2015-19991. Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 040
-
Start Preamble
AGENCY:
Food and Drug Administration, HHS.
ACTION:
Notice.
SUMMARY:
The Food and Drug Administration (FDA) is announcing a publication containing modifications the Agency is making to the list of standards FDA recognizes for use in premarket reviews (FDA Recognized Consensus Standards). This publication, entitled “Modifications to the List of Recognized Standards, Recognition List Number: 040” (Recognition List Number: 040), will assist manufacturers who elect to declare conformity with consensus standards to meet certain requirements for medical devices.
DATES:
Submit electronic or written comments concerning this document at any time. See section VII for the effective date of the recognition of standards announced in this document.
ADDRESSES:
An electronic copy of Recognition List Number: 040 is available on the Internet at http://Start Printed Page 48872www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/Standards/ucm123792.htm. See section VI for electronic access to the searchable database for the current list of FDA recognized consensus standards, including Recognition List Number: 040 modifications and other standards related information.
Submit written requests for a single hard copy of the document entitled “Modifications to the List of Recognized Standards, Recognition List Number: 040” to the Division of Industry and Consumer Education, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 4613, Silver Spring, MD 20993-0002. Send one self-addressed adhesive label to assist that office in processing your request, or fax your request to 301-847-8149.
Submit electronic comments on this document to http://www.regulations.gov. Submit written comments to the Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852. Identify comments with the docket number found in brackets in the heading of this document.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Scott A. Colburn, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 3632, Silver Spring, MD 20993, 301-796-6287, standards@cdrh.fda.gov.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
I. Background
Section 204 of the Food and Drug Administration Modernization Act of 1997 (Pub. L. 105-115) amended section 514 of the Federal Food, Drug, and Cosmetic Act (the FD&C Act) (21 U.S.C. 360d). Amended section 514 allows FDA to recognize consensus standards developed by international and national organizations for use in satisfying portions of device premarket review submissions or other requirements.
In a notice published in the Federal Register of February 25, 1998 (63 FR 9561), FDA announced the availability of a guidance entitled “Recognition and Use of Consensus Standards.” The notice described how FDA would implement its standard recognition program and provided the initial list of recognized standards.
Modifications to the initial list of recognized standards, as published in the Federal Register, can be accessed at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/Standards/ucm123792.htm.
These notices describe the addition, withdrawal, and revision of certain standards recognized by FDA. The Agency maintains HTML and PDF versions of the list of FDA Recognized Consensus Standards. Both versions are publicly accessible at the Agency's Internet site. See section VI for electronic access information. Interested persons should review the supplementary information sheet for the standard to understand fully the extent to which FDA recognizes the standard.
II. Modifications to the List of Recognized Standards, Recognition List Number: 040
FDA is announcing the addition, withdrawal, correction, and revision of certain consensus standards the Agency will recognize for use in premarket submissions and other requirements for devices. FDA will incorporate these modifications in the list of FDA Recognized Consensus Standards in the Agency's searchable database. FDA will use the term “Recognition List Number: 040” to identify these current modifications.
In table 1, FDA describes the following modifications: (1) The withdrawal of standards and their replacement by others, if applicable; (2) the correction of errors made by FDA in listing previously recognized standards; and (3) the changes to the supplementary information sheets of recognized standards that describe revisions to the applicability of the standards.
In section III, FDA lists modifications the Agency is making that involve the initial addition of standards not previously recognized by FDA.
