03-20016. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 3, 2003 to July 11, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2003-0037 and the specific PMN number or TME number, must be received on or before September 5, 2003.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Acting Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of This Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0037. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is [phone] and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is [phone].

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2003-0037. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to [e-mail], Attention: Docket ID Number OPPT-2003-0037 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0037 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

D. How Should I Submit CBI To the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking This Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from June 3, 2003 to July 11, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 104 Premanufacture Notices Received From: 06/03/03 to 07/11/03

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-03-0588	06/03/03	08/31/03	CBI	(G) Polymeric admixture for cements	(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium sodium salt
P-03-0589	06/03/03	08/31/03	The Dow Chemical Company	(G) Prepolymer for isocyanate polyurethane	(G) Polyurethane prepolymer
P-03-0590	06/03/03	08/31/03	PFW Aroma Chemicals - Sales Office USA	(S) Fragrance oil in detergent, fabric softener and household cleaners; fragrance oil in soaps, hair care, bath and shower and personal care; fragrance oil in fine perfumes; fragrance oil in air fresheners, candles, potpourri	(S) 1-hexanol, 3-mercapto-
P-03-0591	06/03/03	08/31/03	The Dow Chemical Company	(G) Prepolymer for isocyanate polyurethane	(G) Water dispersable polyurethane polymer
P-03-0593	06/03/03	08/31/03	CBI	(G) Chemical intermediate	(G) Alkoxylated acetal-derivative
P-03-0594	06/03/03	08/31/03	CBI	(G) Chemical intermediate	(G) Alkoxylated acetal-derivative
P-03-0595	06/05/03	09/02/03	CBI	(S) Polymerization catalyst	(G) Trialkylaluminum metal halide alkoxide reaction product
P-03-0596	06/05/03	09/02/03	CBI	(S) Aromatic acid salt used as a component in electronic polishing products	(G) Aromatic acid salt
P-03-0597	06/05/03	09/02/03	CBI	(G) Reaction intermediate/raw material	(S) Fatty acids, rape-oil, me esters
P-03-0598	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0599	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0600	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0601	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0602	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0603	06/05/03	09/02/03	CBI	(G) Lubricant additive	(G) Sulfurized vegetable oil
P-03-0604	06/06/03	09/03/03	3M Company	(S) Monomer	(G) Fluorinated methacrylated monomer
P-03-0605	06/06/03	09/03/03	Johnson Polymer	(G) Polymeric coating vehicle	(G) Styrene acrylic copolymer
P-03-0606	06/06/03	09/03/03	Johnson Polymer	(G) Polymeric coating vehicle	(G) Styrene acrylic copolymer
P-03-0607	06/03/03	08/31/03	CBI	(G) Photographic Chemical	(G) Disubstituted aniline
P-03-0608	06/09/03	09/06/03	Lonza Inc.	(S) Polymer additive/adjuvant for: -polymer extrusion; -polymer film formation; antistatic agent for : -polymer films	(G) N,N-alkanebis-N-fatty acid amide
P-03-0609	06/09/03	09/06/03	BASF Corporation	(S) Auxiliary for dyeing leather	(G) Oligomer of aromatic, alkyl amines and alkyl epoxide
P-03-0610	06/03/03	08/31/03	CBI	(G) Raw material	(G) Fatty acid ester
P-03-0611	06/03/03	08/31/03	CBI	(G) Raw material	(G) Fatty acid ester
P-03-0612	06/10/03	09/07/03	BASF Corporation	(S) Scale inhibitor in desalination of seawater	(G) Maleic acid copolymer, sodium salt
