2021-17893. Certain New Chemicals; Receipt and Status Information for July 2021  

  • Start Preamble

    AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Notice.

    SUMMARY:

    EPA is required under the Toxic Substances Control Act (TSCA) to make information publicly available and to publish information in the Federal Register pertaining to certain submissions under TSCA, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 07/01/2021 to 07/31/2021.

    DATES:

    Comments identified by the specific case number provided in this document must be received on or before September 20, 2021.

    ADDRESSES:

    Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2021-0068 and the specific case number for the chemical substance related to your comment, using the Federal eRulemaking Portal at http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/​dockets.

    Due to the public health concerns related to COVID-19, the EPA Docket Center (EPA/DC) and Reading Room is closed to visitors with limited exceptions. The staff continues to provide remote customer service via email, phone, and webform. For the latest status information on EPA/DC services and docket access, visit https://www.epa.gov/​dockets.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    For technical information contact: Jim Rahai, Project Management and Operations Division (MC 7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.

    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Executive Summary

    A. What action is the Agency taking?

    This document provides the receipt and status reports for the period from 07/01/2021 to 07/31/2021. The Agency is providing notice of receipt of PMNs, SNUNs and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.

    EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

    B. What is the Agency's authority for taking this action?

    Under TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be either an “existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory please go to: https://www.epa.gov/​tsca-inventory.

    Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3).

    TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/​oppt/​newchems.

    Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.

    C. Does this action apply to me?

    This action provides information that is directed to the public in general.

    D. Does this action have any incremental economic impacts or paperwork burdens?

    No.

    E. What should I consider as I prepare my comments for EPA?

    1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI Start Printed Page 46844information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

    2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/​dockets/​comments.html.

    II. Status Reports

    In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See 60 FR 25798, May 12, 1995 (FRL-4942-7)). Since the passage of amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

    III. Receipt Reports

    For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.

    As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” (e.g., P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.