Table 1—Modifications to the List of Recognized Standards
Old recognition No. Replacement recognition No. Title of standard 1 Change A. Anesthesia 1-46 1-103 ISO 5367 Fifth edition 2014-10-15 Anaesthetic and respiratory equipment—Breathing sets and connectors Withdrawn and replaced with newer version. 1-82 IEC 60601-2-13 Edition 3.1 2009-08, Medical electrical equipment—Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems Withdrawn. See 1-104. B. Biocompatibility 2-179 2-220 ISO 10993-1 Fourth edition 2009-10-15 Biological evaluation of medical devices—Part 1: Evaluation and Testing within a risk management process [Including: Technical Corrigendum 1 (2010)] Withdrawn and replaced with newer version including Technical Corrigendum. 2-208 2-215 USP 38-NF33:2015 <87> Biological Reactivity Test, In Vitro—Direct Contact Test Withdrawn and replaced with newer version. 2-209 2-216 USP 38-NF33:2015 <87> Biological Reactivity Test, In Vitro—Elution Test Withdrawn and replaced with newer version. 2-210 2-217 USP 38-NF33:2015 <88> Biological Reactivity Tests, In Vivo, Procedure Preparation of Sample Withdrawn and replaced with newer version. 2-211 2-218 USP 38-NF33:2015 <88> Biological Reactivity Test, In Vitro, Classification of Plastics—Intracutaneous Test Withdrawn and replaced with newer version. 2-212 2-219 USP 38-NF33:2015 <88> Biological Reactivity Tests, In Vivo, Classification of Plastics—Systemic Injection Test Withdrawn and replaced with newer version. Start Printed Page 48873 C. Cardiovascular 3-76 ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine The Corrosion Susceptibility of Small Implant Devices Transferred. See 8-177. 3-117 ANSI/AAMI/ISO 81060-2:2013 Non-invasive sphygmomanometers—Part 2: Clinical validation of automated measurement type Extent of recognition. 3-122 ISO 81060-2 Second edition 2013-05-01 Non-invasive sphygmomanometers—Part 2: Clinical validation of automated measurement type Extent of recognition. D. Dental/Ear, Nose, and Throat (ENT) 4-105 ANSI/ADA Standard No.75 (Reaffirmed by ANSI: September 8, 2014) Resilient Lining Materials For Removable Dentures, Part 1: Short-Term Materials Reaffirmation. 4-130 ANSI/ADA Standard No. 17 (Reaffirmed by ANSI: September 8, 2014) Denture Base Temporary Relining Resins Reaffirmation. 4-150 ANSI/ADA Specification No. 19-2004/ISO 4823:2000 (Reaffirmed by ANSI: October 6, 2014) Dental Elastomeric Impression Materials Reaffirmation. 4-184 ANSI/ASA S3.25-2009 (Revision of ANSI S3.25-1989) (Reaffirmed by ANSI September 11, 2014) American National Standard For an Occluded Ear Simulator Reaffirmation. 4-191 4-220 ANSI/ASA S3.22-2014 AMERICAN NATIONAL STANDARD Specification of Hearing Aid Characteristics Withdrawn and replaced with newer version. E. General I (Quality Systems/Risk Management (QS/RM)) 5-67 ANSI/AAMI/IEC 62366:2007/(R)2013 Medical devices—Application of usability engineering to medical devices Withdrawn. See 5-96. 5-87 IEC 62366 Edition 1.1 2014-01 Medical devices—Application of usability engineering to medical devices Withdrawn. See 5-95. 5-94 AAMI/CN20 (PS):2014 Small-bore connectors for liquids and gases in healthcare applications—Part 20: Common test methods Withdrawn. See 5-97. F. General II (Electrical Safety/Electromagnetic Compatibility (ES/EMC)) 19-6 IEC 60601-1-11 Edition 1.0 2010-04 Medical Electrical Equipment—Part 1-11: General Requirements for Basic Safety and Essential Performance—Collateral Standard: Requirements for Medical Electrical Equipment and Medical Electrical Systems used in the Home Healthcare Environment [Including: Technical Corrigendum 1 (2011)] Transition Period Added. G. General Hospital/General Plastic Surgery (GH/GPS) 6-110 ASTM F1441-03 (Reapproved 2014) Standard Specification for Soft-Tissue Expander Devices Reaffirmation. 6-185 ASTM F881−94 (Reapproved 2014) Standard Specification for Silicone Elastomer Facial Implants Reaffirmation. 6-200 ASTM E1061-01 (Reapproved 2014) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers Reaffirmation. 