00-21200. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 22, 2000 to June 23, 2000, consists of the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51948 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Office of Program Management, and Evaluation, Office of Pollution Prevention and Toxics (7401), Office of Pollution Prevention and Toxics, Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone numbers: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the “Federal Register” listings at http://www.epa.gov/​fedrgstr/.

2. In person. The Agency has established an official record for this action under docket control number OPPTS-51948. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is [phone].

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51948 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

3. Electronically. You may submit your comments electronically by e-mail to: “[e-mail],” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51948 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 22, 2000 to June 23, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 131 Premanufacture Notices Received From: 05/22/00 to 06/23/00

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-00-0836	05/22/00	08/20/00	Ashland Inc.	(G) Adhesive	(G) Modified copolymer of acrylic esters and styrene
P-00-0837	05/22/00	08/20/00	Dow Corning Corporation	(S) Filler treatment	(S) Cyclosiloxanes, di-me, me vinyl*
P-00-0838	05/22/00	08/20/00	Eastman Kodak Company	(G) Contained use in an article	(G) Substituted alkylsulfonamide
P-00-0839	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, chlorosulfurized
P-00-0840	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, chlorosulfurized
P-00-0841	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, chlorosulfurized
P-00-0842	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, sulfurized
P-00-0843	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, sulfurized
P-00-0844	05/22/00	08/20/00	Harwick Chemical Manufacturing Corporation	(S) Solid plasticizer for rubber	(G) Vegetable oil, sulfurized
P-00-0845	05/23/00	08/21/00	CBI	(G) Impact modifier for epoxy resin	(G) Epoxy nitrile rubber amine adduct
P-00-0846	05/23/00	08/21/00	CBI	(S) Inks; coatings	(G) Polyester acrylate
P-00-0847	05/24/00	08/22/00	CBI	(S) Component of wire enamels used in electrical industry	(G) Cresol-blocked isocyanate
P-00-0848	06/02/00	08/31/00	Denka Corporation	(S) Expansive additive for concrete	(S) Limestone, reaction product with bauxite and gypsum
P-00-0849	05/25/00	08/23/00	Nova Molecular Technologies, Inc.	(S) Corrosion inhibitor; chemical intermediate; extraction solvent	(S) Morpholine, 4-(1,1-dimethylethyl)-*
P-00-0850	05/26/00	08/24/00	Inx International Ink Company	(G) Dispersing agent	(G) Phenol, polymer with formaldehyde, glycidyl ether, reaction products with carbomonocyclic carboxylic acid and hydroxy alkanoic acid homopolymer
P-00-0851	05/26/00	08/24/00	Bic USA Inc.	(G) A colorant for inks	(G) C.i. solvent blue 38
P-00-0852	05/26/00	08/24/00	Bic USA Inc.	(G) A colorant for inks	(G) C.i. solvent blue 38
P-00-0853	05/26/00	08/24/00	Bic USA Inc.	(G) A colorant for inks	(G) C.i. solvent blue 37
P-00-0854	05/26/00	08/24/00	Bic USA Inc.	(G) A colorant for inks	(G) C.i. solvent blue 37
