2024-15604. Certain Low Speed Personal Transportation Vehicles From the People's Republic of China: Initiation of Less-Than-Fair-Value Investigation

Document Headings

Document headings vary by document type but may contain the following:

1. the agency or agencies that issued and signed a document
2. the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
3. the agency docket number / agency internal file number
4. the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions

See the Document Drafting Handbook for more details.

Department of Commerce

International Trade Administration

1. [A-570-176]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

DATES:

Applicable July 10, 2024.

FOR FURTHER INFORMATION CONTACT:

Gorden Struck or Jerry Xiao, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone] or [phone], respectively.

SUPPLEMENTARY INFORMATION:

The Petition

On June 20, 2024, the U.S. Department of Commerce (Commerce) received an antidumping duty (AD) petition concerning imports of certain low speed personal transportation vehicles (LSPTVs) from the People's Republic of China (China) filed in proper form on behalf of the American Personal Transportation Vehicle Manufacturers Coalition (the petitioner).^[1] The AD Petition was accompanied by a countervailing duty (CVD) petition concerning imports of LSPTVs from China.^[2]

Between June 24 and July 8, 2024, Commerce requested supplemental information pertaining to certain aspects of the Petition in supplemental questionnaires.^[3] The petitioner responded to Commerce's supplemental questionnaires between June 28 and July 9, 2024.^[4]

In accordance with section 732(b) of the Tariff Act of 1930, as amended (the Act), the petitioner alleges that imports of LSPTVs from China are being, or are likely to be, sold in the United States at less than fair value (LTFV) within the meaning of section 731 of the Act, and that imports of such products are materially injuring, or threatening material injury to, the LSPTVs industry in the United States. Consistent with section 732(b)(1) of the Act, the Petition was accompanied by information reasonably available to the petitioner supporting its allegations.

Commerce finds that the petitioner filed the Petition on behalf of the domestic industry, because the petitioner is an interested party, as defined in sections 771(9)(C) and (E) of the Act.^[5] Commerce also finds that the petitioner demonstrated sufficient industry support for the initiation of the requested LTFV investigation.^[6]

Period of Investigation

Because the Petition was filed on June 20, 2024, and because China is a non-market economy (NME) country, pursuant to 19 CFR 351.204(b)(1), the period of investigation (POI) for this China LTFV investigation is October 1, 2023, through March 31, 2024.

Scope of the Investigation

The products covered by this investigation are LSPTVs from China. For a full description of the scope of this investigation, see the appendix to this notice.

Comments on the Scope of the Investigation

Between June 24 and July 8, 2024, Commerce requested information and clarification from the petitioner regarding the proposed scope to ensure that the scope language in the Petition is an accurate reflection of the products for which the domestic industry is seeking relief.^[7] Between June 28 and July 9, 2024, the petitioner provided clarifications and revised the scope.^[8] The description of merchandise covered by this investigation, as described in the appendix to this notice, reflects these clarifications.

As discussed in the Preamble to Commerce's regulations, we are setting aside a period for interested parties to raise issues regarding product coverage ( i.e., scope).^[9] Commerce will consider all scope comments received from interested parties and, if necessary, will consult with interested parties prior to the issuance of the preliminary determination. If scope comments include factual information,^[10] all such factual information should be limited to public information. To facilitate preparation of its questionnaires, Commerce requests that scope comments be submitted by 5:00 p.m. Eastern Time (ET) on July 30, 2024, which is 20 calendar days from the signature date of this notice.^[11] Any rebuttal comments, which may include factual information, and should also be limited to public information, must be filed by 5:00 p.m. ET on August 9, 2024, which is 10 calendar days from the initial comment deadline.^[12]

Commerce requests that any factual information that parties consider relevant to the scope of this investigation be submitted during that period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party must contact Commerce and request permission to submit the additional information. All scope comments must be filed simultaneously on the records of the concurrent LTFV and CVD investigations.

Filing Requirements

All submissions to Commerce must be filed electronically via Enforcement and Compliance's Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS), unless an exception applies.^[13] An electronically filed document must be received successfully in its entirety by the time and date it is due.

Comments on Product Characteristics

Commerce is providing interested parties with an opportunity to comment on the appropriate physical characteristics of LSPTVs to be reported in response to Commerce's AD questionnaires. This information will be used to identify the key physical characteristics of the subject merchandise in order to report the relevant factors of production (FOP) accurately, as well as to develop appropriate product comparison criteria.

