2020-16073. Certain Carbon and Alloy Steel Cut-to-Length Plate From Belgium: Preliminary Results of Antidumping Duty Administrative Review; 2018-2019  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    SUMMARY:

    The Department of Commerce (Commerce) preliminarily determines that the producers/exporters subject to this administrative review made sales of subject merchandise at less than normal value (NV). Interested parties are invited to comment on these preliminary results of review.

    DATES:

    Applicable July 24, 2020.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Alex Wood or Brittany Bauer, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-1959 or (202) 482-3860, respectively.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background

    On July 15, 2019, based on timely requests for review, in accordance with 19 CFR 351.221(c)(1)(i), we initiated an administrative review on certain carbon and alloy steel cut-to-length plate from Belgium.[1] This review covers four producers and/or exporters of the subject merchandise.[2] Commerce selected two companies, Industeel Belgium S.A. (Industeel) and NLMK Belgium, for individual examination. The producers and/or exporters not selected for individual examination are listed in the “Preliminary Results of the Review” section of this notice.

    On January 9, 2020, Commerce extended the preliminary results of this review by 119 days, until May 29, 2020.[3] On April 24, 2020, Commerce tolled all deadlines in administrative reviews by 50 days, thereby extending the deadline for these results until July 20, 2020.[4] For a complete description of the events that followed the initiation of this review, see the Preliminary Decision Memorandum.[5]

    Start Printed Page 44855

    Scope of the Order

    The products covered by the order are certain carbon and alloy steel hot-rolled or forged flat plate products not in coils, whether or not painted, varnished, or coated with plastics or other non-metallic substances from Belgium. Products subject to the order are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7225.40.1110, 7225.40.1180, 7225.40.3005, 7225.40.3050, 7226.20.0000, and 7226.91.5000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this scope is dispositive.[6]

    Methodology

    Commerce is conducting this review in accordance with section 751(a)(1)(B) and (2) of the Tariff Act of 1930, as amended (the Act). Export price and constructed export price are calculated in accordance with section 772 of the Act. NV is calculated in accordance with section 773 of the Act.

    For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://enforcement.trade.gov/​frn/​summary. The signed and electronic versions of the Preliminary Decision Memorandum are identical in content. A list of the topics discussed in the Preliminary Decision Memorandum is attached as an Appendix to this notice.

    Preliminary Results of the Review

    As a result of this review, we preliminarily determine that the following weighted-average dumping margins exist for the respondents for the period May 1, 2018 through April 30, 2019:

    Producers/exportersWeighted- average dumping margin (percent)
    Industeel Belgium S.A19.57
    NLMK Clabecq S.A./NLMK Plate Sales S.A./NLMK Sales Europe S.A./NLMK Manage Steel Center S.A./NLMK La Louviere S.A12.29
    Stahlo Stahl Service GmbH & Co. KG*15.93
    Tranter Service Centers*15.93
    * Review-Specific Average Rate 7

    Disclosure and Public Comment

    Commerce intends to disclose the calculations performed in connection with these preliminary results to interested parties within five days after the date of publication of this notice.[8] Interested parties may submit case briefs to Commerce no later than 30 days after the date of publication of this notice.[9] Rebuttal briefs, limited to issues raised in the case briefs, may be filed no later than seven days after the time limit for filing case briefs.[10] Parties who submit case briefs or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.[11] Case and rebuttal briefs should be filed using ACCESS.[12]

    Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, filed electronically via ACCESS within 30 days after the date of publication of this notice.[13] Hearing requests should contain: (1) The party's name, address, and telephone number; (2) the number of participants; and (3) a list of issues to be discussed. Oral presentations at the hearing will be limited to issues raised in the briefs. If a request for a hearing is made, Commerce intends to hold the hearing at a date and time to be determined.[14] Parties should confirm the date, time, and location of the hearing two days before the scheduled date.

    An electronically-filed document must be received successfully in its entirety by ACCESS by 5:00 p.m. Eastern Time on the established deadline. Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.[15]

    Commerce intends to issue the final results of this administrative review, including the results of its analysis of issues raised in any written briefs, not later than 120 days after the date of publication of this notice, unless otherwise extended.[16]

    Assessment Rates

    Upon completion of the administrative review, Commerce shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries.[17]

    Pursuant to 19 CFR 351.212(b)(1), where the respondents reported the entered value of their U.S. sales, we calculated importer-specific ad valorem duty assessment rates based on the ratio of the total amount of dumping calculated for the examined sales to the total entered value of the sales for which entered value was reported. Where the respondents did not report entered value, we calculated the entered value in order to calculate the assessment rate. Where either the respondent's weighted-average dumping margin is zero or de minimis within the meaning of 19 CFR 351.106(c)(1), or an importer-specific rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties.

    For the companies which were not selected for individual review, we will assign an assessment rate based on the average [18] of the cash deposit rates calculated for Industeel and NLMK Belgium, excluding any which are zero or de minimis or determined entirely based on adverse facts available. The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for future deposits of estimated duties, where applicable.