6-274 6-341 ISO 11608-1 Third Edition 2014-12-15 Needle-based injection systems for medical use—Requirements and test methods—Part 1: Needle-based injection systems Withdrawn and replaced with newer version. 6-301 ISO 10555-1 Second Edition 2013-07-01 Sterile, single-use intravascular catheters—Part 1: General requirements Extent of Recognition. 6-308 6-342 IEC 80601-2-35 Edition 2.0 2009-10 Medical electrical equipment—Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use [Including: Technical Corrigendum 1 (2012) and Technical Corrigendum 2 (2015)] Withdrawn and replaced with newer version including Technical Corrigendum. 6-326 6-343 USP 38-NF 33:2015 Sodium Chloride Irrigation Withdrawn and replaced with newer version. 6-327 6-344 USP 38-NF 33:2015 Sodium Chloride Injection Withdrawn and replaced with newer version. 6-328 6-345 USP 38-NF33:2015 Nonabsorbable Surgical Suture Withdrawn and replaced with newer version. 6-329 6-346 USP 38-NF33:2015 <881> Tensile Strength Withdrawn and replaced with newer version. Start Printed Page 48874 6-330 6-347 USP 38-NF33:2015 <861> Sutures—Diameter Withdrawn and replaced with newer version. 6-331 6-348 USP 38-NF33:2015 <871> Sutures—Needle Attachment Withdrawn and replaced with newer version. 6-332 6-349 USP 38-NF33:2015 Sterile Water for Irrigation Withdrawn and replaced with newer version. 6-333 6-350 USP 38-NF33:2015 Heparin Lock Flush Solution Withdrawn and replaced with newer version. 6-334 6-351 USP 38-NF33:2015 Absorbable Surgical Suture Withdrawn and replaced with newer version. H. In Vitro Diagnostics (IVD) 7-110 7-251 CLSI EP05-A3 Evaluation of Precision Performance of Quantitative Measurement Methods; Approved Guideline-Third Edition Withdrawn and replaced with newer version. 7-143 7-252 CLSI EP14-A3 Evaluation of Matrix Effects; Approved Guideline—Third Edition Withdrawn and replaced with newer version. 7-153 7-253 CLSI EP15-A3 User Verification of Performance for Precision and Estimation of Bias; Approved Guideline-Third Edition Withdrawn and replaced with newer version. 7-230 7-254 CLSI M07-A10 Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically; Approved Standard—Ninth Edition Withdrawn and replaced with newer version. 7-123 7-255 CLSI MM09-A2 Nucleic Acid Sequencing Methods in Diagnostic Laboratory Medicine; Approved Guideline—Second Edition Withdrawn and replaced with newer version. 7-247 7-256 CLSI M100-S25 Performance Standards for Antimicrobial Susceptibility Testing; Twenty-Fifth Informational Supplement Withdrawn and replaced with newer version. I. Materials 8-59 8-386 ISO 5832-4 Third edition 2014-09-15 Implants for surgery—Metallic materials—Part 4: Cobalt-chromium-molybdenum casting alloy Withdrawn and replaced newer version. 8-63 8-387 ISO 5832-11 Second edition 2014-09-15 Implants for surgery—Metallic materials—Part 11: Wrought titanium 6-aluminium 7-niobium alloy Withdrawn and replaced with newer version. 8-177 ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices Updated to incorporate transferred recognitions 3-76 and 17-9. J. Neurology 17-9 ASTM F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices Transferred. See 8-177. 17-4 ASTM F647-94(2014) Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application Reaffirmation. K. Obstetrics-Gynecology-Urology-Gastroenterology (OB-GYN-GU)/Gastroenterology 9-73 9-104 ANSI/AAMI/ISO 13958:2014 Concentrates for hemodialysis and related therapies Withdrawn and replaced with newer version. 9-97 ISO 13958 Third edition 2014-04-01 Concentrates for haemodialysis and related therapies Extent of recognition. 9-69 9-105 ANSI/AAMI 13959:2014 Water for hemodialysis and related therapies Withdrawn and replaced with newer version. 9-100 ISO 11663 Second edition 2014-04-01 Quality of dialysis fluid for haemodialysis and related therapies Extent of recognition. 9-71 9-106 ANSI/AAMI/ISO 11663:2014 Quality of dialysis fluid for hemodialysis and related therapies Withdrawn and replaced with newer version. 