[Federal Register Volume 63, Number 138 (Monday, July 20, 1998)]
[Rules and Regulations]
[Pages 38742-38743]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-19178]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 97-SW-58-AD; Amendment 39-10421; AD 98-07-03]
RIN 2120-AA64
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 412
Helicopters and Agusta S.p.A Model AB 412 Helicopters; Correction
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: This document corrects a technical bulletin date in
airworthiness directive (AD) 98-07-03 that was incorrectly published in
the Federal Register on March 24, 1998 (63 FR 14026). This AD is
applicable to Bell Helicopter Textron, Inc. Model 412 helicopters and
Agusta S.p.A Model AB 412 helicopters and requires a temporary
reduction of the never-exceed velocity (Vne) limitation until an
inspection of the tail rotor yoke (yoke) assembly for fatigue damage
and installation of a redesigned yoke flapping stop are accomplished.
Recurring periodic and special inspections to detect occurrences of
yoke overload are also required.
DATES: Effective April 8, 1998.
The incorporation by reference of certain publications listed in
the regulations was previously approved by the Director of the Federal
Register as of April 8, 1998 (63 FR 14026, March 24, 1998).
FOR FURTHER INFORMATION CONTACT: Mr. Shep Blackman, Aerospace Engineer,
FAA, Rotorcraft Directorate, Rotorcraft Standards Staff, 2601 Meacham
Blvd., Fort Worth, Texas 76137, telephone (817) 222-5296, fax (817)
222-5961.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 98-07-03,
amendment 39-10421, applicable to Bell Helicopter, Textron, Inc. Model
412 Helicopters and Agusta S.p.A Model AB 412 helicopters was published
in the Federal Register on March 24, 1998 (63 FR 14026). That AD
requires a temporary reduction of the Vne limitation until an
inspection of the yoke assembly for fatigue damage and installation of
a redesigned yoke flapping stop are accomplished. Recurring periodic
and special inspections to detect occurrences of yoke overload are also
required.
As published, the Agusta Technical Bulletin date given in the
Supplementary Information and in paragraphs (c)(1) and (g) is
incorrect.
[[Page 38743]]
Since no other part of the regulatory information has been changed,
the final rule is not being republished.
The effective date of the AD remains April 8, 1998.
In rule FR Doc. 98-7414 published on March 24, 1998 (63 FR 14026),
make the following corrections:
Sec. 39.13 [Corrected]
(1) On page 14027, in the first column under Supplementary
Information, change ``December 2, 1996'' to ``April 17, 1997.''
(2) On page 14028, in paragraphs (c)(1), (d), and (g), change
``December 2, 1996'' to ``April 17, 1997.''
Issued in Fort Worth, Texas, on July 10, 1998.
Larry M. Kelly,
Acting Manager, Rotorcraft Directorate, Aircraft Certification Service.
[FR Doc. 98-19178 Filed 7-17-98; 8:45 am]
BILLING CODE 4910-13-P