    Start Printed Page 44856

    Commerce's “reseller policy” will apply to entries of subject merchandise during the POR produced by companies included in these final results of review for which the reviewed companies did not know that the merchandise they sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction.[19]

    We intend to issue liquidation instructions to CBP 15 days after publication of the final results of this review.

    Cash Deposit Requirements

    The following deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for the exporters listed above will be equal to the weighted-average dumping margin established in the final results of this review, except if the rate is less than 0.50 percent and, therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; (2) for companies not participating in this review, the cash deposit rate will continue to be the company-specific cash deposit rate published for the most recently completed segment; (3) if the exporter is not a firm covered in this review, or the original less-than-fair-value (LTFV) investigation, but the producer is, then the cash deposit rate will be the cash deposit rate established for the most recently completed segment for the producer of the merchandise; and (4) the cash deposit rate for all other producers or exporters will continue to be 5.40 percent, the all-others rate established in the LTFV investigation.[20] These deposit requirements, when imposed, shall remain in effect until further notice.

    Notification to Importers

    This notice serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

    Notification to Interested Parties

    We are issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

    Start Signature

    Dated: July 17, 2020.

    Jeffrey I. Kessler,

    Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix

    List of Topics Discussed in the Preliminary Decision Memorandum

    I. Summary

    II. Background

    III. Scope of the Order

    IV. Companies Not Selected for Individual Examination

    V. Discussion of the Methodology

    VI. Currency Conversion

    VII. Recommendation

    End Supplemental Information

    Footnotes

    1.  See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 84 FR 33739 (July 15, 2019).

    Back to Citation

    2.  Commerce collapsed NLMK Clabecq S.A., NLMK Plate Sales S.A., NLMK Sales Europe S.A., NLMK Manage Steel Center S.A., and NLMK La Louviere S.A. as a single entity (collectively, NLMK Belgium) in the less-than-fair-value investigation. See Certain Carbon and Alloy Steel Cut-To-Length Plate from Belgium: Final Determination of Sales at Less Than Fair Value and Final Determination of Critical Circumstances, in Part, 82 FR 16378 (April 4, 2017).

    Back to Citation

    3.  See Memorandum, “Carbon and Alloy Steel Cut-to-Length Plate from Belgium: Extension of Deadline for Preliminary Results of 2018-2019 Antidumping Duty Administrative Review,” dated January 9, 2020.

    Back to Citation

    4.  See Memorandum, “Tolling of Deadlines for Antidumping and Countervailing Duty Administrative Reviews in Response to Operational Adjustments Due to COVID-19,” dated April 24, 2020.

    Back to Citation

    5.  See Memorandum, “Decision Memorandum for the Preliminary Results of the 2018-2019 Administrative Review of the Antidumping Duty Order on Certain Carbon and Alloy Steel Cut-To-Length Plate from Belgium,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

    Back to Citation

    6.  For a full description of the scope of the order, see Preliminary Decision Memorandum.

    Back to Citation

    7.  This rate is based on the rates for the respondents that were selected for individual review, excluding rates that are zero, de minimis, or based entirely on facts available. See section 735(c)(5)(A) of the Act.

    8.  See 19 CFR 351.224(b).

    Back to Citation

    10.  Commerce is exercising its discretion, under 19 CFR 351.309(d)(1), to alter the time limit for filing of rebuttal briefs.

    Back to Citation

    15.  See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 10, 2020).

    Back to Citation

    16.  See Section 751(a)(3)(A) of the Act.

    Back to Citation

    18.  This rate was calculated as discussed in footnote 5, above.

    Back to Citation

    19.  For a full discussion of this practice, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).

    Back to Citation

    20.  See Certain Carbon and Alloy Steel Cut-To-Length Plate from Austria, Belgium, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, and Taiwan: Amended Final Affirmative Antidumping Determinations for France, the Federal Republic of Germany, the Republic of Korea and Taiwan, and Antidumping Duty Orders, 82 FR 24096, 24098 (May 25, 2017).

    Back to Citation

    [FR Doc. 2020-16073 Filed 7-23-20; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Published:
07/24/2020
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2020-16073
Dates:
Applicable July 24, 2020.
Pages:
44854-44856 (3 pages)
Docket Numbers:
A-423-812
PDF File:
2020-16073.Pdf
Supporting Documents:
» Requests for Nominations: Trade Promotion Coordinating Committee
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Drawn Stainless Steel Sinks from the People's Republic of China; Recission
» Determinations of Sales at Less than Fair Value: Certain Carbon and Alloy Steel Cut-to-Length Plate from Brazil, South Africa, and Republic of Turkey
» Meetings: United States Travel and Tourism Advisory Board
» Investigations; Determinations, Modifications, and Rulings, etc.: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from Republic of Turkey
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Carbon and Alloy Steel Cut-to-Length Plate from People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Pasta from Italy
» Determinations of Sales at Less Than Fair Value: Truck and Bus Tires From People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Initiation of Five-Year (Sunset) Review