2020-17067. Seamless Refined Copper Pipe and Tube From the Socialist Republic of Vietnam: Initiation of Less-Than-Fair-Value Investigation  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    DATES:

    Applicable July 20, 2020.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Ariela Garvett or Maisha Cryor; AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-3609 or (202) 482-5831, respectively.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    The Petition

    On June 30, 2020, the Department of Commerce (Commerce) received an antidumping duty (AD) petition concerning imports of seamless refined copper pipe and tube (copper pipe and tube) from the Socialist Republic of Vietnam (Vietnam) filed in proper form on behalf of the petitioners,[1] domestic producers of copper pipe and tube.[2]

    On July 6, 2020, Commerce requested supplemental information pertaining to certain aspects of the Petition in a supplemental questionnaire.[3] On July 9, 2020, the petitioners filed a response to the supplemental questionnaire.[4]

    In accordance with section 732(b) of the Tariff Act of 1930, as amended (the Act), the petitioners allege that imports of copper pipe and tube from Vietnam are being, or are likely to be, sold in the United States at less than fair value (LTFV) within the meaning of section 731 of the Act, and that imports of such products are materially injuring, or threatening material injury to, the domestic copper pipe and tube industry in the United States. Consistent with section 732(b)(1) of the Act, the Petition is accompanied by information reasonably available to the petitioners supporting the allegation.

    Commerce finds that the petitioners filed the Petition on behalf of the domestic industry, because the petitioners are interested parties, as defined in sections 771(9)(C) and (E) of the Act. Commerce also finds that the petitioners demonstrated sufficient industry support for the initiation of the requested investigation.[5]

    Period of Investigation

    Because Vietnam is a non-market economy (NME) country, pursuant to 19 CFR 351.204(b)(1), the period of investigation for the investigation is October 1, 2019 through March 31, 2020.

    Scope of the Investigation

    The products covered by this investigation are copper pipe and tube from Vietnam. For a full description of the scope of this investigation, see the appendix to this notice.

    Comments on the Scope of the Investigation

    On July 6, 2020, Commerce requested further information from the petitioners regarding the proposed scope to ensure that the scope language in the Petition is an accurate reflection of the products for which the domestic industry is seeking relief.[6] On July 9, 2020, the petitioners revised the scope.[7] The description of the merchandise covered by this investigation, as described in the appendix to this notice, reflects these clarifications.

    As discussed in the Preamble to Commerce's regulations, we are setting aside a period for interested parties to raise issues regarding product coverage (i.e., scope).[8] Commerce will consider all comments received from interested parties and, if necessary, will consult with interested parties prior to the issuance of the preliminary determination. If scope comments include factual information, all such factual information should be limited to public information.[9] To facilitate preparation of its questionnaires, Commerce requests that all interested parties submit such comments by 5:00 p.m. Eastern Time (ET) on August 10, 2020, which is the next business day after 20 calendar days from the signature date of this notice.[10] Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on August 20, 2020, which is ten calendar days from the initial comment deadline.[11]

    Commerce requests that any factual information parties consider relevant to the scope of the investigation be submitted during this period. However, if a party subsequently finds that Start Printed Page 47182additional factual information pertaining to the scope of the investigation may be relevant, the party may contact Commerce and request permission to submit the additional information. All such submissions must be filed on the record of the investigation.

    Filing Requirements

    All submissions to Commerce must be filed electronically via Enforcement and Compliance's (E&C's) Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS), unless an exception applies.[12] An electronically filed document must be received successfully in its entirety by the time and date it is due.

    Comments on Product Characteristics

    Commerce is providing interested parties an opportunity to comment on the appropriate physical characteristics of copper pipe and tube to be reported in response to Commerce's AD questionnaire. This information will be used to identify the key physical characteristics of the subject merchandise in order to report the relevant costs of production accurately, as well as to develop appropriate product-comparison criteria.

