2011-23973. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from July 1, 2011 to August 26, 2011, and provides the required notice and status report, consists of the PMNs and TMEs, both pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before October 21, 2011.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2011-0768, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov,, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov Web site is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov,, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; fax number: [phone]; e-mail address: [e-mail].

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA taking this action?

EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/​opptintr/​newchems/​pubs/​inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/​opt/​newchems.

Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from July 1, 2011 to August 26, 2011, consists of the PMNs and TMEs, both pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Reports

In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.

Table I—131 PMNs Received From July 1, 2011 to August 26, 2011

Case No.	Received date	Projected notice end date	Manufacturer/importer	Use	Chemical
P-11-0478	7/1/2011	9/28/2011	CBI	(S) Textile wet processing enhancer	(G) Amino-modified polyalkyleneoxide silicone copolymer.
P-11-0479	7/1/2011	9/28/2011	CBI	(S) Intermediate for rubber processing additives	(G) Vinylalkoxysilane.
P-11-0480	7/1/2011	9/28/2011	CBI	(G) Processing additive intermediate	(G) Mercaptoalkoxysilane.
P-11-0481	7/6/2011	10/3/2011	Ferro Corporation	(G) Additive for polymers	(S) 1,2-cyclohexanedicarboxylic acid, 1-butyl 2-(phenylmethyl) ester.
P-11-0482	7/8/2011	10/5/2011	CBI	(G) Specialty additive	(G) Carbon nanotubes.
P-11-0483	7/8/2011	10/5/2011	CBI	(G) Chemical intermediate	(G) Alkyl thiol.
P-11-0484	7/8/2011	10/5/2011	CBI	(G) Surfactant	(G) Alkyl sulfate salt.
P-11-0485	7/8/2011	10/5/2011	CBI	(G) Hardener for industrial coatings	(G) Polyoxyalkylene ether, polymer with aliphatic diisocyanate, homopolymer, alkanol-blocked.
P-11-0486	7/8/2011	10/5/2011	Asahi Kasei America, Inc	(G) Hardener for industrial coatings	(G) Alkyl substituted alkanediol polymer with aliphatic and alicyclic diisocyanates.
P-11-0487	7/8/2011	10/5/2011	CBI	(G) Surfactant	(G) Alkyl polyamide.
P-11-0488	7/8/2011	10/5/2011	CBI	(G) Hardener for industrial coatings	(G) Aliphatic diisocyanate, homopolymer, alkanol-blocked.
P-11-0489	7/8/2011	10/5/2011	CBI	(G) Hardener for industrial coatings	(G) Aliphatic diisocyanate polymer with alkanediol and alkylglycol.
P-11-0490	7/8/2011	10/5/2011	Sasol North America	(S) Anti-graying agent in fabric washes	(S) 1,4-benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,2-ethanediol and 1,2,3-propanetriol, ester with .alpha.-methyl-.omega.-hydroxypoly(oxy-1,2-ethanediyl).
P-11-0491	7/8/2011	10/5/2011	Sasol North America	(S) Anti-graying agent in fabric washes	(S) 1,4-benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,2-propanediol, ester with .alpha.-methyl-.omega.-hydroxypoly(oxy-1,2-ethanediyl).
P-11-0492	7/8/2011	10/5/2011	CBI	(G) Raw material	(G) Glycine derivative.
P-11-0493	7/5/2011	10/2/2011	CBI	(G) Chelating agent for hydrogen sulfide removal	(G) Aminocarboxylic acid iron chelate complex.
P-11-0494	7/5/2011	10/2/2011	CBI	(G) Chelating agent for hydrogen sulfide removal	(G) Aminocarboxylic acid iron chelate complex.
P-11-0495	7/5/2011	10/2/2011	CBI	(G) Chelating agent for hydrogen sulfide removal	(G) Aminocarboxylic acid iron chelate complex.
P-11-0496	7/5/2011	10/2/2011	CBI	(G) Chelating agent for hydrogen sulfide removal	(G) Aminocarboxylic acid iron chelate complex.
P-11-0497	7/5/2011	10/2/2011	CBI	(G) Chelating agent for hydrogen sulfide removal	(G) Aminocarboxylic acid iron chelate complex.
P-11-0498	7/12/2011	10/9/2011	GE Water & Process Technologies	(S) Heavy metal precipitant for wastewater	(G) Sodium polyethylenimine dithiocarbamate, polymeric dithiocarbamate.