9-70 9-107 ANSI/AAMI 23500:2014 Guidance for the preparation and quality management of fluids for hemodialysis and related therapies Withdrawn and replaced with newer version. 9-102 ISO 4074 Second edition 2014-08-15 Natural latex rubber condoms—Requirements and test methods Extent of recognition. 9-90 9-108 ISO 8009 Second edition 2014-11-15 Mechanical contraceptives—Reusable natural and silicone rubber contraceptive diaphragms—Requirements and tests Withdrawn and replaced with newer version. 9-56 9-109 ASTM D3492-08 Standard Specification for Rubber Contraceptives (Male Condoms) Withdrawn and replaced with newer version. Start Printed Page 48875 L. Ophthalmic 10-29 10-94 ISO 14730 Second edition 2014-10-01 Ophthalmic Optics—Contact lens care products—antimicrobial preservative efficacy testing and guidance on determining discard date Withdrawn and replaced with newer version. 10-55 10-95 ISO 11979-6 Third edition 2014-10-01 Ophthalmic implants—intraocular lenses—Part 6: Shelf-life and transport stability Withdrawn and replaced with newer version. 10-62 10-96 ANSI Z80.10-2014 American National Standard for Opthalmics Ophthalmic Instruments—Tonometers Withdrawn and replaced with newer version. 10-68 10-97 ISO 13212 Third edition 2014-09-01 Ophthalmic Optics-Contact lens care products—Guidelines for determination of shelf-life Withdrawn and replaced with newer version. 10-82 10-98 ISO 11979-2 Second edition 2014-08-15 Ophthalmic implants—Intraocular lenses—Part 2: Optical properties and test methods Withdrawn and replaced with newer version. M. Orthopedic 11-240 11-287 ASTM F382-14 Standard Specification and Test Method for Metallic Bone Plates Withdrawn and replaced newer version. 11-235 11-288 ASTM F2077-14 Test Methods for Intervertebral Body Fusion Devices Withdrawn and replaced with newer version. 11-207 11-289 ASTM F2193-14 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System Withdrawn and replaced with newer version. 11-183 ASTM F1875-98 (Reapproved 2014) Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface Reaffirmation. 11-266 ASTM F2665-09 (Reapproved 2014) Standard Specification for Total Ankle Replacement Prosthesis Reaffirmation. 11-224 ASTM F2706-08 (Reapproved 2014) Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model. Reaffirmation. 11-80 11-290 ISO 8828 Second edition 2014-11-15 Implants for surgery—Guidance on Care and Handling of Orthopaedic Implants Withdrawn and replaced with newer version. 11-248 11-291 ISO 14242-1 Third edition 2014-10-15 Implants for surgery—Wear of total hip-joint prostheses—Part 1: Loading and displacement parameters for wear testing machines and corresponding environmental conditions for test Withdrawn and replaced with newer version. 11-250 11-292 ISO 14243-3 Second edition 2014-11-01 Implants for surgery—Wear of total knee prostheses—Part 3: Loading and displacement parameters for wear—testing machines with displacement control and corresponding environmental conditions for test Withdrawn and replaced with newer version. N. Radiology 12-102 ANSI/IESNA RP-27.2-2000 (Reaffirmed 2011) Photobiological Safety for Lamp & Lamp Systems-Measurement Techniques Reaffirmation. 12-212 12-289 IEC 62220-1-1 Edition 1.0 2015-03 Medical electrical equipment—Characteristics of digital x-ray imaging devices—Part 1-1: Determination of the detective quantum efficiency—Detectors used in radiographic imaging Withdrawn and replaced with newer version. 12-229 12-290 IEC 61910-1 Edition 1.0 2014-09 Medical electrical equipment—Radiation dose documentation—Part 1: Radiation dose structured reports for radiography and radioscopy Withdrawn and replaced with newer version. 12-278 12-291 IEC 62127-2 Edition 1.1 2013-02 Ultrasonics Hydrophones—Part 2: Calibration for ultrasonic fields up to 40 MHz Withdrawn and replaced with newer version. O. Sterility 14-193 14-457 ANSI/AAMI/ISO 11607-1:2006/(R)2010 Packaging for terminally sterilized medical devices—Part 1: Requirements for materials, sterile barrier systems and packaging [Including: Amendment 1 (2014)] Withdrawn and replaced with newer version including Amendment. 