    Interested parties may provide any information or comments that they feel are relevant to the development of an accurate list of physical characteristics. In order to consider the suggestions of interested parties in developing and issuing the AD questionnaires, all product characteristics comments must be filed by 5:00 p.m. ET on August 10, 2020, which is the next business day after 20 calendar days from the signature date of this notice.[13] Any rebuttal comments must be filed by 5:00 p.m. ET on August 20, 2020. All comments and submissions to Commerce must be filed electronically using ACCESS, as explained above, on the record of the investigation.

    Determination of Industry Support for the Petition

    Section 732(b)(1) of the Act requires that a petition be filed on behalf of the domestic industry. Section 732(c)(4)(A) of the Act provides that a petition meets this requirement if the domestic producers or workers who support the petition account for: (i) At least 25 percent of the total production of the domestic like product; and (ii) more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the petition. Moreover, section 732(c)(4)(D) of the Act provides that, if the petition does not establish support of domestic producers or workers accounting for more than 50 percent of the total production of the domestic like product, Commerce shall: (i) Poll the industry or rely on other information in order to determine if there is support for the petition, as required by subparagraph (A); or (ii) determine industry support using a statistically valid sampling method to poll the “industry.”

    Section 771(4)(A) of the Act defines the “industry” as the producers as a whole of a domestic like product. Thus, to determine whether a petition has the requisite industry support, the statute directs Commerce to look to producers and workers who produce the domestic like product. The International Trade Commission (ITC), which is responsible for determining whether “the domestic industry” has been injured, must also determine what constitutes a domestic like product in order to define the industry. While both Commerce and the ITC must apply the same statutory definition regarding the domestic like product,[14] they do so for different purposes and pursuant to a separate and distinct authority. In addition, Commerce's determination is subject to limitations of time and information. Although this may result in different definitions of the like product, such differences do not render the decision of either agency contrary to law.[15]

    Section 771(10) of the Act defines the domestic like product as “a product which is like, or in the absence of like, most similar in characteristics and uses with, the article subject to an investigation under this title.” Thus, the reference point from which the domestic like product analysis begins is “the article subject to an investigation” (i.e., the class or kind of merchandise to be investigated, which normally will be the scope as defined in the petition).

    With regard to the domestic like product, the petitioners do not offer a definition of the domestic like product distinct from the scope of the investigation.[16] Based on our analysis of the information submitted on the record, we have determined that copper pipe and tube, as defined in the scope, constitutes a single domestic like product, and we have analyzed industry support in terms of that domestic like product.[17]

    In determining whether the petitioners have standing under section 732(c)(4)(A) of the Act, we considered the industry support data contained in the Petition with reference to the domestic like product as defined in the “Scope of the Investigation,” in the Appendix to this notice. To establish industry support, the petitioners provided the 2019 production of the producers who support the Petition and compared this to the estimated production of the entire U.S. copper pipe and tube industry.[18] We relied on data provided by the petitioners for purposes of measuring industry support.[19]

    Our review of the data provided in the Petition, the Petition Supplement, and other information readily available to Commerce indicates that the petitioners have established industry support for the Petition.[20] First, the Petition established support from domestic producers (or workers) accounting for more than 50 percent of the total production of the domestic like product and, as such, Commerce is not required to take further action in order to evaluate industry support (e.g., polling).[21] Second, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(i) of the Act because the domestic producers (or workers) who support the Petition account for at least 25 percent of the Start Printed Page 47183total production of the domestic like product.[22] Finally, the domestic producers (or workers) have met the statutory criteria for industry support under section 732(c)(4)(A)(ii) of the Act because the domestic producers (or workers) who support the Petition account for more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the Petition.[23] Accordingly, Commerce determines that the Petition was filed on behalf of the domestic industry within the meaning of section 732(b)(1) of the Act.[24]

    Allegations and Evidence of Material Injury and Causation

    The petitioners allege that the U.S. industry producing the domestic like product is being materially injured, or is threatened with material injury, by reason of the imports of the subject merchandise sold at LTFV. In addition, the petitioners allege that subject imports exceed the negligibility threshold provided for under section 771(24)(A) of the Act.[25]

    The petitioners contend that the industry's injured condition is illustrated by a significant and increasing volume and market share of subject imports; underselling and price depression or suppression; lost sales and revenue; declining employment levels; and declining financial performance.[26] We assessed the allegations and supporting evidence regarding material injury, threat of material injury, causation, as well as negligibility, and we have determined that these allegations are properly supported by adequate evidence, and meet the statutory requirements for initiation.[27]

    Allegations of Sales at LTFV

    The following is a description of the allegations of sales at LTFV upon which Commerce based its decision to initiate an AD investigation of imports of copper pipe and tube from Vietnam. The sources of data for the deductions and adjustments relating to U.S. price and normal value (NV) are discussed in greater detail in the Initiation Checklist.