P-11-0499	7/12/2011	10/9/2011	Sika Corporation	(G) Water soluable polyamine curing agent for epoxy coatings	(S) Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine, n1,n2-bis(2-aminoethyl)-1,2-ethanediamine, 2-(chloromethyl) oxirane, .alpha.-hydro-.omega.-hydroxypoly[oxy(methyl-1,2-ethanediyl)], 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] and .alpha.-(2-oxiranylmethyl)-.omega.-(2-oxiranylmethoxy)poly[oxy(methyl-1,2-ethanediyl)], reaction products with 2-[[4-(1,1-dimethylethyl)phenoxy]methyl]oxirane, acetates (salts).
P-11-0500	7/12/2011	10/9/2011	CBI	(G) Processing additive	(G) Polysulfide silane.
P-11-0501	7/1/2011	9/28/2011	CBI	(G) Adhesive	(G) Alkyldioic acid, polymer with alkyl acrylate, alkenearomatic, alkyldiol, hydroxyalkyl methacrylate, aromatic isocyanate, alkyl methacrylate and acrylic acid.
P-11-0502	7/14/2011	10/11/2011	CBI	(G) Acrylic pressure sensitive adhesive	(G) Acrylic solution polymer.
P-11-0503	7/15/2011	10/12/2011	CBI	(G) Pigment formulation additive	(G) Siloxanes and silicones, 3-aminoalkyl, hydroxy terminated.
P-11-0504	7/13/2011	10/10/2011	CBI	(S) Binder for ultra violet curable coatings	(G) Ultra violet curable polyurethane acrylate.
P-11-0505	7/14/2011	10/11/2011	CBI	(S) Polymer for can coatings	(G) Polyester polymer.
P-11-0506	7/14/2011	10/11/2011	CBI	(G) Polymer backbone for further processing	(G) Polyaminoamide.
P-11-0507	7/14/2011	10/11/2011	CBI	(S) Wastewater heavy metals removal	(G) Polymeric sulfide.
P-11-0508	7/18/2011	10/15/2011	Dow Chemical Company	(G) Inert ingredient	(G) Acrylic polymer.
P-11-0509	7/18/2011	10/15/2011	CBI	(S) Wire & cable insulation; film; injection molding	(G) Etfe, ethylene-tetrafluoroethylene copolymer.
P-11-0510	7/18/2011	10/15/2011	IGM Resins Inc	(G) Ultra violet initiator	(S) Poly(oxy-1,2-ethanediyl), .alpha.-[4-(dimethylamino)benzoyl]-, .omega.-[[4-(dimethylamino)benzoyl]oxy]- (ca index name).
P-11-0511	7/18/2011	10/15/2011	CBI	(G) Petroleum substitute base	(G) C15 olefins.
P-11-0512	7/18/2011	10/15/2011	CBI	(G) Petroleum substitutes	(G) C15 paraffinic hydrocarbon.
P-11-0513	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoolefinic hydrocarbons.
P-11-0514	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoolefinic hydrocarbons.
P-11-0515	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoolefinic hydrocarbons.
P-11-0516	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0517	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0518	7/18/2011	10/15/2011	CBI	(G) Intermediate petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0519	7/18/2011	10/15/2011	CBI	(G) Petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0520	7/18/2011	10/15/2011	CBI	(G) Petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0521	7/18/2011	10/15/2011	CBI	(G) Petroleum substitutes	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0522	7/18/2011	10/15/2011	CBI	(G) Petroleum substitute	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0523	7/18/2011	10/15/2011	CBI	(G) Petroleum substitute	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0524	7/18/2011	10/15/2011	CBI	(G) Petroleum substitute	(G) Highly branched isoparaffinic hydrocarbons.
P-11-0525	7/19/2011	10/16/2011	CBI	(G) Material for semi-conductor	(G) Oxibiscarbomonocyclic acid, polymer wth oxibis[heteropolycyclic ketone], (alkyl(c-1-5)substituted) bis [alkane(c-2-6)amine],[halo(haloalkyl(c-1-5))alkylidene]bis[aminocarbomonocyclic alcohol] and [[halo(haloalkyl(c-1-5))alkylidene]]bis(hydroxycarbomonocycle)]bis[aminobenzamide].
P-11-0526	7/19/2011	10/16/2011	CBI	(G) Surface active agent	(G) Amphoteric fluorinated surfactant.
