2018-17050. Certain Steel Nails From Malaysia: Preliminary Results and Partial Rescission of Antidumping Duty Administrative Review; 2016-2017

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The Department of Commerce (Commerce) is conducting an administrative review of the antidumping duty order on certain steel nails from Malaysia. This review covers the sales of two mandatory respondents, both of which we preliminarily determine to have made sales at less than normal value during the period of review, covering July 1, 2016, through June 30, 2017. In addition, we are rescinding the review in part with respect to 15 companies for which the request for review was timely withdrawn.

DATES:

Applicable August 9, 2018.

FOR FURTHER INFORMATION CONTACT:

Edythe Artman or Madeline Heeren, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone] or [phone], respectively.

SUPPLEMENTARY INFORMATION:

Background

These preliminary results of review are made in accordance with section 751 of the Tariff Act of 1930, as amended (the Act). On September 13, 2017, Commerce published the notice of initiation for the administrative review.^[1] For a complete description of the events that followed the initiation of the review, see the Preliminary Decision Memorandum.^[2] A list of topics included in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov and to all parties in the Central Records Unit, located in room B8094 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at http://enforcement.trade.gov/​frn/​. The signed and the electronic versions of the Preliminary Decision Memorandum are identical in content.

Scope of the Order

The products covered by the scope of the order are certain steel nails from Malaysia. For a complete description of the scope, see Appendix I of this notice.

Partial Rescission of Administrative Review

In the Initiation Notice, we initiated a review of 19 companies. Subsequently, the petitioner, Mid Continent Steel & Wire, Inc., withdrew its request for review of 15 of the companies. No other parties had requested a review of these companies. Thus, in response to the petitioner's timely filed withdrawal request and pursuant to 19 CFR 351.213(d)(1), we are rescinding the administrative review of the following companies: Airlift Trans Oceanic Pvt. Ltd.; Astrotech Steels Private Ltd.; Caribbean International Co. Ltd.; Dahnay Logistics Pvt. Ltd.; Flyjac Logistics Private Ltd.; Full Well Freight (Thailand) Co.; Hecny Transportation; Jinhai Hardware Co. Ltd.; Orient Containers Sdn. Bhd.; Orient Express Container Co., Ltd.; Scanwell Logistics (Malaysia) Sdn Bhd; Shanghai Haoray International Trade Co. Ltd.; Sino Connections Logistics; Tag Fasteners Sdn. Bhd.; and Topocean Consolidation Services.

Methodology

Commerce is conducting this review in accordance with section 751(a)(1)(B) of the Act. For a full description of the methodology underlying the preliminary results, see the Preliminary Decision Memorandum.

Preliminary Results of Review

We preliminarily determine that, for the period July 1, 2016, through June 30, 2017, the following weighted-average dumping margins exist: ^[3]

Producer/exporter	Weighted- average dumping margin (percent)
Inmax Sdn. Bhd. and Inmax Industries Sdn. Bhd	0.00
Region International Co. Ltd. and Region System Sdn. Bhd	1.33

Disclosure and Public Comment

Commerce will disclose to parties to the proceeding any calculations performed in connection with these preliminary results of review within five days after the date of publication of this notice.^[4] Interested parties may submit case briefs no later than seven days after the date on which the last verification report is issued in this administrative review.^[5] Rebuttal briefs, limited to issues raised in the case briefs, may be filed no later than five days after the deadline for filing case briefs.^[6] Parties who submit case or rebuttal briefs in this proceeding are encouraged to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.^[7] Case and rebuttal briefs should be filed using ACCESS.^[8]

Interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance within 30 days of the date of publication of this notice.^[9] Requests should contain: (1) The party's name, address and telephone number; (2) the number of participants; and (3) a list of issues parties intend to discuss. Issues raised in the hearing will be limited to those raised in the respective case and rebuttal briefs. If a request for a hearing is made, Commerce intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a date and time to be determined.^[10] Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.

Unless extended, Commerce intends to issue the final results of this administrative review, which will include the results of our analysis of all issues raised in the case briefs, within 120 days of publication of these preliminary results in the Federal Register, pursuant to section 751(a)(3)(A) of the Act.

Assessment Rates

Upon completion of the administrative review, Commerce shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries covered by this review.^[11] The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for future deposits of estimated duties, where applicable.^[12] We intend to issue instructions to CBP 15 days after the publication date of the final results of this review.

Cash Deposit Requirements

The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Inmax and Region listed above will be equal to the weighted-average dumping margin established in the final results of this administrative review; (2) for previously reviewed or investigated companies not listed above, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding in which they were reviewed; (3) if the exporter is not a firm covered in this review, a prior review, or in the investigation but the producer is, the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the producer of the merchandise; and (4) the cash deposit rate for all other producers or exporters will continue to be the all-others rate of 2.66 percent. These cash deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice also serves as a reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification to Interested Parties

We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act and sections 19 CFR 351.213(h)(1) and 351.221(b)(4).

Dated: August 3, 2018.

Christian Marsh,

Deputy Assistant Secretary for Enforcement and Compliance.

Appendix I—Scope of the Order

The merchandise covered by the antidumping duty order is certain steel nails having a nominal shaft length not exceeding 12 inches.^[13] Certain steel nails include, but are not limited to, nails made from round wire and nails that are cut from flat-rolled steel. Certain steel nails may be of one piece construction or constructed of two or more pieces. Certain steel nails may be produced from any type of steel, and may have any type of surface finish, head type, shank, point type and shaft diameter. Finishes include, but are not limited to, coating in vinyl, zinc (galvanized, including but not limited to electroplating or hot dipping one or more times), phosphate, cement, and paint. Certain steel nails may have one or more surface finishes. Head styles include, but are not limited to, flat, projection, cupped, oval, brad, headless, double, countersunk, and sinker. Shank styles include, but are not limited to, smooth, barbed, screw threaded, ring shank and fluted. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the nail using a tool that engages with the head. Point styles include, but are not limited to, diamond, needle, chisel and blunt or no point. Certain steel nails may be sold in bulk, or they may be collated in any manner using any material.

