2022-18114. Airworthiness Directives; Airbus SAS Airplanes

AGENCY:

Federal Aviation Administration (FAA), Department of Transportation (DOT).

ACTION:

Final rule.

SUMMARY:

The FAA is superseding Airworthiness Directive (AD) 2016-26-05 and AD 2019-21-02, which applied to certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes. AD 2016-26-05 and AD 2019-21-02 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary, and that new airplanes have been added to the applicability. This AD continues to require the actions in AD 2019-21-02, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective September 27, 2022.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of September 27, 2022.

The Director of the Federal Register approved the incorporation by reference of certain other publications listed in this AD as of November 29, 2019 (84 FR 57313, October 25, 2019).

ADDRESSES:

For EASA material incorporated by reference (IBR) in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; internet www.easa.europa.eu. You may find this IBR material on the EASA website at ad.easa.europa.eu. For Airbus service information identified in this final rule, contact Airbus SAS, Airworthiness Office-EAL, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone [phone]; fax [phone]; email [e-mail]; internet www.airbus.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket at www.regulations.gov by searching for and locating Docket No. FAA-2022-0586.

Examining the AD Docket

You may examine the AD docket at www.regulations.gov by searching for and locating Docket No. FAA-2022-0586; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT:

Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone [phone]; email [e-mail].

SUPPLEMENTARY INFORMATION:

Background

EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021-0248, dated November 15, 2021 (EASA AD 2021-0248) (also referred to as the MCAI), to correct an unsafe condition for all Airbus SAS Model Airbus A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841, and A330-941 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2016-26-05, Amendment 39 18763 (82 FR 1170, January 5, 2017) (AD 2019-21-02) and AD 2019-21-02, Amendment 39-19768 (84 FR 57313, October 25, 2019) (AD 2019-21-02). AD 2019-21-02 applied to certain Airbus SAS Model A330-200, A330-200 Freighter, and A330-300 series airplanes, and specifies that accomplishing the revision required by that AD terminates all requirements of AD 2016-26-05. The NPRM published in the Federal Register on May 20, 2022 (87 FR 30840). The NPRM was prompted by a determination that new or more restrictive airworthiness limitations are necessary, and that new airplanes have been added to the applicability. The NPRM proposed to continue to require the actions in AD 2019-21-02 and require revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in EASA AD 2021-0248.

The FAA is issuing this AD to address a safety-significant latent failure (that is not annunciated) that, in combination with one or more other specific failures or events, could result in a hazardous or catastrophic failure condition. See the MCAI for additional background information.

Discussion of Final Airworthiness Directive

Comments

The FAA received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator. Accordingly, the FAA is issuing this AD to address the unsafe condition on these products.

Related Service Information Under 1 CFR Part 51

EASA AD 2021-0248 describes new or more restrictive airworthiness limitations for airplane structures and safe life limits, and adds new models to the applicability.

This AD also requires Airbus A330 Airworthiness Limitations Section (ALS) Part 3-Certification Maintenance Requirements (CMR), Revision 06, dated October 15, 2018; and Airbus A330 ALS Part 3-Certification Maintenance Requirements (CMR), Variation 6.1, dated June 28, 2019; which the Director of the Federal Register approved for incorporation by reference as of November 29, 2019 (84 FR 57313, October 25, 2019).

This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

The FAA estimates that this AD affects 138 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

The FAA estimates the total cost per operator for the retained actions from AD 2019-21-02 to be $7,650 (90 work-hours × $85 per work-hour).

The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate.

The FAA estimates the total cost per operator for the new actions to be $7,650 (90 work-hours × $85 per work-hour).

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by:

a. Removing Airworthiness Directive 2016-26-05, Amendment 39-18763 ( 82 FR 1170, January 5, 2017); and Airworthiness Directive 2019-21-02, Amendment 39-19768 (84 FR 57313, October 25, 2019); and

b. Adding the following new airworthiness directive:

2022-16-07 Airbus SAS: Amendment 39-22136; Docket No. FAA-2022-0586; Project Identifier MCAI-2021-01262-T.

(a) Effective Date

This airworthiness directive (AD) is effective September 27, 2022.

(b) Affected ADs

This AD replaces AD 2016-26-05, Amendment 39-18763 (82 FR 1170, January 5, 2017) (AD 2016-26-05); and AD 2019-21-02, Amendment 39-19768 (84 FR 57313, October 25, 2019) (AD 2019-21-02).