    U.S. Price

    The petitioners based export price (EP) on pricing information for a sales offer for copper pipe and tube produced in and exported from Vietnam. The petitioners made certain adjustments to U.S. price to calculate a net ex-factory U.S. price.[28]

    Normal Value

    Commerce considers Vietnam to be an NME country.[29] In accordance with section 771(18)(C)(i) of the Act, any determination that a foreign country is an NME country shall remain in effect until revoked by Commerce. Therefore, we continue to treat Vietnam as an NME country for purposes of the initiation of this investigation. Accordingly, NV in Vietnam is appropriately based on factors of production (FOPs) valued in a surrogate market economy country, in accordance with section 773(c) of the Act.

    The petitioners claim that India is an appropriate surrogate country because India is a market economy country that is at a level of economic development comparable to that of Vietnam and is a significant producer of comparable merchandise.[30] The petitioners provided publicly available information from India to value all FOPs.[31] Based on the information provided by the petitioners, we determine that it is appropriate to use India as a surrogate country for Vietnam for initiation purposes.

    Interested parties will have the opportunity to submit comments regarding surrogate country selection and, pursuant to 19 CFR 351.301(c)(3)(i), will be provided an opportunity to submit publicly available information to value FOPs within 30 days before the scheduled date of the preliminary determination.

    Factors of Production

    The petitioners used their own product-specific consumption rates as a surrogate to value Vietnamese manufacturers' FOPs.[32] Additionally, the petitioners calculated factory overhead; selling, general and administrative expenses; and profit based on the experience of an Indian producer of comparable merchandise (e.g., seamless extruded copper and copper base alloy tubes, rods, sections).[33]

    Fair Value Comparisons

    Based on the data provided by the petitioners, there is reason to believe that imports of copper pipe and tube from Vietnam are being, or are likely to be, sold in the United States at LTFV. Based on comparisons of EP to NV in accordance with sections 772 and 773 of the Act, the estimated dumping margin for copper pipe and tube from Vietnam is 111.82 percent.[34]

    Initiation of LTFV Investigation

    Based upon the examination of the Petition and supplemental response, we find that it meets the requirements of section 732 of the Act. Therefore, we are initiating an AD investigation to determine whether imports of copper pipe and tube from Vietnam are being, or are likely to be, sold in the United States at LTFV. In accordance with section 733(b)(1)(A) of the Act and 19 CFR 351.205(b)(1), unless postponed, we will make our preliminary determination no later than 140 days after the date of this initiation.

    Respondent Selection

    In the Petition, the petitioners named five companies in Vietnam as producers/exporters of copper pipe and tube.[35]

    In accordance with our standard practice for respondent selection in AD investigations involving NME countries, Commerce selects respondents based on quantity and value (Q&V) questionnaires in cases where it has determined that the number of companies is large and it cannot individually examine each company based upon its resources. Therefore, considering the number of producers and exporters identified in the Petition, Commerce will solicit Q&V information that can serve as a basis for selecting exporters for individual examination in the event that Commerce decides to limit the number of respondents individually examined pursuant to section 777A(c)(2) of the Act. Because there are five producers and exporters identified in the Petition, Commerce has determined that it will issue Q&V questionnaires to each potential respondent for which the petitioners have provided a complete address.Start Printed Page 47184

    In addition, Commerce will post the Q&V questionnaire along with filing instructions on E&C's website at https://enforcement.trade.gov/​questionnaires/​questionnaires-ad.html. Producers/exporters of copper pipe and tube from Vietnam that do not receive Q&V questionnaires may still submit a response to the Q&V questionnaire and can obtain a copy of the Q&V questionnaire from E&C's website. In accordance with the standard practice for respondent selection in AD cases involving NME countries, in the event Commerce decides to limit the number of respondents individually investigated, Commerce intends to base respondent selection on the responses to the Q&V questionnaire that it receives.

