02-17191. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 22 2002 to June 22, 2002, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

DATES:

Comments identified by the docket ID number OPPT-2002-0037 and the specific PMN number, must be received on or before August 8, 2002.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0037 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Acting Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations”,” Regulations and Proposed Rules, and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the Federal Register listings at http://www.epa.gov/​fedrgstr/​.

2. In person. The Agency has established an official record for this action under docket ID number OPPT-2002-0037. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, any test data submitted by the Manufacturer/Importer is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B- 607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is [phone].

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0037 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

3. Electronically. You may submit your comments electronically by e-mail to: “[e-mail],” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket ID number OPPT-2002-0037 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 22 2002 to June 22, 2002, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 87 Premanufacture Notices Received From: 05/22/02 to 06/22/02

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-02-0698	05/22/02	08/20/02	Dow Corning Corporation	(G) Adhesive	(G) Treated metal oxide
P-02-0699	05/22/02	08/20/02	CBI	(G) Open non-dispersive use	(G) Substituted aminophenyl substituted heteropolycycle, salt
P-02-0700	05/23/02	08/21/02	3M Company	(G) Protective coating	(G) Fluorochemmical acrylate polymer
P-02-0701	05/23/02	08/21/02	CBI	(S) Pigment dispersant	(S) 2-propenoic acid, 2-methyl-, polymer with phosphinicobis(oxy-2,1-ethanediyl) bis[2-methyl-2-propenoate] and 2-(phosphonooxy) ethyl 2-methyl-2-propenoate, peroxydisulfuric acid ([(ho)s(o)2]2o2) disodium salt-initiated, sodium salts
P-02-0702	05/23/02	08/21/02	CBI	(S) Pigment dispersant	(S) 2-propenoic acid, 2-methyl-, polymer with phosphinicobis(oxy-2,1-ethanediyl) bis[2-methyl-2-propenoate] and 2-(phosphonooxy) ethyl 2-methyl-2-propenoate, peroxydisulfuric acid ([(ho)s(o)2]2o2) disodium salt-initiated, ammonium salts
P-02-0703	05/23/02	08/21/02	CBI	(S) Pigment dispersant	(S) 2-propenoic acid, 2-methyl-, polymer with phosphinicobis(oxy-2,1-ethanediyl) bis[2-propenoate] and 2-(phosphonooxy) ethyl 2-propenoate, peroxydisulfuric acid ([(ho)s(o)2]2o2) disodium salt-initiated, sodium salts
P-02-0704	05/23/02	08/21/02	CBI	(S) Pigment dispersant	(S) 2-propenoic acid, 2-methyl-, polymer with phosphinicobis(oxy-2,1-ethanediyl) bis[2-propenoate] and 2-(phosphonooxy) ethyl 2-propenoate, peroxydisulfuric acid ([(ho)s(o)2]2o2) disodium salt-initiated, ammonium salts
P-02-0705	05/24/02	08/22/02	International specialty products	(S) Component of coatings for digital printing paper	(S) Sulfuric acid, diethyl ester, compound with nu-[3-(dimethylamino)propyl]-2-methyl-2-propenamide polymer with 1-ethenyl-2-pyrrolidinone, sulfate
