E6-13285. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 16, 2006 to July 28, 2006, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before September 13, 2006.

ADDRESSES:

Submit your comments, identified by docket identification (ID) no. EPA-HQ-OPPT-2006-0683, by one of the following methods.

• http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO, EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2006-0683. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
• Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2006-0683. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the regulations.gov index. Although listed in the index, some information is not publicly available, i.e., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available electronically through regulations.gov or in hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West, Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone].

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at the estimate.

vi. Provide specific examples to illustrate your concerns, and suggested alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 16, 2006 to July 28, 2006, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 78 Premanufacture Notices Received From: 06/16/06 to 07/28/06

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-06-0616	06/15/06	09/12/06	PPG Aerospace PRC-desoto	(S) Reactive diluent/binder in aerospace sealants	(G) Modified triethylene glycol dithiol
P-06-0617	06/19/06	09/16/06	CBI	(G) Destructive use	(G) Brominated polyaromatic compound
P-06-0618	06/20/06	09/17/06	CBI	(G) Highly dispersive powdered emulsifier component	(G) Salts of modified tall-oil fatty acid amidoamines
P-06-0619	06/20/06	09/17/06	CBI	(G) Highly dispersive powdered emulsifier component	(G) Salts of modified tall-oil fatty acids
P-06-0620	06/26/06	09/23/06	Oleon Americas, Inc.	(G) Industrial hydraulic fluid	(S) Fatty acids, C8-10, tetraesters with bis[2,2-bis(hydroxymethyl)butyl] adipate
P-06-0621	06/27/06	09/24/06	CBI	(S) Base resin for ultra violet light and electron beam curable formulations	(G) Organic acid, polymer with 1,6-hexanediol and 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, 2-hydroxyethyl acrylate-blocked
P-06-0622	06/27/06	09/24/06	Huntsman Corporation	(S) Intermediate monomer for polymer synthesis	(S) 1,2-ethanediol, monocarbamate
P-06-0623	06/28/06	09/25/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Aspartic acid, N,N′-(iminodi-alkanediyl)bis, tetraalkane ester
P-06-0624	06/28/06	09/25/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Aspartic acid, N,N,′-(iminodi-alkanediyl)bis, tetraalkane ester
P-06-0625	06/23/06	09/20/06	CBI	(S) Adhesion promotor for polyurethane	(G) Isocyanate-terminated alkyl alkoxy silane
P-06-0626	06/28/06	09/25/06	Forbo adhesives, LLC	(G) Hot melt adhesive	(G) Isocyanate functional polyester urethane polymer
P-06-0627	06/28/06	09/25/06	Hi-tech Color, Inc.	(G) Additive in waterbase inks	(G) Styrene acryl polymer
P-06-0628	06/28/06	09/25/06	Cytec Surface Specialties Inc.	(S) Ultra violet/electron beam binder resin for coatings	(G) Alkyl diisocyanate, homopolymer, substituted alkenoic acid and heteromonocyclic homopolymer and substituted polyethylene glycol
P-06-0629	06/29/06	09/26/06	CBI	(G) Coating component	(G) Polymer of styrene, alkyl methacrylates, and substituted methacrylates
P-06-0630	06/29/06	09/26/06	CBI	(G) Coating component	(G) Mixed metal oxide complex
P-06-0631	06/28/06	09/25/06	CBI	(G) Open non-dispersive (resin)	(G) Aromatic thermoplastic polyurethane
P-06-0632	06/30/06	09/27/06	CBI	(G) Processing aid for vegetable oil refining	(S) Phospholipase c
P-06-0633	06/30/06	09/27/06	CBI	(G) Antioxidant	(G) Ncs 1: Substituted phenol
P-06-0634	06/30/06	09/27/06	CBI	(G) Antioxidant	(G) Ncs 2: Substituted phenol