P-03-0613	06/10/03	09/07/03	CBI	(G) Curing catalyst	(G) Modified diaryliodoniumhexafluoroantimonate
P-03-0614	06/10/03	09/07/03	CBI	(G) Electronic Chemical	(G) Aromatic ether
P-03-0615	06/10/03	09/07/03	The Dow Chemical Company	(S) Adhesion promoter for resins used to make microelectronic parts	(G) Hydrolyzed silane
P-03-0616	06/10/03	09/07/03	Bedoukian Research, Inc.	(S) Chemical intermediate	(G) Unsaturated alkyl grignard reagent
P-03-0617	06/10/03	09/07/03	Bedoukian Research, Inc.	(S) Fragrances uses as per Federal Food, Drug and Cosmetic Act (FFDCA); flavor uses as per FFDCA; fragrances uses; scented papers, detergents, candles, etc.	(S) 3-pentenoic acid, 2-methyl-, hexyl ester
P-03-0618	06/10/03	09/07/03	The Dow Chemical Company	(S) Adhesion promoter for resins used to make microelectronic parts.	(G) Silsesquioxane
P-03-0619	06/11/03	09/08/03	CBI	(G) Fuel additive	(G) Fatty acid, reaction product with alkylamino alcohol, propoxylated
P-03-0620	06/11/03	09/08/03	CBI	(G) Chelating agent	(G) Aminocarboxylic acid, alkaline salt
P-03-0621	06/11/03	09/08/03	CBI	(G) Chelating agent	(G) Aminocarboxylic acid, alkaline salt
P-03-0622	06/11/03	09/08/03	CBI	(G) A component of ultraviolet coating agent	(G) Substituted alkanediol diacrylate
P-03-0623	06/12/03	09/09/03	CBI	(G) Non-dispersive use.	(G) Amino epoxy silane
P-03-0624	06/12/03	09/09/03	Dupont Textiles and Interiors	(S) Chemical intermediate	(S) Dodecanedioic acid, dimethyl ester
P-03-0625	06/12/03	09/09/03	Crompton Corporation	(G) Soluble oil base	(G) Alkyl benzenesulfonic acid, sodium salt
P-03-0626	06/12/03	09/09/03	CBI	(G) Open, non-dispersive (resin)	(G) Urethane acrylate
P-03-0627	06/16/03	09/13/03	Sasol North America Inc.	(S) Surfactant used in formulation of deicing fluids	(S) Fatty acids, C16-18 and C18-unsaturated, esters with polyethylene glycol mono-me ether
P-03-0628	06/16/03	09/13/03	CBI	(G) Raw material for manufacturing of photosensitive material	(G) Pyrrolotriazole derivative
P-03-0629	06/16/03	09/13/03	CBI	(G) Coatings and inks	(G) Polyether polyester aminoacrylate
P-03-0630	06/16/03	09/13/03	CBI	(G) Coatings and inks	(G) Polyether polyester aminoacrylate
P-03-0631	06/16/03	09/13/03	CBI	(G) Thermoset polymer component, open nondispersive use	(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin
P-03-0632	06/16/03	09/13/03	CBI	(S) Polyurethane coating	(G) Aqueous polyurethane dispersion
P-03-0633	06/16/03	09/13/03	CBI	(G) Raw material for manufacturing of photosensitive material	(G) Alkylamide derivative
P-03-0634	06/16/03	09/13/03	CBI	(G) Thermoset polymer component, open nondispersive use	(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer
P-03-0635	06/16/03	09/13/03	CBI	(G) Thermoset polymer component, open nondispersive use	(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer
P-03-0636	06/16/03	09/13/03	CBI	(S) Industrial ultraviolet coatings and inks	(G) Epoxy acrylate oligomer
P-03-0637	06/16/03	09/13/03	CBI	(G) Adhesive	(G) Polysiloxane
P-03-0638	06/16/03	09/13/03	CBI	(G) Water-borne coating	(G) Water-borne urethane polymer
P-03-0639	06/16/03	09/13/03	CBI	(G) Contained use polymer reactant	(G) Quaternary ammonium salt
P-03-0640	06/17/03	09/14/03	Cytec Engineered Materials Inc. (CEM)	(G) Resin for non-dispersive use	(G) Epoxy-bisphenol adduct
P-03-0641	06/17/03	09/14/03	BASF Corporation	(S) Nonionic surfactant for hard surface cleaners; nonionic surfactant for powder laundry detergents	(S) Alcohols, C13-15-branched and linear, ethoxylated
P-03-0642	06/16/03	09/13/03	CBI	(G) Starting material for the manufacture of an AgroChemical intermediate.	(G) Disubstituted benzenesulfonic acid, alkali metal salt
P-03-0643	06/16/03	09/13/03	CBI	(G) Used as an intermediate in the synthesis of an AgroChemical product.	(G) Disubstituted benzoic acid, alkali metal salt.