P-02-0706	05/28/02	08/26/02	Piedmont Chemical Industries I, LLC	(S) Dyeing assistant for polyester	(S) Fatty acids, C16-18 and C18-unsaturated, branched and linear, esters with polyethylene-polypropylene glycol
P-02-0707	05/28/02	08/26/02	Ciba Specialty Chemicals Corporation	(S) Photoacid generator for resists in semiconductor and display manufacturing	(G) Camphorsulfonate
P-02-0708	05/28/02	08/26/02	Cytec Industries Inc.	(G) Crosslinking agent (substance a and b)	(G) Multifunctional polycarbodiimide (substance a and b)
P-02-0709	05/28/02	08/26/02	Cytec Industries Inc.	(G) Crosslinking agent (substance a and b)	(G) Multifunctional polycarbodiimide (substance a and b)
P-02-0710	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine and fatty amines
P-02-0711	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with, ethylenediamine, 2-methyl-1,5-pentanediamine and fatty amines
P-02-0712	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with 2-methyl-1,5-pentanediamine and fatty amines
P-02-0713	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, polymers with ethylenediamine and fatty amines
P-02-0714	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, polymers with ethylenediamine, 2-methyl-1,5-pentanediamine and fatty amines
P-02-0715	05/28/02	08/26/02	CBI	(G) Gellant	(G) Fatty acids, C18-unsaturated, dimers, polymers with fatty amines and 2-methyl-1,5-pentanediamine
P-02-0722	05/29/02	08/27/02	CBI	(G) Destructive use	(G) Halogenated titanium amide
P-02-0723	05/29/02	08/27/02	CBI	(G) Destructive use	(G) Halogenated titanium amide
P-02-0724	05/30/02	08/28/02	CBI	(G) Nickel and nikel alloy electroplating complex	(G) Alklyamine metal complexes
P-02-0729	05/31/02	08/29/02	Solutia Inc.	(S) Resin for industrial paints	(G) Acrylic copolymer
P-02-0730	05/31/02	08/29/02	CBI	(G) Chemical intermediate	(G) Polytertiaryamine glycol
P-02-0731	06/04/02	09/02/02	CBI	(G) Raw material used to manufacture processing aid	(S) Fatty acids, C16-18 and C18-unsaturated, branched and linear, reaction products with polyethylenepolyamines
P-02-0732	06/04/02	09/02/02	GE Silicones	(S) Intermediate	(G) Alkyl hydride silicone
P-02-0733	06/04/02	09/02/02	GE Silicones	(G) Formulation additive	(G) Alkyl silicone
P-02-0734	06/04/02	09/02/02	GE Silicones	(G) Formulation additive	(G) Crosslinked alkyl silicone
P-02-0735	06/04/02	09/02/02	CBI	(S) Resin for spray applied coatings	(G) Acid functional polyester resin amine salted
P-02-0736	06/04/02	09/02/02	CBI	(S) Coating for synthetic polymers.	(G) Aqueous dispersion of a polyester based aliphatic polyurethane.
P-02-0737	06/04/02	09/02/02	CBI	(G) Colorant for coating compositions	(G) Naphthalenesulfonic acid derivative
P-02-0738	06/05/02	09/03/02	CBI	(G) Adhesive for open, non-dispersive use	(G) Polymer of castor oil, alkylene ether glycol and isophorone diisocyanate
P-02-0739	06/05/02	09/03/02	CBI	(G) Inhibitor	(G) Amine salt
P-02-0740	06/05/02	09/03/02	CBI	(G) Sealant additive	(G) Polyether isocyanate
P-02-0741	06/06/02	09/04/02	Dic Imaging Products USA, Inc.	(G) Charge enhancing additive	(S) Piperazine, polymer with 1,6-dichlorohexane*
P-02-0742	06/04/02	09/02/02	CBI	(G) Component of a plastic disc.	(G) Polyurethane
P-02-0743	06/07/02	09/05/02	Eastman Kodak Company	(S) Adhesion promoter for paints	(G) Modified polyolefin