P-06-0635	07/03/06	09/30/06	CBI	(S) Ingredient in fragrance compound	(S) 6,10-dodecadien-1-ol, 3,7,11-trimethyl-
P-06-0636	07/03/06	09/30/06	CBI	(S) Curing agent for epoxy coating systems	(G) Polymer of unsaturated fatty acids with phenylalkylene polyamine, epoxy resin and polyether polyamine
P-06-0637	07/03/06	09/30/06	CBI	(S) Aromatic polyester used as a component in photoresist manufacture	(G) Aromatic polyester
P-06-0638	07/05/06	10/02/06	CBI	(S) Crosslinked polyester used as a component in photoresist manufacture.	(G) Crosslinked cyclic polyester
P-06-0639	07/05/06	10/02/06	Alberdingk Boley Inc.	(G) Industrial coatings	(G) Castor oil, dehydrated polymer with adipic acid, ethylenediamine, 1,6-hexanediol, 3-hydroxy-2-(hydroxymethyl)-2-methylpropanoic acid, 1,1′-methylenebis[4-isocyanatocyclohexane], neopentyl glycol and polyethylene glycol mono[2,2-bis(hydroxyalkyl)alkyl] ether, compound with triethylamine
P-06-0640	07/05/06	10/02/06	CBI	(G) Masking aid	(G) Isocyanate terminated adduct of polymeric isocyanate with an amine silane
P-06-0641	07/06/06	10/03/06	Para-chem, Inc./Standard Division	(G) Binder	(G) Acrylate, polymers with poly(vinyl alcohol)
P-06-0642	07/06/06	10/03/06	Para-Chem, Inc./Standard Division	(G) Binder	(G) Acrylate, polymers with poly(vinyl alcohol)
P-06-0643	07/06/06	10/03/06	Para-Chem, Inc./ Standard Division	(G) Binder	(G) Acrylate, polymers with poly(vinyl alcohol)
P-06-0644	07/07/06	10/04/06	Boulder Scientific Company	(S) Chemical intermediate	(S) Magnesium, bromo(pentafluorophenyl)-
P-06-0645	07/07/06	10/04/06	International Flavors and Fragrances, Inc.	(S) Raw material for use in fragrances for soaps, detergents, cleaners and other household products	(S) 3-decen-5-one, 4-methyl-, (3e)-
P-06-0646	07/07/06	10/04/06	CBI	(G) Industrial coatings binder	(G) Fatty acids, alkyl- unsaturated, dimers, reaction products with bisphenol a-bisphenol a diglycidyl ether polymer and polyethylenepolyamines
P-06-0647	07/07/06	10/04/06	CBI	(G) Colorant	(G) Sulfonated azo-naphthalene derivative, salt
P-06-0648	07/07/06	10/04/06	CBI	(G) Colorant	(G) Sulfonated azo-naphthalene derivative, salt
P-06-0649	07/07/06	10/04/06	CBI	(G) Colorant	(G) Sulfonated azo-naphthalene derivative, salt
P-06-0650	07/07/06	10/04/06	CBI	(G) Colorant	(G) Sulfonated azo-naphthalene derivative, salt
P-06-0651	07/10/06	10/07/06	CBI	(G) Paint additive	(G) Acrylic polymer
P-06-0652	07/10/06	10/07/06	CBI	(G) Paint additive	(G) Acrylic polymer
P-06-0653	07/10/06	10/07/06	CBI	(G) Paint additive	(G) Acrylic polymer
P-06-0654	07/10/06	10/07/06	CBI	(G) Paint additive	(G) Acrylic polymer
P-06-0655	07/11/06	10/08/06	CBI	(G) Synthetic lubricant base stock	(G) Polyol esters
P-06-0656	07/11/06	10/08/06	CBI	(G) Synthetic lubricant base stock	(G) Polyol esters
P-06-0657	07/11/06	10/08/06	CBI	(S) Coatings application	(G) Alkyl acetoacetate resin
P-06-0658	07/12/06	10/09/06	Cytec Surface Specialties Inc.	(S) Flame retardant additive for surface coatings	(G) Phosphine oxide ester
P-06-0659	07/13/06	10/10/06	Dow Agrosciences	(S) Intermediate	(G) Macrocyclic lactone derivative salt
P-06-0660	07/13/06	10/10/06	Dow Agrosciences	(S) Intermediate	(G) Macrocyclic lactone derivative
P-06-0661	07/13/06	10/10/06	CBI	(G) Industrial adhesive primer component for open, non-dispersive use	(G) Naphthalenesulfonic acid salt, polymer with resorcinol, formaldehyde and phenol
P-06-0662	07/14/06	10/11/06	CBI	(G) Open non-dispersive (polyurethane lacquer)	(G) Polyester polyurethane
P-06-0663	07/14/06	10/11/06	CBI	(G) Open non-dispersive (coating)	(G) Aliphatic polyester - polyurethane
P-06-0664	07/14/06	10/11/06	CBI	(G) Open air non-dispersive use	(G) Polyester/urethane acrylate oligomer
