2020-14600. Vessel Monitoring Systems; Requirements for Type-Approval of Cellular Transceiver Units  

  • Start Preamble

    AGENCY:

    National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce.

    ACTION:

    Final rule.

    SUMMARY:

    The U.S. Vessel Monitoring System (VMS) program type-approves enhanced mobile transceiver units (EMTUs) for use in U.S. fisheries. Currently, the only approved method for transferring VMS data from a vessel to NMFS is by satellite-linked communication services. This final rule amends the existing VMS type-approval regulations to add cellular-based EMTUs (EMTU-Cs) type-approval application and testing procedures; compliance and revocation processes; and technical, service, and performance standards. This rule is necessary to allow for the use of EMTU-Cs and cellular communication service, in addition to satellite-only models, in federally managed fisheries.

    DATES:

    The final rule will be effective August 7, 2020.

    ADDRESSES:

    Copies of the Final Regulatory Impact Review, Final Regulatory Flexibility Analysis and the information collection request submitted to the Office of Management and Budget (OMB) may be obtained at https://www.fisheries.noaa.gov/​topic/​enforcement#vessel-monitoring. Written comments regarding the burden-hour estimates or other aspects of the collection-of-information requirements contained in this final rule may be submitted to the NMFS Office of Law Enforcement, attention Kelly Spalding, 1315 East-West Highway, Silver Spring, MD 20910, or to OMB by email OIRA_Submission@omb.eop.gov.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Kelly Spalding, Vessel Monitoring System Program Manager, NMFS: 301-427-8269 or kelly.spalding@noaa.gov.

    End Further Info End Preamble Start Supplemental Information Start Printed Page 40916

    SUPPLEMENTARY INFORMATION:

    Background

    If Federal fishery regulations require use of VMS, fishing vessels must have a NMFS-approved EMTU (or mobile transmitter unit, although MTUs are no longer approved for new installations). EMTUs are affixed to fishing vessels as required by Federal regulations, and report GPS locations and potentially other fisheries information to NMFS. The EMTU allows the NMFS Office of Law Enforcement (OLE) to determine the geographic position of the vessel at specified intervals or during specific events, via satellite mobile communication services (MCSs). These satellite MCSs and EMTUs send data securely and at near real-time so that fisheries management and enforcement can monitor vessels' activity as it occurs.

    Fishermen must comply with applicable Federal fishery VMS regulations, and in doing so, may select from a variety of EMTU vendors that have been approved by NMFS to participate in the VMS program for specific fisheries. NMFS uses national VMS type-approval standards (50 CFR part 600, subpart Q) to approve an EMTU, including any installed software, and associated MCS, collectively referred to as a bundle, before they are authorized for use in federally managed fisheries (79 FR 77399, December 24, 2014).

    On October 26, 2018, NMFS published a proposed rule that would require owners and operators of recreational charter vessels and headboats (for-hire vessels) with Gulf of Mexico (Gulf) permits for reef fish or coastal migratory pelagic species to report GPS vessel location information to NMFS, among other management measures (83 FR 54069). NMFS approved an amendment to the fishery management plans associated with that proposed rule, and is nearing completion of a final rule to implement those requirements. The Gulf of Mexico Fishery Management Council determined that real-time satellite transmission is not necessary to meet the requirements for the Gulf for-hire reporting rule's vessel monitoring purposes and that cellular data transmission will be sufficient.

    NMFS seeks to accommodate the requirements for for-hire Gulf permit holders and to adapt to fishery monitoring trends while also maintaining type-approval standards that are equitably applied to all fisheries. So, in light of the above rule, this final rule modifies the existing NMFS VMS type-approval regulations to provide for type-approval of EMTU-Cs and allow VMS communications to be sent through secure cellular communication services. Having a single, codified type-approval process for satellite and cellular-based tracking devices will ensure the approval process is efficient, transparent, and enforceable for all approved devices nation-wide. Although the impetus for this rule was the Gulf proposed rule, this rule will apply nationally for type-approval of EMTU-Cs, if cellular-based VMS systems are adopted in other NMFS regions and monitoring programs.

    NMFS issued a proposed rule to provide for type-approval of EMTU-Cs on January 24, 2020 (85 FR 4257). The proposed rule provides further background on this rulemaking, which is not repeated here. Written comments on the proposed rule were received through February 24, 2020 through the Federal e-rulemaking portal, and are available for viewing in the docket for this rulemaking (see https://www.regulations.gov/​docket?​D=​NOAA-NMFS-2019-0126). In the following section, NMFS summarizes and responds to public comments received on the proposed rule.

    Changes From the Proposed Rule

    There are no changes from the proposed rule.

    Responses to Public Comments

    NMFS received seven public comments on the proposed rule.

    Comment 1. A commenter asked if solar-powered EMTU-Cs would be allowed in the VMS program in addition to cable-powered EMTU-Cs, and if so, suggested that solar panels would need to be kept sufficiently clean so as to ensure sufficient power.

    Response 1. Solar powered VMS units will be allowed in the NMFS Vessel Monitoring Program. NMFS will not regulate the type of power source for VMS units and will not regulate the proper care of solar panels used to power VMS units. NMFS does require that the unit operate properly and continuously, so cleaning the solar panel may be necessary in order for a fisherman to remain in compliance with VMS regulations.

    Comment 2. One commenter asked if there would be a requirement for EMTU-Cs to have an internal backup battery.

    Response 2. The NMFS VMS type-approval regulations do not require that any EMTU have an internal back-up battery. Regulations for fisheries that have a VMS requirement generally require that the VMS unit be operational for the duration of the fishing trip, and in some cases, even while in port. Because of these requirements, it is advisable that any EMTU always be connected to a reliable and continuous power source in order for a vessel to remain in compliance.

    Comment 3. A commenter asked if EMTU-C devices submitted to OLE will require prior Federal Communications Commission (FCC) certification.

    Response 3. NMFS does not enforce FCC requirements. If the FCC has set requirements for VMS units, then type-approval applicants and holders, and VMS vendors should ensure compliance with the FCC and with all other government requirements.

    Comment 4. Another commenter asked if NMFS will consider type approval for units that can serve both EMTU and EMTU-C end-users? In other words, a single device that is “dual band” in that it can be programmed to accommodate either cellular or satellite transmissions (or both, via least cost routing logic)?

    Response 4. If the VMS regulations applicable to a particular fishery allow for the use of store-and-forward reporting, then an EMTU, EMTU-C, or a hybrid of the two may be used (see definition of “Vessel Monitoring System (VMS) Unit” under § 600.1500).

    Comment 5. One commenter expressed concern that the rule, as proposed, would allow vessels to take infinite time to send position reports if they do not enter areas with cellular coverage.

    Response 5. The time frames for sending position reports in fisheries that require use of VMS and allow store-and-forward position reporting will be established in the VMS regulations applicable to that particular fishery. Type-approved VMS units will automatically send a vessel's stored VMS data once the VMS unit is in its cellular range, and fishermen will be responsible for ensuring that the VMS unit that they purchase has sufficient cellular coverage within their geographic fishing range.

    Comment 6. A commenter suggested that non-real time reporting/monitoring devices (store and forward position reporting) should not be limited to cellular-based systems. The commenter noted that satellite-based systems could significantly lower the cost of service if they are not required to report in real time (cost competitive with cellular, but with the advantage of global coverage) and that limiting all non-real time reporting to cellular-based systems would discourage future technological advancements by manufacturers of satellite-based systems and deny them the opportunity to compete.Start Printed Page 40917

    Response 6. We recognize that satellite-based VMS units are approved and can be used for store and forward services. If the VMS regulations applicable to a particular fishery allow for the use of store-and-forward reporting, then an EMTU, EMTU-C, or a hybrid of the two may be used (see definition of “Vessel Monitoring System (VMS) Unit” under § 600.1500).