Interested parties may provide any information or comments that they feel are relevant to the development of an accurate list of physical characteristics. In order to consider the suggestions of interested parties in developing and issuing the AD questionnaire, all product characteristics comments must be filed by 5:00 p.m. ET on July 30, 2024, which is 20 calendar days from the signature date of this notice.^[14] Any rebuttal comments must be filed by 5:00 p.m. ET on August 9, 2024, which is 10 calendar days from the initial comment deadline. All comments and submissions to Commerce must be filed electronically using ACCESS, as explained above, on the record of the LTFV investigation.

Determination of Industry Support for the Petition

Section 732(b)(1) of the Act requires that a petition be filed on behalf of the domestic industry. Section 732(c)(4)(A) of the Act provides that a petition meets this requirement if the domestic producers or workers who support the petition account for: (i) at least 25 percent of the total production of the domestic like product; and (ii) more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the petition. Moreover, section 732(c)(4)(D) of the Act provides that, if the petition does not establish support of domestic producers or workers accounting for more than 50 percent of the total production of the domestic like product, Commerce shall: (i) poll the industry or rely on other information in order to determine if there is support for the petition, as required by subparagraph (A); or (ii) determine industry support using a statistically valid sampling method to poll the “industry.”

Section 771(4)(A) of the Act defines the “industry” as the producers as a whole of a domestic like product. Thus, to determine whether a petition has the requisite industry support, the statute directs Commerce to look to producers and workers who produce the domestic like product. The U.S. International Trade Commission (ITC), which is responsible for determining whether “the domestic industry” has been injured, must also determine what constitutes a domestic like product in order to define the industry. While both Commerce and the ITC must apply the same statutory definition regarding the domestic like product,^[15] they do so for different purposes and pursuant to a separate and distinct authority. In addition, Commerce's determination is subject to limitations of time and information. Although this may result in different definitions of the like product, such differences do not render the decision of either agency contrary to law.^[16]

Section 771(10) of the Act defines the domestic like product as “a product which is like, or in the absence of like, most similar in characteristics and uses with, the article subject to an investigation under this title.” Thus, the reference point from which the domestic like product analysis begins is “the article subject to an investigation” ( i.e., the class or kind of merchandise to be investigated, which normally will be the scope as defined in the petition).

With regard to the domestic like product, the petitioner does not offer a definition of the domestic like product distinct from the scope of the investigation.^[17] Based on our analysis of the information submitted on the record, we have determined that LSPTVs, as defined in the scope, constitute a single domestic like product, and we have analyzed industry support in terms of that domestic like product.^[18]

In determining whether the petitioner has standing under section 732(c)(4)(A) of the Act, we considered the industry support data contained in the Petition with reference to the domestic like product as defined in the “Scope of the Investigation,” in the appendix to this notice. To establish industry support, the petitioner provided its 2023 production of the domestic like product.^[19] The petitioner estimated the production of the domestic like product for the remaining U.S. producers of LSPTVs.^[20] We relied on data provided by the petitioner for purposes of measuring industry support.^[21]

Our review of the data provided in the Petition, the First General Issues Supplement, the Second General Issues Supplement, and other information readily available to Commerce indicates that the petitioner has established industry support for the Petition.^[22] First, the Petition established support from domestic producers (or workers) accounting for more than 50 percent of the total production of the domestic like product and, as such, Commerce is not required to take further action in order to evaluate industry support ( e.g., polling).^[23] Second, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(i) of the Act because the domestic producers (or workers) who support the Petition account for at least 25 percent of the total production of the domestic like product.^[24] Finally, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(ii) of the Act because the domestic producers (or workers) who support the Petition account for more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the Petition.^[25] Accordingly, Commerce determines that the Petition was filed on behalf of the domestic industry within the meaning of section 732(b)(1) of the Act.^[26]

Allegations and Evidence of Material Injury and Causation

The petitioner alleges that the U.S. industry producing the domestic like product is being materially injured, or is threatened with material injury, by reason of the imports of the subject merchandise sold at LTFV. In addition, the petitioner alleges that subject imports exceed the negligibility threshold provided for under section 771(24)(A) of the Act.^[27]

