[Federal Register Volume 60, Number 137 (Tuesday, July 18, 1995)]
[Notices]
[Pages 36873-36875]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-17635]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
[Docket No. 95-52; Notice 1]
Receipt of Petition for Decision That Nonconforming 1992
Mercedes-Benz 300CE Passenger Cars Are Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1992
[[Page 36874]]
Mercedes-Benz 300CE passenger cars are eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that a 1992
Mercedes-Benz 300CE that was not originally manufactured to comply with
all applicable Federal motor vehicle safety standards is eligible for
importation into the United States because (1) it is substantially
similar to a vehicle that was originally manufactured for importation
into and sale in the United States and that was certified by its
manufacturer as complying with the safety standards, and (2) it is
capable of being readily altered to conform to the standards.
DATE: The closing date for comments on the petition is August 17, 1995.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Section, Room 5109, National
Highway Traffic Safety Administration, 400 Seventh St., SW, Washington,
DC 20590. [Docket hours are from 9:30 am to 4 pm].
FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle
Safety Compliance, NHTSA (202-366-5306).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i)(I)
of the National Traffic and Motor Vehicle Safety Act (the Act)), a
motor vehicle that was not originally manufactured to conform to all
applicable Federal motor vehicle safety standards shall be refused
admission into the United States unless NHTSA has decided that the
motor vehicle is substantially similar to a motor vehicle originally
manufactured for importation into and sale in the United States,
certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and
of the same model year as the model of the motor vehicle to be
compared, and is capable of being readily altered to conform to all
applicable Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer
90-006) has petitioned NHTSA to decide whether 1992 Mercedes-Benz 300CE
(Model ID 124.050 and 124.061) passenger cars are eligible for
importation into the United States. The vehicle which J.K. believes is
substantially similar is the 1992 Mercedes-Benz 300CE that was
manufactured for importation into, and sale in, the United States and
certified by its manufacturer, Daimler Benz A.G., as conforming to all
applicable Federal motor vehicle safety standards.
The petitioner claims that it carefully compared the non-U.S.
certified 1992 Mercedes-Benz 300CE to its U.S. certified counterpart,
and found the two vehicles to be substantially similar with respect to
compliance with most Federal motor vehicle safety standards.
J.K. submitted information with its petition intended to
demonstrate that the non-U.S. certified 1992 Mercedes-Benz 300CE, as
originally manufactured, conforms to many Federal motor vehicle safety
standards in the same manner as its U.S. certified counterpart, or is
capable of being readily altered to conform to those standards.
Specifically, the petitioner claims that the non-U.S. certified
1992 Mercedes-Benz 300CE is identified to its U.S. certified
counterpart with respect to compliance with Standards Nos. 102
Transmission Shift Lever Sequence, * * *. 103 Defrosting and Defogging
Systems, 104 Windshield Wiping and Washing Systems, 105 Hydraulic Brake
Systems, 106 Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic
Tires, 113 Hod Latch Systems, 116 Brake Fluid, 124 Accelerator Control
Systems, 201 Occupant Protection in Interior Impact, 202 Head
Restraints, 203 Impact Protection for the Driver From the Steering
Control System, 204 Steering Control Rearward Displacement, 205 Glazing
Materials, 206 Door Locks and Door Retention Components, 207 Seating
Systems, 209 Seat Belt Assemblies, 210 Seat Belt Assembly Anchorages,
211 Wheel Nuts, Wheel Discs and Hubcaps, 212 Windshield Retention, 216
Roof Crush Resistance, 219 Windshield Zone Intrusion, 301 Fuel System
Integrity, and 302 Flammability of Interior Materials.
Additionally, the petitioner states that the non-U.S. certified
1992 Mercedes-Benz 300CE complies with the Bumper Standard found in 49
CFR part 581.
Petitioner also contends that the vehicle is capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) Substitution of a lens
marked ``Brake'' for a lens with an ECE symbol on the brake failure
indicator lamp; (b) recalibration of the speedometer/odometer from
kilometers to miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: (a) Installation of U.S.-model headlamps and front
sidemakers; (b) installation of U.S.-model taillamp assemblies which
incorporate rear sidemarkers; (c) installation of a high mounted stop
lamp assembly.
Standard No. 110 Tire Selection and Rims: Installation of a tire
information placard.
Standard No. 111 Rearview Mirror: replacement of the passenger side
rearview mirror with a U.S.-model component.
Standard No. 114 Theft Protection: Installation of a warning buzzer
microswitch and a warning buzzer in the steering lock assembly.
Standard No. 115 Vehicle Identification Number: Installation of a
VIN plate that can be read from outside the left windsheld pillar, and
a VIN reference label on the edge of the door or latch post nearest the
driver.
Standard No. 118 Power Window Systems: Installaton of a relay on
the power window system so that the window transport is inoperative
when the ignition is switched off.
Standard No. 208 Occupant Crash Protection: (a) Installation of a
seat belt warning buzzer, wired to the seat belt latch; (b)
installation of knee bolsters to augument the vehicle's air bag based
passive restraint system, which otherwise conforms to the standard. The
petitioner stated that the vehicle is equipped with lap and shoulder
belts in the front and rear outboard seating positions, and with a lap
belt in the rear center seating position.
Standard No. 214 Side Impact Protection: installation of
reinforcing beams.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Section, National Highway Traffic Safety
Administration, Room 5109, 400 Seventh Street, SW., Washington, DC
20590. It is requested but not required that 10 copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before
[[Page 36875]]
and after that date. To the extent possible, comments filed after the
closing date will also be considered. Notice of final action on the
petition will be published in the Federal Register pursuant to the
authority indicated below.
Authority: 49 U.S.C. 30141 (a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: July 13, 1995.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 95-17635 Filed 7-17-95; 8:45 am]
BILLING CODE 4910-59-M