P-00-0855	05/25/00	08/23/00	CBI	(G) Open, non-dispersive use	(G) Fatty acids, C16-18 and C18-unsatd., branched and linear, polymers with an epoxy resin, C18-unsatd. fatty acid dimers and triethylenetetramine
P-00-0856	05/30/00	08/28/00	CBI	(G) Open, non-dispersive use	(G) Hydroxy functional amino ester
P-00-0857	05/30/00	08/28/00	CBI	(G) Toner chemical	(G) Polyester resin
P-00-0858	05/31/00	08/29/00	Gaco Western, Inc.	(S) Single component moisture cured elastomeric waterproofing membrane	(S) 1,3-pentanediol, 2,2,4-trimethyl-, polymer with 1,3-diisocyanatomethyl- benzene, a-hydro-omega-hydroxypoly[oxy (methyl-1,2-ethanediyl)] and α,α′,α″-1,2,3-propanetriyltris [omega-hydroxy- poly[oxy(methyl-1,2-ethanediyl)]]*
P-00-0859	05/30/00	08/28/00	CBI	(G) Toner chemical	(G) Polyester resin
P-00-0860	05/31/00	08/29/00	Dow Corning Corporation	(S) Thermoplastic resin additive	(G) Alkylsiloxane-modified polyalkylene resin
P-00-0861	05/31/00	08/29/00	CBI	(G) This substance in combination with other proprietary additives result in a mixture of components which collectively have unique antistatic properties	(G) Trineoalkoxy amino zirconate
P-00-0862	05/31/00	08/29/00	CBI	(G) This substance in combination with other proprietary additives result in a mixture of components which collectively have unique antistatic properties.	(G) Tri neoalkoxy sulfonyl zirconate
P-00-0863	05/31/00	08/29/00	The P. D. George Company	(S) Electrical insulation varnish	(G) Carboxylic acid, polymer with 1,2-ethanediol, 2,5-furandione and alicyclic compound
P-00-0864	05/31/00	08/29/00	CBI	(G) Open, non-dispersive (coating resin)	(G) Urethane acrylate
P-00-0865	06/01/00	08/30/00	Dow Corning Corporation	(S) Anti-misting additive for silicone release coatings	(G) Dimethyl, methylalkyl, methylaryl siloxane
P-00-0866	06/01/00	08/30/00	Dow Corning Corporation	(S) Anti-misting additive for silicone release coatings	(G) Dimethyl, methylalkyl, methylaryl siloxane
P-00-0867	06/01/00	08/30/00	Dow Corning Corporation	(S) Anti-misting additive for silicone release coatings	(G) Dimethyl, methylalkyl, methylaryl siloxane
P-00-0868	06/01/00	08/30/00	CBI	(G) Commercial and consumer contained use in an article	(G) Pyrazolotriazole derivative
P-00-0869	06/01/00	08/30/00	3M Company	(S) Adhesive	(G) Polyurethane
P-00-0870	06/02/00	08/31/00	3M Company	(S) Chemical intermediate	(G) Acrylate terpolymer
P-00-0871	06/02/00	08/31/00	CBI	(G) Process catalyst	(G) Reaction product of halogenated arylammonium salt, alkylaluminum and substituted carbomonocyclic metal compound
P-00-0872	06/02/00	08/31/00	Dyneon LLC	(S) Fluoroelastomer for making molded parts	(G) Fluoroelastomer
P-00-0873	06/02/00	08/31/00	CBI	(G) Component of adhesives, inks, and clear varnishes	(G) Urethane acrylate
P-00-0874	06/02/00	08/31/00	CBI	(G) Component of adhesives, inks, and clear varnishes	(G) Urethane acrylate
P-00-0875	06/05/00	09/03/00	Ashland Inc.	(G) Organic foundry binder	(G) Modified phenol-formaldehyde resin
P-00-0876	06/05/00	09/03/00	Ashland Inc.	(G) Organic foundry binder	(G) Modified phenol-formaldehyde resin
P-00-0877	06/05/00	09/03/00	Ashland Inc.	(G) Organic foundry binder	(G) Modified phenol-formaldehyde resin
P-00-0878	06/05/00	09/03/00	Ashland Inc.	(G) Organic foundry binder	(G) Modified phenol-formaldehyde resin
P-00-0879	06/05/00	09/03/00	Ashland Inc.	(G) Stripper, open non-dispersive use	(G) Amide