    Comment 7. One commenter noted that in the proposed rule, 90 percent of all GPS position reports over a 24-hour period must reach the NMFS within 15 minutes of being transmitted by the EMTU-C (for 10 out of 11 consecutive days). However, fishermen may fish in areas with little or no cellular coverage for hours on end during any 24-hour period, making it difficult, if not impossible, to meet this requirement.

    Response 7. If a vessel fishes beyond the range of cellular service, the EMTU-C would still record and store position reports, but would not send them to NMFS until back within cellular service range. At that time, the latency requirement in this rule would be triggered: 90 Percent of position reports must be received within 15 minutes of being sent. This latency requirement is in addition to whatever fishery-specific regulations are applicable. Likely, VMS regulations for fisheries that allow use of cellular VMS units will require VMS data to be reported within a specified time before and/or after landing or coming in to port.

    Classification

    The NMFS Assistant Administrator has determined that this rule is consistent with the Magnuson-Stevens Act, and other applicable laws.

    Executive Order 12866

    This final rule has been determined to be not significant for purposes of Executive Order 12866.

    Executive Order 13771

    This final rule is considered an Executive Order 13771 deregulatory action.

    Regulatory Flexibility Act (RFA)

    A Final Regulatory Flexibility Analysis (FRFA) was prepared pursuant to 5 U.S.C. 604(a). The FRFA incorporates the Initial Regulatory Flexibility Analysis (IRFA), a summary of the significant issues raised by the public comments in response to the IRFA, NMFS's responses to those comments, and a summary of the analyses completed to support the action.

    The preamble to the proposed rule included a detailed summary of the analyses contained in the IRFA, and that discussion is not repeated here. The full FRFA is included below.

    The Magnuson-Stevens Act provides the statutory basis for this final rule. A description of this final rule, why it is being implemented, and the purpose of this final rule are contained in the SUMMARY and SUPPLEMENTARY INFORMATION sections of this final rule.

    The public did not submit any comments relating to the IRFA or to, in general, socio-economic implications, and no changes to this final rule were made as a result of public comment. No comments were received from the Office of Advocacy for the Small Business Administration (SBA).

    This final rule will directly apply to any companies that wish to obtain VMS type-approval for EMTU-Cs in the future. There are currently no EMTU-C units that have been type-approved by NMFS and no end users of such devices. NMFS received inquiries and quotes from six prospective telecommunications and/or computer and electronic product manufacturing companies within the past year expressing interest in seeking VMS type-approval for EMTU-Cs. Half of these are foreign companies based in either the United Kingdom or New Zealand. Because these foreign companies do not have a place of business located in the United States, do not operate primarily within the United States, or make a significant contribution to the U.S. economy through payment of taxes or use of American products, materials, or labor, they are not considered to be small businesses by the Small Business Administration (SBA) and only the effects on U.S. applicant companies will be discussed. One of the prospective U.S. companies is a publicly traded firm that primarily operates in the satellite telecommunications industry. The other two prospective U.S. applicant companies for EMTU-Cs are privately held businesses that do not publicly disclose total earnings or employment numbers. Based on information from their websites and product offerings, NMFS believes that one of them primarily operates in the radio and television broadcasting, and wireless communications equipment manufacturing industry, and the other primarily operates in the search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturing industry. It is not possible to estimate how many additional companies may enter the marketplace for NMFS approved EMTU-Cs in the future.

    It is important to note that this final rule will not be expected to affect the existing satellite-based EMTU type-approval process. Therefore, no impacts on current VMS type-approval holders or end users are anticipated.

    Additionally, this final rule will not directly apply to fishing businesses or end users of EMTU-C devices. This final rule may affect the availability of EMTU-Cs for purchase, the retail price of these devices, monthly service charges, and future replacement costs. However, these will all be indirect effects of this final rule. Consideration of indirect effects is outside the scope of the RFA and, therefore, only the effects on EMTU-C vendor companies will be discussed.

    The SBA has established size standards for all major industry sectors in the U.S. including satellite telecommunications businesses (NAICS code 517410), radio and television broadcasting and wireless communications equipment manufacturers (NAICS code 334220), and search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturers (NAICS 334511). A business primarily involved in the satellite telecommunications industry is classified as a small business if it is independently owned and operated, is not dominant in its field of operation (including its affiliates), and has combined annual receipts not in excess of $32.5 million for all its affiliated operations worldwide. A business primarily involved in the radio and television broadcasting and wireless communications equipment manufacturing industry is classified as a small business if it is independently owned and operated, is not dominant in its field of operation (including its affiliates), and employs 1,250 or fewer persons on a full-time, part-time, temporary, or other basis at all its affiliated operations worldwide. Finally, a business primarily involved in the search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturing industry is classified as a small business if it is independently owned and operated, is not dominant in its field of operation (including its affiliates), and employs 1,250 or fewer persons on a full-time, part-time, temporary, or other basis at all its affiliated operations worldwide.

    Based on financial records from a 2018 annual report to stockholders, NMFS has determined that the publicly traded U.S. vendor company that may be directly affected by this final rule will not be considered a small business under the SBA size criteria for its Start Printed Page 40918industry designation, the satellite telecommunications industry. NMFS conservatively assumes that the other two prospective U.S. vendor companies for EMTU-Cs that are believed to primarily operate in either the radio and television broadcasting, and wireless communications equipment manufacturing industry, or the search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturing industry are small entities. NMFS therefore estimates that this rule will impact at least two small entities in the short term and likely more in the long term.

    This final rule will involve reporting, record keeping, and other compliance requirements for the type-approval application process, notifications to NMFS for any substantive changes to type-approved EMTU-Cs or MCSs, customer service, potential responses to revocation notices or revocation appeals, and litigation support.

    The type-approval application process will require an applicant requesting type-approval of an EMTU-C, MCS, or bundle to make a written request to NMFS that must include the following information pertaining to the EMTU-C, MCS, or bundle: Communication class; manufacturer; brand name; model name; model number; software version and date; firmware version number and date; hardware version number and date; antenna type; antenna model number and date; tablet, monitor or terminal model number and date; MCS to be used in conjunction with the EMTU-C; entity providing MCS to the end user; current global and regional coverage of the MCS; the requestor-approved third party business entities associated with the EMTU-C and its use; the NMFS region(s) and/or Federal fisheries reporting program for which type-approval is sought; copies of, or citation to, applicable VMS regulations and requirements; communications functionality; position report data formats and transmission standards; latency specifications; messaging and electronic form capabilities; communications security specifications; details of customer service that will be provided to NMFS and fishermen; general durability and reliability of the unit; protection of PII, BII, and other protected information associated with the purchase or activation of an EMTU-C from disclosure; certification that the features, components, configuration, and services of the requestor's EMTU-C, MCS, or bundle comply with each applicable requirement set out in 50 CFR 600.1502 through 600.1509 and the applicable VMS regulations and requirements in effect for the NMFS region(s) and/or Federal fisheries reporting program for which the requestor seeks type-approval; and a certification that the requestor accepts responsibility for ensuring compliance with type-approval regulations during the type-approval period. In addition, the application must include two EMTU-Cs, loaded with forms and software if required by the applicable fishery(s), with activated MCS, at no cost to the government for each NMFS region or Federal fishery for which the application is made for a minimum of 90 calendar days for testing and evaluation. Two EMTU-Cs are needed for testing in each NMFS region or Federal fishery in order to quickly conduct in-office and field trials simultaneously. The application must also include thorough documentation, including EMTU-C fact sheets, installation guides, user manuals, any necessary interfacing software, MCS global and regional coverage, performance specifications, and technical support information. This application process will likely require engineering and product manager expertise for preparation of the application.

    The final rule will also require type-approval holders to notify NMFS within 2 calendar days of any substantive changes from the original submission for type-approval. Such change or modification notices will likely require engineering and product manager support as well.

    EMTU-C type-approval holders will be responsible for ensuring that customer service includes diagnostic and troubleshooting support to NMFS and fishermen, which is available 24 hours a day, 7 days per week, and year round. This may require dedicated customer service representative or technician support.