P-03-0644	06/18/03	09/15/03	CBI	(G) Radiation curable inks, coatings and printing plates.	(G) Acrylate ester
P-03-0645	06/18/03	09/15/03	Mitsubishi Gas Chemical America, Inc.	(S) Water retention aid for ornamental plants	(G) Polyether polyol
P-03-0646	06/19/03	09/16/03	PPG Industries, Inc.	(G) Component of a coating	(G) Cationic amine salt epoxy resin
P-03-0647	06/19/03	09/16/03	Reichhold, Inc.	(G) Ink base	(G) Amine salt of diglycidyl ether of bisphenol a, bisphenol a, fatty acids, alkeneoic acid and alkenylbenzene.
P-03-0648	06/19/03	09/16/03	Nagase America Corporation	(S) Matting agent for paint/coating; light diffussing agent for film coating/plastic compounding; anti-blocking agent for film	(S) 2-propenoic acid, 2-methyl-, 1,2-ethanediyl ester, polymer with butyl 2-methyl-2-propenoate
P-03-0649	06/19/03	09/16/03	CBI	(G) Cleaning additive for semiconductor manufacturing	(G) Acrylic acid copolymer salt; alkyl phosphonic acid salt; substituted carboxylic acid salt
P-03-0650	06/20/03	09/17/03	Harcros Chemicals Inc.	(G) A catalyst for ethoxylation/propoxylation reactions	(G) Organosulfate calcium hydroxy complex
P-03-0651	06/20/03	09/17/03	CBI	(G) Sizing agent for glass fiber manufacture	(G) Polyurethane
P-03-0652	06/20/03	09/17/03	BASF Corporation	(G) Components in composite formulations	(G) Polymethylenepolyphenylene isocyanate methacrylate polymer
P-03-0653	06/23/03	09/20/03	CBI	(G) Polymeric admixture for cements	(G) Polycarboxylate polymer with alkenylsubstituted carbomonocycle, modified with poly(oxyalkylenediyl) and polymer of heteromonocycle and alkylheteromonocycle monoalkyl ether, sodium salt
P-03-0654	06/20/03	09/17/03	CBI	(S) Adhesive raw material for lamination and heat sealing	(G) Polyurethane - polyester elastomer
P-03-0655	06/16/03	09/13/03	Archer Daniels Midland Company	(S) Reactive coalescer in architectural paint, coatings and stain; inks; color concentrates for paint coloring	(S) Fatty acids, corn-oil, esters with propylene glycol
P-03-0656	06/24/03	09/21/03	Archer Daniels Midland Company	(S) Reactive coalescer in architectural paint, coatings and stain; inks; color concentrates for paint coloring	(S) Fatty acids, sunflower-oil, esters with propylene glycol
P-03-0657	06/24/03	09/21/03	Cognis Corporation	(G) Low foaming wetting agent	(S) Oxirane, methyl-, polymer with oxirane, mono C8-10 alkyl ethers, ethers with 1,2-decanediol(1:1)
P-03-0658	06/24/03	09/21/03	Cognis Corporation	(G) Low foaming wetting agent	(S) Poly(oxy-1,2-ethanediyl), .alpha.-undecyl-.omega.-hydroxy-, branched and linear, ethers with 1,2-decanediol
P-03-0659	06/24/03	09/21/03	Cognis Corporation	(G) Low foaming wetting agent	(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono C8-10-alkyl ethers, ethers with 1,2-dodecanediol (1:1)
P-03-0660	06/24/03	09/21/03	Cognis Corporation	(G) Low foaming wetting agent	(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, mono C6-12-alkyl ethers, ethers with 1,2-decanediol (1:1)
P-03-0661	06/23/03	09/20/03	Marubeni Specialty Chemicals, Inc.	(S) Manufacture of integrated circuit chips	(G) Mixture of substituted thiobisphenol and alkyl oxirane and dimeric substance of reaction products of substituted thiobisphenol and alkyl oxirane.