The petitioner contends that the industry's injured condition is illustrated by the significant and increasing volume of subject imports; declining market share; underselling and price depression and/or suppression; lost sales and revenues; declines in production, capacity utilization, and U.S. shipments; declines in production-related workers, hours worked, and wages paid; decline in financial performance; and the magnitude of the alleged dumping margins.^[28] We assessed the allegations and supporting evidence regarding material injury, threat of material injury, causation, as well as negligibility, and we have determined that these allegations are properly supported by adequate evidence, and meet the statutory requirements for initiation.^[29]

Allegations of Sales at LTFV

The following is a description of the allegations of sales at LTFV upon which Commerce based its decision to initiate an LTFV investigation of imports of LSPTVs from China. The sources of data for the deductions and adjustments relating to U.S. price and normal value (NV) are discussed in greater detail in the China AD Initiation Checklist.

U.S. Price

The petitioner based constructed export price (CEP) on pricing information for sales, or offers for sale, of LSPTVs produced in and exported from China.^[30] The petitioner made certain adjustments to U.S. price to calculate a net ex-factory U.S. price, where applicable.^[31]

Normal Value

Commerce considers China to be an NME country.^[32] In accordance with section 771(18)(C)(i) of the Act, any determination that a foreign country is an NME country shall remain in effect until revoked by Commerce. Therefore, we continue to treat China as an NME country for purposes of the initiation of this China LTFV investigation. Accordingly, we base NV on FOPs valued in a surrogate market economy country in accordance with section 773(c) of the Act.

The petitioner claims that Türkiye is an appropriate surrogate country for China because it is a market economy that is at a level of economic development comparable to that of China and is a significant producer of comparable merchandise.^[33] The petitioner provided publicly available information from Türkiye to value all FOPs.^[34] Based on the information provided by the petitioner, we believe it is appropriate to use Türkiye as a surrogate country for China to value all FOPs for initiation purposes.

Interested parties will have the opportunity to submit comments regarding surrogate country selection and, pursuant to 19 CFR 351.301(c)(3)(i), will be provided an opportunity to submit publicly available information to value FOPs within 30 days before the scheduled date of the preliminary determination.

Factors of Production

Because information regarding the volume of inputs consumed by Chinese producers/exporters was not reasonably available, the petitioner used product-specific consumption rates from a U.S. producer of LSPTVs as a surrogate to value Chinese manufacturers' FOPs.^[35] Additionally, the petitioner calculated factory overhead, selling, general, and administrative expenses, and profit based on the experience of a Turkish producer of comparable merchandise.^[36]

Fair Value Comparisons

Based on the data provided by the petitioner, there is reason to believe that imports of LSPTVs from China are being, or are likely to be, sold in the United States at LTFV. Based on comparisons of CEP to NV, in accordance with sections 772 and 773 of the Act, the estimated dumping margins range from 379.81 to 478.09 percent ad valorem.^[37]

Initiation of LTFV Investigation

Based upon the examination of the Petition and supplemental questionnaire responses, we find that they meet the requirements of section 732 of the Act. Therefore, we are initiating an LTFV investigation to determine whether imports of LSPTVs from China are being, or are likely to be, sold in the United States at LTFV. In accordance with section 733(b)(1)(A) of the Act and 19 CFR 351.205(b)(1), unless postponed, we will make our preliminary determination no later than 140 days after the date of this initiation.

Respondent Selection

In the Petition, the petitioners named 240 companies in China as producers and/or exporters of LSPTVs.^[38] Our standard practice for respondent selection in AD investigations involving NME countries is to select respondents based on quantity and value (Q&V) questionnaires in cases where Commerce has determined that the number of companies is large, and it cannot individually examine each company based upon its resources. Therefore, considering the number of producers and/or exporters identified in the Petition, Commerce will solicit Q&V information that can serve as a basis for selecting exporters for individual examination in the event that Commerce determines that the number is large and decides to limit the number of respondents individually examined pursuant to section 777A(c)(2) of the Act. Because there are 240 Chinese producers and/or exporters identified in the Petition, Commerce has determined that it will issue Q&V questionnaires to the largest producers and/or exporters that are identified in the U.S. Customs and Border Protection data for which there is complete address information on the record.^[39]

Commerce will post the Q&V questionnaires along with filing instructions on Commerce's website at https://www.trade.gov/​ec-adcvd-case-announcements. Producers/exporters of LSPTVs from China that do not receive Q&V questionnaires may still submit a response to the Q&V questionnaire and can obtain a copy of the Q&V questionnaire from Commerce's website. Responses to the Q&V questionnaire must be submitted by the relevant Chinese producers/exporters no later than 5:00 p.m. ET on July 24, 2024, which is two weeks from the signature date of this notice. All Q&V questionnaire responses must be filed electronically via ACCESS. An electronically filed document must be received successfully, in its entirety, by ACCESS no later than 5:00 p.m. ET on the deadline noted above.