    If NMFS issues a Notification Letter indicating intent to revoke a type-approval, the type-approval holder must respond, in writing, within 30 to 120 calendar days from the date specified in the NMFS Notification Letter if they believe the notification is in error or can propose a solution to correct the issue. This response will likely require engineering and product manager expertise to develop. Additionally, a type-approval holder may file a petition to appeal a type-approval revocation, which could involve additional technical or legal support.

    Finally, as a condition of type-approval, the type-approval holder will be required to provide technical and expert support for litigation to substantiate the EMTU-C, MCS, or bundle capabilities to establish NMFS OLE cases against potential violators, as needed. If the technology has been subject to prior scrutiny in a court of law, the type-approval applicant or holder will be required to provide a brief summary of the litigation and any court finding on the reliability of the technology.

    The final rule will apply to all companies that wish to obtain VMS type-approval for EMTU-Cs in the future. As discussed previously, there are currently no EMTU-C units that have been type-approved by NMFS and no end users of such devices. However, three U.S. companies are expected to request type-approvals for EMTU-Cs. NMFS believes two of these companies are small entities. It is unknown how many additional companies may enter this market in the future. Because the majority of prospective applicant companies that are likely to be directly regulated by this final rule are believed to be small entities, NMFS conservatively assumes that this rule will affect a substantial number of small entities.

    All entities likely to be affected by this rule are expected to face comparable costs for the type-approval application process. Although detailed company information is not available for the small entities that will be directly regulated by this final rule, based on the nature of the products and services sold by these businesses, it is assumed they have the requisite resources to comply with most of the technical requirements included in this final rule as well. The requirement for customer service that is available 24 hours a day, 7 days per week, and year round will, however, have the potential to disproportionately burden small entities relative to large entities. This final rule may necessitate that small businesses hire dedicated customer service support staff. This increase in overhead costs could place them at a competitive disadvantage to large businesses that likely already have robust customer service resources. Small entities are typically not able to achieve the same economies of scale or scope as large entities. In other words, large entities are able to drive down overhead costs per unit by operating at higher levels of output or spreading overhead costs, such as customer service labor, across multiple products. This requirement may create a barrier to entry for small businesses that wish to participate in the EMTU-C market.

    The following information summarizes the expected direct effects of this final rule on small entities.Start Printed Page 40919

    Vessel Monitoring System Type-Approval Application Process

    Under this final rule, an applicant will need to submit a written type-approval request and electronic copies of supporting materials that include the information required under 50 CFR 600.1501 to NMFS OLE. The application process will likely require engineering and product manager expertise for preparation of the application. NMFS estimates that applicants will utilize up to approximately 40 hours of engineering labor and 40 hours of product management labor to compile the written request and statement that details how the applicant's EMTU-C meets the minimum national VMS standards as required by this rule. This estimate also includes the amount of time it will take to compile the EMTU-C documentation and the packaging of the EMTU-Cs to ship to each NMFS region or Federal fishery for which an application is submitted. Based on the Bureau of Labor Statistics May 2018 National Occupational Employment and Wage Estimates, the mean hourly wage for engineers is $47.71 per hour; for general and operations managers it is approximately $59.56 per hour. Therefore, NMFS estimates the total wage costs to be approximately $4,300 per EMTU-C application.

    With respect to providing OLE two EMTU-Cs for each NMFS region, NMFS estimates that applicants will likely spend between $55 and $86 per shipment (two units each) based on current United States Postal Service (USPS) ground shipping rates for a package of up to 30 pounds ($49.62-$80.51 depending on the region) and box/packaging costs of $5.00. Upon completion of testing and evaluation by OLE in each NMFS region, applicants will also be responsible for the cost of EMTU-C return shipments. Therefore, assuming an applicant sends units to all five NMFS regions, the total shipping cost per application will be $674 based on USPS ground delivery costs of approximately $50 per region in the continental United States and $81 per region for the Alaska and the Pacific Islands offices. The cost will be lower if type-approval is requested for fewer regions.

    In addition, applicants will be responsible for covering the costs of the MCS during the testing period. Using the average applicant quoted monthly service charge to customers, NMFS estimates that this could run approximately $25 per month per unit. Assuming a 90-day testing period for 10 units (2 sent to each NMFS region), the total MCS cost will be approximately $750. It will be less for requests that involve fewer regions.

    The average estimated retail price of an EMTU-C unit, as based on six different vendor quotes, is approximately $458. The applicant seeking type-approval will be unable to sell the EMTU-C units as new after providing them to NMFS for testing and evaluation for 90 days. They might only get 60 to 80 percent of the regular retail value on refurbished units. If 10 EMTU-Cs that regularly retail new for $458 each are sent to 5 regions, the reduced retail revenue will total approximately $916 to $1,832 per type-approval application. Again, if type-approval is requested for fewer than five regions, the cost will be lower. Alternatively, the applicant may opt to use these units as demo units for trade shows and other marketing purposes and therefore considerably lower the costs of providing the evaluation units. It is difficult to estimate the exact costs associated with providing the units to NMFS given the uncertainty associated with what applicants will do with these EMTU-Cs after the 90-day evaluation period.

    The total upper bound cost to applicants of the VMS type-approval application process is estimated to be $6,631 to $7,547 per application ($4,291 in wages, plus $674 in shipping, plus $750 in MCS charges, plus $916 to $1,832 in reduced retail revenue for the demo units). This cost will be lower if type-approval is requested for fewer than five regions.

    Changes or Modifications to Type-Approvals

    After a type-approval is issued, the type-approval holder must notify NMFS OLE in writing no later than 2 days following modification to or replacement of any functional component or piece of their type-approved EMTU-C, MCS, or bundle. If the changes are substantial, NMFS OLE will notify the type-approval holder in writing within 60 calendar days that an amended type-approval is required or that NMFS will initiate the type-approval revocation process. NMFS estimates that small entities will utilize up to approximately 4 hours of engineering labor and 4 hours of product management labor to notify NMFS of any substantive changes to the original type-approval submission and provide the agency with the details of those changes. NMFS estimates the total wage costs to be approximately $429 for the change notification process. NMFS estimates that there will likely be less than two change/modification notices submitted per year based on past experience. There were two change/modification notices submitted in 2017 for existing VMS type-approvals, as well as two in 2018. Therefore, the annual total cost to small entities for this provision will likely be less than $858 per year.

    Customer Service

    The type-approval holder will be responsible for ensuring that customer service includes: Diagnostic and troubleshooting support to NMFS and fishermen, which is available 24 hours a day, 7 days per week, and year round; response times for customer service inquiries that do not exceed 24 hours; warranty and maintenance agreements; escalation procedures for resolution of problems; established facilities and procedures to assist fishermen in maintaining and repairing their EMTU-C; assistance to fishermen in the diagnosis of the cause of communications anomalies; assistance in resolving communications anomalies that are traced to the EMTU-C; and assistance to NMFS OLE and its contractors, upon request, in VMS operation, resolving technical issues, and data analyses related to the VMS Program or system. NMFS is unable to estimate the direct costs to businesses to comply with these customer service requirements. However, they may be nontrivial. Costs will likely vary depending on each vendor's existing assets, liabilities, and profit maximization strategies.

    Revocation Process

    If at any time, a type-approved EMTU-C or bundle fails to meet requirements at 50 CFR 600.1502 through 600.1509 or applicable VMS regulations and requirements in effect for the region(s) and Federal fisheries for which the EMTU-C is type-approved, NMFS OLE may issue a Notification Letter to the type-approval holder that: Identifies the EMTU-C, MCS, or bundle that allegedly fails to comply with type-approval regulations and requirements; identifies the alleged failure to comply with type-approval regulations and requirements, and the urgency and impact of the alleged failure; cites relevant regulations and requirements under 50 CFR 600, subpart Q; describes the indications and evidence of the alleged failure; provides documentation and data demonstrating the alleged failure; sets a response date by which the type-approval holder must submit to NMFS OLE a written response to the Notification Letter, including, if applicable, a proposed solution; and explains the type-approval holder's options if the type-approval holder Start Printed Page 40920believes the Notification Letter is in error.