P-00-0880	06/05/00	09/03/00	DMC-2, L.P.	(G) Intermediate chemical	(S) 1,2,3 propanetricarboxylic acid, 2-hydroxy-, bismuth(3+) salt (1:1)*
P-00-0881	06/05/00	09/03/00	Gelest, Inc.	(S) Component in resin formulation for coating glass; r+d purposes	(G) Silane ester
P-00-0882	06/05/00	09/03/00	Gelest, Inc.	(S) Intermediate for conversion to final product research purposes	(S) Benzene, bis[(trichlorosilyl) ethyl]-*
P-00-0883	06/04/00	09/02/00	Nagase America Corporation	(G) Paper coating	(G) Reaction products of hydroxybenzoic acid and polyhydroxymethylbutane
P-00-0884	06/06/00	09/04/00	H.B. Fuller Company	(S) Prepolymer for moisture-cure adhesive	(G) Polyester polyether isocyanate polymer
P-00-0885	06/06/00	09/04/00	H.B. Fuller Company	(S) Prepolymer for moisture-cure adhesive	(G) Polyester polyether isocyanate polymer
P-00-0886	06/06/00	09/04/00	H.B. Fuller Company	(S) Moisture-cure adhesive	(G) Polyester polyether isocyanate polymer
P-00-0887	06/06/00	09/04/00	H.B. Fuller Company	(S) Moisture-cure adhesive	(G) Polyester polyether isocyanate polymer
P-00-0888	06/02/00	08/31/00	CBI	(G) Open, non-dispersive use	(G) Hydroxy functional acrylic polymer
P-00-0889	06/05/00	09/03/00	Cognis Corporation	(G) Defoaming agent	(S) Fatty acids, C16-18 and C18-unsatd., triesters with polyethylene-polypropylene glycol ether and glycerol*
P-00-0890	06/06/00	09/04/00	CBI	(G) Resin coating	(G) Cyclohexane, 1.1′methylenebis[4-isocyanato-polymer with 2-propenoic acid, 2-hydroxyethyl ester, 2-propenoic acid, 2-methyl-monoester with 1,2-propanediol, methyl oxirane and alkanol
P-00-0891	06/05/00	09/03/00	CBI	(G) Resin coating	(G) Polyester resin
P-00-0892	06/05/00	09/03/00	CBI	(G) Resin coating	(G) Polyester resin
P-00-0893	06/05/00	09/03/00	CBI	(G) Resin coating	(G) Polyester resin
P-00-0894	06/05/00	09/03/00	H.B. Fuller Company	(S) Film laminating adhesive for packaging and converting. volumes and use pertaining to each substance of pmn seperately.	(G) Polyether polyurethane polymer
P-00-0895	06/05/00	09/03/00	H.B. Fuller Company	(S) Film laminating adhesive for packaging and converting. volumes and use pertaining to each substance of pmn seperately.	(G) Polyether polyurethane polymer
P-00-0896	06/05/00	09/03/00	H.B. Fuller Company	(S) Film laminating adhesive for packaging and converting. volume and use pertaining to each substance of pmn seperately.	(G) Polyether polyurethane polymer
P-00-0897	06/05/00	09/03/00	H.B. Fuller Company	(S) Film laminating adhesive for packaging and converting. volume and use pertaining to each substance of pmn seperately.	(G) Polyether polyurethane polymer
P-00-0898	06/05/00	09/03/00	CBI	(G) Drilling additive	(G) Amine salt
P-00-0899	06/05/00	09/03/00	CBI	(G) Industrial rubber to metal vulcanization bonding primer component for open, non-dispersive use	(G) Urea alkoxy silane
P-00-0900	06/05/00	09/03/00	CBI	(G) This site limited intermediate will be consumed in the manufacture of a multifunctional ingredient to be used in the production of complex gear lubricants, tractor hydraulic fluids, and combustion engine lubricants preparations. this intermediate has no anticipated commercial use as a product in its own right	(G) Polyalkene, sulfonated
P-00-0901	06/05/00	09/03/00	CBI	(G) The notified substance will be used as a promoter in the formation of complex gear oil lubricants, an ingredient in tractor hydraulic oil formulations which have improved frictional and water tolerance properties, and possibly as a detergent additive in formulations for combustion engine lubrication	(G) Polyalkylene sulfonate, salts
