[Federal Register Volume 61, Number 132 (Tuesday, July 9, 1996)]
[Notices]
[Pages 36106-36107]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-17419]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Proposed Advisory Circular 21-SQC, Use of Statistical Quality
Control for Product Inspection and Acceptance
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice announces the availability of proposed Advisory
Circular (AC) 21-SQC, Use of Statistical Quality Control for Product
Inspection and Acceptance, for review and comments. The proposed AC 21-
SQC provides information and guidance concerning an acceptable means,
but not the only means, of demonstrating compliance with the
requirements of the Federal Aviation Regulations Part 21, Certification
Procedures for Products and Parts.
DATES: Comments submitted must identify the proposed AC 21-SQC project
number, 94-034, and be received by September 6, 1996.
ADDRESSES: Copies of the proposed AC 21-SQC can be obtained from and
comments may be returned to the following: Federal Aviation
Administration, Policy, Evaluation, and Analysis Branch, AIR-230,
Production and Airworthiness Certification Division, Aircraft
Certification Service, 800 Independence Avenue, SW., Washington, DC
20591.
FOR FURTHER INFORMATION CONTACT:
Policy, Evaluation, and Analysis Branch, AIR-230, Production and
Airworthiness Certification Division, Room 815, Aircraft Certification
Service, Federal Aviation Administration, 800 Independence Avenue, SW,
Washington, DC 20591, (202) 267-8361.
[[Page 36107]]
SUPPLEMENTARY INFORMATION:
Background
The proposed AC 21-SQC provides information and guidance to FAA
production approval applicants or holders concerning the use of
statistical quality control (SQC).
Comments Invited
Interested persons are invited to comment on the proposed AC 21-SQC
listed in this notice by submitting such written data, views, or
arguments as they desire to the aforementioned specified address. All
communications received on or before the closing date for comments
specified above will be considered by the Director, Aircraft
Certification Service, before issuing the final AC.
Comments received on the proposed AC 21-SQC may be examined before
and after the comment closing date in Room 815, FAA headquarters
building (FOB-10A), 800 Independence Avenue SW, Washington, DC 20591,
between 8:30 a.m. and 4:30 p.m.
Issued in Washington, DC, on July 3, 1996.
Frank P. Paskiewicz,
Acting Manager, Production and Airworthiness Certification Division.
[FR Doc. 96-17419 Filed 7-8-96; 8:45 am]
BILLING CODE 4910-13-M
