97-20362. Approval and Promulgation of State Implementation Plans; California State Implementation Plan Revision, Bay Area Air Quality Management District  

  • [Federal Register Volume 62, Number 149 (Monday, August 4, 1997)]
    [Proposed Rules]
    [Pages 41905-41906]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 97-20362]
    
    
    -----------------------------------------------------------------------
    
    ENVIRONMENTAL PROTECTION AGENCY
    
    40 CFR Part 52
    
    [CA 179-0045b; FRL-5863-5]
    
    
    Approval and Promulgation of State Implementation Plans; 
    California State Implementation Plan Revision, Bay Area Air Quality 
    Management District
    
    AGENCY: Environmental Protection Agency (EPA).
    
    ACTION: Proposed rule.
    
    -----------------------------------------------------------------------
    
    SUMMARY: EPA is proposing to approve revisions to the California State 
    Implementation Plan (SIP). This action is an administrative change 
    which revises the definition of volatile organic compounds (VOC) and 
    updates the Exempt Compound list in rules from the Bay Area Air Quality 
    Management District (BAAQMD).
        The intended effect of proposing approval of this action is to 
    incorporate
    
    [[Page 41906]]
    
    changes to the definition of VOC and to update the Exempt Compound list 
    in BAAQMD rules to be consistent with the revised federal and state VOC 
    definitions. EPA is proposing approval of these revisions to be 
    incorporated into the California SIP for the attainment of the national 
    ambient air quality standards (NAAQS) for ozone under title I of the 
    Clean Air Act (CAA or the Act). In the Final Rules Section of this 
    Federal Register, the EPA is approving the state's SIP revisions as a 
    direct final rule without prior proposal because the Agency views these 
    administrative changes as noncontroversial revision amendments and 
    anticipates no adverse comments. A detailed rationale for this approval 
    is set forth in the direct final rule. If no adverse comments are 
    received in response to this proposed rule, no further activity is 
    contemplated in relation to this rule. If EPA receives adverse 
    comments, the direct final rule will be withdrawn and all public 
    comments received will be addressed in a subsequent final rule based on 
    this proposed rule. The EPA will not institute a second comment period 
    on this document. Any parties interested in commenting on this action 
    should do so at this time.
    
    DATES: Comments on this proposed rule must be received in writing by 
    September 3, 1997.
    
    ADDRESSES: Written comments on this action should be addressed to: 
    Christine Vineyard, Rulemaking Office [Air-4], Air Division, U.S. 
    Environmental Protection Agency, Region 9, 75 Hawthorne Street, San 
    Francisco, CA 94105-3901.
        Copies of the rules and EPA's evaluation report of the rules are 
    available for public inspection at EPA's Region 9 office during normal 
    business hours. Copies of the submitted rules are also available for 
    inspection at the following locations:
    
    California Air Resources Board, Stationary Source Division, Rule 
    Evaluation Section, 2020 ``L'' Street, Sacramento, CA 95814.
    Bay Area Air Quality Management District, 939 Ellis Street, San 
    Francisco, CA 94109.
    
    FOR FURTHER INFORMATION CONTACT: Christine Vineyard, Rulemaking Office 
    [Air-4], Air Division, U.S. Environmental Protection Agency, Region 9, 
    75 Hawthorne Street, San Francisco, CA 94105-3901, Telephone (415) 744-
    1197.
    
    SUPPLEMENTARY INFORMATION:
        This document concerns BAAQMD Rule 8-4, General Solvent and Surface 
    Coating Operations; Rule 8-11, Metal Container, Closure and Coil 
    Coating; Rule 8-12, Paper, Fabric, and Film Coating; Rule 8-13, Light 
    and Medium Duty Motor Vehicle Assembly Plants; Rule 8-14, Surface 
    Coating of Large Appliance and Metal Furniture; Rule 8-19, Surface 
    Coating of Miscellaneous Metal Parts and Products; Rule 8-20, Graphic 
    Arts Printing and Coating; Rule 8-23, Coating of Flat Wood Paneling and 
    Wood Flat Stock; Rule 8-29, Aerospace Assembly and Component Coating 
    Operations; 8-31, Surface Coating of Plastic Parts and Products; Rule 
    8-32, Wood Products; Rule 8-38, Flexible and Rigid Disc Manufacturing; 
    Rule 8-43, Surface Coating of Marine Vessels; Rule 8-45, Motor Vehicle 
    and Mobile Equipment Coating Operations; and 8-50, Polyester Resin 
    Operations. These rules were submitted to EPA on October 18, 1996 by 
    the California Air Resources Board. For further information, please see 
    the information provided in the Direct Final action which is located in 
    the Rules Section of this Federal Register.
    
        Authority: 42 U.S.C. 7401-7671q.
    
        Dated: July 10, 1997.
    Felicia Marcus,
    Regional Administrator.
    [FR Doc. 97-20362 Filed 8-1-97; 8:45 am]
    BILLING CODE 6560-50-P
    
    
    

Document Information

Published:
08/04/1997
Department:
Environmental Protection Agency
Entry Type:
Proposed Rule
Action:
Proposed rule.
Document Number:
97-20362
Dates:
Comments on this proposed rule must be received in writing by September 3, 1997.
Pages:
41905-41906 (2 pages)
Docket Numbers:
CA 179-0045b, FRL-5863-5
PDF File:
97-20362.pdf
CFR: (1)
40 CFR 52