02-18994. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 23, 2002 to July 5, 2002, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

DATES:

Comments identified by the docket ID number OPPT-2002-0040 and the specific PMN number, must be received on or before August 26, 2002.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0040 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Office of Program Management and Evaluation, Office of Pollution Prevention and Toxics (7401M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations”,” Regulations and Proposed Rules, and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the Federal Register listings at http://www.epa.gov/​fedrgstr/​.

2. In person. The Agency has established an official record for this action under docket ID number OPPT-2002-0040. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, any test data submitted by the Manufacturer/Importer is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B- 607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is [phone].

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0040 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

3. Electronically. You may submit your comments electronically by e-mail to: [e-mail], or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket ID number OPPT-2002-0040 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 23, 2002 to July 5, 2002, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 27 Premanufacture Notices Received From: 06/23/02 to 07/05/02

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-02-0795	06/24/02	09/22/02	CBI	(G) Oil-field additive	(G) Copolymer
P-02-0796	06/24/02	09/22/02	Nagase America Corporation	(G) Additive for a lubricant	(G) Polyglycerin alkyl ether
P-02-0797	06/24/02	09/22/02	CBI	(G) Oil-field additive	(G) Copolymer
P-02-0798	06/25/02	09/23/02	CBI	(G) Reactive hot melt adhesive	(G) Polyurethane/polyester copolymer
P-02-0799	06/25/02	09/23/02	CBI	(G) Coating additive	(G) Acrylic resin
P-02-0800	06/25/02	09/23/02	Arteva Specialties S.A.R.L. d/b/a Kosa	(S) Raw material in the manufacture of rigid polyurethane foam	(G) Aromatic polyester polyol
P-02-0801	06/26/02	09/24/02	CBI	(G) Encapsulant curative for open, non-dispersive use	(G) Castor oil, mixed esters with carboxylic acid anhydrides
P-02-0802	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0803	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0804	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0805	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0806	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0807	06/26/02	09/24/02	Johnson Polymer	(G) Open, non-dispersive use	(G) Styrene acrylic emulsion polymer
P-02-0808	06/27/02	09/25/02	Reichhold, Inc.	(G) Coating resin	(G) Amine salt of iscyanate, polymer with polyester, vegaetable oils, alkyleneamines, hydroxy substituted carboxylic acid and tetra hydroxy alkane
P-02-0809	06/27/02	09/25/02	CBI	(G) Lubricant base oil [open/non-dispersive use]	(G) Polyester polymer
P-02-0810	06/27/02	09/25/02	CBI	(G) Processing aid	(G) Titanium-aluminum complex
P-02-0811	06/27/02	09/25/02	CBI	(G) Processing aid	(G) Titanium-aluminum complex
P-02-0812	06/27/02	09/25/02	Southwest Distributing Co., Inc.	(S) Flame retardant for polyurethane plastics	(G) Tri-block copolymer of e-caprolactone and dibromoneopentyl glyclol or hydroxy-terminated liquid copolymer of e-caprolactone and dibromoneopentyl glycol
P-02-0813	06/27/02	09/25/02	The Prince Manufacturing Company	(S) Adhesion promoter for polyolefin substrates	(G) Maleic anhydride and acryls modified polyolefine
P-02-0814	06/28/02	09/26/02	CBI	(G) Component of odorant compositions for highly dispersive applications	(G) Aliphatic unsaturated ketone
P-02-0815	07/01/02	09/29/02	CBI	(G) Ink-jet ink	(G) Copper phthalocyaninato-aminosulfonyl sulfo derivatives-sodium/ammonium salts
P-02-0816	07/02/02	09/30/02	3M Company	(G) Protective treatment	(G) Polyaromatic urethane
P-02-0817	07/02/02	09/30/02	CBI	(G) Component of a coating	(G) Polyamino, polyhydroxy polyether resin
P-02-0818	07/02/02	09/30/02	CBI	(G) Component of coating with open use	(G) Isocyanate amine adduct
P-02-0819	06/27/02	09/25/02	CBI	(G) Adhesives for open, non-dispersive use	(G) Polymer of alkylene polyester and methylenebis [isocyanatobenzene]
P-02-0820	06/27/02	09/25/02	CBI	(G) Adhesives for open, non-dispersive use	(G) Polymer of (alkylene ether)glycol, methylene bis[isocyanatobenzene] and toluene diisocyanate
P-02-0821	06/27/02	09/25/02	CBI	(G) Adhesives for open, non-dispersive use	(G) Polymer of (alkylene ether) glycol, methylene bis [isocyanatobenzene] and toluene diisocyanate

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 1 Test Marketing Exemption Notices Received From: 06/23/02 to 07/05/02

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-02-0009	07/02/02	08/16/02	CBI	(G) Component of coating with open use	(G) Isocyanate amine adduct

In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 16 Notices of Commencement From: 06/23/02 to 07/05/02

Case No.	Received Date	Commencement/Import Date	Chemical
P-02-0087	07/01/02	05/13/02	(S) Cyclopentanol, 2-cyclopentylidene
P-02-0089	06/26/02	06/07/02	(G) Alkyl silsesquioxane
P-02-0127	06/26/02	06/02/02	(S) 3-mercaptohexyl acetate
P-02-0185	07/02/02	06/07/02	(G) Aluminum chelate compound
P-02-0186	07/02/02	06/07/02	(G) Aluminum chelate compound
P-02-0216	06/25/02	06/14/02	(G) Diol
P-02-0311	06/25/02	05/25/02	(G) Acrylic copolymer
P-02-0312	07/02/02	05/30/02	(G) Poly(ester-ether)
P-02-0326	07/03/02	06/21/02	(S) Benzenamine, 2-nitro-4-(trifluoromethyl)-
P-02-0345	07/02/02	05/18/02	(G) Polyalkoxylated fatty acid
P-02-0367	07/02/02	06/11/02	(G) Polyalkoxylated phenol derivative
P-02-0377	06/25/02	06/13/02	(G) Polyamide
P-02-0450	06/27/02	06/21/02	(G) Polyether modified polyisocyanate, reaction product with diamine
P-02-0514	07/05/02	07/05/02	(G) Diethoxybenzenamine derivative, diazotized, coupled with aminonaphthalenesulfonic acid derivative, ammonium salt
P-96-0730	06/25/02	05/23/00	(G) Salt of a substituted alkylenepolyamine
P-97-0044	06/25/02	01/18/99	(G) Dibasic acid / glycol polyester, organic acid capped

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: July 17, 2002.

Sandra R. Wilkins,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.