    NMFS will establish a response date between 30 and 120 calendar days from the date of the Notification Letter. The type-approval holder's response must be received in writing by NMFS on or before the response date. If the type-approval holder fails to respond by the response date, the type-approval will be revoked. At its discretion and for good cause, NMFS may extend the response date to a maximum of 150 calendar days from the date of the Notification Letter. A type-approval holder who has submitted a timely response may meet with NMFS within 21 calendar days of the date of that response to discuss a detailed and agreed-upon procedure for resolving the alleged failure. The meeting may be in person, conference call, or webcast.

    If the type-approval holder disagrees with the Notification Letter and believes that there is no failure to comply with the type-approval regulations and requirements, NMFS has incorrectly defined or described the failure or its urgency and impact, or NMFS is otherwise in error, the type-approval holder may submit a written objection letter to NMFS on or before the response date in accordance with 50 CFR 600.1512.

    NMFS estimates that the revocation process will potentially involve 16 hours of engineering labor and 8 hours of product management labor, per instance, to investigate the issues raised by NMFS and prepare a written response. Based on the wage costs previously discussed, NMFS estimates the revocation process could result in approximately $1,240 in labor costs. However, the actual amount of labor costs could vary considerably depending on the complexity of the issues causing the potential violations NMFS identified. Some vendors may decide not to challenge the revocation or may be unable to bring the issue to final resolution to NMFS' satisfaction and then face the revocation of the type-approval for their product. The vendor will then be impacted by the loss of future EMTU-C sales and monthly data communication fees from vessels required to carry and operate a type-approved EMTU-C, MCS, or bundle.

    The vendor could also opt to appeal the type-approval revocation. In addition to the costs associated with the engineering and product management support provided during the revocation process, the vendor may also decide to employ legal assistance to challenge the agency's decision. These costs could vary considerably depending on the complexity of the appeal arguments.

    Litigation Support

    Finally, in accordance with 50 CFR 600.1515, the final rule will also require the type-approval holder's litigation support. All technical aspects of a type-approved EMTU-C, MCS, or bundle are subject to being admitted as evidence in a court of law, if needed, and the type-approval holder will be required to provide technical and expert support for litigation to substantiate the EMTU-C, or bundle capabilities to establish NMFS OLE cases against violators. NMFS will pay the reasonable cost for such assistance in NMFS-authorized service or purchase agreements, work orders or contracts. If the technologies have previously been subject to such scrutiny in a court of law, the type-approval holder must provide NMFS with a brief summary of the litigation and any court findings on the reliability of the technology. This litigation support, if not fully paid for by NMFS, will be another potential cost of this final rule to EMTU-C vendors or mobile communications service providers. Because details of future litigation support needs are unknown, it is not possible to estimate these costs.

    In conclusion, participation in the EMTU-C market will be voluntary. It is assumed vendors are profit maximizing firms that will only apply for type-approvals if the expected profits from selling EMTU-C units and services justify the costs presented in this RFA analysis. However, there may be disproportionate effects on small entities relative to large entities, due to the customer service requirements included as part of this final rule.

    The following discussion describes the alternatives that were not selected as preferred by NMFS.

    Only two alternatives were considered for this rule. The first alternative, the no-action alternative, would not add EMTU-Cs and cellular based transmissions of VMS data to the VMS type-approval regulations. Currently there is no type-approval process for EMTU-Cs. This alternative was not selected by NMFS, because a type-approval process is required in order to facilitate the use of EMTU-Cs and cellular-based VMS transmissions in federally regulated fisheries that will require, or allow the use of, such in the future. Therefore, the no-action alternative was not a viable alternative. The second alternative, which includes all of the provisions laid out in this final rule, is the preferred alternative. NMFS has not identified any other alternatives that would meet the objectives of the final rule while minimizing economic impacts on small entities.

    Section 212 of the Small Business Regulatory Enforcement Fairness Act of 1996 states that, for each rule or group of related rules for which an agency is required to prepare a FRFA, the agency shall publish one or more guides to assist small entities in complying with the rule, and shall designate such publications as ‘small entity compliance guides.' The agency shall explain the actions a small entity is required to take to comply with a rule or group of rules. Copies of the compliance guide for this final rule are available (see ADDRESSES).

    Paperwork Reduction Act (PRA)

    This final rule contains collection-of-information requirements that have been submitted for approval to OMB under the PRA, Control Number 0648-0789, Type-Approval Requirements for Vessel Monitoring Systems. Public reporting burden for the application process is estimated to average 80 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection information.

    Public comment is sought regarding: Whether this collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; the accuracy of the burden estimate; ways to enhance the quality, utility, and clarity of the information to be collected; and ways to minimize the burden of the collection of information, including through the use of automated collection techniques or other forms of information technology. Send comments on these or any other aspects of the collection of information to NMFS OLE at the ADDRESSES above, or to OMB by email OIRA_Submission@omb.eop.gov.

    Notwithstanding any other provision of the law, no person is required to respond to, and no person shall be subject to penalty for failure to comply with, a collection of information subject to the requirements of the PRA, unless that collection of information displays a currently valid OMB control number. All currently approved collections of information may be viewed at http://www.cio.noaa.gov/​services_​programs/​prasubs.html.

    Start List of Subjects

    List of Subjects in 50 CFR Part 600

    • Administrative practice and procedure
    • Fisheries
    • Fishing
    • Reporting and recordkeeping requirements
    End List of Subjects Start Signature
    Start Printed Page 40921

    Dated: June 29, 2020.

    Christopher Wayne Oliver,

    Assistant Administrator for Fisheries, National Marine Fisheries Service.

    End Signature

    For the reasons set out in the preamble, 50 CFR part 600 is amended as follows:

    Start Part

    PART 600—MAGNUSON-STEVENS ACT PROVISIONS

    End Part Start Amendment Part

    1. The authority citation for part 600 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 5 U.S.C. 561 and 16 U.S.C. 1801 et seq.

    End Authority Start Amendment Part

    2. Revise subpart Q to part 600 to read as follows:

    End Amendment Part

    Subpart Q—Vessel Monitoring System Type-Approval

    Sec.
    600.1500
    Definitions and acronyms.
    600.1501
    Vessel Monitoring System type-approval process.
    600.1502
    Communications functionality.
    600.1503
    Position report data formats and transmission.
    600.1504
    Latency requirement.
    600.1505
    Messaging.
    600.1506
    Electronic forms.
    600.1507
    Communications security.
    600.1508
    Customer service.
    600.1509
    General.
    600.1510
    Notification of type-approval.
    600.1511
    Changes or modifications to type-approvals.
    600.1512
    Type-approval revocation process.
    600.1513
    Type-approval revocation appeals process.
    600.1514
    Revocation effective date and notification to vessel owners.
    600.1515
    Litigation support.
    600.1516
    Reimbursement opportunities for revoked Vessel Monitoring System type-approval products.
    Definitions and acronyms.

    In addition to the definitions in the Magnuson-Stevens Act and in § 600.10, and the acronyms in § 600.15, the terms and acronyms in this subpart have the following meanings:

    Authorized entity means a person, defined at 16 U.S.C. 1802(36), authorized to receive data transmitted by a VMS unit.

    Bench configuration means the configuration of a VMS unit after it has been customized to meet the Federal VMS requirements.

    Bundle means a mobile communications service and VMS unit sold as a package and considered one product. If a bundle is type-approved, the requestor will be the type-approval holder for the bundled MCS and VMS unit.

    Cellular communication means the wireless transmission of VMS data via a cellular network.

    Communication class means the satellite or cellular communications operator from which communications services originate.

    Electronic form means a pre-formatted message transmitted by a VMS unit that is required for the collection of data for a specific fishery program (e.g., declaration system, catch effort reporting).