P-02-0744	06/07/02	09/05/02	CBI	(G) Dyestuff	(G) Lithium salt of azo bridged acid
P-02-0745	06/10/02	09/08/02	CBI	(G) Open, non-dispersive (chelating agent)	(G) Aqueous solution of iminodisuccinic acid ammonium salt
P-02-0746	06/10/02	09/08/02	E.I. Dupont de Nemours and Company, Inc.	(G) Extruded parts and films	(G) Aromatic - aliphatic polyamide
P-02-0747	06/10/02	09/08/02	CBI	(G) Film additive	(G) Amine polymer salt
P-02-0748	06/10/02	09/08/02	Hybrid Plastics, Inc.	(G) Thermoplastic polymer additive (open, non-dispersive use)	(S) Heptacyclo[11.11.1.13, 11.15,21.17, 19.19,17.115,23] dodecasiloxane, dodecaphenyl-
P-02-0749	06/10/02	09/08/02	Hybrid Plastics, Inc.	(G) Thermoplastic polymer additive (open, non-dispersive use)	(S) Pentacyclo[9.5.1.13, 9.15,15.17,13]octasiloxane, octakis(2-methylpropyl)-
P-02-0750	06/10/02	09/08/02	Hybrid Plastics, Inc.	(G) Polymer additive (open, nondispersive)	(S) Pentacyclo[9.5.1.13, 9.15,15.17, 13]octasiloxane, octamethyl-
P-02-0751	06/10/02	09/08/02	Hybrid Plastics, Inc.	(G) Polymer additive (open, nondispersive)	(S) Pentacyclo[9.5.1.13, 9.15,15.17, 13]octasiloxane, octaphenyl-
P-02-0752	06/10/02	09/08/02	E.I. Dupont de Nemours and Company, Inc.	(S) Isolated intermediate	(G) Salt of aromatic acids and aliphatic amine
P-02-0753	06/11/02	09/09/02	Ciba Specialty Chemicals Corporation	(S) Photoresist for electronics industry; color filter resist for manufacturing of color filters	(G) Oxime ester
P-02-0754	06/11/02	09/09/02	Solutia Inc.	(S) Cross-linker for industrial coatings	(G) Amine modified epoxy resin
P-02-0755	06/11/02	09/09/02	CBI	(G) Adhesives for open, non-dispersive use	(G) Polymer of oxirane, mono[(C12-C14-alkoxy)methyl] derivative and alkyamine
P-02-0756	06/11/02	09/09/02	Solutia Inc.	(S) Cross-linker for industrial coatings	(G) Amine modified epoxy resin
P-02-0757	06/11/02	09/09/02	CBI	(G) An open non-dispersive use	(G) Rosin modified phenolic resin
P-02-0758	06/12/02	09/10/02	Loctite Corporation	(S) A component of adhesive formulations for general indusrial bonding applications	(S) Poly(oxy-1,4-butanediyl), alpha-[[[3,3,5-trimethyl-5-[[[[[[[[[[3,3,5- trimethyl-5-[[[[2-[(2-methyl-1-oxo-2-propenyl)oxy [ethoxy]carbonyl]amino]methyl] cyclohexyl]amino]carbonyl] oxy]methyl]tricyclodecyl] methoxy]carbonyl]amino]methyl] cyclohexyl[amino]carbonyl]-omega-[[[[3,3,5-trimethyl-5- [[[[[[[[[3,3,5-trimethyl-5-[[[[2- [(2-methyl-1-oxo-2-propenyl)oxy]ethoxy] carbonyl]amino]methyl]cyclohexyl] amino]carbonyl]oxy]methyl] tricyclodecyl]methoxy] carbonyl]amino]methyl] cyclohexyl]amino]carbonyl]oxy]-
P-02-0759	06/12/02	09/10/02	The Dow Chemical Company	(G) Thin film dielectric layers for microelectronic applications	(G) Silsesquioxane, siloxane
P-02-0760	06/11/02	09/09/02	CBI	(G) All purpose cleaner and paint reemover	(G) Hydroxal fatty acids esters
P-02-0761	06/14/02	09/12/02	Ethox Chemicals, LLC	(S) Pariffin wax additive	(S) Octadecanoic acid, 2-[[2,2-bis[[(1-oxooctadecyl) oxy]methyl]butoxy]methyl]- 2-ethyl-1,3-prop anediyl ester
P-02-0762	06/14/02	09/12/02	CBI	(G) Open, non-dispersive (binder in coatings applications)	(G) Polyester polyol
P-02-0763	06/14/02	09/12/02	Ashland Inc.	(G) Open, dipersive-used in reinforced molding operations	(G) Unsaturated polyester