P-03-0662	06/24/03	09/21/03	Essential Industries	(S) Raw material for wood coatings	(G) Aliphatic polyurethane dispersion
P-03-0663	06/25/03	09/22/03	CBI	(G) A component of ultraviolet coating agent	(G) Aliphatic epoxyacrylate
P-03-0664	06/27/03	09/24/03	CBI	(G) Open, non-dispersive (resin)	(G) Urethane acrylate resin
P-03-0665	07/01/03	09/28/03	CBI	(G) An open non-dispersive use	(G) Alkyd resin
P-03-0666	07/01/03	09/28/03	BASF Corporation	(G) Intermediate in the production of pigments	(G) Distillation residue from glycol production.
P-03-0667	07/01/03	09/28/03	CBI	(G) Open, non-dispersive	(G) Urea dimethoxyethanal resin
P-03-0668	07/02/03	09/29/03	CBI	(G) Acrylic pressure sensitive adhesive	(G) Acrylic solution polymer
P-03-0669	07/07/03	10/04/03	CBI	(S) Binders for fibrous materials	(G) Modified acrylic acid-maleic acid copolymer
P-03-0670	07/07/03	10/04/03	CBI	(G) Coatings and inks	(G) Polyether polyester aminoacrylate
P-03-0671	07/07/03	10/04/03	CBI	(G) Coatings and inks	(G) Polyether polyester aminoacrylate
P-03-0672	07/07/03	10/04/03	Omnova Solutions, Inc.	(S) Surfactant for aqueous floor polish; surfactant, flow, level, and wetting additive for aqueous coating formulations; surfactant, flow, and wetting additive for hard surface cleaners	(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,2-trifluoroethoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt
P-03-0673	07/07/03	10/04/03	Omnova solutions, Inc.	(S) Surfactant for aqueous floor polish; surfactant, flow, level, and wetting additive for aqueous coating formulations; surfactant, flow, and wetting additive for hard surface cleaners	(S) Boron, trifluoro(tetrahydrofuran)-, (t-4)-, polymer with 3-methyl-3-[(2,2,3,3,3-pentafluoropropoxy)methyl]oxetane, ether with 2,2-dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt
P-03-0674	07/08/03	10/05/03	Lubrizol metalworking additives	(S) Lubricant, metalworking fluid	(G) Polyolefin ester, amine salt
P-03-0675	07/08/03	10/05/03	Sasol North America Inc.	(S) Surfactant used in formulation of deicing fluids	(S) Fatty acids, C16-18 and C18-unsaturated, esters with polyethylene glycol mono-me ether
P-03-0676	07/10/03	10/07/03	CIBA Specialty Chemicals Corporation, Textile Effects	(S) For oil, water, and soil repellent finish of fabrics of all fibers	(G) Alkyl polyurethane polymer with substituted fluoroalkene telomer reaction products and substituted alkyl and cycloalkyl isocyanates reaction products
P-03-0677	07/10/03	10/07/03	CIBA Specialty Chemicals Corporation, Textile Effects	(S) For oil, water, and soil repellant finish of fabrics of all fibers	(G) Substituted alkyl acid alkyl ester polymers with substituted fluoroalkene telomer reaction products
P-03-0678	07/10/03	10/07/03	Eastman Chemical Company	(G) Coating vehicle	(G) Styrene-acrylic copolymer
P-03-0679	07/10/03	10/07/03	Atofina Chemicals, Inc.	(S) Additive for hot melt adhesive	(G) Olefin acrylate copolymer