    Enhanced Mobile Transceiver Unit (EMTU) means a type of MTU that is capable of supporting two-way communication, messaging, and electronic forms transmission via satellite. An EMTU is a transceiver or communications device, including an antenna, and dedicated message terminal and display which can support a dedicated input device such as a tablet or keyboard, installed on fishing vessels participating in fisheries with a VMS requirement.

    Enhanced Mobile Transceiver Unit, Cellular Based (EMTU-C) means an EMTU that transmits and receives data via cellular communications, except that it may not need a dedicated message terminal and display component at the time of approval as explained at § 600.1502(a)(6). An EMTU-C only needs to be capable of transmission and reception when in the range of a cellular network.

    Latency means the state of untimely delivery of Global Positioning System position reports and electronic forms to NMFS (i.e., information is not delivered to NMFS consistent with timing requirements of this subpart).

    Mobile Communications Service (MCS) means the satellite and/or cellular communications services used with particular VMS units.

    Mobile Communications Service Provider (MCSP) means an entity that sells VMS satellite and/or cellular communications services to end users.

    Mobile Transmitter Unit (MTU) means a VMS unit capable of transmitting Global Positioning System position reports via satellite. (MTUs are no longer approved for new installations on VMS vessels).

    Notification Letter means a letter issued by NMFS to a type-approval holder identifying an alleged failure of a VMS unit, MCS, or the type-approval holder to comply with the requirements of this subpart.

    Position report means the unique global positioning system (GPS) report generated by a vessel's VMS unit, which identifies the vessel's latitude/longitude position at a point in time. Position reports are sent from the VMS unit via the MCS, to authorized entities.

    Requestor means a vendor seeking type-approval.

    Service life means the length of time during which a VMS unit remains fully operational with reasonable repairs.

    Sniffing means the unauthorized and illegitimate monitoring and capture, through use of a computer program or device, of data being transmitted over a network.

    Spoofing means the reporting of a false Global Positioning System position and/or vessel identity.

    Time stamp means the time, in hours, minutes, and seconds in a position report. Each position report is time stamped.

    Type-approval holder means an applicant whose type-approval request has been approved pursuant to this subpart.

    Vendor means a commercial provider of VMS hardware, software, and/or mobile communications services.

    Vessel Monitoring System (VMS) means, for purposes of this subpart, a satellite and/or cellular based system designed to monitor the location and movement of vessels using onboard VMS units that send Global Positioning System position reports to an authorized entity.

    Vessel Monitoring System (VMS) data means the data transmitted to authorized entities from a VMS unit.

    Vessel Monitoring System Program means the Federal program that manages the vessel monitoring system, data, and associated program-components, nationally and in each NMFS region; it is housed in the Department of Commerce, National Oceanic and Atmospheric Administration, National Marine Fisheries Service's Office of Law Enforcement.

    Vessel Monitoring System (VMS) Unit means MTU, EMTU or EMTU-C, as well as the units that can operate as both an EMTU and an EMTU-C.

    Vessel Monitoring System (VMS) Vessels means vessels that operate in federally managed fisheries with a requirement to carry and operate a VMS unit.

    Vessel Monitoring System type-approval process.

    (a) Applicability. Unless otherwise specified, this section applies to EMTUs, EMTU-Cs, units that operate as both an EMTU and EMTU-C, and MCSs. Units that can operate as both an EMTU and EMTU-C must meet the requirements for both an EMTU and an EMTU-C in order to gain type-approval as both. MTUs are no longer eligible for type-approval.

    (b) Application submission. A requestor must submit a written type-approval request and electronic copies Start Printed Page 40922of supporting materials that include the information required under this section to the NMFS Office of Law Enforcement (OLE) at: U.S. Department of Commerce; National Oceanic and Atmospheric Administration; National Marine Fisheries Service; Office of Law Enforcement; Attention: Vessel Monitoring System Office; 1315 East-West Highway, SSMC3, Suite 3301, Silver Spring, Maryland 20910.

    (c) Application requirements. (1) EMTU, EMTU-C, and MCS Identifying Information: In a type-approval request, the requestor should indicate whether the requestor is seeking approval for an EMTU, EMTU-C, MCS, or bundle and must specify identifying characteristics, as applicable: Communication class; manufacturer; brand name; model name; model number; software version and date; firmware version number and date; hardware version number and date; antenna type; antenna model number and date; tablet, monitor or terminal model number and date; MCS to be used in conjunction with the EMTU/EMTU-C; entity providing MCS to the end user; and current global and regional coverage of the MCS.

    (2) Requestor-approved third party business entities: The requestor must provide the business name, address, phone number, contact name(s), email address, specific services provided, and geographic region covered for the following third party business entities:

    (i) Entities providing bench configuration for the EMTU/EMTU-C at the warehouse or point of supply.

    (ii) Entities distributing/selling the EMTU/EMTU-C to end users.

    (iii) Entities currently approved by the requestor to install the EMTU/EMTU-C onboard vessels.

    (iv) Entities currently approved by the requestor to offer a limited warranty.

    (v) Entities approved by the requestor to offer a maintenance service agreement.

    (vi) Entities approved by the requestor to repair or install new software on the EMTU/EMTU-C.

    (vii) Entities approved by the requestor to train end users.

    (viii) Entities approved by the requestor to advertise the EMTU/EMTU-C.

    (ix) Entities approved by the requestor to provide other customer services.

    (3) Regulatory Requirements and Documentation: In a type-approval request, a requestor must:

    (i) Identify the NMFS region(s) and/or Federal fisheries for which the requestor seeks type-approval.

    (ii) Include copies of, or citation to, applicable VMS regulations and requirements in effect for the region(s) and Federal fisheries identified under paragraph (c)(3)(i) of this section that require use of VMS.

    (iii) Provide a table with the type-approval request that lists in one column each requirement set out in §§ 600.1502 through 600.1509 and regulations described under paragraph (c)(3)(ii) of this section. NMFS OLE will provide a template for the table upon request. The requestor must indicate in subsequent columns in the table:

    (A) Whether the requirement applies to the type-approval; and

    (B) Whether the EMTU, EMTU-C, MCS, or bundle meets the requirement.

    (iv) Certify that the features, components, configuration and services of the requestor's EMTU/EMTU-C, MCS, or bundle comply with each requirement set out in §§ 600.1502 through 600.1509 and the regulations described under paragraph (c)(3)(ii) of this section.

    (v) Certify that, if the request is approved, the requestor agrees to be responsible for ensuring compliance with each requirement set out in §§ 600.1502 through 600.1509 and the regulations described under paragraph (c)(3)(ii) of this section over the course of the type-approval period.

    (vi) Provide NMFS OLE with two EMTU/EMTU-Cs loaded with forms and software, if applicable, for each NMFS region or Federal fishery, with activated MCS, for which a type-approval request is submitted for a minimum of 90 calendar days for testing and evaluation. For EMTU-Cs, the forms and software may be loaded onto a dedicated message terminal and display component to which the EMTU-C can connect. Copies of forms currently used by NMFS are available upon request. As part of its review, NMFS OLE may perform field tests and at-sea trials that involve demonstrating every aspect of EMTU/EMTU-C and communications operation. The requestor is responsible for all associated costs including paying for: Shipping of the EMTU/EMTU-C to the required NMFS regional offices and/or headquarters for testing; the MCS during the testing period; and shipping of the EMTU/EMTU-C back to the vendor.

    (vii) Provide thorough documentation for the EMTU/EMTU-C and MCS, including: EMTU/EMTU-C fact sheets; installation guides; user manuals; any necessary interfacing software; MCS global and regional coverage; performance specifications; and technical support information.

    (d) Certification. A requestor seeking type-approval of an EMTU/EMTU-C to operate with a class or type of communications, as opposed to type-approval for use with a specific MCS, shall certify that the EMTU/EMTU-C meets requirements under this subpart when using at least one MCSP within that class or type of communications.

    (e) Notification. Unless additional time is required for EMTU/EMTU-C testing, NMFS OLE will notify the requestor within 90 days after receipt of a complete type-approval request as follows:

    (1) If a request is approved or partially approved, NMFS OLE will provide notice as described under § 600.1510 and the type-approval letter will serve as official documentation and notice of type-approval. OLE will publish and maintain the list of type-approved units on their Vessel Monitoring System web page.