P-11-0527	7/20/2011	10/17/2011	CBI	(G) Chemical intermediate	(G) Substituted fluoroalkane.
P-11-0528	7/20/2011	10/17/2011	CBI	(G) Chemical intermediate	(G) Fluorinated thiol.
P-11-0529	7/20/2011	10/17/2011	CBI	(G) Chemical intermediate	(G) Fluorinated monomer.
P-11-0530	7/20/2011	10/17/2011	CBI	(G) Surfactant	(G) Fluoropolyacrylamide.
P-11-0531	7/20/2011	10/17/2011	CBI	(S) Dye intermediate	(G) Diazo substituted copper salt.
P-11-0532	7/20/2011	10/17/2011	CBI	(G) Chemical intermediate	(G) Polyfluoroalkyl amine.
P-11-0533	7/20/2011	10/17/2011	CBI	(G) Surfactant	(G) Non-ionic fluorosurfactant.
P-11-0534	7/20/2011	10/17/2011	CBI	(G) Surfactant	(G) Anioinic fluorosurfactant.
P-11-0535	7/21/2011	10/18/2011	CBI	(S) Leather processing waterproofing agent	(G) Carboxy functional polydimethylsiloxane.
P-11-0536	7/21/2011	10/18/2011	CBI	(S) Leather processing waterproofing agent	(G) Modified aminosiloxane.
P-11-0537	7/22/2011	10/19/2011	CBI	(G) Colourant	(G) Pyrazole azo thiadiazole derivative.
P-11-0538	7/22/2011	10/19/2011	H.B. Fuller Company	(G) Industrial adhesive	(G) Mixture of: acrylic polymer with polymerized organic acid, potassium salt and organic acid, potassium salt.
P-11-0539	7/22/2011	10/19/2011	H.B. Fuller Company	(G) Industrial adhesive	(G) Mixture of: acrylic polymer with polymerized organic acid, compd. with 2-aminoethanol and organic acid, 2-aminoethanol salt.
P-11-0540	7/22/2011	10/19/2011	H.B. Fuller Company	(G) Industrial adhesive	(G) Mixture of: acrylic polymer with polymerized organic acid, ammonium salt and organic acid, ammonium salt.
P-11-0541	7/22/2011	10/19/2011	H.B. Fuller Company	(G) Industrial adhesive	(G) Mixture of: acrylic polymer with polymerized organic acid, sodium salt and organic acid, sodium salt.
P-11-0542	7/22/2011	10/19/2011	H.B. Fuller Company	(G) Industrial adhesive	(G) Mixture of: acrylic polymer with polymerized organic acid, potassium salt and organic acid, potassium salt.
P-11-0543	7/26/2011	10/23/2011	CBI	(G) Surfactant	(G) Polyfluorinated alkyl quaternary amine chloride.
P-11-0544	7/27/2011	10/24/2011	CBI	(G) Colourant	(G) Diazopyridine derivative.
P-11-0545	7/28/2011	10/25/2011	CBI	(G) Chemical intermediate	(G) Substituted hydrogen phosphite.
P-11-0546	7/27/2011	10/24/2011	Chemetall Foote Corporation	(S) Brazing (metal joining) agent	(S) Silicate (2-) hexafluoro-cesium.
P-11-0547	7/27/2011	10/24/2011	ICL-IP America Inc	(G) The final formulation is a halogen-free flame retardant pmn that will be coated on the surface of composite or textile surface	(G) Phosphoric acid, inorganic salt.
P-11-0548	7/28/2011	10/25/2011	Advanced polymer technology	(G) Polymer crosslinking agent	(S) Imidodicarbonic diamide, n,n-dibutyl-n′,2-bis[4-[(4-isocyanatophenyl)methyl]phenyl]-.
P-11-0549	8/1/2011	10/29/2011	CBI	(G) Heat transfer fluid	(S) 2-butene, 1,1,1,4,4,4-hexafluoro-, (2z)-.
P-11-0550	8/2/2011	10/30/2011	Sika Corporation	(G) Used as an emulsifier in a hardener of a waterborne 2 part epoxy system	(G) N-coco alkyltrimethylene0-, polymers with bisphenol a, epichlorohydrin and amodified aliphatic amine.