14-194 14-458 ANSI/AAMI/ISO 11607-2:2006/(R)2010 Packaging for terminally sterilized medical devices—Part 2: Validation requirements for forming, sealing and assembly processes[Including: Amendment 1 (2014)] Withdrawn and replaced with newer version including Amendment. 14-195 14-459 ANSI/AAMI/ISO 11140-1:2014 Sterilization of health care products—Chemical indicators—Part 1: General requirements Withdrawn and replaced with newer version. 14-287 ANSI/AAMI/ISO 11737-2:2009/(R)2014 Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process Reaffirmation. Start Printed Page 48876 14-297 14-461 ANSI/AAMI/ISO 11137-1:2006/(R) 2010 Sterilization Of Health Care Products—Radiation—Part 1: Requirements For Development, Validation, And Routine Control Of A Sterilization Process For Medical Devices [Including: Amendment 1 (2013)] Withdrawn and replaced with newer version including Amendment. 14-300 14-462 ASTM D4169—14 Standard Practice for Performance Testing of Shipping Containers and Systems Withdrawn and replaced with newer version. 14-327 ISO 11737-2 Second edition 2009-11-15 Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process Extent of Recognition. 14-350 ANSI/AAMI/ISO 13408-4:2005/(R)2014, Aseptic processing of health care products—Part 4: Clean-in-place technologies Reaffirmation. 14-353 14-460 ISO 11140-1 Third edition 2014-11-01 Sterilization of health care products—Chemical indicators—Part 1: General requirements Withdrawn and replaced with newer version. 14-391 14-463 ISO/ASTM 51608 Third edition 2015-03-15 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 KeV and 7.5 MeV Withdrawn and replaced with newer version. 14-392 14-464 ISO/ASTM 51649 Third edition 2015-03-15 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV Withdrawn and replaced with newer version. 14-431 14-465 ISO/ASTM 51707 Third edition 2015-03-15 Guide for estimation of measurement uncertainty in dosimetry for radiation processing Withdrawn and replaced with newer version. 14-440 14-466 USP 38-NF33:2015 <61> Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests Withdrawn and replaced with newer version. 14-441 14-467 USP 38-NF33:2015 <71> Sterility Tests Withdrawn and replaced with newer version. 14-442 14-468 USP 38-NF33:2015 <85> Bacterial Endotoxins Test Withdrawn and replaced with newer version. 14-443 14-477 USP 38-NF33:2015 <151> Pyrogen Test (USP Rabbit Test) Withdrawn and replaced with newer version. 14-444 14-469 USP 38-NF33:2015 <161> Transfusion and Infusion Assemblies and Similar Medical Devices Withdrawn and replaced with newer version. 14-445 14-470 USP 38-NF33:2015 Biological Indicator for Steam Sterilization—Self Contained Withdrawn and replaced with newer version. 14-446 14-471 USP 38-NF33:2015 Biological Indicator for Dry-Heat Sterilization, Paper Carrier Withdrawn and replaced with newer version. 14-447 14-472 USP 38-NF33:2015 Biological Indicator for Ethylene Oxide Sterilization, Paper Carrier Withdrawn and replaced with newer version. 14-448 14-473 USP 38-NF33:2015 Biological Indicator for Steam Sterilization, Paper Carrier Withdrawn and replaced with newer version. 14-449 14-474 USP 38-NF33:2015 <62> Microbiological Examination of Nonsterile Products: Tests for Specified Microorganisms Withdrawn and replaced with newer version. 14-450 14-475 USP 38-NF33:2015 <55> Biological Indicators—Resistance Performance Tests Withdrawn and replaced with newer version. 14-451 14-476 USP 38-NF33:2015 <1035> Biological Indicators for Sterilization Withdrawn and replaced with newer version. 1 All standard titles in this table conform to the style requirements of the respective organizations. III. Listing of New Entries
In table 2, FDA provides the listing of new entries and consensus standards added as modifications to the list of recognized standards under Recognition List Number: 040.