P-00-0902	06/06/00	09/04/00	CBI	(S) Curing agent for epoxy resins in adhesives and coating applications	(G) Epoxy polyamine adduct
P-00-0903	06/07/00	09/05/00	CBI	(G) Open, non-dispersive use (polymer)	(G) Hydrogenated nitrile polymer
P-00-0904	06/05/00	09/03/00	Reichhold, Inc.	(G) Hot melt polyurethane adhesive	(G) Hot melt polyurethane adhesive
P-00-0905	06/07/00	09/05/00	CBI	(S) Brightener for electroplating	(G) Synthesis with polyamine and chloro propylene oxide, aliphatic amine polyglycol mixture
P-00-0906	06/07/00	09/05/00	CBI	(S) Component of wire enamels used in electrical industry	(G) Aromatic dicarboxylic acid polymer with 1,3-dihydro-1,3-dioxo-5-isobenzofuran-carboxylic acid and 1,1′-methylenebis[4-isocyanatobenzene]
P-00-0907	06/07/00	09/05/00	CBI	(G) Open, non-dispersive use.	(G) Hydroxy functional acrylic polymer
P-00-0908	06/07/00	09/05/00	Schill + seilacher	(S) Anti-static component of synthetic fiber spinfinishes	(S) Ethanol, 2,2′,2″-nitrilotris-, compd. with a-decyl-omega-hydroxypoly(oxy-1,2-ethanediyl) phosphate*
P-00-0909	06/07/00	09/05/00	Schill + Seilacher	(G) Component of spinfinish in textile fabrication-open non-dispersive use	(S) Poly(oxy-1,2-ethanediyl), a-decyl-omega-hydroxy-, phosphate, ammonium salt*
P-00-0910	06/08/00	09/06/00	CBI	(S) Component of wire enamels used in electrical industry	(G) Cresol-blocked isocyanate
P-00-0911	06/09/00	09/07/00	E. I. Dupont De Nemours & Company, Inc.	(G) Intermediate (closed destructive use)	(G) Perfluorinated organic peroxide
P-00-0912	06/09/00	09/07/00	CBI	(G) Synthetic resin	(G) Epoxy resin containing phosphorus
P-00-0913	06/09/00	09/07/00	CBI	(G) Colorant for non-aqueous formulations	(G) Polyalkoxylated aromatic amine tint
P-00-0914	06/12/00	09/10/00	E. I. Dupont De Nemours & Co.	(G) Polyesterification catalyst	(G) Titanium phosphinate complex
P-00-0915	06/12/00	09/10/00	Cook Composites & Polymers Co.	(S) Polymer base for marine coatings	(G) Acrylic copolymer resin
P-00-0916	06/12/00	09/10/00	CBI	(S) Adhesive to laminate two films together	(G) Toluene diisocyanate terminated polyether polyol
P-00-0917	06/13/00	09/11/00	Ciba Specialty Chemicals Corporation	(G) Textile dye	(G) Glycine, n-[3-(substituted)-4-[[5,6(or 6,7)-dichloro-2-benzothiazolyl]azo]phenyl]-n-ethyl-, ethyl ester
P-00-0918	06/14/00	09/12/00	CBI	(S) Emulsifier for binder for textile dyeing	(G) Bisphenoxypolyalkylideneglycol
P-00-0919	06/14/00	09/12/00	CBI	(S) Curing agent for epoxy resins in adhesive and coatings applications	(G) Epoxy resin adduct of cycloaliphatic amine
P-00-0920	06/14/00	09/12/00	CBI	(S) Textile finishing agent	(G) Methacrylate copolymer salt
P-00-0921	06/15/00	09/13/00	Shin-etsu Silicones of America, Inc.	(S) Ingredient for silicone grease	(G) Silane treated silica
P-00-0922	06/14/00	09/12/00	CBI	(G) Chemical intermediate used in the synthesis of pharmaceuticals	(G) Alkoxy borohydride
P-00-0923	06/14/00	09/12/00	Cytec Industries Inc.	(G) Polyurethane adhesive for bonding plastics, films, or textile materials; polyurethane binder for inks	(G) Polyurea-polyurethane dispersion
P-00-0924	06/15/00	09/13/00	CBI	(S) Drying catalyst used in formulating surface coatings and inks	(G) Strontium carboxylate
