2016-17313. Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Korea: Final Determination of Sales at Less Than Fair Value  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    SUMMARY:

    The Department of Commerce (the Department) determines that heavy walled rectangular welded carbon steel pipes and tubes (HWR pipes and tubes) Start Printed Page 47348from the Republic of Korea (Korea) are being, or are likely to be, sold in the United States at less than fair value (LTFV), as provided in section 735(a) of the Tariff Act of 1930, as amended (the Act). The period of investigation (POI) is July 1, 2014, through June 30, 2015. The final dumping margins of sales at LTFV are listed below in the “Final Determination” section of this notice.

    DATES:

    Effective July 21, 2016.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Elizabeth Eastwood or Alice Maldonado, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-3874 or (202) 482-4682, respectively.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background

    On March 1, 2016, the Department published the Preliminary Determination of sales at LTFV of HWR pipes and tubes from Korea.[1] A summary of the events that occurred since the Department published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Issues and Decision Memorandum, which is hereby adopted by this notice.[2]

    Scope of the Investigation

    The scope of the investigation covers HWR pipes and tubes of rectangular (including square) cross section, having a nominal wall thickness of not less than 4 mm. For a complete description of the scope of the investigation, see Appendix I.

    Analysis of Comments Received

    All issues raised in the case and rebuttal briefs by parties in this investigation are addressed in the Issues and Decision Memorandum. A list of the issues raised is attached to this notice as Appendix II. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov and it is available to all parties in the Central Records Unit, room B-8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​index.html. The signed and electronic versions of the Issues and Decision Memorandum are identical in content.

    Verification

    As provided in section 782(i) of the Act, in February and March 2016, we verified the sales and cost information submitted by mandatory respondents Dong-A Steel Company (DOSCO) and HiSteel Co., Ltd (HiSteel) for use in our final determination. We used standard verification procedures, including an examination of relevant accounting and production records, and original source documents provided by DOSCO and HiSteel.[3]

    Changes Since the Preliminary Determination

    Based on our analysis of the comments received and our findings at verification, we made certain changes to the margin calculations for DOSCO and HiSteel. For a discussion of these changes, see the “Margin Calculations” section of the Issues and Decision Memorandum.

    All-Others Rate

    Section 735(c)(5)(A) of the Act provides that the estimated all-others rate shall be an amount equal to the weighted-average of the estimated weighted-average dumping margins established for exporters and producers individually investigated excluding any zero or de minimis margins, and margins determined entirely under section 776 of the Act. For the final determination, the Department calculated the “all others” rate based on a weighted average of DOSCO's and HiSteel's margins using publicly-ranged quantities of their sales of subject merchandise.[4]

    Final Determination

    The final weighted-average dumping margins are as follows:

    Exporter/ManufacturerWeighted- average dumping margin (percent)
    Dong-A Steel Company2.34
    HiSteel Co., Ltd3.82
    All Others3.24

    Disclosure

    We will disclose the calculations performed within five days of the date of publication of this notice to parties in this proceeding in accordance with 19 CFR 351.224(b).

    Continuation of Suspension of Liquidation

    In accordance with section 735(c)(1)(B) of the Act, the Department will instruct U.S. Customs and Border Protection (CBP) to continue to suspend liquidation of all appropriate entries of HWR pipes and tubes from Korea, as described in Appendix I of this notice, which were entered, or withdrawn from Start Printed Page 47349warehouse, for consumption on or after March 1, 2016, the date of publication of the preliminary determination of this investigation in the Federal Register.

    Further, the Department will instruct CBP to require a cash deposit equal to the estimated amount by which the normal value exceeds the U.S. price as shown above.

    International Trade Commission (ITC) Notification

    In accordance with section 735(d) of the Act, we will notify the ITC of the final affirmative determination of sales at LTFV. Because the final determination in this proceeding is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will make its final determination as to whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports of HWR pipes and tubes from Korea no later than 45 days after our final determination. If the ITC determines that material injury or threat of material injury does not exist, the proceeding will be terminated and all cash deposits will be refunded. If the ITC determines that such injury does exist, the Department will issue an antidumping duty order directing CBP to assess, upon further instruction by the Department, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation.

    Notification Regarding Administrative Protective Orders (APO)

    This notice serves as a reminder to parties subject to APO of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the return or destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

    This determination and this notice are issued and published pursuant to sections 735(d) and 777(i)(1) of the Act.

    Start Signature

    Dated: July 14, 2016.

    Paul Piquado,

    Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix I

    Scope of the Investigation

    The products covered by this investigation are certain heavy walled rectangular welded steel pipes and tubes of rectangular (including square) cross section, having a nominal wall thickness of not less than 4 mm. The merchandise includes, but is not limited to, the American Society for Testing and Materials (ASTM) A-500, grade B specifications, or comparable domestic or foreign specifications.