Table 2—New Entries to the List of Recognized Standards
Recognition No. Title of standard 1 Reference No. and date A. Anesthesia 1-104 Medical electrical equipment—Part 2-13: Particular Requirements for basic safety and essential performance of an anaesthetic workstation [Including: Amendment 1 (2015)] ISO 80601-2-13 First Edition 2011-08-01 and Amendment 1 2015. 1-105 Medical electrical equipment—Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients ISO 80601-2-72 First Edition 2015-04-11. Start Printed Page 48877 B. Biocompatibility 2-221 Biological Evaluation of Medical Devices: Part 2—Animal Welfare Requirements ANSI/AAMI/ISO 10993-2:2006 (R2014). 2-222 Biological Evaluation of Medical Devices: Part 2—Animal Welfare Requirements ISO 10993-2 Second edition 2006-07-15. C. Cardiovascular 3-135 Cardiovascular implants and extracorporeal systems—Vascular device-drug combination products ISO/TS 12417-1 First edition 2011-06-01. 3-136 Cardiovascular implants and extracorporeal systems—Vascular device-drug combination products ANSI/AAMI/ISO TIR12417:2011. 3-137 Standard Guide for Testing Absorbable Stents ASTM F3036-13. 3-138 Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents ASTM F2942-13. 3-139 Active implantable medical devices—Electromagnetic compatibility—EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices ISO 14117 First edition 2012-07-15. D. General I (Quality Systems/Risk Management) 5-95 Medical devices—Part 1: Application of usability engineering to medical devices IEC 62366-1 Edition 1.0 2015-02. 5-96 Medical devices—Part 1: Application of usability engineering to medical devices ANSI/AAMI/IEC 62366-1:2015. 5-97 Small-bore connectors for liquids and gases in healthcare applications—Part 20: Common test methods ISO 80369-20 First edition 2015-05-15. E. General II (ES/EMC) 19-14 Medical electrical equipment—Part 1-11: General requirements for basic safety and essential performance—Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment IEC 60601-1-11 Edition 2.0 2015-01. 19-15 Medical electrical equipment—Part 1-12: General requirements for basic safety and essential performance—Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment IEC 60601-1-12 Edition 1.0 2014-06. F. GH/GPS 6-352 Standard Specification for Implantable Breast Prostheses ASTM F703-07. 6-353 Standard Specification for Implantable Saline Filled Breast Prosthesis ASTM F2051−00 (Reapproved 2014). 6-354 Standard Specification for Radiation Attenuating Protective Gloves ASTM D7866-14. G. IVD 7-257 Principles and procedures for Detection of Anaerobes in Clinical Specimens; Approved Guideline CLSI M56-A. 7-258 Performance Standards for Antimicrobial Disk Susceptibility Tests; Approved Standards- Twelfth Edition CLSI M02-A12. H. Materials 8-388 Implants for surgery—Ceramic materials—Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement ISO 6474-2 First edition 2012-04-15. 8-389 Implants for surgery—Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices ISO 15309 First edition 2013-12-01. 8-390 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants ASTM F1925-09. 8-391 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal To 70% Glycolide ASTM F2313-10. I. Nanotechnology 18-4 Technical Specification—Nanotechnologies—Vocabulary—Part 6: Nano-object characterization ISO/TS 80004-6 First edition 2013-11-01. J. Neurology 17-14 Transcutaneous electrical nerve stimulators ANSI/AAMI NS4:2013. Start Printed Page 48878 K. OB-GYN-GU/Gastroenterology 9-103 Water treatment equipment for hemodialysis and related therapies ANSI/AAMI 26722:2014. L. Ophthalmic 10-99 Anionic and non-ionic surface active agents—Determination of critical micellization concentration—Method by measuring surface tension with a plate, stirrup, or ring, ISO 4311 First edition 1979-06-01. M. Orthopedic 11-293 Standard Test Method for Impingement of Acetabular Prostheses ASTM F2582-14. 11-294 Standard Specification for Articulating Total Wrist Implants ASTM F1357-14. 11-295 Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis ASTM F2580-13. N. Physical Medicine 16-194 Wheelchairs Part 25:Batteries and chargers for powered wheelchairs ISO 7176-25 First edition 2013-07-15. O. Radiology 12-292 IEEE Recommended Practice for Three-Dimensional (3D) Medical Modeling IEEE Std 3333.2.1-2015. P. Software/Informatics 13-73 Systematized Nomenclature of Medicine—Clinical Terms IHTSDO SNOME-CT RF2 Release 2015. 13-74 Health informatics—Personal health device communication, Part 10424: Device Specialization—Sleep Apnoea Breathing Therapy Equipment (SABTE) IEEE Std 11073-10424-2014. 13-75 Health informatics—Point-of-care medical device communication—Part 10102: Nomenclature—Annotated ECG ISO/IEEE 11073-10102 First edition 2014-03-01. 13-76 Health informatics—Standard communication protocol—Part 91064: Computer-assisted electrocardiography ISO 11073-91064 First edition 2009-05-01. 13-77 Information technology—Security techniques—Vulnerability disclosure ISO/IEC 29147 First edition 2014-02-15. 13-78 Information technology—Security techniques—Vulnerability handling processes ISO/IEC 30111 First edition 2013-11-01. Q. Sterility 14-478 Flexible and semi-rigid endoscope processing in health care facilities ANSI/AAMI ST91:2015. 1 All standard titles in this table conform to the style requirements of the respective organizations. IV. List of Recognized Standards
