[Federal Register Volume 60, Number 154 (Thursday, August 10, 1995)]
[Notices]
[Pages 40878-40879]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-19711]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. 95-61; Notice 1]
Notice of Receipt of Petition for Decision That Nonconforming
1992 Volvo 740 GL and 940 GL Sedan and Wagon Passenger Cars Are
Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1992 Volvo 740 GL and 940 GL Sedan and Wagon passenger cars are
eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that 1992
Volvo 740 GL and 940 GL sedans and wagons that were not originally
manufactured to comply with all applicable Federal motor vehicle safety
standards are eligible for importation into the United States because
(1) they are substantially similar to vehicles that were originally
manufactured for importation into and sale in the United States and
that were certified by their manufacturer as complying with the safety
standards, and (2) they are capable of being readily altered to conform
to the standards.
DATES: The closing date for comments on the petition is September 11,
1995.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Section, Room 5109, National
Highway Traffic Safety Administration, 400 Seventh St.,
[[Page 40879]]
SW, Washington, DC 20590. [Docket hours are from 9:30 am to 4 pm]
FOR FURTHER INFORMATION CONTACT:
George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-
5306).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i)(I)
of the National Traffic and Motor Vehicle Safety Act (the Act)), a
motor vehicle that was not originally manufactured to conform to all
applicable Federal motor vehicle safety standards shall be refused
admission into the United States unless NHTSA has decided that the
motor vehicle is substantially similar to a motor vehicle originally
manufactured for importation into and sale in the United States,
certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and
of the same model year as the model of the motor vehicle to be
compared, and is capable of being readily altered to conform to all
applicable Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer
90-006) has petitioned NHTSA to decide whether 1992 Volvo 740 GL and
940 GL sedans and wagons are eligible for importation into the United
States. The vehicles which J.K. believes are substantially similar are
1992 Volvo 740 GL and 940 GL sedans and wagons that were manufactured
for importation into, and sale in, the United States and certified by
their manufacturer as conforming to all applicable Federal motor
vehicle safety standards.
The petitioner claims that it carefully compared non-U.S. certified
1992 Volvo 740 GL and 940 GL sedans and wagons to their U.S. certified
counterparts, and found the vehicles to be substantially similar with
respect to compliance with most Federal motor vehicle safety standards.
J.K. submitted information with its petition intended to
demonstrate that non-U.S. certified 1992 Volvo 740 GL and 940 GL sedans
and wagons, as originally manufactured, conforms to many Federal motor
vehicle safety standards in the same manner as their U.S. certified
counterparts, or are capable of being readily altered to conform to
those standards.
Specifically, the petitioner claims that non-U.S. certified 1992
Volvo 740 GL and 940 GL sedans and wagons are identical to their U.S.
certified counterparts with respect to compliance with Standards Nos.
102 Transmission Shift Level Sequence * * *, 103 Defrosting and
Defogging Systems, 104 Windshield Wiping and Washing Systems, 105
Hydraulic Brake Systems, 106 Brake Hoses, 107 Reflecting Surfaces, 109
New Pneumatic Tires, 113 Hood Latch Systems, 116 Brake Fluid, 124
Accelerator Control Systems, 201 Occupant Protection in Interior
Impact, 202 Head Restraints, 203 Impact Protection for the Driver From
the Steering Control System, 204 Steering Control Rearward
Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention
Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat
Belt Assembly Anchorages, 211 Wheel Nuts, Wheel Discs and Hubcaps, 212
Windshield Retention, 214 Side Impact Protection, 216 Roof Crush
Resistance, 219 Windshield Zone Intrusion, 301 Fuel System Integrity,
and 302 Flammability of Interior Materials.
Additionally, the petitioner states that non-U.S. certified 1992
Volvo 740 GL and 940 GL sedans and wagons comply with the Bumper
Standard found in 49 CFR Part 581.
Petitioner also contends that these vehicles are capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) substitution of a lens
marked ``Brake'' for a lens with an ECE symbol on the brake failure
indicator lamp; (b) recalibration of the speedometer/odometer from
kilometers to miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: (a) Installation of U.S.-model headlamps and front
sidemarkers; (b) installation of U.S.-model taillamp lenses which
incorporate rear sidemarkers; (c) installation of a high mounted stop
lamp.
Standard No. 110 Tire Selection and Rims: installation of a tire
information placard.
Standard No. 111 Rearview Mirror: replacement of the passenger side
rearview mirror with a U.S.-model component.
Standard No. 114 Theft Protection: installation of a warning buzzer
microswitch and a warning buzzer in the steering lock assembly.
Standard No. 115 Vehicle Identification Number: installation of a
VIN plate that can be read from outside the left windshield pillar, and
a VIN reference label on the edge of the door or latch post nearest the
driver.
Standard No. 118 Power Window Systems: installation of a relay in
the power window system so that the window transport is inoperative
when the ignition is switched off.
Standard No. 208 Occupant Crash Protection: (a) installation of a
seat belt warning buzzer; (b) installation of knee bolsters to augment
the vehicles' air bag based passive restraint system, which otherwise
conforms to the standard. The petitioner states that in addition to a
driver's side air bag, the vehicles are equipped with side impact
protection systems, with manual lap and shoulder belts in the front and
rear outboard seating positions, and with a manual lap belt in the
center seating positions.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Section, National Highway Traffic Safety
Administration, Room 5109, 400 Seventh Street, SW., Washington, DC
20590. It is requested but not required that 10 copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action on the petition
will be published in the Federal Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: August 4, 1995.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 95-19711 Filed 8-9-95; 8:45 am]
BILLING CODE 4910-59-M