    Responses to the Q&V questionnaire must be submitted by the relevant Vietnamese producers/exporters no later than 5:00 p.m. ET on August 5, 2020. All Q&V questionnaire responses must be filed electronically via ACCESS. An electronically filed document must be received successfully, in its entirety, by ACCESS no later than 5:00 p.m. ET on the deadline noted above.

    Interested parties must submit applications for disclosure under Administrative Protective Order (APO) in accordance with 19 CFR 351.305(b). Instructions for filing such applications may be found on E&C's website at http://enforcement.trade.gov/​apo. Commerce intends to finalize its decisions regarding respondent selection within 20 days of publication of this notice.

    Separate Rates

    In order to obtain separate-rate status in an NME investigation, exporters and producers must submit a separate-rate application.[36] The specific requirements for submitting a separate-rate application in a Vietnam investigation are outlined in detail in the application itself, which is available on Commerce's website at http://enforcement.trade.gov/​nme/​nme-sep-rate.html. The separate-rate application will be due 30 days after publication of this initiation notice.[37] Exporters and producers who submit a separate-rate application and have been selected as mandatory respondents will be eligible for consideration for separate-rate status only if they respond to all parts of Commerce's AD questionnaire as mandatory respondents. Commerce requires that companies from Vietnam submit a response to both the Q&V questionnaire and the separate-rate application by the respective deadlines in order to receive consideration for separate-rate status. Companies not filing a timely Q&V questionnaire response will not receive separate rate consideration.

    Use of Combination Rates

    Commerce will calculate combination rates for certain respondents that are eligible for a separate rate in an NME investigation. The Separate Rates and Combination Rates Bulletin states:

    {w}hile continuing the practice of assigning separate rates only to exporters, all separate rates that the {Commerce} will now assign in its NME Investigation will be specific to those producers that supplied the exporter during the period of investigation. Note, however, that one rate is calculated for the exporter and all of the producers which supplied subject merchandise to it during the period of investigation. This practice applies both to mandatory respondents receiving an individually calculated separate rate as well as the pool of non-investigated firms receiving the weighted-average of the individually calculated rates. This practice is referred to as the application of “combination rates” because such rates apply to specific combinations of exporters and one or more producers. The cash-deposit rate assigned to an exporter will apply only to merchandise both exported by the firm in question and produced by a firm that supplied the exporter during the period of investigation.[38]

    Distribution of Copies of the AD Petition

    In accordance with section 732(b)(3)(A) of the Act and 19 CFR 351.202(f), a copy of the public version of the AD Petition has been provided to the government of Vietnam via ACCESS. To the extent practicable, we will attempt to provide a copy of the public version of the AD Petition to each exporter named in the AD Petition, as provided under 19 CFR 351.203(c)(2).

    ITC Notification

    We will notify the ITC of our initiation, as required by section 732(d) of the Act.

    Preliminary Determination by the ITC

    The ITC will preliminarily determine, within 45 days after the date on which the AD Petition were filed, whether there is a reasonable indication that imports of copper pipe and tube from Vietnam are materially injuring, or threatening material injury to, a U.S. industry.[39] A negative ITC determination will result in the investigation being terminated.[40] Otherwise, this AD investigation will proceed according to statutory and regulatory time limits.

    Submission of Factual Information

    Factual information is defined in 19 CFR 351.102(b)(21) as: (i) Evidence submitted in response to questionnaires; (ii) evidence submitted in support of allegations; (iii) publicly available information to value factors under 19 CFR 351.408(c) or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence placed on the record by Commerce; and (v) evidence other than factual information described in (i)-(iv). Section 351.301(b) of Commerce's regulations requires any party, when submitting factual information, to specify under which subsection of 19 CFR 351.102(b)(21) the information is being submitted [41] and, if the information is submitted to rebut, clarify, or correct factual information already on the record, to provide an explanation identifying the information already on the record that the factual information seeks to rebut, clarify, or correct.[42] Time limits for the submission of factual information are addressed in 19 CFR 351.301, which provides specific time limits based on the type of factual information being submitted. Interested parties should review the regulations prior to submitting factual information in this investigation.