    (2) If a request is disapproved or partially disapproved:

    (i) OLE will send a letter to the requestor that explains the reason for the disapproval/partial disapproval.

    (ii) The requestor may respond to NMFS OLE in writing with additional information to address the reasons for disapproval identified in the NMFS OLE letter. The requestor must submit this response within 21 calendar days of the date of the OLE letter sent under paragraph (e)(2)(i) of this section.

    (iii) If any additional information is submitted under paragraph (e)(2)(ii) of this section, NMFS OLE, after reviewing such information, may either take action under paragraph (e)(1) of this section or determine that the request should continue to be disapproved or partially disapproved. In the latter case, the NMFS OLE Director will send a letter to the requestor that explains the reasons for the continued disapproval/partial disapproval. The NMFS OLE Director's decision is final upon issuance of this letter and is not appealable.

    Communications functionality.

    (a) Unless otherwise specified, this subsection applies to all VMS units. Units that can operate as both an EMTU and EMTU-C must meet the requirements for both an EMTU and an EMTU-C in order to gain type-approval as both. The VMS unit must:

    (1) Be able to transmit all automatically-generated position reports.

    (2) Provide visible or audible alarms onboard the vessel to indicate malfunctioning of the VMS unit.

    (3) Be able to disable non-essential alarms in non-Global Maritime Distress and Safety System (GMDSS) installations.

    (4) EMTU/EMTU-Cs must be able to send communications that function uniformly throughout the geographic Start Printed Page 40923area(s) covered by the type-approval, except an EMTU-C only needs to be capable of transmission and reception when in the range of a cellular network.

    (5) EMTU/EMTU-Cs must have two-way communications between the unit and authorized entities, via MCS, or be able to connect to a device that has two-way communications.

    (6) EMTU/EMTU-Cs must be able to run or to connect to a dedicated message terminal and display component that can run software and/or applications that send and receive electronic forms and internet email messages for the purpose of complying with VMS reporting requirements in Federal fisheries. Depending on the reporting requirements for the fishery(s) in which the requester is seeking type-approval, an EMTU-C type-approval may not require the inclusion of a dedicated message terminal and display component at the time of approval, but the capability to support such a component must be shown.

    (7) Have messaging and communications mechanisms that are completely compatible with NMFS vessel monitoring and surveillance software.

    (b) In addition, messages and communications from a VMS unit must be able to be parsed out to enable clear billing of costs to the government and to the owner of a vessel or EMTU/EMTU-C, when necessary. Also, the costs associated with position reporting and the costs associated with other communications (for example, personal email or communications/reports to non-NMFS Office of Law Enforcement entities) must be parsed out and billed to separate parties, as appropriate.

    Position report data formats and transmission.

    Unless otherwise specified, this subsection applies to all VMS units, MCSs and bundles. Units that can operate as both an EMTU and EMTU-C must meet the requirements for both an EMTU and an EMTU-C in order to gain type-approval as both. To be type-approved in any given fishery, a VMS unit must also meet any additional positioning information as required by the applicable VMS regulations and requirements in effect for each fishery or region for which the type-approval applies. The VMS unit must meet the following requirements:

    (a) Transmit all automatically-generated position reports, for vessels managed individually or grouped by fleet, that meet the latency requirement under § 600.1504.

    (b) When powered up, must automatically re-establish its position reporting function without manual intervention.

    (c) Position reports must contain all of the following:

    (1) Unique identification of an EMTU/EMTU-C and clear indication if the unit is an EMTU-C.

    (2) Date (year/month/day with century in the year) and time stamp (GMT) of the position fix.

    (3) Date (year/month/day with century in the year) and time stamp (GMT) that the EMTU-C position report was sent from the EMTU-C.

    (4) Position fixed latitude and longitude, including the hemisphere of each, which comply with the following requirements:

    (i) The position fix precision must be to the decimal minute hundredths.

    (ii) Accuracy of the reported position must be within 100 meters (328.1 ft).

    (d) An EMTU/EMTU-C must have the ability to: (1) Store 1,000 position fixes in local, non-volatile memory.

    (2) Allow for defining variable reporting intervals between 5 minutes and 24 hours.

    (3) Allow for changes in reporting intervals remotely and only by authorized users.

    (e) An EMTU/EMTU-C must generate specially identified position reports upon:

    (1) Antenna disconnection.

    (2) Loss of positioning reference signals.

    (3) Security events, power-up, power down, and other status data.

    (4) A request for EMTU/EMTU-C status information such as configuration of programming and reporting intervals.

    (5) The EMTUs loss of the mobile communications signals.

    (6) An EMTU must generate a specially identified position report upon the vessel crossing of a pre-defined geographic boundary.

    Latency requirement.

    (a) Ninety percent of all pre-programmed or requested Global Positioning System position reports during each 24-hour period must reach NMFS within 15 minutes or less of being sent from the VMS unit, for 10 out of 11 consecutive days (24-hour time periods).

    (b) NMFS will continually examine latency by region and by type-approval holder.

    (c) Exact dates for calculation of latency will be chosen by NMFS. Days in which isolated and documented system outages occur will not be used by NMFS to calculate a type-approval holder's latency.

    Messaging.

    (a) Unless otherwise specified, this section applies to all VMS units, MCSs, and bundles. Units that can operate as both an EMTU and EMTU-C must meet the requirements for both an EMTU and an EMTU-C in order to gain type-approval as both. Depending on the reporting requirements for the fishery(s) in which the requester is seeking type-approval, an EMTU-C type-approval may not require the inclusion of a dedicated message terminal and display component at the time of approval, but the capability to support such a component must be shown. To be type-approved in any given fishery, a VMS unit must meet messaging information requirements under the applicable VMS regulations and requirements in effect for each fishery or region for which the type-approval applies. The VMS unit must also meet the following requirements:

    (b) An EMTU must be able to run software and/or applications that send email messages for the purpose of complying with VMS reporting requirements in Federal fisheries that require email communication capability. An EMTU-C must be able to run or connect to a device that can run such software and/or applications. In such cases, the EMTU/EMTU-C messaging must provide for the following capabilities:

    (1) Messaging from vessel to shore, and from shore to vessel by authorized entities, must have a minimum supported message length of 1 KB. For EMTU-Cs, this messaging capability need only be functional when in range of shore-based cellular communications.

    (2) There must be a confirmation of delivery function that allows a user to ascertain whether a specific message was successfully transmitted to the MCS email server(s).

    (3) Notification of failed delivery to the EMTU/EMTU-C must be sent to the sender of the message. The failed delivery notification must include sufficient information to identify the specific message that failed and the cause of failure (e.g., invalid address, EMTU/EMTU-C switched off, etc.).

    (4) The EMTU/EMTU-C must have an automatic retry feature in the event that a message fails to be delivered.

    (5) The EMTU/EMTU-C user interface must:

    (i) Support an “address book” capability and a function permitting a “reply” to a received message without re-entering the sender's address.

    (ii) Provide the ability to review by date order, or by recipient, messages that were previously sent. The EMTU/EMTU-C terminal must support a Start Printed Page 40924minimum message history of 50 sent messages—commonly referred to as an “Outbox” or “Sent” message display.

    (iii) Provide the ability to review by date order, or by sender, all messages received. The EMTU/EMTU-C terminal must support a minimum message history of at least 50 messages in an inbox.

    Electronic forms.

    Unless otherwise specified, this subsection applies to all EMTUs, EMTU-Cs, MCSs, and bundles.