Excluded from the scope of this order are certain steel nails packaged in combination with one or more non-subject articles, if the total number of nails of all types, in aggregate regardless of size, is less than 25. If packaged in combination with one or more non-subject articles, certain steel nails remain subject merchandise if the total number of nails of all types, in aggregate regardless of size, is equal to or greater than 25, unless otherwise excluded based on the other exclusions below.

Also excluded from the scope are certain steel nails with a nominal shaft length of one inch or less that are (a) a component of an unassembled article, (b) the total number of nails is sixty (60) or less, and (c) the imported unassembled article falls into one of the following eight groupings: (1) Builders' joinery and carpentry of wood that are classifiable as windows, French-windows and their frames; (2) builders' joinery and carpentry of wood that are classifiable as doors and their frames and thresholds; (3) swivel seats with variable height adjustment; (4) seats that are convertible into beds (with the exception of those classifiable as garden seats or camping equipment); (5) seats of cane, osier, bamboo or similar materials; (6) other seats with wooden frames (with the exception of seats of a kind used for aircraft or motor vehicles); (7) furniture (other than seats) of wood (with the exception of i) medical, surgical, dental or veterinary furniture; and ii) barbers' chairs and similar chairs, having rotating as well as both reclining and elevating movements); or (8) furniture (other than seats) of materials other than wood, metal, or plastics (e.g., furniture of cane, osier, bamboo or similar materials). The aforementioned imported unassembled articles are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 9403.89.

Also excluded from the scope of this order are steel nails that meet the specifications of Type I, Style 20 nails as identified in Tables 29 through 33 of ASTM Standard F1667 (2013 revision).

Also excluded from the scope of this order are nails suitable for use in powder-actuated hand tools, whether or not threaded, which are currently classified under HTSUS subheadings 7317.00.20.00 and 7317.00.30.00.

Also excluded from the scope of this order are nails having a case hardness greater than or equal to 50 on the Rockwell Hardness C scale (HRC), a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point, suitable for use in gas-actuated hand tools.

Also excluded from the scope of this order are corrugated nails. A corrugated nail is made up of a small strip of corrugated steel with sharp points on one side.

Also excluded from the scope of this order are thumb tacks, which are currently classified under HTSUS subheading 7317.00.10.00.

Certain steel nails subject to this order are currently classified under HTSUS subheadings 7317.00.55.02, 7317.00.55.03, 7317.00.55.05, 7317.00.55.07, 7317.00.55.08, 7317.00.55.11, 7317.00.55.18, 7317.00.55.19, 7317.00.55.20, 7317.00.55.30, 7317.00.55.40, 7317.00.55.50, 7317.00.55.60, 7317.00.55.70, 7317.00.55.80, 7317.00.55.90, 7317.00.65.30, 7317.00.65.60 and 7317.00.75.00. Certain steel nails subject to this order also may be classified under HTSUS subheadings 7907.00.60.00, 7806.00.80.00, 7318.29.00.00, 8206.00.00.00 or other HTSUS subheadings.

While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this order is dispositive.

Appendix II—List of Topics Discussed in the Preliminary Decision Memorandum

1. Summary

2. Background

3. Scope of the Order

4. Partial Rescission of Administrative Review

5. Collapsing of Affiliated Companies

6. Date of Sale

7. Comparisons to Normal Value

A. Determination of Comparison Method

B. Results of the Differential Pricing Analysis

8. Product Comparisons

9. Export Price

10. Normal Value

A. Home Market Viability as Comparison Market

B. Level of Trade

C. Sales to Affiliates

D. Cost of Production

1. Cost Averaging Methodology

A. Significance of Cost Changes

B. Linkage Between Sales and Cost Information

2. Calculation of COP

3. Test of Comparison Market Sales Prices

4. Results of the Cost of Production Test

E. Calculation of Normal Value Based on Comparison Market Prices

F. Price-to-Constructed Value Comparison

11. Currency Conversion

12. Verification

13. Recommendation

Footnotes

1.  See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 82 FR 42974 (September 13, 2017) (Initiation Notice).

2.  See Memorandum, “Decision Memorandum for Preliminary Results and Partial Rescission of Antidumping Duty Administrative Review: Certain Steel Nails from Malaysia; 2016-2017”, dated concurrently with this notice (Preliminary Decision Memorandum).

3.  Commerce has preliminarily determined to collapse, and treat as a single entity, affiliates Inmax Sdn. Bhd. and Inmax Industries Sdn. Bhd. (collectively, Inmax) and Region International Co. Ltd. and Region System Sdn. Bhd. (collectively Region). For a full discussion of the collapsing criteria, see the company-specific analysis memorandum, dated concurrently with this notice.

4.  See 19 CFR 351.224(b).

5.  See 19 CFR 351.309(c)(1)(ii).

6.  See 19 CFR 351.309(d)(1).

7.  See 19 CFR 351.309(c)(2) and (d)(2).

8.  See 19 CFR 351.303.

9.  See 19 CFR 351.310(c).

10.  See 19 CFR 351.310(d).

11.  See 19 CFR 351.212(b).

12.  See section 751(a)(2)(C) of the Act.

13.  The shaft length of certain steel nails with flat heads or parallel shoulders under the head shall be measured from under the head or shoulder to the tip of the point. The shaft length of all other certain steel nails shall be measured overall.