P-03-0680	07/11/03	10/08/03	CBI	(G) Raw material	(G) Fatty acid ester
P-03-0681	07/11/03	10/08/03	CBI	(G) Photographic Chemical	(G) Disubstituted aniline
P-03-0682	07/11/03	10/08/03	CBI	(G) Ultraviolet/electron beam curing agent (all categories)	(G) Acid functional acrylate
P-03-0683	07/11/03	10/08/03	CBI	(G) Coatings, adhesives and printing plates	(G) Polybutadiene acrylate
P-03-0684	07/11/03	10/08/03	CBI	(G) Coatings, adhesives and printing plates	(G) Polybutadiene acrylate
P-03-0685	07/11/03	10/08/03	CBI	(G) Raw material	(G) Fatty acid ester
P-03-0708	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monoepoxide
P-03-0709	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monoepoxide
P-03-0710	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monoepoxide
P-03-0711	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monoepoxide
P-03-0712	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monoepoxide
P-03-0713	07/11/03	10/08/03	The Dow Chemical Company	(S) Surfactant for waterborne epoxy dispersions	(G) Polyetherester monopoxide
P-03-0738	06/25/03	09/22/03	CBI	(G) Plastic additive	(G) Silicate

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 54 Notices of Commencement From: 06/03/03 to 07/11/03

Case No.	Received Date	Commencement/Import Date	Chemical
	06/09/03	06/02/03	(G) Polyurethane-silicone
P-00-0281	07/08/03	06/24/03	(G) Alkarylsulfonic acid, sodium salts
P-01-0245	06/11/03	04/25/03	(G) Mixture of oxygenated hydrocarbons
P-01-0573	06/24/03	06/12/03	(G) Aromatic phenolic polymer
P-01-0708	06/17/03	06/13/03	(G) Polyalkoxylated aromatic amine
P-01-0829	06/10/03	05/20/03	(S) 17-oxabicyclo[14.1.0]heptadec-8-ene; 9,18-dioxatricyclo [15.1.0.08,10] octadecane
P-02-0141	06/16/03	05/15/03	(G) Polyalkenylbenzene sulfonate
P-02-0152	06/25/03	05/21/03	(G) N-substituted-2-methyl-2-propenamide, polymer with 2-propenamide and 2-propenoic acid, sodium salt
P-02-0246	06/30/03	06/18/03	(G) Acrylic polyol
P-02-0285	07/01/03	06/10/03	(S) Silane, trimethoxy[3-oriranylmethoxy]propyl-, reaction products with wollastonite (ca(sio3)
P-02-0299	07/08/03	04/25/03	(S) 2-propenoic acid, polymer with ethyl 2-propenoate, potassium salt
P-02-0306	06/05/03	04/16/03	(S) 1-propanone, 1-[4-[(4-benzoylphenyl)thio]phenyl]-2-methyl-2-[(4-methylphenyl)sulfonyl]-
P-02-0382	06/16/03	05/15/03	(G) Alkylbenzene sulfonate
P-02-0529	06/20/03	05/20/03	(G) Diglyceride fatty acid, acetylated
P-02-0530	07/02/03	06/23/03	(G) Alpha-amino ketone
P-02-0745	06/03/03	05/21/03	(G) Aqueous solution of iminodisuccinic acid ammonium salt
P-02-0823	07/08/03	06/26/03	(G) Tertiary amine carboxylic acid salt
P-02-0825	07/08/03	06/26/03	(G) Tertiary amine
P-02-0937	06/16/03	06/05/03	(G) Alkanone oxime
P-02-1084	06/06/03	06/02/03	(S) Siloxanes and silicones, ethoxy pr, ethoxy vinyl, ethoxy-terminated, hydrolysis products with aluminum hydroxide
P-03-0001	06/09/03	06/02/03	(G) Substituted triazine derivatives
