[Federal Register Volume 63, Number 163 (Monday, August 24, 1998)]
[Notices]
[Pages 45107-45108]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-22641]
[[Page 45107]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-98-4335]
Notice of Receipt of Petition for Decision That Nonconforming
1993 Chrysler Town and Country Multi-Purpose Passenger Vehicles Are
Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1993 Chrysler Town and Country multi-purpose passenger vehicles (MPVs)
are eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that 1993
Chrysler Town and Country MPVs that were not originally manufactured to
comply with all applicable Federal motor vehicle safety standards are
eligible for importation into the United States because (1) they are
substantially similar to vehicles that were originally manufactured for
sale in the United States and that were certified by their manufacturer
as complying with the safety standards, and (2) they are capable of
being readily altered to conform to the standards.
DATE: The closing date for comments on the petition is September 23,
1998.
ADDRESS: Comments should refer to the docket number and notice number,
and be submitted to: Docket Management, Room PL-401, 400 Seventh St.,
SW, Washington, DC 20590. [Docket hours are from 10 am to 5 pm]
FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle
Safety Compliance, NHTSA (202-366-5306).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable Federal motor
vehicle safety standards shall be refused admission into the United
States unless NHTSA has decided that the motor vehicle is substantially
similar to a motor vehicle originally manufactured for importation into
and sale in the United States, certified under 49 U.S.C. 30115, and of
the same model year as the model of the motor vehicle to be compared,
and is capable of being readily altered to conform to all applicable
Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
Atlantic ICI, Inc. of Apopka, Florida (``Atlantic'') (Registered
Importer 96-096) has petitioned NHTSA to decide whether 1993 Chrysler
Town and Country MPVs are eligible for importation into the United
States. The vehicles which Atlantic believes are substantially similar
are 1993 Chrysler Town and Country MPVs that were manufactured for sale
in the United States and certified by their manufacturer, Chrysler
Corporation, as conforming to all applicable Federal motor vehicle
safety standards.
The petitioner claims that it carefully compared non-U.S. certified
1993 Chrysler Town and Country MPVs to their U.S. certified
counterparts, and found the two vehicles to be substantially similar
with respect to compliance with most Federal motor vehicle safety
standards.
Atlantic submitted information with its petition intended to
demonstrate that non-U.S. certified 1993 Chrysler Town and Country
MPVs, as originally manufactured, conform to many Federal motor vehicle
safety standards in the same manner as their U.S. certified
counterparts, or are capable of being readily altered to conform to
those standards.
Specifically, the petitioner claims that non-U.S. certified 1993
Chrysler Town and Country MPVs are identical to their U.S. certified
counterparts with respect to compliance with Standard Nos. 102
Transmission Shift Lever Sequence, 103 Defrosting and Defogging
Systems, 104 Windshield Wiping and Washing Systems, 105 Hydraulic Brake
Systems, 106 Brake Hoses, 113 Hood Latch Systems, 114 Theft Protection,
116 Brake Fluid, 119 New Pneumatic Tires for Motor Vehicles other than
Passenger Cars, 124 Accelerator Control Systems, 201 Occupant
Protection in Interior Impact, 202 Head Restraints, 203 Impact
Protection for the Driver from the Steering Control System, 204
Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door
Locks and Door Retention Components: 207 Seating Systems, 208 Occupant
Crash Protection, 209 Seat Belt Assemblies, 210 Seat Belt Assembly
Anchorages, 212 Windshield Retention, 214 Side Impact Protection, 216
Roof Crush Resistance, 219 Windshield Zone Intrusion, 301 Fuel System
Integrity, and 302 Flammability of Interior Materials.
Additionally, the petitioner states that non-U.S. certified 1993
Chrysler Town and Country MPVs comply with the Bumper Standard found in
49 CFR Part 581 and with the Theft Prevention Standard found in 49 CFR
Part 541.
Petitioner also contends that the vehicles are capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) substitution of a lens
marked ``Brake'' for a lens with a noncomplying symbol on the brake
failure indicator lamp; (b) recalibration of the speedometer/odometer
from kilometers to miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: (a) installation of U.S.-model headlamp assemblies that
incorporate sealed beam headlamps; (b) installation of U.S.-model front
and rear sidemarker/reflector assemblies; (c) installation of U.S.-
model taillamp assemblies.
Standard No. 111 Rearview Mirror: replacement of the passenger side
rearview mirror with a U.S.-model component.
Standard No. 118 Power Window Systems: rewiring of the power window
system so that the window transport is inoperative when the ignition is
switched off.
Standard No. 120 Tire Selection and Rims for Motor Vehicles other
than Passenger Cars: installation of a tire information placard.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Section, National Highway Traffic Safety
Administration, Room 5109, 400 Seventh Street, S.W., Washington, DC
20590. It is requested but not required that 10 copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action on the petition
will be published in the Federal Register pursuant to the authority
indicated below.
[[Page 45108]]
Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued: August 18, 1998.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 98-22641 Filed 8-21-98; 8:45 am]
BILLING CODE 4910-59-P