P-06-0665	07/14/06	10/11/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0666	07/14/06	10/11/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0667	07/14/06	10/11/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0668	07/14/06	10/11/06	PG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0669	07/14/06	10/11/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0670	07/14/06	10/11/06	PPG Industries, Inc.	(G) Component of an industrial coating	(G) Alkenedioic acid, dialkyl ester, reaction products with polyaminocarbomonocycle and alkenoic acid alkyl ester
P-06-0671	07/14/06	10/11/06	CBI	(G) Spacer in electronic parts	(S) 2-propenoic acid, 1,6-hexanediyl ester, polymers with 2-hydroxyethyl acrylate-blocked hydroxy-terminated polybutadiene-2,4-tdi polymer
P-06-0672	07/14/06	10/11/06	CBI	(G) Spacer in electronic parts	(S) Poly(oxy-1,4-butanediyl), .alpha.-(1-oxo-2-propenyl)-.omega.-[(1-oxo-2-propenyl)oxy]-, polymer with diethenylbenzene and ethenylethylbenzene
P-06-0673	07/17/06	10/14/06	CBI	(G) Open non-dispersive uses	(G) Silylated polymer
P-06-0674	07/19/06	10/16/06	CBI	(G) Polymer used to improve scratch resistance of thermoplastics open/non-dispersive use	(G) Alkene acrylate copolymer
P-06-0675	07/20/06	10/17/06	CBI	(S) Hotmelt adhesive for textile/clothes applications	(G) Aliphatic dicarboxylic acid polymer with alkanediamine and lactam
P-06-0676	07/20/06	10/17/06	Sasol North America Inc.	(S) Mineral processing (flotation aid) - substitute for diesel; oil recovery (drilling and field fluids) - substitute for diesel	(S) Alcohols, C2-33, manufacture. of, by products from, overheads
P-06-0677	07/21/06	10/18/06	Dupont Company	(G) Film resin	(G) Ethylene interpolymer
P-06-0678	07/21/06	10/18/06	Zeon Chemicals L.P.	(S) Automotive seals and gaskets	(G) Acrylate copolymer
P-06-0679	07/21/06	10/18/06	CBI	(G) Ink additive	(G) 1,3-benzenedisulfonic acid, 4-[[3-methyl-1-(3-sulfobenzoyl)heteropolycyclel]amino]-, triammonium salt
P-06-0680	07/21/06	10/18/06	CBI	(G) Printing ink additive	(G) Polyurethane polymer
P-06-0681	07/24/06	10/21/06	CBI	(G) An open non-dispersive use	(G) Bisphenol a type epoxy resin
P-06-0682	07/18/06	10/15/06	CBI	(G) Destructive use	(G) Surface modified magnesium hydroxide
P-06-0683	07/25/06	10/22/06	Henkel	(S) Hot melt and molding adhesives	(S) Dodecanedioic acid, polymer with 1,6-hexanediamine and piperazine
P-06-0684	07/25/06	10/22/06	Henkel	(S) Hot melt and molding adhesives	(S) Decanedioic acid, polymer with 1,6-hexanediamine and piperazine
P-06-0685	07/25/06	10/22/06	Henkel	(S) Hot melt and molding adhesives	(S) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine, hexamethylenediamine and tetradecanedioic acid
P-06-0686	07/25/06	10/22/06	Henkel	(S) Hot melt and molding adhesives	(S) Fatty acids, C18-unsaturated, dimers, hydrogenated, polymers with ethylenediamine, piperazine, polypropylene glycol diamine and sebacic acid
P-06-0687	07/25/06	10/22/06	Henkel	(S) Hot melt and molding adhesives	(S) Fatty acids, C18-unsaturated, dimers, polymers with adipic acid, hexamethylenediamine, polypropylene glycol diamine and tall-oil fatty acids
P-06-0688	07/25/06	10/22/06	J.H.Calo Company	(S) Polyester resin for 2 component polyurethane systems	(S) Hexanedioic acid, polymer with 2,2-dimethyl-1,3-propanediol, 1,4-cyclohexanedimethanol, hexahydro-1,3-isobenzofurandione and 1,2-propanediol
P-06-0689	07/25/06	10/22/06	Huntsman International, LLC	(S) Exhaust dyeing of cellulosic fabric	(G) Alkyl amino substituted triazine amino substituted benzenesulfonic acid reaction product with naphthalenesulfonato azo substituted phenyl azo substituted benzenedisulfonic acid cooper compound
P-06-0690	07/25/06	10/22/06	CBI	(G) Open non-dispersive thermoplastic resin	(G) Diphenylmethane isocyanate polyester elastomer
P-06-0691	07/26/06	10/23/06	CBI	(G) Chemical intermediate	(G) Derivatized triglycerides
P-06-0692	07/26/06	10/23/06	CBI	(G) Chemical intermediate	(G) Derivatized hydroxylated triglycerides
P-06-0693	07/26/06	10/23/06	CBI	(G) Crude oil production chemical	(G) Alkyl dimethyl betaine