Interested parties must submit applications for disclosure under administrative protective order (APO) in accordance with 19 CFR 351.305(b). As stated above, instructions for filing such applications may be found on Commerce's website at https://www.trade.gov/​administrative-protective-orders.

Separate Rates

In order to obtain separate rate status in an NME investigation, exporters and producers must submit a separate rate application. The specific requirements for submitting a separate rate application in an NME investigation are outlined in detail in the application itself, which is available on Commerce's website at https://access.trade.gov/​Resources/​nme/​nme-sep-rate.html. The separate rate application will be due 30 days after publication of this initiation notice. Exporters and producers must file a timely separate rate application if they want to be considered for individual examination. Exporters and producers who submit a separate rate application and have been selected as mandatory respondents will be eligible for consideration for separate rate status only if they respond to all parts of Commerce's AD questionnaire as mandatory respondents. Commerce requires that companies from China submit a response both to the Q&V questionnaire and to the separate rate application by the respective deadlines to receive consideration for separate rate status. Companies not filing a timely Q&V questionnaire response will not receive separate rate consideration.

Use of Combination Rates

Commerce will calculate combination rates for certain respondents that are eligible for a separate rate in an NME investigation. The Separate Rates and Combination Rates Bulletin states:

{w}hile continuing the practice of assigning separate rates only to exporters, all separate rates that {Commerce} will now assign in its NME investigation will be specific to those producers that supplied the exporter during the period of investigation. Note, however, that one rate is calculated for the exporter and all of the producers which supplied subject merchandise to it during the period of investigation. This practice applies both to mandatory respondents receiving an individually calculated separate rate as well as the pool of non-investigated firms receiving the {weighted average} of the individually calculated rates. This practice is referred to as the application of “combination rates” because such rates apply to specific combinations of exporters and one or more producers. The cash-deposit rate assigned to an exporter will apply only to merchandise both exported by the firm in question and produced by a firm that supplied the exporter during the period of investigation.^[40]

Distribution of Copies of the Petition

In accordance with section 732(b)(3)(A) of the Act and 19 CFR 351.202(f), a copy of the public version of the Petition has been provided to the Government of China via ACCESS. To the extent practicable, we will attempt to provide a copy of the public version of the Petition to each exporter named in the Petition, as provided under 19 CFR 351.203(c)(2).

ITC Notification

Commerce will notify the ITC of its initiation, as required by section 732(d) of the Act.

Preliminary Determination by the ITC

The ITC will preliminarily determine, within 45 days after the date on which the Petition was filed, whether there is a reasonable indication that imports of LSPTVs from China are materially injuring, or threatening material injury to, a U.S. industry.^[41] A negative ITC determination will result in the investigation being terminated.^[42] Otherwise, this LTFV investigation will proceed according to statutory and regulatory time limits.

Submission of Factual Information

Factual information is defined in 19 CFR 351.102(b)(21) as: (i) evidence submitted in response to questionnaires; (ii) evidence submitted in support of allegations; (iii) publicly available information to value factors under 19 CFR 351.408(c) or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence placed on the record by Commerce; and (v) evidence other than factual information described in (i)-(iv). Section 351.301(b) of Commerce's regulations requires any party, when submitting factual information, to specify under which subsection of 19 CFR 351.102(b)(21) the information is being submitted ^[43] and, if the information is submitted to rebut, clarify, or correct factual information already on the record, to provide an explanation identifying the information already on the record that the factual information seeks to rebut, clarify, or correct.^[44] Time limits for the submission of factual information are addressed in 19 CFR 351.301, which provides specific time limits based on the type of factual information being submitted. Interested parties should review the regulations prior to submitting factual information in this investigation.