(c) Applicability

This AD applies to Airbus SAS Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, -343, -841, and -941 airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before July 1, 2021.

(d) Subject

Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.

(e) Unsafe Condition

This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary, and that new airplanes have been added to the applicability. The FAA is issuing this AD to address a safety-significant latent failure (that is not annunciated) that, in combination with one or more other specific failures or events, could result in a hazardous or catastrophic failure condition.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Retained Revision of the Existing Maintenance or Inspection Program, With No Changes

This paragraph restates the requirements of paragraph (g) of AD 2019-21-02, with no changes. For Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before October 15, 2018: Within 90 days after November 29, 2019 (the effective date of AD 2019-21-02), revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 3—Certification Maintenance Requirements (CMR), Revision 06, dated October 15, 2018, as supplemented by Airbus A330 ALS Part 3—Certification Maintenance Requirements (CMR), Variation 6.1, dated June 28, 2019. The initial compliance times for doing the tasks is at the time specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 3—Certification Maintenance Requirements (CMR), Revision 06, dated October 15, 2018, as supplemented by Airbus A330 ALS Part 3—Certification Maintenance Requirements (CMR), Variation 6.1, dated June 28, 2019, or within 90 days after November 29, 2019, whichever occurs later. Accomplishing the revision of the existing maintenance or inspection program required by paragraph (i) of this AD terminates the requirements of this paragraph.

(h) Retained No Alternative Actions or Intervals, With a New Exception

This paragraph restates the requirements of paragraph (h) of AD 2019-21-02, with a new exception. Except as required by paragraph (i) of this AD, after the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions ( e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (l)(1) of this AD.

(i) New Revision of the Existing Maintenance or Inspection Program

Except as specified in paragraph (j) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2021-0248, dated November 15, 2021 (EASA AD 2021-0248). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.

(j) Exceptions to EASA AD 2021-0248

(1) Where EASA AD 2021-0248 refers to its effective date, this AD requires using the effective date of this AD.

(2) The requirements specified in paragraphs (1) and (2) of EASA AD 2021-0248 do not apply to this AD.

(3) Paragraph (3) of EASA AD 2021-0248 specifies revising “the approved AMP [aircraft maintenance program]” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.

(4) The initial compliance time for doing the tasks specified in paragraph (3) of EASA 2021-0248 is at the applicable “associated thresholds,” as incorporated by the requirements of paragraph (3) of EASA AD 2021-0248, or within 90 days after the effective date of this AD, whichever occurs later.

(5) The provisions specified in paragraphs (4) and (5) of EASA AD 2021-0248 do not apply to this AD.

(6) The “Remarks” section of EASA AD 2021-0248 does not apply to this AD.

(k) New Provisions for Alternative Actions and Intervals

After the existing maintenance or inspection program has been revised as required by paragraph (i) of this AD, no alternative actions ( e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2021-0248.

(l) Additional AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph (m) of this AD. Information may be emailed to: [e-mail].

(i) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(ii) AMOCs approved previously for AD 2019-21-02 are approved as AMOCs for the corresponding provisions of EASA AD 2021-0248 that are required by paragraph (g) of this AD.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(m) Related Information

For more information about this AD, contact Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone [phone]; email [e-mail].

(n) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(3) The following service information was approved for IBR on September 27, 2022.

(i) European Union Aviation Safety Agency (EASA) AD 2021-0248, dated November 15, 2021.

(ii) [Reserved]

(4) The following service information was approved for IBR on November 29, 2019 (84 FR 57313, October 25, 2019).

(i) Airbus A330 Airworthiness Limitations Section (ALS) Part 3—Certification Maintenance Requirements (CMR), Revision 06, dated October 15, 2018.

(ii) Airbus A330 ALS Part 3—Certification Maintenance Requirements (CMR), Variation 6.1, dated June 28, 2019.

(5) For EASA AD 2021-0248, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at ad.easa.europa.eu.

(6) For Airbus service information identified in this AD, contact Airbus SAS, Airworthiness Office-EAL, Rond-Point Emile Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone [phone]; fax [phone]; email [e-mail]; internet www.airbus.com.

(7) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(8) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [e-mail], or go to: www.archives.gov/​federal-register/​cfr/​ibr-locations.html.

Issued on July 29, 2022.

Christina Underwood,

Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service.