    Extensions of Time Limits

    Parties may request an extension of time limits before the expiration of a time limit established under 19 CFR 351.301, or as otherwise specified by Commerce. In general, an extension request will be considered untimely if it is filed after the expiration of the time limit established under 19 CFR 351.301. For submissions that are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. ET on the due date. Under certain circumstances, we may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, we will inform parties in a letter or memorandum of the deadline (including a specified time) by which extension requests must be filed to be Start Printed Page 47185considered timely. An extension request must be made in a separate, stand-alone submission; under limited circumstances we will grant untimely-filed requests for the extension of time limits. Parties should review Extension of Time Limits; Final Rule, 78 FR 57790 (September 20, 2013), available at http://www.gpo.gov/​fdsys/​pkg/​FR-2013-09-20/​html/​2013-22853.htm,, prior to submitting factual information in this investigation.

    Certification Requirements

    Any party submitting factual information in an AD or countervailing duty proceeding must certify to the accuracy and completeness of that information.[43] Parties must use the certification formats provided in 19 CFR 351.303(g).[44] Commerce intends to reject factual submissions if the submitting party does not comply with the applicable certification requirements.

    Notification to Interested Parties

    Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305. On January 22, 2008, Commerce published Antidumping and Countervailing Duty Proceedings: Documents Submission Procedures; APO Procedures, 73 FR 3634 (January 22, 2008). Parties wishing to participate in this investigation should ensure that they meet the requirements of these procedures (e.g., the filing of letters of appearance as discussed at 19 CFR 351.103(d)). Note that Commerce has temporarily modified certain of its requirements for serving documents containing business proprietary information, until further notice.[45]

    This notice is issued and published pursuant to sections 732(c)(2) and 777(i) of the Act, and 19 CFR 351.203(c).

    Start Signature

    Dated: July 20, 2020

    Jeffrey I. Kessler,

    Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix—Scope of the Investigation

    The products covered by this investigation are all seamless circular refined copper pipes and tubes, including redraw hollows, greater than or equal to 6 inches (152.4 mm) in actual length and measuring less than 12.130 inches (308.102 mm) in actual outside diameter (OD), regardless of wall thickness, bore (e.g., smooth, enhanced with inner grooves or ridges), manufacturing process (e.g., hot finished, cold-drawn, annealed), outer surface (e.g., plain or enhanced with grooves, ridges, fins, or gills), end finish (e.g., plain end, swaged end, flared end, expanded end, crimped end, threaded), coating (e.g., plastic, paint), insulation, attachments (e.g., plain, capped, plugged, with compression or other fitting), or physical configuration (e.g., straight, coiled, bent, wound on spools).

    The scope of this investigation covers, but is not limited to, seamless refined copper pipe and tube produced or comparable to the American Society for Testing and Materials (ASTM) ASTM-B42, ASTM-B68, ASTM-B75, ASTM-B88, ASTM-B88M, ASTM-B188, ASTM-B251, ASTM-B251M, ASTM-B280, ASTM-B302, ASTM-B306, ASTM-B359, ASTM-B743, ASTM-B819, and ASTM-B903 specifications and meeting the physical parameters described therein.

    Also included within the scope of this investigation are all sets of covered products, including “line sets” of seamless refined copper tubes (with or without fittings or insulation) suitable for connecting an outdoor air conditioner or heat pump to an indoor evaporator unit. The phrase “all sets of covered products” denotes any combination of items put up for sale that is comprised of merchandise subject to the scope.