    (a) Forms. An EMTU/EMTU-C must be able to run, or to connect to and transmit data from a device that can run electronic forms software. Depending on the reporting requirements for the fishery(s) in which the requester is seeking type-approval, an EMTU-C type-approval may not require the inclusion of a dedicated message terminal and display component at the time of approval, but the capability to support such a component must be shown. The EMTU/EMTU-C must be able to support forms software that can hold a minimum of 20 electronic forms, and it must also meet any additional forms requirements in effect for each fishery or region for which the type-approval applies. The EMTU/EMTU-C must meet the following requirements:

    (1) Form Validation: Each field on a form must be capable of being defined as Optional, Mandatory, or Logic Driven. Mandatory fields are those fields that must be entered by the user before the form is complete. Optional fields are those fields that do not require data entry. Logic-driven fields have their attributes determined by earlier form selections. Specifically, a logic-driven field must allow for selection of options in that field to change the values available as menu selections on a subsequent field within the same form.

    (2) A user must be able to select forms from a menu on the EMTU/EMTU-C.

    (3) A user must be able to populate a form based on the last values used and “modify” or “update” a prior submission without unnecessary re-entry of data. A user must be able to review a minimum of 20 past form submissions and ascertain for each form when the form was transmitted and whether delivery was successfully sent to the type-approval holder's VMS data processing center. In the case of a transmission failure, a user must be provided with details of the cause and have the opportunity to retry the form submission.

    (4) VMS Position Report: Each form must include VMS position data, including latitude, longitude, date and time. Data to populate these fields must be automatically generated by the EMTU/EMTU-C and unable to be manually entered or altered.

    (5) Delivery and Format of Forms Data: Delivery of form data to NMFS must employ the same transport security and reliability as set out in § 600.1507 of this subpart. The forms data and delivery must be completely compatible with NMFS vessel monitoring software.

    (b) Updates to Forms. (1) The EMTU/EMTU-C and MCS must be capable of providing updates to forms or adding new form requirements via wireless transmission and without manual installation.

    (2) From time to time, NMFS may provide type-approved applicants with requirements for new forms or modifications to existing forms. NMFS may also provide notice of forms and form changes through the NMFS Work Order System. Type-approved applicants will be given at least 60 calendar days to complete their implementation of new or changed forms. Applicants will be capable of, and responsible for translating the requirements into their EMTU/EMTU-C-specific forms definitions and wirelessly transmitting the same to all EMTU/EMTU-C terminals supplied to fishing vessels.

    Communications security.

    Communications between an EMTU/EMTU-C and MCS must be secure from tampering or interception, including the reading of passwords and data. The EMTU/EMTU-C and MCS must have mechanisms to prevent to the extent possible:

    (a) Sniffing and/or interception during transmission from the EMTU/EMTU-C to MCS.

    (b) Spoofing.

    (c) False position reports sent from an EMTU/EMTU-C.

    (d) Modification of EMTU/EMTU-C identification.

    (e) Interference with Global Maritime Distress and Safety System (GMDSS) or other safety/distress functions.

    (f) Introduction of malware, spyware, keyloggers, or other software that may corrupt, disturb, or disrupt messages, transmission, and the VMS system.

    (g) The EMTU/EMTU-C terminal from communicating with, influencing, or interfering with the Global Positioning System antenna or its functionality, position reports, or sending of position reports. The position reports must not be altered, corrupted, degraded, or at all affected by the operation of the terminal or any of its peripherals or installed-software.

    (h) VMS data must be encrypted and sent securely through all associated cellular, satellite, and internet communication pathways and channels.

    Field and Technical Services.

    As a requirement of its type-approval, a type-approval holder must communicate with NMFS to resolve technical issues with a VMS Unit, MCS or bundle and ensure that field and technical services includes:

    (a) Diagnostic and troubleshooting support to NMFS and fishers, which is available 24 hours a day, seven days per week, and year-round.

    (b) Response times for customer service inquiries that shall not exceed 24 hours.

    (c) Warranty and maintenance agreements.

    (d) Escalation procedures for resolution of problems.

    (e) Established facilities and procedures to assist fishers in maintaining and repairing their EMTU, EMTU-C, or MTU.

    (f) Assistance to fishers in the diagnosis of the cause of communications anomalies.

    (g) Assistance in resolving communications anomalies that are traced to the EMTU, EMTU-C, or MTU.

    (h) Assistance to NMFS Office of Law Enforcement and its contractors, upon request, in VMS system operation, resolving technical issues, and data analyses related to the VMS Program or system.

    General.

    (a) An EMTU/EMTU-C must have the durability and reliability necessary to meet all requirements of §§ 600.1502 through 600.1507 regardless of weather conditions, including when placed in a marine environment where the unit may be subjected to saltwater (spray) in smaller vessels, and in larger vessels where the unit may be maintained in a wheelhouse. The unit, cabling and antenna must be resistant to salt, moisture, and shock associated with sea-going vessels in the marine environment.

    (b) PII and Other Protected Information. Personally identifying information (PII) and other protected information includes Magnuson-Stevens Act confidential information as provided at 16 U.S.C. 1881a and Business Identifiable Information (BII), as defined in the Department of Commerce Information Technology Privacy Policy. A type-approval holder is responsible for ensuring that:

    (1) All PII and other protected information is handled in accordance with applicable state and Federal law.Start Printed Page 40925

    (2) All PII and other protected information provided to the type-approval holder by vessel owners or other authorized personnel for the purchase or activation of an EMTU/EMTU-C or arising from participation in any Federal fishery are protected from disclosure not authorized by NMFS or the vessel owner or other authorized personnel.

    (3) Any release of PII or other protected information beyond authorized entities must be requested and approved in writing, as appropriate, by the submitter of the data in accordance with 16 U.S.C. 1881a, or by NMFS.

    (4) Any PII or other protected information sent electronically by the type-approval holder to the NMFS Office of Law Enforcement must be transmitted by a secure means that prevents interception, spoofing, or viewing by unauthorized individuals.

    Notification of type-approval.

    (a) If a request made pursuant to § 600.1501 (type-approval) is approved or partially approved, NMFS will issue a type-approval letter to indicate the specific EMTU/EMTU-C model, MCSP, or bundle that is approved for use, the MCS or class of MCSs permitted for use with the type-approved EMTU, and the regions or fisheries in which the EMTU/EMTU-C, MCSP, or bundle is approved for use.

    (b) The NMFS Office of Law Enforcement will maintain a list of type-approved EMTUs/EMTU-C, MCSPs, and bundles on a publicly available website and provide copies of the list upon request.

    Changes or modifications to type-approvals.

    Type-approval holders must notify NMFS Office of Law Enforcement (OLE) in writing no later than 2 days following modification to or replacement of any functional component or piece of their type-approved EMTU, EMTU-C, or MTU configuration, MCS, or bundle. If the changes are substantial, NMFS OLE will notify the type-approval holder in writing within 60 calendar days that an amended type-approval is required or that NMFS will initiate the type-approval revocation process.

    Type-approval revocation process.

    (a) If at any time, a type-approved EMTU/EMTU-C, MCS, or bundle fails to meet requirements at §§ 600.1502 through 600.1509 or applicable VMS regulations and requirements in effect for the region(s) and Federal fisheries for which the EMTU/EMTU-C or MCS is type-approved, or if an MTU fails to meet the requirements under which it was type-approved, OLE may issue a Notification Letter to the type-approval holder that:

    (1) Identifies the MTU, EMTU, EMTU-C, MCS, or bundle that allegedly fails to comply with type-approval regulations and requirements;

    (2) Identifies the alleged failure to comply with type-approval regulations and requirements, and the urgency and impact of the alleged failure;

    (3) Cites relevant regulations and requirements under this subpart;

    (4) Describes the indications and evidence of the alleged failure;

    (5) Provides documentation and data demonstrating the alleged failure;

    (6) Sets a response date by which the type-approval holder must submit to NMFS OLE a written response to the Notification Letter, including, if applicable, a proposed solution; and

    (7) Explains the type-approval holder's options if the type-approval holder believes the Notification Letter is in error.

    (b) NMFS will establish a response date between 30 and 120 calendar days from the date of the Notification Letter. The type-approval holder's response must be received in writing by NMFS on or before the response date. If the type-approval holder fails to respond by the response date, the type-approval will be revoked. At its discretion and for good cause, NMFS may extend the response date to a maximum of 150 calendar days from the date of the Notification Letter.