P-02-0764	06/14/02	09/12/02	The Dow Chemical Company	(G) Coating	(G) Aspartic ester
P-02-0765	06/12/02	09/10/02	CBI	(G) Lubricant, for oil fields.	(G) Alkyl phosphate ester
P-02-0766	06/14/02	09/12/02	CBI	(S) Flame retardant for plastic articles	(G) Polyphosphoric acids, amine salt
P-02-0767	06/14/02	09/12/02	CBI	(G) Component of odorant compositions for highly dispersive applications	(G) Substituted alkene
P-02-0768	06/17/02	09/15/02	IFS Industries, Inc.	(S) Panel assembly	(G) Isocyanate terminated hot melt polyurethane adhesive
P-02-0769	06/17/02	09/15/02	IFS Industries, Inc.	(S) Panel assembly	(G) Isocyanate terminated hot melt polyurethane adhesive
P-02-0770	06/17/02	09/15/02	IFS Industries, Inc.	(S) Panel assembly	(G) Isocyanate terminated hot melt polyurethane adhesive
P-02-0771	06/17/02	09/15/02	CBI	(S) Resin for inks; resins for coatings and adhesives	(G) Polyether polyurethane
P-02-0772	06/18/02	09/16/02	Cognis Corporation	(G) Surfactant	(S) D-glucopyranose, oligomeric, 2-ethylhexyl glycosides
P-02-0773	06/18/02	09/16/02	Warner-Jenkinson Company, Inc.	(G) Intermediate	(G) Remazolamine
P-02-0774	06/18/02	09/16/02	Danisco USA Inc.	(S) Plasticizer for pvc + other plastics/films; colorant carrier for plastics; dye dispersant for hot melt inks	(S) Octadecanoic acid, 12-(acetyloxy)-, 2,3-bis(acetyloxy)propyl ester(9ci)
P-02-0775	06/20/02	09/18/02	The Dow Chemical Company	(G) Binder for recycled plastic and rubber	(G) 1,1′methylenebis[diisocyanato] benzene, polyetherpolyol polymer
P-02-0776	06/20/02	09/18/02	CBI	(G) Chemical intermediate	(G) Alkoxylated aromatic aldehyde
P-02-0777	06/20/02	09/18/02	CBI	(G) Chemical intermediate	(G) Alkoxylated aromatic aldehyde
P-02-0778	06/20/02	09/18/02	R. T. Vanderbilt Company, Inc.	(S) Antioxidant/anti-wear additive for lubricants	(G) Dialkyl dithiocarbamate ester
P-02-0779	06/20/02	09/18/02	R. T. Vanderbilt Company, Inc.	(S) Antioxidant/anti-wear additive for lubricants	(G) Dialkyl dithiocarbamate ester
P-02-0780	06/20/02	09/18/02	R. T. Vanderbilt Company, Inc.	(S) Antioxidant/anti-wear additive for lubricants	(G) Dialkyl dithiocarbamate ester
P-02-0781	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0782	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0783	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0784	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0785	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0786	06/20/02	09/18/02	CBI	(G) Polymeric chromophore	(G) Polyalkoxylated aromatic chromophore
P-02-0787	06/21/02	09/19/02	CBI	(G) Component of coating with open use	(G) Epoxy functional styrenated methacrylate
P-02-0788	06/21/02	09/19/02	CBI	(S) Industrial uv coatings and inks	(G) Urethane acrylate ester
P-02-0789	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin
P-02-0790	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin
P-02-0791	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin
P-02-0792	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin
P-02-0793	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin
P-02-0794	06/21/02	09/19/02	The Dow Chemical Company	(S) Ultraviolet curable binder for overprint varnish; ultraviolet curable binder for inks; ultraviolet curable binder for wood coatings	(G) Ultraviolet-curable resin