    “Refined copper” is defined as: (1) Metal containing at least 99.85 percent by actual weight of copper; or (2) metal containing at least 97.5 percent by actual weight of copper, provided that the content by actual weight of any other element does not exceed the following limits:

    ElementLimiting content percent by weight
    Ag—Silver0.25
    As—Arsenic0.5
    Cd—Cadmium1.3
    Cr—Chromium1.4
    Mg—Magnesium0.8
    Pb—Lead1.5
    S—Sulfur0.7
    Sn—Tin0.8
    Te—Tellurium0.8
    Zn—Zinc1.0
    Zr—Zirconium0.3
    Other elements (each)0.3

    Excluded from the scope of this investigation are all seamless circular hollows of refined copper less than 12 inches in actual length whose actual OD exceeds its actual length.

    The products subject to this investigation are currently classifiable under subheadings 7411.10.1030 and 7411.10.1090 of the Harmonized Tariff Schedule of the United States (HTSUS). Products subject to the investigation may also enter under HTSUS subheadings 7407.10.1500, 7419.99.5050, 8415.90.8065, and 8415.90.8085. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the investigation is dispositive.

    End Supplemental Information

    Footnotes

    1.  The petitioners are the American Copper Tube Coalition and its constituent members (collectively, the petitioners). The members of the American Copper Tube Coalition are: Mueller Copper Tube Products, Inc., Mueller Copper Tube West Co., Mueller Copper Tube Company, Inc., Howell Metal Company, and Linesets, Inc. (collectively, Mueller Group), and Cerro Flow Products, LLC.

    Back to Citation

    2.  See Petitioners' Letter, “Seamless Refined Copper Pipe and Tube from Vietnam: Antidumping Duty Petition,” dated June 30, 2020 (the Petition).

    Back to Citation

    3.  See Commerce's Letter, “Petition for the Imposition of Antidumping Duties on Imports of Seamless Refined Copper Pipe and Tube from the Socialist Republic of Vietnam: Supplemental Questions,” dated July 6, 2020 (Petition Supplemental).

    Back to Citation

    4.  See Petitioners' Letter, “Seamless Refined Copper Pipe and Tube from Vietnam: Amendment of Petition and Response to Commerce's Supplemental Questions,” dated July 9, 2020 (Petition Supplement).

    Back to Citation

    5.  See infra, section on “Determination of Industry Support for the Petition”.

    Back to Citation

    6.  See Petition Supplemental at 3.

    Back to Citation

    7.  See Petition Supplement at Exhibit SUP-3.

    Back to Citation

    8.  See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) (Preamble).

    Back to Citation

    9.  See 19 CFR 351.102(b)(21) (defining “factual information”).

    Back to Citation

    10.  Commerce's practice dictates that where a deadline falls on a weekend or Federal holiday, the appropriate deadline is the next business day (in this instance, August 10, 2020). See Notice of Clarification: Application of “Next Business Day” Rule for Administrative Determination Deadlines Pursuant to the Tariff Act of 1930, As Amended, 70 FR 24533 (May 10, 2005) (Next Business Day Rule).

    Back to Citation

    12.  See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011); see also Enforcement and Compliance; Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on help using ACCESS can be found at https://access.trade.gov/​help.aspx and a handbook can be found at https://access.trade.gov/​help/​Handbook%20on%20 Electronic%20Filling%20Procedures.pdf.

    Back to Citation

    13.  See 19 CFR 351.303(b). Commerce practice dictates that where a deadline falls on a weekend or Federal holiday (in this instance, August 9, 2020), the appropriate deadline is the next business day. See Next Business Day Rule, 70 FR at 24533.

    Back to Citation

    14.  See section 771(10) of the Act.

    Back to Citation

    15.  See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).

    Back to Citation

    16.  See Petition at 21-24; see also Petition Supplement at 1 and Exhibits SUP-1 and SUP-2.

    Back to Citation

    17.  For a discussion of the domestic like product analysis as applied to this case and information regarding industry support, see the Initiation Checklist at Attachment II, Analysis of Industry Support for the Antidumping Duty Petition Covering Seamless Refined Copper Pipe and Tube from the Socialist Republic of Vietnam (Attachment II). This checklist is dated concurrently with, and hereby adopted by, this notice and on file electronically via ACCESS.

