under Section 222 of the Trade Act of 1974.

    TA-W-63,375; Boston Coach Corporation, Everett Call Center, Everett, MA.

    TA-W-63,524; Tennessee Orthopaedic Alliance, Nashville, TN.

    TA-W-63,580; Credit Payment Services, Inc., Reno, NV.

    The investigation revealed that criteria of Section 222(b)(2) has not been met. The workers' firm (or subdivision) is not a supplier to or a downstream producer for a firm whose workers were certified eligible to apply for TAA.

    None.

    I hereby certify that the aforementioned determinations were issued during the period of June 23 through June 27, 2008. Copies of these determinations are available for inspection in Room C-5311, U.S. Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210 during normal business hours or will be mailed to persons who write to the above address.

    Start Signature

    Dated: July 7, 2008.

    Linda G. Poole,

    Certifying Officer, Division of Trade Adjustment Assistance.

    End Signature End Preamble

    [FR Doc. E8-16072 Filed 7-14-08; 8:45 am]

    BILLING CODE 4510-FN-P

Document Information

Published:
07/15/2008
Department:
Employment and Training Administration
Entry Type:
Notice
Document Number:
E8-16072
Pages:
40618-40620 (3 pages)
PDF File:
e8-16072.pdf