2019-20019. MET Laboratories, Inc.: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards  

  • Start Preamble

    AGENCY:

    Occupational Safety and Health Administration (OSHA), Labor.

    ACTION:

    Notice.

    SUMMARY:

    In this notice, OSHA announces the final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.

    DATES:

    The expansion of the scope of recognition becomes effective on September 17, 2019.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Information regarding this notice is available from the following sources:

    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone: (202) 693-1999; email: meilinger.francis2@dol.gov.

    General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone: (202) 693-2110; email: robinson.kevin@dol.gov. OSHA's web page includes information about the NRTL Program (see http://www.osha.gov/​dts/​otpca/​nrtl/​index.html).

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Notice of Final Decision

    OSHA hereby gives notice of the expansion of the scope of recognition of MET Laboratories, Inc. (MET), as a NRTL. MET's expansion covers the addition of one test standard to its scope of recognition. Additionally, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.

    OSHA recognition of a NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

    The agency processes applications by a NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding and, in the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL that details the scope of recognition. These pages are available from the agency's website at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

    MET submitted an application, dated November 8, 2016 (OSHA-2006-0028-0041), to expand its recognition to include four additional test standards. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

    OSHA previously published a Federal Register notice (83 FR 5813) on February 9, 2018, announcing this application, but referenced one of the four standards as being recognized by OSHA when that standard is not currently included in the NRTL Program's List of Appropriate Test Standards. OSHA further published a Federal Register notice (83 FR 22291) granting recognition for three of the four additional standards requested in the application. This notice corrects the error in the previous Federal Register notice for the one remaining standard.

    OSHA published the preliminary notice announcing MET's expansion application and proposed addition to the NRTL List of Appropriate Test Standards in the Federal Register on March 12, 2019 (84 FR 8900). The agency requested comments by March 27, 2019, and it received one comment (OSHA-2006-0028-0053) in response to this notice. This comment did not require a response from the agency. OSHA now is proceeding with this final notice to grant expansion of MET's scope of recognition.

    To obtain or review copies of all public documents pertaining to MET's application, go to http://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW, Room N-3653, Washington, DC 20210. Docket No. OSHA-2006-0028 contains all materials in the record concerning MET's recognition.

    II. Final Decision and Order

    OSHA staff examined MET's expansion application, the capability to meet the requirements of the test standards, and other pertinent information. Based on a review of this evidence, OSHA finds that MET meets the requirements of 29 CFR 1910.7 for expansion of the recognition, subject to the specified limitation and conditions listed. OSHA, therefore, is proceeding with this final notice to grant expansion of MET's scope of recognition. OSHA limits the expansion of MET's scope of recognition to testing and certification of products for demonstration of conformance to the test standard listed in Table 1.Start Printed Page 48948

    Table 1—List of Appropriate Test Standard for Inclusion in MET's NRTL Scope of Recognition

    Test standardTest standard title
    UL 61010-2-020Safety Requirements for Electrical Equipment Measurement, Control and Laboratory Use—Part 2-020: Particular Requirements for Laboratory Centrifuges.

    In this notice, OSHA also announces the addition of a new test standard to the NRTL Program's List of Appropriate Test Standards. Table 2, below, lists the test standard that is new to the NRTL Program. OSHA has determined that this test standard is an appropriate test standard and will include it in the NRTL Program's List of Appropriate Test Standards.

    Table 2—Test Standard OSHA Is Adding to the NRTL Program's List of Appropriate Test Standards

    Test standardTest standard title
    UL 61010-2-020Safety Requirements for Electrical Equipment Measurement, Control and Laboratory Use—Part 2-020: Particular Requirements for Laboratory Centrifuges.

    OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.

    The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, the designation of the standards-developing organization for the standard as opposed to the ANSI designation may be used. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

    A. Conditions

    In addition to those conditions already required by 29 CFR 1910.7, MET must abide by the following conditions of the recognition:

    1. MET must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in the operations as a NRTL, and provide details of the change(s);

    2. MET must meet all the terms of the recognition and comply with all OSHA policies pertaining to this recognition; and

    3. MET must continue to meet the requirements for recognition, including all previously published conditions on MET's scope of recognition, in all areas for which it has recognition.

    Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of MET, subject to the limitation and conditions specified above. OSHA also adds one new test standard to the NRTL Program's List of Appropriate Test Standards.

    III. Authority and Signature

    Loren Sweatt, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

    Start Signature

    Signed at Washington, DC, on September 11, 2019.

    Loren Sweatt,

    Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health.

    End Signature End Supplemental Information

    [FR Doc. 2019-20019 Filed 9-16-19; 8:45 am]

    BILLING CODE 4510-26-P