    (c) A type-approval holder who has submitted a timely response may meet with NMFS within 21 calendar days of the date of that response to discuss a detailed and agreed-upon procedure for resolving the alleged failure. The meeting may be in person, conference call, or webcast.

    (d) If the type-approval holder disagrees with the Notification Letter and believes that there is no failure to comply with the type-approval regulations and requirements, NMFS has incorrectly defined or described the failure or its urgency and impact, or NMFS is otherwise in error, the type-approval holder may submit a written objection letter to NMFS on or before the response date. Within 21 calendar days of the date of the objection letter, the type-approval holder may meet with NMFS to discuss a resolution or redefinition of the issue. The meeting may be in person, conference call, or webcast. If modifications to any part of the Notification Letter are required, then NMFS will issue a revised Notification Letter to the type-approval holder. However, the response date or any other timeline in this process would not restart or be modified unless NMFS decides to do so, at its discretion.

    (e) The total process from the date of the Notification Letter to the date of final resolution should not exceed 180 calendar days, and may require a shorter timeframe, to be determined by NMFS, depending on the urgency and impact of the alleged failure. In rare circumstances, NMFS, at its discretion, may extend the time for resolution of the alleged failure. In such a case, NMFS will provide a written notice to the type-approval holder informing him or her of the extension and the basis for the extension.

    (f) If the failure to comply with type-approval regulations and requirements cannot be resolved through this process, the NMFS OLE Director will issue a Revocation Letter to the type-approval holder that:

    (1) Identifies the MTU, EMTU, EMTU-C, MCS, or bundle for which type-approval is being revoked;

    (2) Summarizes the failure to comply with type-approval regulations and requirements, including describing its urgency and impact;

    (3) Summarizes any proposed plan, or attempts to produce such a plan, to resolve the failure;

    (4) States that revocation of the MTU, EMTU, EMTU-C, MCS, or bundle's type-approval has occurred;

    (5) States that no new installations of the revoked unit will be permitted in any NMFS-managed fishery requiring the use of VMS;

    (6) Cites relevant regulations and requirements under this subpart;

    (7) Explains why resolution was not achieved;

    (8) Advises the type-approval holder that:

    (i) The type-approval holder may reapply for a type-approval under the process set forth in § 600.1501, and

    (ii) A revocation may be appealed pursuant to the process under § 600.1513.

    Type-approval revocation appeals process.

    (a) If a type-approval holder receives a Revocation Letter pursuant to § 600.1512, the type-approval holder may file an appeal of the revocation to the NMFS Assistant Administrator.

    (b) An appeal must be filed within 14 calendar days of the date of the Revocation Letter. A type-approval holder may not request an extension of time to file an appeal.

    (c) An appeal must include a complete copy of the Revocation Letter and its attachments and a written statement detailing any facts or Start Printed Page 40926circumstances explaining and refuting the failures summarized in the Revocation Letter.

    (d) The NMFS Assistant Administrator may, at his or her discretion, affirm, vacate, or modify the Revocation Letter and send a letter to the type-approval holder explaining his or her determination, within 21 calendar days of receipt of the appeal. The NMFS Assistant Administrator's determination constitutes the final agency decision.

    Revocation effective date and notification to vessel owners.

    (a) Following issuance of a Revocation Letter pursuant to § 600.1512 and any appeal pursuant to § 600.1513, NMFS will provide notice to all vessel owners impacted by the type-approval revocation via letter and Federal Register notice. NMFS will provide information to impacted vessel owners on:

    (1) The next steps vessel owners should take to remain in compliance with regional and/or national VMS requirements;

    (2) The date, 60-90 calendar days from the notice date, on which the type-approval revocation will become effective;

    (3) Reimbursement of the cost of a new type-approved EMTU/EMTU-C, should funding for reimbursement be available pursuant to § 600.1516.

    Litigation support.

    (a) All technical aspects of a type-approved EMTU, EMTU-C, MTU, MCS, or bundle are subject to being admitted as evidence in a court of law, if needed. The reliability of all technologies utilized in the EMTU, EMTU-C, MTU, MCS, or bundle may be analyzed in court for, inter alia, testing procedures, error rates, peer review, technical processes and general industry acceptance.

    (b) The type-approval holder must, as a requirement of the holder's type-approval, provide technical and expert support for litigation to substantiate the EMTU/EMTU-C, MCS, or bundle capabilities to establish NMFS Office of Law Enforcement cases against violators, as needed. If the technologies have previously been subject to such scrutiny in a court of law, the type-approval holder must provide NMFS with a brief summary of the litigation and any court findings on the reliability of the technology.

    (c) The type-approval holder will be required to sign a non-disclosure agreement limiting the release of certain information that might compromise the effectiveness of the VMS operations.

    Reimbursement opportunities for revoked Vessel Monitoring System type-approval products.

    (a) Subject to the availability of funds, vessel owners may be eligible for reimbursement payments for a replacement EMTU/EMTU-C if:

    (1) All eligibility and process requirements specified by NMFS are met as described in NMFS Policy Directive 06-102; and

    (2) The replacement type-approved EMTU/EMTU-C is installed on the vessel, and reporting to NMFS Office of Law Enforcement; and

    (3) The type-approval for the previously installed EMTU/EMTU-C has been revoked by NMFS; or

    (4) NMFS requires the vessel owner to purchase a new EMTU/EMTU-C prior to the end of an existing unit's service life.

    (b) The cap for individual reimbursement payments is subject to change. If this occurs, NMFS Office of Law Enforcement will publish a notice in the Federal Register announcing the change.

    End Supplemental Information

    [FR Doc. 2020-14600 Filed 7-7-20; 8:45 am]

    BILLING CODE 3510-22-P

Document Information

Effective Date:
8/7/2020
Published:
07/08/2020
Department:
National Oceanic and Atmospheric Administration
Entry Type:
Rule
Action:
Final rule.
Document Number:
2020-14600
Dates:
The final rule will be effective August 7, 2020.
Pages:
40915-40926 (12 pages)
Docket Numbers:
Docket No. 200626-0173
RINs:
0648-BJ15: Vessel Monitoring Systems; Amendment to Type-Approval Requirements
RIN Links:
https://www.federalregister.gov/regulations/0648-BJ15/vessel-monitoring-systems-amendment-to-type-approval-requirements
Topics:
Administrative practice and procedure, Fisheries, Fishing, Reporting and recordkeeping requirements
PDF File:
2020-14600.Pdf
Supporting Documents:
» Fisheries of the Exclusive Economic Zone Off Alaska: Inseason Adjustment to the 2021 Gulf of Alaska Pollock and Pacific Cod Total Allowable Catch Amounts
» Fisheries of the Northeastern United States: Summer Flounder, Scup, and Black Sea Bass 2021 Specifications
» Fisheries of the Northeastern United States: Atlantic Bluefish Fishery; Quota Transfer from MD to NC
» Fisheries of the Northeastern United States: Amendment 21 to the Atlantic Mackerel, Squid, and Butterfish Fishery Management Plan; Correction
» Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic: Electronic Reporting for Federally Permitted Charter Vessels and Headboats in Atlantic Fisheries
» Fisheries of the Northeastern United States: Illex Squid Fishery; Revised 2020 Illex Squid Specifications
» Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic: Electronic Reporting for Federally Permitted Charter Vessels and Headboats in Gulf of Mexico Fisheries
» Pacific Halibut Fisheries: Catch Sharing Plan
» Vessel Monitoring Systems: Requirements for Type-Approval of Cellular Transceiver Units
» Taking and Importing Marine Mammals: Incidental to the U.S. Navy Training and Testing Activities in the Atlantic Fleet Training and Testing Study Area
CFR: (17)
50 CFR 600.1500
50 CFR 600.1501
50 CFR 600.1502
50 CFR 600.1503
50 CFR 600.1504
More ...