    Included products are those in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements below exceeds the quantity, by weight, respectively indicated:

    • 2.50 percent of manganese, or
    • 3.30 percent of silicon, or
    • 1.50 percent of copper, or
    • 1.50 percent of aluminum, or
    • 1.25 percent of chromium, or
    • 0.30 percent of cobalt, or
    • 0.40 percent of lead, or
    • 2.0 percent of nickel, or
    • 0.30 percent of tungsten, or
    • 0.80 percent of molybdenum, or
    • 0.10 percent of niobium (also called columbium), or
    • 0.30 percent of vanadium, or
    • 0.30 percent of zirconium.

    The subject merchandise is currently provided for in item 7306.61.1000 of the Harmonized Tariff Schedule of the United States (HTSUS). Subject merchandise may also enter under HTSUS 7306.61.3000. While the HTSUS subheadings and ASTM specification are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

    Appendix II

    List of Topics Discussed in the Issues and Decision Memorandum

    I. Summary

    II. Background

    III. Scope of the Investigation

    IV. Margin Calculations

    V. Discussion of the Issues

    1. U.S. Date of Sale

    2. Weight Basis for Comparison Methodology

    3. Costs for Non-Prime Merchandise

    4. Differential Pricing Rulemaking

    5. Differential Pricing Patterns and a Meaningful Difference

    6. Verification Corrections

    7. DOSCO's Constructed Export (CEP) Offset Claim

    8. Raw Material Costs for DOSCO

    VI. Recommendation

    End Supplemental Information

    Footnotes

    1.  See Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Korea: Final Determination of Sales at Less Than Fair Value, 81 FR 10585 (March 1, 2016) (Preliminary Determination).

    Back to Citation

    2.  See Memorandum to Paul Piquado, “Issues and Decision Memorandum for the Final Affirmative Determination in the Less-Than-Fair-Value Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Korea,” dated concurrently with this notice (Issues and Decision Memorandum).

    Back to Citation

    3.  See Memorandum to the File from Alice Maldonado and Elizabeth Eastwood, Senior Analysts, and Whitley Herndon, Analyst, entitled, “Verification of the Sales Response of DOSCO America, Inc. in the Antidumping Duty Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From Korea,” dated April 6, 2016; Memorandum to the file from Alice Maldonado and Elizabeth Eastwood, Senior Analysts, and Whitley Herndon, Analyst, entitled, “Verification of the Sales Response of Dong-A Steel Company in the Antidumping Duty Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From Korea,” dated April 8, 2016; Memorandum to the File, from Heidi K. Schriefer and Kristin Case, Senior Accountants, entitled, “Verification of the Cost Response of Dong-A Steel Company in the Antidumping Duty Less Than Fair Value Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Korea,” dated April 5, 2016; Memorandum to the file from Elizabeth Eastwood and Alice Maldonado, Senior Analysts, and Whitley Herndon, Analyst, entitled, “Verification of the Sales Response of HiSteel Co., Ltd. in the Antidumping Duty Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From Korea,” dated April 6, 2016; and Memorandum to the File, from Kristin L. Case, Senior Accountant, entitled, “Verification of the Cost Response of HiSteel Co., Ltd. in the Less-Than-Fair-Value Investigation of Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes From the Republic of Korea,” dated April 6, 2016.

    Back to Citation

    4.  See Memorandum to the File from Alice Maldonado, Senior Analyst, entitled, “Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from the Republic of Korea: Calculation of the Final Margin for All Other Companies,” dated July 14, 2016. With two respondents, we normally calculate (A) a weighted-average of the dumping margins calculated for the mandatory respondents; (B) a simple average of the dumping margins calculated for the mandatory respondents; and (C) a weighted-average of the dumping margins calculated for the mandatory respondents using each company's publicly-ranged values for the merchandise under consideration. We compare (B) and (C) to (A) and select the rate closest to (A) as the most appropriate rate for all other companies. See Ball Bearings and Parts Thereof From France, Germany, Italy, Japan, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Final Results of Changed-Circumstances Review, and Revocation of an Order in Part, 75 FR 53661, 53663 (September 1, 2010).

    Back to Citation

    [FR Doc. 2016-17313 Filed 7-20-16; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Effective Date:
7/21/2016
Published:
07/21/2016
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2016-17313
Dates:
Effective July 21, 2016.
Pages:
47347-47349 (3 pages)
Docket Numbers:
A-580-880
PDF File:
2016-17313.pdf
Supporting Documents:
» Requests for Nominations: Trade Promotion Coordinating Committee
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Drawn Stainless Steel Sinks from the People's Republic of China; Recission
» Determinations of Sales at Less than Fair Value: Certain Carbon and Alloy Steel Cut-to-Length Plate from Brazil, South Africa, and Republic of Turkey
» Meetings: United States Travel and Tourism Advisory Board
» Investigations; Determinations, Modifications, and Rulings, etc.: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from Republic of Turkey
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Carbon and Alloy Steel Cut-to-Length Plate from People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Pasta from Italy
» Determinations of Sales at Less Than Fair Value: Truck and Bus Tires From People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Initiation of Five-Year (Sunset) Review