P-00-0925	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0926	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0927	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0928	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0929	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0930	06/14/00	09/12/00	CBI	(G) Component of coating with open use	(G) Acrylic copolymer
P-00-0931	06/19/00	09/17/00	Mitsubishi Gas Chemical Company America, Inc.	(S) Epoxy curing agent	(S) Formaldehyde, polymer with 1,3-benzenedimethanamine and 4(1,1-dimethylethyl)phenol*
P-00-0932	06/16/00	09/14/00	Elf Atochem North America, Inc.	(G) Intermediate for commercial peroxide products	(S) Hydroperoxide, 1,1-dimethylethyl, sodium salt*
P-00-0933	06/16/00	09/14/00	Elf Atochem North America, Inc.	(G) Intermediate foe commercial peroxide products	(S) Hydroperoxide, 1,1-dimethylethyl, potassium salt*
P-00-0934	06/16/00	09/14/00	Elf Atochem North America, Inc.	(G) Intermediate foe commercial peroxide products	(S) Hydroperoxide, 1,1-dimethylpropyl, sodium salt*
P-00-0935	06/16/00	09/14/00	Elf Atochem North America, Inc.	(G) Intermediate foe commercial peroxide products	(S) Hydroperoxide, 1,1-dimethylpropyl, potassium salt*
P-00-0936	06/16/00	09/14/00	Palmer International, Inc.	(S) Resin modifier for ink; resin modifier for adhesives; plasticizer for paints and coatings	(G) Phenolic modified polymer or resin
P-00-0937	06/19/00	09/17/00	CBI	(G) Urethane resin for the coatings and adhesive industry	(G) Poly[oxy(methyl-1,2-ethanediyl)], alpha-hydro-omega-hydroxy-, polymer with 1,1′-methylenebis[4-isocyanatocyclohexane], and an aliphatic alcohol
P-00-0938	06/19/00	09/17/00	CBI	(G) Open, non-dispersive (resin)	(G) Blocked polyisocyanate
P-00-0939	06/19/00	09/17/00	CBI	(G) Adhesive for Flexible Substrates	(G) Polyester polyurethane
P-00-0940	06/19/00	09/17/00	Xerox Corp.	(G) Open, non-dispersive use as a constituent in solid, crayon like inks for computer printers	(G) Polyamide resin
P-00-0941	06/19/00	09/17/00	Xerox Corp.	(G) Open, non-dispersive use as a constituent in solid, crayon like inks for computer printers	(G) Aliphatic urethane
P-00-0942	06/19/00	09/17/00	CBI	(G) Lubricant additive, contained use	(G) Alkylated naphthylamine
P-00-0943	06/19/00	09/17/00	CBI	(G) Component of coating with open use	(G) Aqueous polyurethane
P-00-0944	06/19/00	09/17/00	CBI	(G) Component of coating with open use	(G) Aqueous polyurethane
P-00-0945	06/19/00	09/17/00	CBI	(G) Component of coating with open use	(G) Aqueous polyurethane
P-00-0946	06/19/00	09/17/00	CBI	(G) Component of coating with open use	(G) Aqueous polyurethane
P-00-0947	06/19/00	09/17/00	CBI	(G) Component of coating with open use	(G) Aqueous polyurethane
P-00-0948	06/20/00	09/18/00	CBI	(G) Binder for architectural coatings	(G) Coconut fatty acid polyester
P-00-0949	06/20/00	09/18/00	CBI	(G) Ingredient for use in consumer products: highly dispersive use	(G) Alkoxy alkylmercaptan
P-00-0950	06/21/00	09/19/00	Rhodia, Inc./Formerly Albright & Wilson	(S) Adhesion promotor, corrosion inhib. & wetting agent for metal surfaces; adhesion promotor and corrosion inhibitor for paints and coatings; adhesion promotor, coupling agent for minerals and pigments; set retarder for oilfied cements	(S) 2-propenoic acid, polymer with ethenylphosphonic acid*