    Table I—PMN/SNUN/MCANs Approved * From 07/01/2021 to 07/31/2021

    Case No.VersionReceived dateManufacturerUseChemical substance
    J-21-0019A407/12/2021CBI(G) Production of DNA for use in internal manufacturing(G) Strain of Escherichia coli modified with genetically-stable, plasmid-borne DNA for the production of plasmid-borne DNA.
    P-19-0160A407/21/2021CBI(S) Component of a UV curable printing ink(G) Alkanesulfonic acid, 2-[(2-aminoethyl)heteroatom-substituted]-, sodium salt (1:1), polymer with alpha-[2,2-bis(hydroxymethyl)butyl]-omega-methoxypoly(oxy-1,2-ethanediyl) and 1,1′-methylenebis[4-isocyanatocyclohexane], acrylic acid-dipenthaerythritol reaction products- and polypropylene glycol ether with pentaerythritol (4:1) triacrylate-blocked.
    P-19-0165A507/06/2021Arboris, LLC(G) Plasticizer in rubber, Additive for asphalt.(G) Tall oil pitch, fraction, sterol-low.
    P-20-0071A1006/30/2021CBI(G) Colorant(G) Salt of 2-Naphthalenesulfonic acid, hydroxy [(methoxy-methyl-4-sulfophenyl)diazenyl].
    P-20-0078A806/29/2021Ascend Performance Materials(G) Stabilizer for industrial applications(G) Dicarboxylic acid, compd. with aminoalkyl-alkyldiamine alkyldioate alkyldioate (1:2:1:1).
    P-20-0079A806/29/2021Ascend Performance Materials(G) Stabilizer for industrial applications(G) Dicarboxylic acid, compd. with aminoalkyl-alkyldiamine (3:2).
    P-20-0080A1106/29/2021Ascend Performance Materials(G) Stabilizer for industrial applications(G) Alkyldiamine, aminoalkyl-, hydrochloride (1:3).
    P-20-0081A1106/29/2021Ascend Performance Materials(G) A stabilizer for industrial applications(G) Carboxylic acid, compd. with aminoalkyl-alkyldiamine (3:1).
    P-20-0082A1106/29/2021Ascend Performance Materials(G) Stabilizer for industrial applications(G) Alkyldiamine, aminoalkyl-, carboxylate (1:3).
    P-20-0148A907/22/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
    P-20-0149A907/22/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
    P-20-0150A907/22/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
    P-20-0151A907/22/2021Solugen Inc(G) Additive for consumer, industrial, and commercial uses(G) Hydroxyalkanoic acid, salt, oxidized.
    P-20-0175A507/16/2021CBI(G) Proprietary Additive for WB&P, Slats & CR, PI Formulation(G) acid N-[4-(4-diarylalkyl]-, carbopolycyclic alkenyl, methyl ester.
    Start Printed Page 46845
    P-20-0176A507/16/2021CBI(G) Proprietary Additive for WB&P, Slats & CR, PI Formulation(G) acid N-(diarylalkyl)-, carbopolycyclic alkenyl, methyl ester.
    P-20-0177A507/16/2021CBI(G) Proprietary Additive for WB&P, Slats & CR, PI Formulation(G) carbopolycyclic alkenyl, 2-carboxylic acid, 2-[[[4-(4-diarylalkyl)]carbonyl]oxy]ethyl ester.
    P-20-0178A.507/16/2021CBI(G) Proprietary Additive for WB&P, Slats & CR, PI Formulation(G) carbopolycyclic alkenyl, 2-carboxylic acid, 2-[[[(diarylalkyl)]carbonyl]oxy]ethyl ester.
    P-21-0049A207/16/2021CBI(G) Monomer(G) Alkanoic acid, polyhalo-(halo-oxo-alkenyl)oxyalkyl ester.
    P-21-0050A207/16/2021CBI(G) Monomer(G) Alkenoic acid, halo-polylhaloalkyl ester.
    P-21-0109A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light alkylate.
    P-21-0110A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light catalytic cracked.
    P-21-0111A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic cracked.
    P-21-0112A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, light hydrocracked.
    P-21-0113A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, isomerization.
    P-21-0114A506/30/2021Chevron EL Segundo refinery(G) Component in fuels(G) Hydrocarbons linear and branched, heavy catalytic reformed.
    P-21-0133A407/14/2021CBI(S) Chemical Intermediate(G) Distillation bottoms from manufacture of alkanoic acid by organic acid-producing organism, modified.
    P-21-0144A207/19/2021Chevron(G) Gasoline(G) Naphtha, heavy catalytic cracked.
    P-21-0145A207/19/2021Chevron(G) Gasoline(G) Naphtha, heavy alkylate.
    P-21-0146A207/19/2021Chevron(G) Gasoline(G) Naphtha, full range alkylate, butane-contg.
    P-21-0147A207/19/2021Chevron(G) Gasoline(G) Naphtha, hydrotreated heavy.
    P-21-0148A307/22/2021Chevron(G) Gasoline(G) Naphtha, light catalytic cracked.
    P-21-0149A307/22/2021Chevron(G) Aviation gasoline(G) Naphtha, light alkylate.
    P-21-0150A307/22/2021Chevron(G) Gasoline(G) Naphtha, hydrotreated light.
    P-21-0152A407/22/2021Chevron(G) Marine fuel(G) Clarified oils, catalytic cracked.
    P-21-0153A407/22/2021Chevron(G) Chemical intermediate(G) Distillates, hydrotreated heavy.
    P-21-0154A407/22/2021Chevron(G) Chemical intermediate(G) Gas Oils hydrotreated vacuum.
    P-21-0155A307/22/2021Chevron(G) Diesel fuel(G) Distillates, light catalytic cracked.
    P-21-0156A307/22/2021Chevron(G) Jet fuel(G) Distillates, clay-treated middle.
    P-21-0157A307/22/2021Chevron(G) Diesel fuel(G) Distillates, hydrotreated middle.
    P-21-0158A307/22/2021Chevron(G) Jet fuel(G) Distillates, hydrotreated light.
    P-21-0159A407/22/2021Chevron(G) Chemical intermediate(G) Gases, C3-C4.
    P-21-0160A407/22/2021Chevron(G) Chemical intermediate(G) Gases, C4-rich.