Extensions of Time Limits

Parties may request an extension of time limits before the expiration of a time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. In general, an extension request will be considered untimely if it is filed after the expiration of the time limit established under 19 CFR 351.301, or as otherwise specified by Commerce.^[45] For submissions that are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. ET on the due date. Under certain circumstances, Commerce may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, we will inform parties in a letter or memorandum of the deadline (including a specified time) by which extension requests must be filed to be considered timely. An extension request must be made in a separate, standalone submission; under limited circumstances we will grant untimely filed requests for the extension of time limits, where we determine, based on 19 CFR 351.302, that extraordinary circumstances exist. Parties should review Commerce's regulations concerning the extension of time limits and the Time Limits Final Rule prior to submitting factual information in this investigation.^[46]

Certification Requirements

Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information.^[47] Parties must use the certification formats provided in 19 CFR 351.303(g).^[48] Commerce intends to reject factual submissions if the submitting party does not comply with the applicable certification requirements.

Notification to Interested Parties

Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305. Parties wishing to participate in this investigation should ensure that they meet the requirements of 19 CFR 351.103(d) ( e.g., by filing the required letter of appearance). Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).^[49]

This notice is issued and published pursuant to sections 732(c)(2) and 777(i) of the Act, and 19 CFR 351.203(c).

Dated: July 10, 2024.

Abdelali Elouaradia,

Deputy Assistant Secretary for Enforcement and Compliance.

Appendix

Scope of the Investigation

The merchandise covered by this investigation consists of certain low speed personal transportation vehicles (LSPTV) and subassemblies thereof, whether finished or unfinished and whether assembled or unassembled, with or without tires, wheels, seats, steering columns and steering wheels, canopies, roofs, or batteries. LSPTVs meeting this description are generally open-air vehicles with a minimum of four wheels, a steering wheel, a traditional side-by-side or in-line row seating arrangement ( i.e., non-straddle), foot operated accelerator and brake pedals, and a gross vehicle weight of no greater than 5,500 pounds. The main power source for subject LSPTVs is either an electric motor and battery (including but not limited to lithium-ion batteries, lithium phosphate batteries, lead acid batteries, and absorbed glass mat batteries) or a gas-powered internal combustion engine. Subject LSPTVs may be described as golf carts, golf cars, low speed vehicles, personal transportation vehicles, or light utility vehicles.

LSPTVs subject to this investigation typically have a maximum top nameplate speed of no greater than 25 miles per hour as required by federal, state, and local laws and regulations. Subject LSPTVs with a maximum top nameplate speed greater than 20 miles per hour normally must comply with the U.S. Department of Transportation's Federal Motor Vehicle Safety Standards for Low-Speed Vehicles set forth in 49 CFR 571.500. LSPTVs that otherwise meet the physical description of this scope but are not certified under 49 CFR 571.500 and are not certified under other sections of subpart B of the Federal Motor Vehicle Safety Standards (49 CFR part 571), are not excluded from this investigation. LSPTVs that are certified under both 49 CFR 571.500 and other sections of subpart B of the Federal Motor Vehicle Safety Standards remain subject to the scope of this investigation. Subject LSPTVs that have a maximum top nameplate speed of less than 25 miles per hour may be certified to the SAE International (SAE) standards SAE J2258 and SAE J2358. LSPTVs that have a maximum top nameplate speed of less than 20 miles per hour may also be certified to the Outdoor Power Equipment Institute (OPEI) standards OPEI Z130.1 and OPEI Z135.

An unfinished and/or unassembled LSPTV subject to this investigation covers at a minimum a subassembly, also known as a “rolling chassis,” which is typically comprised of, but not limited to, a frame or body with front and/or rear suspension components (such as arms, springs, axles, spindles, and shafts) installed and powertrain components (including either an electric motor or a gas-powered internal combustion engine) installed or ready for installation.

When imported together with a rolling chassis subject to this investigation, other LSPTV components, such as batteries, bumpers, wheel and tire assemblies, cowlings, fenders, grills, kick plates, steering column and steering wheel assemblies, dash assembly, seat assemblies, pedal assemblies, brake assemblies, canopy or roof assemblies, temporary rain enclosures, windshields, mirrors, headlights, taillights, lighting systems, or storage—whether assembled or unassembled, whether as part of a kit or not, and whether or not accompanied by additional components—constitute part of an unfinished and/or unassembled LSPTV that is subject to this investigation. The inclusion of other products, components, or assemblies not described here does not remove the product from the scope.