P-00-0951	06/20/00	09/18/00	CBI	(G) Protective industrial coating	(G) Fatty acid modified polyester
P-00-0952	06/20/00	09/18/00	H.B. Fuller Company	(S) Moisture-curing for profile laminating	(G) Polyester polyurethane prepolymer
P-00-0953	06/20/00	09/18/00	H.B. Fuller Company	(S) Moisture-curing for profile laminating	(G) Polyester polyurethane prepolymer
P-00-0954	06/20/00	09/18/00	H.B. Fuller Company	(S) Moisture-curing for profile laminating	(G) Polyester polyurethane prepolymer
P-00-0955	06/20/00	09/18/00	H.B. Fuller Company	(S) Moisture-curing for profile laminating	(G) Polyester polyurethane prepolymer
P-00-0956	06/20/00	09/18/00	H.B. Fuller company	(S) Film laminating adhesive for packaging and converting.	(G) Polyester polyurethane prepolymer
P-00-0957	06/20/00	09/18/00	H.B. Fuller Company	(S) Film laminating adhesive for packaging and converting.	(G) Polyester polyurethane prepolymer
P-00-0958	06/22/00	09/20/00	CBI	(G) Industrial fillers	(G) 1-propanethiol, 3-(trisubstituted)-,hydrolysis products with dichlorodimethylsilane and silica
P-00-0959	06/22/00	09/20/00	CBI	(G) Industrial fillers	(G) 1-propanethiol, 3-(trisubstituted)-,hydrolysis products with dichlorodimethylsilane and silica
P-00-0960	06/22/00	09/20/00	Xerox Corp.	(G) Open, non-dispersive use as a constituent in solid, crayon like inks for computer printers.	(G) Polyakyleneoxy aliphatic urethane
P-00-0961	06/22/00	09/20/00	CBI	(G) Open, non-dispersive (resin)	(G) Aliphatic polyisocyanate
P-00-0962	06/23/00	09/21/00	H.B. Fuller Company	(S) Moisture-cure laminating adhesive	(G) Polyester polyurethane prepolymer
P-00-0963	06/23/00	09/21/00	H.B. Fuller Company	(S) Moisture-cure laminating adhesive	(G) Polyester polyurethane prepolymer
P-00-0964	06/23/00	09/21/00	H.B. Fuller Company	(S) Moisture-cure laminating adhesive	(G) Polyester polyurethane prepolymer
P-00-0965	06/23/00	09/21/00	H.B. Fuller Company	(S) Moisture-cure laminating adhesive	(G) Polyester polyurethane prepolymer
P-00-0966	06/22/00	09/20/00	Archimica Inc.	(S) Agricultural product intermediate	(G) Haloarylalkylketoester
P-00-0985	06/21/00	09/19/00	CBI	(S) Laminating adhesive	(G) Aliphatic polyether polyurethane

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 50 Notices of Commencement From: 05/22/00 to 06/23/00

Case No.	Received Date	Commencement/Import Date	Chemical
P-00-0015	06/14/00	06/10/00	(G) Polyoxyalkylene polyester urethane block polymer, salt with phosphorylated polyester
P-00-0038	06/12/00	05/22/00	(G) Urethane acrylate
P-00-0199	06/19/00	06/12/00	(S) Siloxanes and silicones, di-me, hydroxy-terminated, polymers with silicic acid*
P-00-0302	06/13/00	05/04/00	(S) Poly(oxy-1,2-ethanediyl),.alpha., .alpha.′, .alpha.″, .alpha.′″-[1,6-hexanediylbis[(methylnitrilio)di-2,1-ethanediyl)] tetrakis [.omega.-hydroxy-, bis(methyl sulfate) (salt)*
P-00-0317	05/22/00	05/02/00	(G) Amino-functional siloxane
P-00-0333	05/25/00	04/28/00	(G) Salt of an acrylate copolymer
P-00-0344	06/12/00	05/11/00	(G) Mixed polyol-glycerol fatty aid ester
P-00-0354	06/23/00	06/02/00	(G) Polyester-polyvinyl modified mdi-based polyurethane
P-00-0359	05/23/00	04/15/00	(G) Alkylnaphthalenesulfonic acid
P-00-0362	06/13/00	05/15/00	(G) 1,1′-methylenebis[isocyanatobenzene], polymer with polyether polyols, a polyester polyol, and a modified polyvinyl copolymer
P-00-0410	06/14/00	05/03/00	(G) Calcium fatty acid complex.