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 2 Test Marketing Exemption Notices Received From: 05/22/02 to 06/22/02

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-02-0007	06/20/02	08/04/02	ITW Devcon	(G) Oil resistant industrial coating	(G) Isocyanati-terminated polyurethane prepolymer
T-02-0008	06/21/02	08/05/02	CBI	(G) Cleaning hydrotrope	(G) Monoalkyl quaternary ammonium salt

In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 44 Notices of Commencement From: 05/22/02 to 06/22/02

Case No.	Received Date	Commencement/Import Date	Chemical
P-00-0173	05/31/02	05/06/02	(S) Tridecene
P-00-0377	06/14/02	05/16/02	(G) Fluoroolefin copolymer
P-00-0419	06/04/02	04/18/02	(G) Polycarbonate polyester
P-00-1117	06/19/02	05/29/02	(G) Alkenyl keto acid
P-00-1165	06/18/02	05/15/02	(G) Fluoropolyether derivative
P-01-0075	06/14/02	06/11/02	(G) Substituted benzofuranone
P-01-0590	05/24/02	10/03/01	(G) Substituted amido benzoic acid ester
P-01-0622	06/11/02	05/16/02	(G) Substituted ppvs (poly-p-phenylen-vinylens)
P-01-0727	06/20/02	05/20/02	(G) Modified acrylic resin
P-01-0920	06/14/02	05/15/02	(G) Polymer ester of mono and dibasic acids
P-01-0923	06/18/02	06/10/02	(G) Cycloalkyl acetate
P-01-0924	05/30/02	05/03/02	(G) Carbo cyclic oxime
P-01-0928	06/20/02	06/10/02	(G) Alkoxysilane
P-02-0063	05/24/02	04/26/02	(S) Cyclohexanecarboxylic acid, 1,4-dimethyl-, methyl ester (cis and trans); cyclohexanecarboxylic acid, 1,3-dimethyl-, methyl ester (cis and trans)
P-02-0101	06/11/02	05/08/02	(G) Substituted pyridinedicarboxylic acid
P-02-0126	06/14/02	05/09/02	(G) Polymer ester of mono and dibasic acids
P-02-0136	06/19/02	06/05/02	(G) Polyester polyurethane
P-02-0142	05/23/02	05/10/02	(G) Urethane acrylate
P-02-0149	06/17/02	05/16/02	(G) Alkyl octanal
P-02-0171	06/21/02	05/29/02	(G) Organophosphorous salt
P-02-0173	06/05/02	05/07/02	(S) N-ethyl-n-(3-methylphenyl) propionamide
P-02-0194	05/28/02	05/04/02	(G) Aliphatic urethane
P-02-0195	06/10/02	05/23/02	(G) Fluorochemical urethane
P-02-0204	05/30/02	05/17/02	(G) Polyurethane resin dispersion
P-02-0206	05/30/02	05/17/02	(G) Polyurethane resin despersion
P-02-0208	06/06/02	05/20/02	(G) Siloxane polyol ester
P-02-0237	06/11/02	05/24/02	(G) Acrylic polymer
P-02-0243	06/14/02	05/17/02	(G) Isocyanate terminated urethane polymer
P-02-0255	06/04/02	05/02/02	(G) Polyester polyether isocyanate
P-02-0261	05/30/02	05/10/02	(G) Piperidinol
P-02-0289	06/04/02	05/16/02	(S) Carbonic acid, dimethyl ester, polymer with 1,4-cyclohexanedimethanol and 1,6-hexanediol
P-02-0293	05/30/02	05/17/02	(G) Acrylic polymer
P-02-0321	06/05/02	05/17/02	(G) Ethoxy alkene
P-02-0323	05/24/02	05/09/02	(G) Modified fatty acid ester
P-02-0325	06/07/02	05/06/02	(G) Polyurethane prepolymer
P-02-0330	05/29/02	05/07/02	(G) Polyalkylene glycol, alkyl ether, reaction products with diisocyanatoalkane and polyalkylene glycol
P-02-0346	06/10/02	05/22/02	(G) Alkyd resin
P-02-0347	06/03/02	05/13/02	(S) Fatty acids, C16-18 and C18-unsaturated, branched and linear, esters with high-boiling C6-10 alkene hydroformylation products
P-02-0372	06/04/02	05/21/02	(G) Bifunctional reactive azo dye
P-02-0375	06/04/02	05/21/02	(G) Bifunctional reactive azo dye
P-02-0405	06/18/02	06/11/02	(G) Polyester-type polyurethane
P-98-0393	05/30/02	05/13/02	(G) Aqueous polyurethane dispersion
P-99-1037	06/13/02	06/10/02	(G) Alkylphenol mannich
P-99-1163	06/06/02	05/07/02	(S) Palladium(2-), tetraamine-, [sp-4-1]-, carbonate (1:2)

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: July 2, 2002.

Sandra R. Wilkins,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.