03-23816. Airworthiness Directives; Turbomeca Arriel 1 Series Turboshaft Engines; Correction

AGENCY:

Federal Aviation Administration, DOT.

ACTION:

Final rule; correction.

SUMMARY:

This document makes a correction to Airworthiness Directive (AD) 2003-16-03 applicable to Turbomeca Arriel 1 Series turboshaft engines that was published in the Federal Register on August 8, 2003 (68 FR 47208). Turbomeca Arriel turboshaft engine 1 C1 was omitted from the Applicability. This document corrects that omission. In all other respects, the original document remains the same.

EFFECTIVE DATE:

Effective September 18, 2003.

FOR FURTHER INFORMATION CONTACT:

Antonio Cancelliere, Aerospace Engineer, Engine Certification Office, FAA, Engine and Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803-5299; telephone [phone]; fax [phone].

SUPPLEMENTARY INFORMATION:

A final rule AD, FR Doc. 03-19836, applicable to Turbomeca Arriel 1 Series turboshaft engines, was published in the Federal Register on August 8, 2003 (68 FR 47208). The following correction is needed:

PART 39—AIRWORTHINESS DIRECTIVES

§ 39.13

[Corrected]

On page 47209, in the third column, in the Applicability Section, the first sentence “This airworthiness directive (AD) applies to Turbomeca turboshaft engine models Arriel 1 A, 1 A1, 1 A2, 1 B, 1 C, 1 C2, 1 D, 1 D1, 1 E2, 1 K, 1 K1, 1 S, and 1 S1 that have not incorporated modification TU 202” is corrected to read, “This airworthiness directive (AD) applies to Turbomeca turboshaft engine models Arriel 1 A, 1 A1, 1 A2, 1 B, 1 C, 1 C1, 1 C2, 1 D, 1 D1, 1 E2, 1 K, 1 K1, 1 S, and 1 S1 that have not incorporated modification TU 202”.

Issued in Burlington, MA, on September 11, 2003.

Francis A. Favara,

Assistant Manager, Engine and Propeller Directorate, Aircraft Certification Service.