FDA maintains the Agency's current list of FDA Recognized Consensus Standards in a searchable database that may be accessed directly at FDA's Internet site at http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfStandards/search.cfm. FDA will incorporate the modifications and revisions described in this notice into the database and, upon publication in the Federal Register, this recognition of consensus standards will be effective. FDA will announce additional modifications and revisions to the list of recognized consensus standards, as needed, in the Federal Register once a year, or more often if necessary. Beginning with Recognition List 033, FDA no longer announces minor revisions to the list of recognized consensus standards such as technical contact person, devices affected, processes affected, Code of Federal Regulations citations, and product codes.
V. Recommendation of Standards for Recognition by FDA
Any person may recommend consensus standards as candidates for recognition under section 514 of the FD&C Act by submitting such recommendations, with reasons for the recommendation, to standards@cdrh.fda.gov. To be properly considered, such recommendations should contain, at a minimum, the following information: (1) Title of the standard, (2) any reference number and date, (3) name and address of the national or international standards development organization, (4) a proposed list of devices for which a declaration of conformity to this standard should routinely apply, and (5) a brief identification of the testing or performance or other characteristics of the device(s) that would be addressed by a declaration of conformity.
VI. Electronic Access
You may obtain a copy of “Guidance on the Recognition and Use of Consensus Standards” by using the Internet. The Center for Devices and Radiological Health (CDRH) maintains a site on the Internet for easy access to information including text, graphics, and files that you may download to a personal computer with access to the Internet. Updated on a regular basis, the CDRH home page, http://www.fda.gov/MedicalDevices,, includes a link to standards-related documents including the guidance and the current list of recognized standards. After publication in the Federal Register, this notice announcing “Modification to the List of Start Printed Page 48879Recognized Standards, Recognition List Number: 040” will be available at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/Standards/ucm123792.htm. You may access “Guidance on the Recognition and Use of Consensus Standards,” and the searchable database for “FDA Recognized Consensus Standards” at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/Standards.
VII. Submission of Comments and Effective Date
Interested persons may submit either electronic comments regarding this document to http://www.regulations.gov or written comments to the Division of Dockets Management (see ADDRESSES). It is only necessary to send one set of comments. Identify comments with the docket number found in brackets in the heading of this document. Received comments may be seen in the Division of Dockets Management between 9 a.m. and 4 p.m., Monday through Friday, and will be posted to the docket at http://www.regulations.gov. FDA will consider any comments received in determining whether to amend the current listing of modifications to the list of recognized standards, Recognition List Number: 040. These modifications to the list of recognized standards are effective upon publication of this notice in the Federal Register.
Start SignatureDated: August 10, 2015.
Leslie Kux,
Associate Commissioner for Policy.
[FR Doc. 2015-19991 Filed 8-13-15; 8:45 am]
BILLING CODE 4164-01-P
Document Information
- Published:
- 08/14/2015
- Department:
- Food and Drug Administration
- Entry Type:
- Notice
- Action:
- Notice.
- Document Number:
- 2015-19991
- Dates:
- Submit electronic or written comments concerning this document at any time. See section VII for the effective date of the recognition of standards announced in this document.
- Pages:
- 48871-48879 (9 pages)
- Docket Numbers:
- Docket No. FDA-2004-N-0451, formerly Docket No. 2004N-0226
- PDF File:
- 2015-19991.pdf
- Supporting Documents:
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 058
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 056
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 054
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 053
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 052
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 051
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 049
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 047
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 043
- » Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized Standards, Recognition List Number: 041