    Back to Citation

    18.  See Petition at 3-4 and Exhibits 2-4; see also Petition Supplement at 2-3 and Exhibit SUP-4.

    Back to Citation

    19.  See Petition at 3-4 and Exhibits 2-4; see also Petition Supplement at 2-3 and Exhibit SUP-4. For further discussion, see Attachment II of the Initiation Checklist.

    Back to Citation

    20.  See Attachment II of the Initiation Checklist.

    Back to Citation

    21.  Id.; see also section 732(c)(4)(D) of the Act.

    Back to Citation

    22.  See Attachment II of the Initiation Checklist.

    Back to Citation

    25.  See the Petition at 24-25 and Exhibit 36.

    Back to Citation

    26.  See the Petition at 1-2, 19-20, 24-46 and Exhibits 36-43.

    Back to Citation

    27.  See Initiation Checklist at Attachment III, Analysis of Allegations and Evidence of Material Injury and Causation for the Antidumping Duty Petition Covering Seamless Refined Copper Pipe and Tube from the Socialist Republic of Vietnam.

    Back to Citation

    28.  See Initiation Checklist at 6.

    Back to Citation

    29.  See, e.g., Certain Frozen Fish Fillets from the Socialist Republic of Vietnam: Final Results, and Final Results of No Shipments of the Antidumping Duty Administrative Review; 2016-2017, 84 FR 18007 (April 29, 2019).

    Back to Citation

    30.  See Petition at 16-17 and Exhibits 24-25.

    Back to Citation

    31.  See Petition at 18-19 and Exhibits 29-35; see also Petition Supplement at 6-8 and Exhibits SUP-10, SUP-11, SUP-13, SUP-14, SUP-15, and SUP-16.

    Back to Citation

    32.  See Petition at 17 and Exhibit 26; see also Petition Supplement at 6.

    Back to Citation

    33.  See Petition at 19 and Exhibits 34 and 35; see also Petition Supplement at 8 and Exhibit SUP-16.

    Back to Citation

    34.  See Petition Supplement at Exhibit SUP-17.

    Back to Citation

    35.  See the Petition at 15 and Exhibit 20; see also Petition Supplement at 4 and Exhibit SUP-7.

    Back to Citation

    36.  See Policy Bulletin 05.1: “Separate-Rates Practice and Application of Combination Rates in Antidumping Investigation involving NME Countries,” (April 5, 2005), available at http://enforcement.trade.gov/​policy/​bull05-1.pdf (Policy Bulletin 05.1).

    Back to Citation

    37.  Although in past investigations this deadline was 60 days, consistent with 19 CFR 351.301(a), which states that “the Secretary may request any person to submit factual information at any time during a proceeding,” this deadline is now 30 days.

    Back to Citation

    38.  See Policy Bulletin 05.1 at 6 (emphasis added).

    Back to Citation

    39.  See section 733(a) of the Act.

    Back to Citation

    43.  See section 782(b) of the Act.

    Back to Citation

    44.  See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). Answers to frequently asked questions regarding the Final Rule are available at http://enforcement.trade.gov/​tlei/​notices/​factual_​info_​final_​rule_​FAQ_​07172013.pdf.

    Back to Citation

    45.  See Temporary Rule Modifying AD/CVD Service Requirements Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July 10, 2020).

    Back to Citation

    [FR Doc. 2020-17067 Filed 8-3-20; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Published:
08/04/2020
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2020-17067
Dates:
Applicable July 20, 2020.
Pages:
47181-47185 (5 pages)
Docket Numbers:
A-552-831
PDF File:
2020-17067.Pdf
Supporting Documents:
» Requests for Nominations: Trade Promotion Coordinating Committee
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Drawn Stainless Steel Sinks from the People's Republic of China; Recission
» Determinations of Sales at Less than Fair Value: Certain Carbon and Alloy Steel Cut-to-Length Plate from Brazil, South Africa, and Republic of Turkey
» Meetings: United States Travel and Tourism Advisory Board
» Investigations; Determinations, Modifications, and Rulings, etc.: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from Republic of Turkey
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Carbon and Alloy Steel Cut-to-Length Plate from People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Pasta from Italy
» Determinations of Sales at Less Than Fair Value: Truck and Bus Tires From People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Initiation of Five-Year (Sunset) Review