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TME received:

I. 1 Test Marketing Exemption Notice Received From: 06/16/06 to 07/28/06

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-06-0008	07/12/06	08/25/06	Cytec Surface Specialties Inc.	(S) Flame retardant additive for surface coatings	(G) Phosphine oxide ester

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 57 Notices of Commencement From: 06/16/06 to 07/28/06

Case No.	Received Date	Commencement Notice End Date	Chemical
P-01-0694	07/14/06	07/10/06	(G) Bis(substituted)-1,3-benzenediamine
P-01-0855	07/18/06	07/05/06	(G) Substituted vinylether, ethoxylated, propoxylated
P-01-0866	06/28/06	06/14/06	(G) Ethylene amine aromatic epoxide adduct
P-02-1049	07/10/06	06/21/06	(G) Saturated and unsaturated fatty acids, esters with a polyalcohol
P-03-0546	07/03/06	05/26/06	(G) Amine functional epoxy curing agent
P-04-0540	07/25/06	07/17/06	(S) 2,4-nonanedione, 3-methyl-
P-04-0541	07/25/06	07/20/06	(S) 3-hexene, 1,1′,1′′-[ethylidynetris(oxy)]tris-, (3z,3′z,3′′z)-
P-04-0585	07/25/06	07/01/06	(G) Substituted butyl ethyl magnesium
P-04-0640	04/26/06	04/08/06	(G) Multifunctional polycarbodiimide
P-04-0830	07/11/06	06/21/06	(G) Alkoxysilane modified silica
P-04-0834	06/22/06	05/24/06	(G) Hdi biuret, hydroxyethyl methacrylate prepolymer
P-04-0882	07/24/06	07/12/06	(G) Quaternary amino modified silicone-polyether copolymer
P-05-0116	07/10/06	07/05/06	(G) Reaction product of alkylcarboxylic acid, substituted alkenyl amine with aromatic anhydride acetate salts
P-05-0358	07/21/06	07/14/06	(G) Polycarbodiimide
P-05-0416	06/23/06	06/07/06	(G) Acrylic polymer
P-05-0483	07/03/06	06/23/06	(G) Reaction products with polyoxypropylenediamine and alkyl ketone
P-05-0496	07/05/06	06/07/06	(G) Cyclohexane, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethyl-, polymers with hydroxy-terminated saturated hydrocarbon chain, 2-hydroxyethyl acrylate-blocked
P-05-0500	07/05/06	06/21/06	(G) Thermochemical mechanical processed maize germ
P-05-0687	06/21/06	06/15/06	(G) Siloxane coated alumina nanoparticles
P-05-0706	07/07/06	06/15/06	(G) Isocyanate prepolymer
P-05-0707	07/24/06	06/19/06	(G) Halogenated N,N,N-trialkyl-alkylamminium, N-aminocarbonylalkenyl
P-05-0724	07/11/06	06/16/06	(G) Quino[2,3-b]acridine-7,14-dione, 5,12-dihydro-2,9-dimethyl-, 4-[[2-(sulfooxy)ethyl]substituted]phenyl derivates, sodium salts
P-05-0725	07/18/06	07/08/06	(G) Butanamide, 2-[(2-methoxy-4-nitrophenyl)azo]-n-(2-methoxyphenyl)-3-oxo-,4-[[2-(sulfooxy)ethyl]substituted]phenyl derivates, sodium salts.
P-05-0792	07/26/06	07/12/06	(G) Substituted benzenediamine
P-05-0814	07/10/06	06/14/06	(S) Tall-oil pitch, sapond., neutralized, sterol-low, ammonium salts
P-05-0816	07/10/06	06/15/06	(S) Tall-oil pitch, sapond., neutralized, sterol-low, sodium salts
P-06-0004	07/18/06	07/12/06	(G) Butanamide, 2-[(2-methoxy-4-nitrophenyl)azo]-n-(2-methoxyphenyl)-3-oxo-, 4-[(17-substituted-3,6,9,12,15-pentaazaheptadec-1-yl)substituted]phenyl derivates