P-00-0431	05/25/00	05/15/00	(G) Substituted alicyclic alkenyl benz[e]indolium salt
P-00-0435	05/24/00	05/09/00	(G) Aminoalkyl polydimethylsiloxane
P-00-0463	06/12/00	05/17/00	(G) Metal salt
P-00-0493	06/19/00	05/26/00	(G) Hydroxy-functional solution acrylic
P-00-0512	06/08/00	05/22/00	(G) Mixed ammonium/sodium salt of naphthalene azo dyestuff
P-00-0541	06/19/00	05/28/00	(G) Chloro nitro phenyl ether
P-00-0583	06/15/00	06/13/00	(S) 1-butanaminium, n,n,n-tributyl-, hexafluorophosphate(1-)*
P-94-0339	06/12/00	05/30/00	(S) Isopropylmagnesium bromide*
P-94-0899	06/09/00	06/01/00	(S) 2-decyltetradecanoic acid*
P-95-0169	06/21/00	06/03/00	(S) Morpholine, 4-(1-oxo-2-propenyl)-*
P-95-1050	05/26/00	01/04/00	(G) Modified cationic acrylamide polymer
P-95-1072	05/26/00	03/24/00	(G) A magnesium, titanium organo-complex compound
P-95-1215	06/15/00	05/19/00	(G) Polyester urethane polymer
P-96-0192	05/30/00	04/26/00	(G) Dihydropyrrol-2-ylidene derivative
P-96-1406	06/05/00	11/19/99	(G) Aminoalkyl-functional alkoxysilane
P-96-1494	06/08/00	05/11/00	(G) Silyl phoshonate
P-96-1495	06/08/00	05/11/00	(G) Silyl phoshonate
P-97-0116	06/13/00	03/05/97	(G) Phthalate-containing polyester polymer
P-98-0040	05/23/00	02/25/00	(S) Residues (petroleum), polycyclic arom, hydrocarbon-rich catalytic cracking, polymers with formaldehyde and phenol*
P-98-0082	06/19/00	06/01/00	(G) Reactive acrylate
P-98-0083	06/19/00	05/27/00	(G) Reactive acrylate
P-98-0084	06/19/00	06/02/00	(G) Reactive acrylate
P-98-0257	06/12/00	05/24/00	(G) Sodium poly (hydroxyalkyl carboxyalkyl acrylamido sulphate)
P-98-0398	05/25/00	05/09/00	(G) Substituted benzophenone
P-98-0646	05/26/00	05/11/00	(S) Benzene, ethenyl-, polymer with ethene and 1-propene
P-98-0916	06/12/00	05/23/00	(S) Poly(oxy-1,2-ethanediyl), alpha-(phenylmethyl)-omega-hydroxy-*
P-99-0425	06/19/00	05/18/00	(G) Polymer of an alkyl phosphate ester, phosphorus pentoxide and an alkyl oxide
P-99-0480	06/09/00	05/23/00	(G) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 1,3-bis (1-isocyanato-1-methylethyl) benzene, diamine, a-hydro-omega-hydroxypoly (oxy-1,4-butanediyl) and 2-methyl-1,3-propanediol, ammonium salt, polyethylene-polypropylene glycol 2-aminopropyl me ether blocked*
P-99-0543	06/19/00	06/09/00	(G) Alkali salt of polyalkylene glycol
P-99-0680	06/22/00	05/25/00	(S) 1,3-isobenzofurandione, polymer with (chloromethyl)oxirane and 4,4′-(1-methylethylidene)bis[phenol], ester with 2-oxepanone homopolymer 2-[(1-oxo-2-propenyl)oxy)ethyl ester*
P-99-0853	05/23/00	05/16/00	(G) Polyester
P-99-0875	05/25/00	10/19/99	(G) Methylenebis[isocyanatobenzene], polymer with alkanepolyols, dimethyl terephthalate, benzenepolycarboxylic acid and alkanepolycarboxylic acids
P-99-1060	06/15/00	05/29/00	(G) Polyoxyalkylene ether
P-99-1202	06/05/00	05/02/00	(G) Sulfonyl azide intermediate
P-99-1226	05/30/00	05/14/00	(G) Substituted benzoyl chloride
P-99-1321	05/22/00	05/02/00	(G) Vegetable oil, chlorosulfurized
P-99-1329	05/22/00	05/02/00	(G) Vegetable oil, sulfurized
P-99-1335	06/12/00	06/01/00	(G) Blocked isocyanate
P-99-1373	06/09/00	06/06/00	(S) 2-butendioic acid, (2 z)-, mono[2- [(2-methyl-1-oxo-2 propenyl)oxy]ethyl]ester*

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: July 27, 2000.

Deborah A. Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.