2024-20315. Airworthiness Directives; Dassault Aviation Airplanes

Document Headings

Document headings vary by document type but may contain the following:

1. the agency or agencies that issued and signed a document
2. the number of the CFR title and the number of each part the document amends, proposes to amend, or is directly related to
3. the agency docket number / agency internal file number
4. the RIN which identifies each regulatory action listed in the Unified Agenda of Federal Regulatory and Deregulatory Actions

See the Document Drafting Handbook for more details.

Department of Transportation

Federal Aviation Administration

1. 14 CFR Part 39
2. [Docket No. FAA-2024-1290; Project Identifier MCAI-2024-00078-T; Amendment 39-22795; AD 2024-15-04]
3. RIN 2120-AA64

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

The FAA is superseding Airworthiness Directive (AD) 2023-22-13, which applied to certain Dassault Aviation Model FALCON 7X airplanes. AD 2023-22-13 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-22-13 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is ( print page 73265) incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective October 15, 2024.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of October 15, 2024.

The Director of the Federal Register approved the incorporation by reference of a certain other publication listed in this AD as of December 29, 2023 (88 FR 82246, November 24, 2023).

ADDRESSES:

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-1290; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For EASA material, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; [e-mail]; website easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.
• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available atregulations.gov under Docket No. FAA-2024-1290.

FOR FURTHER INFORMATION CONTACT:

Tom Rodriguez, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone: [phone]; email: [e-mail].

SUPPLEMENTARY INFORMATION:

Background

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2023-22-13, Amendment 39-22597 (88 FR 82246, November 24, 2023) (AD 2023-22-13), AD 2023-22-13 applied to certain Dassault Aviation Model FALCON 7X airplanes. AD 2023-22-13 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA issued AD 2023-22-13 to address reduced structural integrity and reduced control of the airplane due to the failure of system components. AD 2023-22-13 specifies that accomplishing the revision required by that AD terminates certain requirements of AD 2014-16-23, Amendment 39-17947 (79 FR 52545, September 4, 2014) (AD 2014-16-23). This AD therefore continues to allow that terminating action.

The NPRM published in the Federal Register on May 13, 2024 (89 FR 41361). The NPRM was prompted by AD 2024-0033, dated January 31, 2024, issued by EASA, which is the Technical Agent for the Member States of the European Union, (EASA AD 2024-0033) (also referred to as the MCAI). The MCAI states that new or more restrictive airworthiness limitations have been developed.

In the NPRM, the FAA proposed to continue to require certain actions in AD 2023-22-13 and to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in EASA AD 2024-0033. The FAA is issuing this AD to address reduced structural integrity and reduced control of the airplane due to the failure of system components.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2024-1290.

Discussion of Final Airworthiness Directive

Comments

The FAA received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Related Material Under 1 CFR Part 51

The FAA reviewed EASA AD 2024-0033. This material specifies new or more restrictive airworthiness limitations for airplane structures and safe life limits.

This AD also requires EASA AD 2023-0063, dated March 20, 2023, which the Director of the Federal Register approved for incorporation by reference as of December 29, 2023 (88 FR 82246, November 24, 2023).

This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

The FAA estimates that this AD affects 134 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

The FAA estimates the total cost per operator for the retained actions from AD 2023-22-13 to be $7,650 (90 work-hours × $85 per work-hour).

The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate.

The FAA estimates the total cost per operator for the new actions to be $7,650 (90 work-hours × $85 per work-hour).

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national ( print page 73266) government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by:

a. Removing Airworthiness Directive (AD) 2023-22-13, Amendment 39-22597 ( 88 FR 82246, November 24, 2023); and

b. Adding the following new AD:

2024-15-04 Dassault Aviation: Amendment 39-22795; Docket No. FAA-2024-1290; Project Identifier MCAI-2024-00078-T.

(a) Effective Date

This airworthiness directive (AD) is effective October 15, 2024.

(b) Affected ADs

(1) This AD replaces AD 2023-22-13, Amendment 39-22597 (88 FR 82246, November 24, 2023) (AD 2023-22-13).

(2) This AD affects AD 2014-16-23, Amendment 39-17947 (79 FR 52545, September 4, 2014) (AD 2014-16-23).

