[Federal Register Volume 61, Number 138 (Wednesday, July 17, 1996)]
[Rules and Regulations]
[Page 37208]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-18069]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
21 CFR Part 175
[Docket No. 94F-0398]
Indirect Food Additives; Adhesives and Components of Coatings
AGENCY: Food and Drug Administration, HHS.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA) is amending the food
additive regulations to provide for the safe use of 1,4-
cyclohexanedicarboxylic acid as a polybasic acid for use in polyester
resins intended for food-contact coatings. This action is in response
to a petition filed by Eastman Chemical Co.
DATES: Effective July 17, 1996; written objections and requests for a
hearing August 16, 1996.
ADDRESSES: Submit written objections to the Dockets Management Branch
(HFA-305), Food and Drug Administration, Parklawn Dr., rm. 1-23,
Rockville, MD 20857.
FOR FURTHER INFORMATION CONTACT: Vir D. Anand, Center for Food Safety
and Applied Nutrition (HFS-216), Food and Drug Administration, 200 C
St. SW., Washington, DC 20204, 202-418-3081.
SUPPLEMENTARY INFORMATION: In a notice published in the Federal
Register of November 23, 1994 (59 FR 60364), FDA announced that a food
additive petition (FAP 4B4431) had been filed by Eastman Chemical Co.,
P.O. Box 1994, Kingsport, TN 37662. The petition proposed to amend the
food additive regulations in Sec. 175.300 Resinous and polymeric
coatings (21 CFR 175.300) to provide for the safe use of 1,4-
cyclohexanedicarboxylic acid as a polybasic acid for use in polyester
resins intended for food-contact coatings.
FDA has evaluated the data in the petition and other relevant
material. The agency concludes that the proposed use of the additive in
polyester resins intended for food-contact coatings is safe, that the
additive will have its intended technical effect, and therefore, that
Sec. 175.300 should be amended as set forth below.
In accordance with Sec. 171.1(h) (21 CFR 171.1(h)), the petition
and the documents that FDA considered and relied upon in reaching its
decision to approve the petition are available for inspection at the
Center for Food Safety and Applied Nutrition by appointment with the
information contact person listed above. As provided in Sec. 171.1(h),
the agency will delete from the documents any materials that are not
available for public disclosure before making the documents available
for inspection.
The agency has carefully considered the potential environmental
effects of this action. FDA has concluded that the action will not have
a significant impact on the human environment, and that an
environmental impact statement is not required. The agency's finding of
no significant impact and the evidence supporting that finding,
contained in an environmental assessment, may be seen in the Dockets
Management Branch (address above) between 9 a.m. and 4 p.m., Monday
through Friday.
Any person who will be adversely affected by this regulation may at
any time on or before August 16, 1996, file with the Dockets Management
Branch (address above) written objections thereto. Each objection shall
be separately numbered, and each numbered objection shall specify with
particularity the provisions of the regulation to which objection is
made and the grounds for the objection. Each numbered objection on
which a hearing is requested shall specifically so state. Failure to
request a hearing for any particular objection shall constitute a
waiver of the right to a hearing on that objection. Each numbered
objection for which a hearing is requested shall include a detailed
description and analysis of the specific factual information intended
to be presented in support of the objection in the event that a hearing
is held. Failure to include such a description and analysis for any
particular objection shall constitute a waiver of the right to a
hearing on the objection. Three copies of all documents shall be
submitted and shall be identified with the docket number found in
brackets in the heading of this document. Any objections received in
response to the regulation may be seen in the Dockets Management Branch
between 9 a.m. and 4 p.m., Monday through Friday.
List of Subjects in 21 CFR Part 175
Adhesives, Food additives, Food packaging.
Therefore, under the Federal Food, Drug, and Cosmetic Act and under
authority delegated to the Commissioner of Food and Drugs and
redelegated to the Director, Center for Food Safety and Applied
Nutrition, 21 CFR part 175 is amended as follows:
PART 175--INDIRECT FOOD ADDITIVES: ADHESIVES AND COMPONENTS OF
COATINGS
1. The authority citation for 21 CFR part 175 continues to read as
follows:
Authority: Secs. 201, 402, 409, 721 of the Federal Food, Drug,
and Cosmetic Act (21 U.S.C. 321, 342, 348, 379e).
2. Section 175.300 is amended in paragraph (b)(3)(vii)(a) by
alphabetically adding a new item to read as follows:
Sec. 175.300 Resinous and polymeric coatings.
* * * * *
(b) * * *
(3) * * *
(vii) * * *
(a) * * *
* * * * *
1,4-cyclohexanedicarboxylic (CAS Reg. No. 1076-97-7).
* * * * *
Dated: June 28, 1996.
Fred R. Shank,
Director, Center for Food Safety and Applied Nutrition.
[FR Doc. 96-18069 Filed 7-16-96; 8:45 am]
BILLING CODE 4160-01-F