P-06-0007	07/11/06	06/23/06	(G) Quino[2,3-b]acridine-7,14-dione, 5,12-dihydro-2,9-dimethyl-, 4-[(17-substituted-3,6,9,12,15-pentaazaheptadec-1-yl)substituted]phenyl derivates
P-06-0012	07/19/06	06/20/06	(G) Polyurethane derivative
P-06-0077	06/20/06	06/04/06	(G) Salt of amine with aromatic acid
P-06-0078	07/20/06	06/26/06	(G) Dimethylterephthalate, polymer with mixed glycols, ester with a polyethylene glycol ether
P-06-0101	07/05/06	05/22/06	(G) Acrylic solution polymer
P-06-0165	07/14/06	06/30/06	(G) Halogenated aromatic anhydride copolymer
P-06-0177	07/13/06	07/06/06	(G) Isocyanate functional polyester polyether urethane polymer
P-06-0185	06/22/06	05/16/06	(G) Substituted polycyclic-acid, ((((halo-((substituted)phenyl)amino) -heterocycle)amino-sulfophenyl)azo)-hydroxy-alkyl-substituted-, sodium salt
P-06-0230	06/21/06	06/06/06	(G) Substituted aniline
P-06-0246	07/05/06	06/14/06	(G) Modified ketone resin, sodium salt
P-06-0260	06/28/06	06/09/06	(G) Naphthalenesulfonic acid azo substituted naphthyl amino substituted triazine amino phenyl sulfonyl alkyl salt compound
P-06-0273	07/10/06	06/28/06	(S) Fatty acids, soya, esters with polyethylene glycol mono-me ether
P-06-0306	07/05/06	06/15/06	(G) Aqueous polyurethane dispersion
P-06-0307	07/18/06	07/11/06	(G) Polyester urethane
P-06-0308	07/07/06	06/20/06	(G) Polyester urethane
P-06-0309	07/19/06	06/30/06	(S) 1,3-benzenedicarboxylic acid, polymer with 2,2-dimethyl-1,3-propanediol, 1,2-ethanediol, 2,5-furandione and 1,2-propanediol, phenylmethyl ester
P-06-0314	07/25/06	07/14/06	(G) Polyoxyalkylene siloxane
P-06-0316	07/10/06	06/27/06	(G) Aluminum trihydrate surface treated
P-06-0329	07/05/06	06/24/06	(G) Fatty acid glycol ester
P-06-0331	07/07/06	05/31/06	(G) Silicone polyether modified polyester polyurethane.
P-06-0335	06/28/06	06/23/06	(G) Naphthalenesulfonic acid azo substituted naphthalenesulfonic acid amino substituted triazine amino phenyl sulfonyl compound
P-06-0338	07/13/06	06/26/06	(G) Condensation polymerized silane functionalized aliphatic amine
P-06-0350	07/25/06	06/26/06	(G) Polyoxyalkylene ether
P-06-0377	07/18/06	06/29/06	(S) Phosphonic acid, octyl-, monosodium salt
P-06-0378	07/18/06	06/29/06	(S) Phosphonic acid, octyl-, disodium salt
P-06-0381	06/29/06	06/25/06	(G) Sulfonyl phenyl amino substituted triazine naphthalenesulfonic acid azo phenyl hydroxyl naphthalene hydroxyl azo naphthalenesulfonic acid chromium compound
P-06-0387	07/24/06	07/06/06	(G) 1,1-diacidsubstituted -2 -(4-aminophenyl) ethanol, monosodium salt
P-06-0441	07/24/06	07/17/06	(G) Maleimide alkyl carboxylic acid
P-94-2125	07/10/06	07/05/95	(G) Polyesteramide resin
P-99-1253	07/05/06	06/29/06	(G) Polyamine adducts

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: August 7, 2006.

Darryl S. Ballard,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.