(c) Applicability

This AD applies to Dassault Aviation Model FALCON 7X airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before September 7, 2023.

Note 1 to paragraph (c): Model FALCON 7X airplanes with modification M1000 incorporated are commonly referred to as “Model FALCON 8X” airplanes as a marketing designation.

(d) Subject

Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks.

(e) Unsafe Condition

This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address reduced structural integrity and reduced control of the airplane due to the failure of system components.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Retained Revision of the Existing Maintenance or Inspection Program, With a New Terminating Action

This paragraph restates the requirements of paragraph (j) of AD 2023-22-13, with a new terminating action. For airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before September 7, 2022, except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2023-0063, dated March 20, 2023 (EASA AD 2023-0063). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (j) of this AD terminates the requirements of this paragraph.

(h) Retained Exceptions to EASA AD 2023-0063, With No Changes

This paragraph restates the exceptions specified in paragraph (k) of AD 2023-22-13, with no changes.

(1) This AD does not adopt the requirements specified in paragraphs (1) and (2) of EASA AD 2023-0063.

(2) Paragraph (3) of EASA AD 2023-0063 specifies revising “the approved AMP [aircraft maintenance program]” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after December 29, 2023 (the effective date of AD 2023-22-13).

(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2023-0063 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2023-0063, or within 90 days after December 29, 2023 (the effective date of AD 2023-22-13), whichever occurs later.

(4) This AD does not adopt the provisions specified in paragraphs (4) and (5) of EASA AD 2023-0063.

(5) This AD does not adopt the “Remarks” section of EASA AD 2023-0063.

(i) Retained Restrictions on Alternative Actions, Intervals, and Critical Design Configuration Control Limitations (CDCCLs), With a New Exception

This paragraph restates the requirements of paragraph (l) of AD 2023-22-13, with a new exception. Except as required by paragraph (j) of this AD, after the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions ( e.g., inspections), intervals, or CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2023-0063.

(j) New Revision of the Existing Maintenance or Inspection Program

Except as specified in paragraph (k) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2024-0033, dated January 31, 2024 (EASA AD 2024-0033). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.

(k) Exceptions to EASA AD 2024-0033

(1) This AD does not adopt the requirements specified in paragraphs (1) and (2) of EASA AD 2024-0033.

(2) Paragraph (3) of EASA AD 2024-0033 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.

(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2024-0033 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2024-0033, or within 90 days after the effective date of this AD, whichever occurs later.

(4) This AD does not adopt the provisions specified in paragraphs (4) and (5) of EASA AD 2024-0033.

(5) This AD does not adopt the “Remarks” section of EASA AD 2024-0033.

(l) New Provisions for Alternative Actions, Intervals, and CDCCLs

After the existing maintenance or inspection program has been revised as required by paragraph (j) of this AD, no alternative actions ( e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2024-0033.

(m) Terminating Action for Certain Requirements in AD 2014-16-23

Accomplishing the actions required by paragraphs (g) or (j) of this AD terminates the requirements of paragraph (q) of AD 2014-16-23.

(n) Additional AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the International Validation Branch, send ( print page 73267) it to the attention of the person identified in paragraph (o) of this AD. Information may be emailed to: [e-mail]. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Dassault Aviation's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(o) Additional Information

For more information about this AD, contact Tom Rodriguez, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone [phone]; email: [e-mail].

(p) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this material as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(3) The following material was approved for IBR on October 15, 2024.

(i) European Union Aviation Safety Agency (EASA) AD 2024-0033, dated January 31, 2024.

(ii) [Reserved]

(4) The following material was approved for IBR on December 29, 2023 (88 FR 82246, November 24, 2023).

(i) European Union Aviation Safety Agency (EASA) AD 2023-0063, dated March 20, 2023.

(ii) [Reserved]

(5) For EASA ADs 2024-0033 and 2023-0063, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; website easa.europa.eu. You may find these EASA ADs on the EASA website at ad.easa.europa.eu.

(6) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(7) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/​federal-register/​cfr/​ibr-locations or email [e-mail].

Issued on July 16, 2024.

James D. Foltz,

Deputy Director, Compliance & Airworthiness Division, Aircraft Certification Service.