    P-21-0161A407/22/2021Chevron(G) Chemical intermediate(G) Gases, catalytic cracking.
    P-21-0162A407/22/2021Chevron(G) Chemical intermediate(G) Residues, butane splitter bottoms.
    P-21-0163A407/22/2021Chevron(G) Chemical intermediate(G) Tail gas, saturate gas plant mixed stream, C4-rich.
    P-21-0168106/15/2021Epson America, Inc(G) Colorant(G) Metal, [heteropolycyclic]-, [[[(hydroxyalkyl)amino]sulfonyl]alkyl]sulfonyl(sulfoalkyl)sulfonyl derivs., ammonium sodium salts.
    P-21-0170307/21/2021Oxford Biomedical Research, Inc(G) This dye changes from dark blue with new frying oil, to light yellow with used/bad frying oil(G) 2,6-Bis(dialkyl)-4-[2-(1-alkyl-4(1H)-pyridinylidene)alkylidene]-2,5-cycloalkyladien-1-one.
    P-21-0171507/14/2021CBI(S) Surfactant(G) Oxirane, methyl-, polymer with oxirane, alkyl ether carboxylates, Alkyl ether acetate,.
    P-21-0173207/07/2021ICM Products Inc.(G) Additive for finishing of textiles/fabrics(G) Siloxanes and silicones polyether, polymer with aliphatic isocyanate, 2-dimethylaminoethanol and polyglycol ether.
    P-21-0177207/12/2021CBI(G) Photolithography(G) Sulfonium, monocarbocyclicbisarylpolyhaloalkyl, alpha, alpha, beta, beta-polyhalopolyhydro-2,2-diaryl-4,7-methano-1,3-heteropolycyclic-5-alkanesulfonate (1:1).
    P-21-0180207/01/2021Shin-etsu microsi(G) Contained use for microlithography for electronic device manufacturing(G) Sulfonium, (halocarbomonocycle)diphenyl-, salt with 1-heterosubstituted-2-methylalkyl trihalobenzoate (1:1).
    P-21-0181207/12/2021CBI(G) Color developer(G) 1,3-Benzenedicarboxamide, N1,N3-bis(carbomonocyclic)-5-[[(carbomonocyclic)amino]sulfonyl]-.
    P-21-0182106/29/2021CBI(S) Chemical intermediate(G) Distillation bottoms from manufacture of alkanoic acid by organic acid-producing organism.
    P-21-0182A207/14/2021CBI(S) Chemical intermediate(G) Distillation bottoms from manufacture of alkanoic acid by organic acid-producing organism.
    P-21-0183106/29/2021CBI(S) Chemical intermediate(G) Distillation bottoms from manufacture of alkanoic acid by organic acid-producing organism, modified.
    P-21-0183A207/14/2021CBI(S) Chemical intermediate(G) Distillation bottoms from manufacture of alkanoic acid by organic acid-producing organism, modified.
    P-21-0184207/14/2021CBI(G) Asphalt emulsion applications(S) Fatty acids, Soya, reaction products with ammonia-ethanolamine reaction by-products.
    Start Printed Page 46846
    P-21-0185407/07/2021CBI(S) The notified substance will be used as a fragrance ingredient, being blended (mixed) with other fragrance(G) Ethyl Cyclohexenyl Propionate;(G) Ethyl Cyclohexenyl Propionate;.
    P-21-0186207/20/2021Tetramer Technologies, LLC(G) Component in lubricants(G) glycerin, alkoxylated alkyl acid esters.
    P-21-0187207/20/2021Tetramer Technologies, LLC(G) Component in lubricants(G) glycerin, alkoxylated alkyl acid esters.
    P-21-0188107/12/2021CBI(S) Polymer intermediate(G) 2-Propenoic acid, 2-methyl-, polymer with 2-propenoic acid and phosphinate salt, peroxy-initiated.
    P-21-0189207/16/2021Renewable energy group(S) Feedstock used in the production of biomass based diesel(S) Fats and Glyceridic oils, algae.
    P-21-0190107/13/2021Santolubes Manufacturing LLC(S) Synthetic engine, gear and lubricating oils and greases(S) Poly(oxy-1,2-ethanediyl)-alpha-(1-oxohexyl)-omega-[(1-oxohexyl)oxy]-.
    P-21-0191107/13/2021Santolubes Manufacturing LLC(S) Synthetic engine, gear and lubricating oils and greases(S) Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with polyethylene glycol, dihexanoates.
    P-21-0192107/13/2021Santolubes Manufacturing LLC(S) Synthetic engine, gear and lubricating oils and greases(S) Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with polyethylene glycol, diesters with C8-10 fatty acids.
    P-21-0193207/16/2021Santolubes Manufacturing LLC(S) Synthetic engine, gear and lubricating oils and greases(S) Fatty acids, C8-10, diesters with polyethylene glycol.
    P-21-0194107/14/2021Rudolf Venture Chemical(S) Textile softening agent(G) Siloxanes and Silicones, di-Me, [gluconoylamino)alkyl]dialkylammonio]-hydroxyalkoxy]alkyl group-terminated, (salts).
    P-21-0196107/21/2021CBI(S) Additive for use in battery electrolyte formulations(G) Oxathiole, oxide.
    P-21-0197107/22/2021Ultium Cells LLC(S) Additive for use in battery electrolyte formulations(G) Imidazole-carboxylic acid, substituted.
    P-21-0198107/22/2021H.B. Fuller Company(S) Hot melt moisture cure adhesive for the industrial Floor & Door industry(G) Reaction product of polyester with alpha-hydro-omega-hydroxypoly(oxy-1,4-butanediyl) and 1,1′-methylenebis[isocyanatobenzene].
    SN-21-0005207/21/2021CBI(G) Dielectric medium(S) Propanenitrile, 2,3,3,3-tetrafluoro-2-(trifluoromethyl)-.
    SN-21-0010A207/06/2021CBI(G) Additive used in coatings(G) 2-Oxepanone, reaction products with alkylenediamine-alkyleneimine polymer, 2-[[(2-alkyl)oxy]alkyl]oxirane and tetrahydro-2H-pyran-2-one.
    SN-21-0011207/14/2021CBI(G) Solvent(S) 2-Propanol, 1-[bis(2-hydroxyethyl)amino]-.
    * The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.

