[Federal Register Volume 60, Number 179 (Friday, September 15, 1995)]
[Notices]
[Pages 47943-47944]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-22956]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[FRL-5295-8]
Clean Water Act; Contractor Access to Confidential Business
Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice of intended transfer of confidential business
information to contractors.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency (EPA) intends to transfer
to EPA contractors and subcontractors, technical and financial
confidential business information (CBI) collected from several metals
forming, finishing, and fabricating industries including the metal
products and machinery manufacturing, maintenance and rebuilding
industry. Transfer of the information will allow the contractors and
subcontractors to assist EPA in
[[Page 47944]]
developing effluent limitations guidelines and standards under the
Clean Water Act (CWA) for the metal products and machinery industry.
The information being transferred was collected under the authority of
Section 308 of the Clean Water Act. Interested persons may submit
comments on this intended transfer of information to the address noted
below.
DATES: Comments on the transfer of data are due September 25, 1995.
ADDRESSES: Comments may be sent to Mark Ingle, Engineering and Analysis
Division (4303), Environmental Protection Agency, Washington, D.C.
20460.
FOR FURTHER INFORMATION CONTACT: Mark Ingle at the above address or at
(202) 260-7191.
SUPPLEMENTARY INFORMATION: EPA has previously transferred to its
contractor Radian Corporation of Herndon, Virginia (and subcontractors)
information, including confidential business information (CBI),
concerning the metal products and machinery industry collected under
the authority of the Clean Water Act, Section 308.
The information transferred included: Questionnaire data collected
during a two phase survey of the metal products industry; the first
phase consisted of the screener questionnaire or the Mini-Data
Collection Portfolio (MDCP) which was conducted in 1990 (OMB No. 2040-
0148); the second phase was a more detailed questionnaire or Data
Collection Portfolio (DCP) that was sent in 1991 to a randomly selected
sample identified through the responses to the (OMB No. 2040-0148). EPA
also transferred site visit and field sampling data collected during
1990 through 1993. In addition, Radian has received similar records and
data developed in support of the following effluent guidelines
regulations:
Porcelain Enameling (data collection 1977 through 1979),
Coil Coating (data collection 1977 through 1979),
Aluminum Forming (data collection 1978 through 1981),
Battery Manufacturing (data collection 1978 through 1983),
Copper Forming (data collection 1978 through 1979),
Electroplating (data collection 1974 through 1979),
Metal Finishing (data collection 1974 through 1979),
Metal Molding and Casting (data collection 1977 through
1983),
Nonferrous Metals Forming and Metal Powders (data
collection 1983 through 1985),
Nonferrous Metals Manufacturing, Phases I and II (data
collection 1978 through 1985),
Plastics Molding and Forming (data collection 1980 through
1987), and
Hot Dip Coating Subcategory of the Iron and Steel
regulation (data collection 1986).
Radian has also received files gathered during studies of the beryllium
copper forming industry (data collection during 1986), the platemaking
industry (data collection during 1984), and the printing and publishing
industry (data collection 1977 through 1979). EPA determined that this
transfer was necessary to enable the contractor and subcontractors to
perform their work under EPA Contract No. 68-C4-0024 and related
subcontracts by assisting EPA in developing effluent limitations
guidelines and standards for the metal products and machinery industry.
Notice to this effect was provided to the affected companies at the
time the data was collected or through Federal Register notice.
Today, EPA is giving notice that it has entered into a new
contract, Contract No. 68-C5-0005 with Radian Corporation of Herndon,
VA and Radian Corp. has entered into additional contracts with its
subcontractors: Westat, Inc. of Rockville, MD; CAI Engineering of
Oakton, VA; GeoLogics Corp. of Bethesda, MD; TN Associates of
Milwaukee, WI; Tetra Tech of Fairfax, VA; and VIGYAN Corp. of Vienna,
VA. to develop effluent limitations guidelines and standards for the
metal products and machinery phase II industry. The effective date of
the new contract was June 5, 1995. Radian Corp. will provide technical
support such as completion of the public docket for the proposed
rulemaking and completion of the work on the draft proposed technical
development document. The contractor shall also provide support on post
proposal efforts, including assisting with public meetings, responding
to comments, filling data gaps that arise through comments on the
proposed rule, and assisting with the assembly of the rulemaking record
for the final rule.
The subcontractors will assist the prime by providing specific
expertise. Westat, Inc. will assist with any surveys that may be
required in future work, data management and statistical analysis. CAI
Engineering provides metal products industrial wastewater and hazardous
waste engineering expertise, surface treatment process design and
pollution prevention expertise, and wastewater treatment system design
expertise. GeoLogics Corp. provides data entry and clerical services.
TN Associates provides experience in the design and management of
wastewater treatment systems. Tetra Tech provides capabilities in risk
management and public outreach. VIGYAN Corp. provides services related
to database development and management.
In accordance with 40 CFR part 2, subpart B, the previously
collected information described above (including confidential business
information) will be transferred to Radian Corp. EPA has determined
that this transfer is necessary to enable the contractor to perform
their work under EPA Contract No. 68-C5-0005.
The metal products and machinery manufacturing, rebuilding and
maintenance industry financial and economic data that were collected
through the DCP survey in 1991 (OMB No. 2040-0148) will be transferred
to Abt Associates under Contract No. 68-C4-0060. In accordance with 40
CFR part 2, subpart B, the previously collected information described
above (including confidential business information) will be transferred
to ERG, Contract No. 68-C3-0302. ERG has subcontracted with Abt
Associates to conduct the economic analysis for the metal products and
machinery industry. EPA has determined that this transfer is necessary
to enable the contractor to perform their work under EPA contract No.
68-C3-0302.
Anyone wishing to comment on the above matters must submit comments
to the address given above by September 25, 1995.
Dated: September 6, 1995.
Tudor T. Davies,
Director, Office of Science and Technology.
[FR Doc. 95-22956 Filed 9-14-95; 8:45 am]
BILLING CODE 6560-50-P