Subject LSPTVs and subassemblies are covered by the scope of this investigation whether or not they are accompanied by other parts. This investigation covers all LSPTVs and subassemblies meeting the physical description of the scope, regardless of overall length, width, or height. Individual components that do not comprise a subject LSPTV or subassembly that are entered and sold by themselves are not subject to the investigation, but components entered with a LSPTV or subassembly, whether finished or unfinished and whether assembled or unassembled, are subject merchandise.

LSPTVs and subassemblies subject to this investigation include those that are produced in the subject country whether assembled with other components in the subject country or in a third country. Processing or completion of finished and unfinished LSPTVs and subassemblies either in the subject country or in a third country does not remove the product from the scope.

Specifically excluded from the scope of this investigation are all-terrain vehicles (which typically have straddle seating and are steered by handlebars), multipurpose off-highway utility vehicles (which typically have a maximum top nameplate speed of greater than 25 miles per hour), and recreational off-highway vehicles (which typically have a maximum top nameplate speed of greater than 30 miles per hour). Also excluded from the scope are go-karts, electric scooters, golf trolleys, and mobility aids (which include power wheelchairs and scooters which are used for the express purpose of enabling mobility for a person).

The LSPTVs subject to the investigation are typically classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheading 8703.10.5030. LSPTVs subject to the investigation may also enter under HTSUS subheading 8703.90.0100. The LSPTV subassemblies that are subject to the investigation typically enter under HTSUS subheadings 8706.00.1540 and 8707.10.0040. The HTSUS subheadings are provided for convenience and customs purposes only, and the written description of the merchandise subject to the investigation is dispositive.

Footnotes

1.   See Petitioner's Letter, “Petition for the Imposition of Antidumping and Countervailing Duties,” dated June 20, 2024 (the Petition). The members of the petitioning coalition are Club Car, LLC and Textron Specialized Vehicles Inc. See Petition at Volume I (page 1 and Exhibit I-1).

2.   See, generally, Petition.

3.   See Commerce's Letters, “Supplemental Questions,” dated June 24, 2024 (General Issues Questionnaire); and “Supplemental Questions,” dated June 24, 2024; and “Third General Issues Questionnaire,” dated July 8, 2024 (Third General Issues Questionnaire); see also Memorandum, “Phone Call with Counsel to Petitioner,” dated July 5, 2024 (July 5 Memorandum).

4.   See Petitioner's Letters, “Petitioner's Response to First Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition,” dated June 28, 2024 (First General Issues Supplement); “Petitioner's Response to First Supplemental Questionnaire Regarding China Antidumping Duty Volume II of the Petition,” dated June 28, 2024; “Petitioner's Responses to the Scope Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition,” dated July 8, 2024 (Scope Supplement); and “Petitioner's Responses to Second Supplemental Questionnaire Regarding Common Issues and Injury Volume I of the Petition,” dated July 9, 2024 (Second General Issues Supplement).

5.  The American Personal Transportation Vehicle Manufacturers Coalition is an interested party under section 771(9)(E) of the Act, while the members of the petitioning coalition are interested parties under section 771(9)(C) of the Act.

6.   See section on “Determination of Industry Support for the Petition,” infra.

7.   See General Issues Questionnaire; see also July 5 Memorandum and Third General Issues Questionnaire.

8.   See First General Issues Supplement at 1-17; see also Scope Supplement at 1-7 and Exhibits 1 and 2; and Second General Issues Supplement at 2-4.

9.   See Antidumping Duties; Countervailing Duties, Final Rule,62 FR 27296, 27323 (May 19, 1997) ( Preamble); see also19 CFR 351.312.

10.   See19 CFR 351.102(b)(21) (defining “factual information”).

11.   See19 CFR 351.303(b)(1).

12.   Id.

13.   See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures,76 FR 39263 (July 6, 2011); see also Enforcement and Compliance: Change of Electronic Filing System Name,79 FR 69046 (November 20, 2014) for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on using ACCESS can be found at https://access.trade.gov/​help.aspx and a handbook can be found at https://access.trade.gov/​help/​Handbook_​on_​Electronic_​Filing_​Procedures.pdf.

