95-21460. Steel Erection Negotiated Rulemaking Advisory Committee

[Federal Register Volume 60, Number 168 (Wednesday, August 30, 1995)]
[Proposed Rules]
[Pages 45111-45112]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-21460]



=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

29 CFR Part 1926


Steel Erection Negotiated Rulemaking Advisory Committee

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice of Committee meeting.

-----------------------------------------------------------------------

SUMMARY: Under the provisions of the Federal Advisory Committee Act 
(FACA), notice is hereby given of a meeting of the Steel Erection 
Negotiated Rulemaking Advisory Committee (SENRAC). Notice is also given 
of the location of the meeting. This meeting will be open to the 
public.

DATES: The meeting is scheduled for September 19-21, 1995. The meeting 
will begin at 10:00 a.m. on September 19th.

ADDRESSES: U.S. Department of Labor, DOL Academy, Room C-5321, Seminar 
Room 4, 200 Constitution Avenue, N.W. Washington, D.C. 20210.

FOR FURTHER INFORMATION CONTACT: Anne Cyr, Acting Director, Office of 
Information and Consumer Affairs, OSHA, U.S. Department of Labor, Room 
N-3647, 200 Constitution Avenue, N.W., Washington, D.C. 20210; 
telephone [phone].

SUPPLEMENTARY INFORMATION: On May 11, 1994, OSHA announced that it had 
established the Steel Erection Negotiated Rulemaking Advisory Committee 
(SENRAC) (59 FR 24389) in accordance with the Federal Advisory 
Committee Act (FACA), the Negotiated Rulemaking Act of 1990 (NRA) and 
section 7(b) of the Occupational Safety and Health Act (OSH Act) to 
resolve issues associated with the development of a Notice of Proposed 
Rulemaking on Steel Erection. Appointees to the Committee include 
representatives from labor, industry, public interests and government 
agencies.
    SENRAC began negotiations in mid-June, 1994, and has met nine times 
since. Initial meetings dealt with procedural matters, including 
schedules, agendas and the establishment of workgroups. The Committee 
established workgroups to address issues on Fall Protection, 
Construction Specifications and Scope. During subsequent meetings, 
foundations for negotiations were established and additional workgroups 
were formed to address more specific issues and develop a draft 
revision of subpart R.
    The Committee last met on June 27-29 where consensus was expected 
to be reached on a proposed revision of subpart R. The Committee did 
reach agreement on major issues and most of the elements of the draft 
revision; however, after much deliberation, they could not come to an 
agreement on fall protection. OSHA determined that since the Committee 
made significant progress on the fall protection issue and agreed to 
other very important improvements to the existing standard, it would 
allow the Committee to convene a workgroup to resolve the fall 
protection issue. On July 26, a workgroup met in Philadelphia and 
tentatively agreed on fall protection requirements for steel erection. 
This recommendation will be presented to the full SENRAC Committee at 
the September meeting where it is expected that consensus will be 
reached on the complete draft proposal. OSHA will then complete the 
preamble and prepare the document in the proper Federal Register format 
for publication as a proposed rule.
    All interested parties are invited to attend the Committee meetings 
at the time and place indicated above. No advanced registration is 
required. Seating will be available to the public on a first-come-
first-served basis. Persons with disabilities, who need special 
accomodations, should contact the Facilitator by September 12, 1995. 
During the meeting, members of the general public may informally 
request permission to address the Committee.
    Minutes of the meetings and materials prepared for the Committee 
will be available for public inspection at the OSHA Docket Office, N-
2625, 200 Constitution Ave., N.W., Washington, D.C. 20210; telephone 
[phone]. Copies of these materials may be obtained by sending a 
written request to the Facilitator.
    The Facilitator, Philip J. Harter, can be reached at Suite 404, 
2301 M Street, N.W., Washington, D.C. 20037; telephone [phone], 
FAX [phone].
    For an electronic copy of this Federal Register notice, contact the 
Labor News Bulletin Board, [phone] (callers must pay any toll-
call charges. 300, 1200, 2400, 9600 or 14,400 BAUD; Parity: None; Data 
Bits = 8; Stop Bit = 1. Voice phone [phone]); or OSHA's Webpage 
on Internet at http://

[[Page 45112]]
www.osha.gov/ and http://www.osha-slc.gov/. For news releases, fact 
sheets, and other documents, contact OSHA FAX at [phone] at 
$1.50 per minute.

    Authority: This document was prepared under the direction of 
Joseph A. Dear, Assistant Secretary of Labor for Occupational Safety 
and Health, U.S. Department of Labor, 200 Constitution Avenue, N.W., 
Washington, D.C. 20210, pursuant to section 3 of the Negotiated 
Rulemaking Act of 1990, 104 Stat. 4969, Title 5 U.S.C. 561 et seq.; 
and Section 7(b) of the Occupational Safety and Health Act of 1970, 
84 Stat. 1597, Title 29 U.S.C. 656.

    Signed at Washington, D.C., this 24th day of August, 1995.
Joseph A. Dear,
Assistant Secretary of Labor.
[FR Doc. 95-21460 Filed 8-29-95; 8:45 am]
BILLING CODE 4510-26-P