P-03-0139	07/03/03	06/14/03	(G) Tricyclic acetal
P-03-0151	07/03/03	06/12/03	(G) Benzendisulfonic acid, substituted anthraquinone derivative, ammonium sodium salt
P-03-0154	06/10/03	05/15/03	(S) 1,2-benzenedicarboxylic acid, mixed esters with benzyl alc., cyclohexanol, 2-ethyl-1-hexanol, fumaric acid and propylene glycol
P-03-0180	07/01/03	06/11/03	(S) Cytidine, 2'-deoxy-, monohydrochloride
P-03-0183	07/01/03	06/05/03	(G) Methyl styrene acrylonitrile copolymer
P-03-0184	07/01/03	06/05/03	(G) Methyl styrene acrylonitrile copolymer
P-03-0185	07/01/03	06/05/03	(G) Butadiene styrene polymer
P-03-0235	06/12/03	05/25/03	(G) 2-propenoic acid, 2-methyl-, methyl ester, polymer with alkyl 2-methyl-2-propenoate and alkyl 2-propenoate and ethenylbenzene
P-03-0246	06/24/03	06/18/03	(S) Poly(oxy-1,2-ethanediyl), alpha-hydro-.omega.-hydroxy-, ether with 2,2'-[oxybis(methylene)]bis[2-(hydroxymethyl)-1,3-propanediol] (6:1)
P-03-0248	07/01/03	06/19/03	(G) Glycerol fatty acid ester
P-03-0251	07/08/03	06/17/03	(S) Fatty acids, C18-unsaturated, dimers, polymers with ethylenediamine, 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclol[4.1.0]heptane-3-carboxylate, piperazine, polypropylene glycol diamine and sebacic acid
P-03-0253	06/30/03	06/22/03	(G) Acrylic polyol
P-03-0275	06/03/03	05/08/03	(G) Substituted hydroxyethylcellulose ethers
P-03-0286	07/08/03	06/25/03	(G) Methoxycyclodiene
P-03-0295	06/16/03	06/11/03	(G) Modified hydroxyfunctional acrylic copolymer
P-03-0297	06/25/03	06/13/03	(G) Modified polyolefin
P-03-0300	07/01/03	06/24/03	(G) Halogenated phosphate
P-03-0309	06/23/03	05/28/03	(G) Acrylate ester
P-03-0318	06/30/03	06/10/03	(G) Urethane acrylate polymer, compounds with amine
P-03-0327	06/23/03	06/10/03	(S) 1,2-cyclohexanedicarboxylic acid, dinonyl ester, branched and linear
P-03-0332	07/11/03	06/18/03	(G) Heterocyclic sulfide ester
P-03-0333	06/11/03	05/19/03	(G) Amine salt
P-03-0335	06/16/03	06/04/03	(G) Acrylate and urethane modified polyether
P-03-0359	07/02/03	06/20/03	(G) Modified epoxy acrylate
P-03-0360	06/11/03	05/27/03	(G) Polyester polyurethane dispersion
P-03-0388	07/03/03	06/18/03	(G) Fatty acid amides
P-03-0391	07/02/03	06/23/03	(G) Amine salt of polyurethane resin
P-03-0393	06/20/03	06/16/03	(G) Aliphatic polyamine
P-03-0396	07/03/03	06/10/03	(G) Metal complexes of substituted benensulfulfonic acid derivatives
P-03-0406	07/03/03	06/11/03	(G) Potassium sodium salt of substituted thiazolesulfonic acid
P-92-1449	06/04/03	04/14/03	(G) Disubstituted veeta-naphthol
P-97-0108	06/16/03	05/29/03	(S) Phenol 2,4,6-tris 3-(dimethylaminopropylaminomethyl)phenol
P-98-1077	07/02/03	03/24/03	(G) Substituted polystyrene
P-98-1208	07/10/03	04/28/03	(G) Polyalkyl-substituted-heteromonocycle

List of Subjects

• Environmental protection
• Chemicals
• Premanufacture notices

Dated: July 31, 2003.

Sandra R. Wilkins,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.