14.   See19 CFR 351.303(b)(1).

15.   See section 771(10) of the Act.

16.   See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).

17.   See Petition at Volume I (pages 18-25 and Exhibits 4, 10, and 21-29); see also First General Issues Supplement at 18.

18.  For a discussion of the domestic like product analysis as applied to this case and information regarding industry support, see Checklist, “Certain Low Speed Personal Transportation Vehicles from the People's Republic of China,” dated concurrently with, and hereby adopted by, this notice (China AD Initiation Checklist) at Attachment II, Analysis of Industry Support for the Antidumping and Countervailing Duty Petitions Covering Certain Low Speed Personal Transportation Vehicles from the People's Republic of China (Attachment II). This checklist is on file electronically via ACCESS.

19.   See Petition at Volume I (pages 2-3 and Exhibit 3); see also First General Issues Supplement at 18; and Second General Issues Supplement at 1-2.

20.   See Petition at Volume I (pages 2-3 and Exhibits 3 and 4); see also First General Issues Supplement at 18-21 and Exhibit I-Supp-2; and Second General Issues Supplement at 1-2.

21.   See Petition at Volume I (pages 2-3 and Exhibits 3 and 4); see also First General Issues Supplement at 18-21 and Exhibit I-Supp-2; and Second General Issues Supplement at 1-2. For further discussion, see Attachment II of the China AD Initiation Checklist.

22.   See Attachment II of the China AD Initiation Checklist.

23.   Id.; see also section 732(c)(4)(D) of the Act.

24.   See Attachment II of the China AD Initiation Checklist.

25.   Id.

26.   Id.

27.   See Petition at Volume I (pages 29-30 and Exhibit 30).

28.   See Petition at Volume I (pages 16-18, 26-48 and Exhibits 13, 18-22, 24-25, and 31-62); see also First General Issues Supplement at 21-22.

29.   See China AD Initiation Checklist at Attachment III, “Analysis of Allegations and Evidence of Material Injury and Causation for the Antidumping and Countervailing Duty Petitions Covering Certain Low Speed Personal Transportation Vehicles from the People's Republic of China.”

30.   See China AD Initiation Checklist.

31.   Id.

32.   See, e.g., Certain Freight Rail Couplers and Parts Thereof from the People's Republic of China: Preliminary Affirmative Determination of Sales at Less Than Fair Value and Preliminary Affirmative Determination of Critical Circumstances,88 FR 15372 (March 13, 2023), and accompanying Preliminary Decision Memorandum at 5, unchanged in Certain Freight Rail Couplers and Parts Thereof from the People's Republic of China: Final Affirmative Determination of Sales at Less-Than-Fair Value and Final Affirmative Determination of Critical Circumstances,88 FR 34485 (May 30, 2023).

33.   See China AD Initiation Checklist.

34.   Id.

35.   Id.

36.   Id.

37.   Id.

38.   See Petition at Volume I (page 13 and Exhibit 12); see also First General Issues Supplement at 1 and Exhibit I-Supp-1.

39.   See Memorandum, “Release of U.S. Customs and Border Protection Entry Data,” dated June 24, 2024.

40.   See Enforcement and Compliance's Policy Bulletin No. 05.1, regarding, “Separate-Rates Practice and Application of Combination Rates in Antidumping Investigation involving NME Countries,” (April 5, 2005), at 6 (emphasis added), available on Commerce's website at https://access.trade.gov/​Resources/​policy/​bull05-1.pdf.

41.   See section 733(a) of the Act.

42.   Id.

43.   See19 CFR 351.301(b).

44.   See19 CFR 351.301(b)(2).

45.   See19 CFR 351.301; see also Extension of Time Limits; Final Rule,78 FR 57790 (September 20, 2013) ( Time Limits Final Rule), available at https://www.gpo.gov/​fdsys/​pkg/​FR-2013-09-20/​html/​2013-22853.htm.

46.   See19 CFR 351.302; see also, e.g., Time Limits Final Rule.

47.   See section 782(b) of the Act.

48.   See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings,78 FR 42678 (July 17, 2013) ( Final Rule). Additional information regarding the Final Rule is available at https://access.trade.gov/​Resources/​filing/​index.html.

49.   See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings,88 FR 67069 (September 29, 2023).