    In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.

    Table II—NOCs Approved * From 07/01/2021 to 07/31/2021

    Case No.Received dateCommencement dateIf amendment, type of amendmentChemical substance
    P-00-006307/06/202101/01/2012N(G) Zinc salt of thioorganic compound.
    P-17-017807/08/202107/03/2021N(G) Sulfonium, triphenyl-, salt with substituted-alkyl 4-substituted-benzoate,.
    P-18-001307/08/202106/30/2021N(G) Substituted-triphenylsulfonium, inner salt,.
    P-18-029807/22/202106/29/2021N(G) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with n1,n2-bis(2-aminoethyl)-1,2-ethanediamine, 2-(chloromethyl)oxirane, 2-[[4-(1,1-dimethylethyl)phenoxy]methyl]oxirane, 2,2′-[1,6-hexanediylbis(oxymethylene)]bis[oxirane], 4,4′-(1-methylethylidene)bis[phenol], alkyl ether amine, and 2-[(2-methylphenoxy methyl]oxirane.
    P-19-005407/01/202106/22/2021N(G) Polyamines, reaction products with succinic anhydride polyalkenyl derivs., metal salts.
    P-19-007907/08/202106/30/2021N(G) Substituted heterocyclic onium compound, salt with 2,2,2-trifluoro-1-(sulfomethyl)-1-(trifluoromethyl)ethyl 3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]tricyclo[3.3.1.13,7]decane-1-carboxylate (1:1), polymer with acenaphthylene, 1-ethenyl-4-[[1-(1-methylethyl)cyclopentyl]oxy]benzene and 4-ethenylphenol, di-me 2,2′-(1,2-diazenediyl)bis[2-methylpropanoate]-initiated,.
    Start Printed Page 46847
    P-19-013307/08/202107/03/2021N(G) Heterotrisubstituted-bile acid, 1-(difluorosulfomethyl)-2,2,2-trifluoroethyl ester, ion(1-), (5)-, triphenylsulfonium (1:1),.
    P-20-015306/29/202106/15/2021N(S) Amines, polyethylenepoly-, reaction products with succinic anhydride polyisobutenyl derivs., borated.
    P-20-015406/29/202106/15/2021N(S) 2,5-furandione, dihydro-, polyisobutenyl derivs., reaction products with triethylenetetramine, borated.
    P-21-002007/30/202107/29/2021N(G) Alkanedioic acid, dialkyl ester, polymer with dialkyl-alkanediol, alkyl(substituted alkyl)-alkanediol and heteropolycycle.
    * The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission.

    In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.

    Table III—Test Information Received From 07/01/2021 to 07/31/2021

    Case No.Received dateType of test informationChemical substance
    P-14-071207/09/2021Quarterly PCDD/F Test of PMN Substance using EPA Test Method 8290A(G) Plastics, wastes, pyrolyzed, bulk pyrolysate.
    P-14-071207/09/2021Quarterly PCDD/F Test of PMN Substance using EPA Test Method 8290A(G) Plastics, wastes, pyrolyzed, bulk pyrolysate.
    P-16-046207/27/2021Quarter 2 Metals Report(G) Silane-treated aluminosilicate.
    P-16-054306/29/2021Exposure Monitoring Report May 2021(G) Halogenophosphoric acid metal salt.

    If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available.

    Authority: 15 U.S.C. 2601 et seq.

    Start Signature

    Dated: August 12, 2021.

    Pamela Myrick,

    Director, Project Management and Operations Division, Office of Pollution Prevention and Toxics.

    End Signature End Supplemental Information

    [FR Doc. 2021-17893 Filed 8-19-21; 8:45 am]

    BILLING CODE 6560-50-P