P-11-0551	8/2/2011	10/30/2011	Sika Corporation	(G) Used as an emulsifier in a hardener of a waterborne 2 part epoxy system	(G) N-coco alkyltrimethylenedi-, polymer with bisphenol a, epichlorohydrin and modified aliphatic amine.
P-11-0552	8/1/2011	10/29/2011	CBI	(G) Productivity aid in the paper industry	(G) Polyaminoamide, sulfate salt.
P-11-0553	8/2/2011	10/30/2011	CBI	(G) Coatings	(G) Urethane acrylate.
P-11-0554	8/2/2011	10/30/2011	CBI	(G) Fuel blending component	(G) Petroleum distillate lights.
P-11-0555	8/2/2011	10/30/2011	CBI	(G) Coating agent	(G) 2-propenoic acid, 2-methyl-1,1-dimethylethyl ester, polymer with 2,2-dimethyl-1,3-propanediol, ethenylbenzene, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, cycloaliphatic dicarboxylic anhydride and 1,2-propanediol mono(2-methyl-2-propenoate), bis(1,1-dimethylpropyl)peroxide-initiated.
P-11-0556	8/2/2011	10/30/2011	CBI	(G) Coating agent	(G) 2-propenoic acid, 2-methyl-, polymer with 2,2-dimethyl-1,3-propanediol, ethenylbenzene, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, cycloaliphatic dicarboxylic anhydride, 2-hydroxyethyl 2-methyl-2-propenoate, methyl 2-methyl-2-propenoate and 2-methylpropyl 2-methyl-2-propenoate, 2-hydroxy-3-[(1-oxoneodecy]- oxy]propyl ester.
P-11-0557	8/3/2011	10/31/2011	CBI	(G) Water and oil repellant	(G) 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester, telomers with c18-26 alkyl acrylate, 1-dodecanthiol, n-(hydroxymethyl)-2-methyl-2-propenamide, polyfluorooctyl methacrylate and vinylidene chloride, 2,2′-[1,2-diazenediylbis(1-methylethylidene)]-bis[4,5-dihydro-1h-imidazole]hydrochloride (1:2)-initiated.
P-11-0558	8/3/2011	10/31/2011	CBI	(G) Component of cleaning agent used in electronic applications.	(S) D-glucitol, 1,2,3,4,5,6-hexakis-o-[3-(hydroxyamino)-3-iminopropyl]-.
P-11-0559	8/4/2011	11/1/2011	CBI	(G) Releasing agent	(G) Polyglycerol fatty acid ester.
P-11-0560	8/4/2011	11/1/2011	Moresco USA Inc	(S) Additive-grease for bearings	(G) Alkylated diphenyl ethers.
P-11-0561	8/4/2011	11/1/2011	CBI	(S) Automotive fuel hose; semi conductor/chemical tubing	(G) Tetrafluoroethylene chlorotrifluoroethylene copolymer.
P-11-0562	8/8/2011	11/5/2011	Ask chemicals L.P	(G) Import only	(G) Vegetable oil, modified.
P-11-0563	8/8/2011	11/5/2011	Ask chemicals L.P	(G) Import only	(G) Vegetable oil, modified.
P-11-0564	8/8/2011	11/5/2011	Colonial Chemical, Inc	(S) Hard surface cleaner	(S) D-glucopyranose, oligomeric, c10-16-alkyl decyl octyl glycosides, 3-[(carboxymethyl)bis(2-hydroxyethyl)ammonio]-2-hydroxypropyl ethers, inner salts, polymers with 1,3-dichloro-2-propanol.
P-11-0565	8/8/2011	11/5/2011	Colonial Chemical, Inc	(S) Hard surface cleaner	(S) D-glucopyranose, oligomeric, c10-16-alkyl glycosides, 3-[(carboxymethyl)bis(2-hydroxyethyl)ammonio]-2-hydroxypropyl ethers, inner salts, polymers with 1,3-dichloro-2-propanol.
P-11-0566	8/8/2011	11/5/2011	CBI	(G) Component of an industrial coating	(G) Cycloaliphatic polyacid functional polyester.
P-11-0567	8/8/2011	11/5/2011	CBI	(G) Manufacturing of elastomer containing items	(G) Fluoropolymer.
P-11-0568	8/8/2011	11/5/2011	CBI	(G) Film, wire and cable	(G) Fluoropolymer.
P-11-0569	8/8/2011	11/5/2011	CBI	(G) Manufacturing of elastomer containing items	(G) Fluoropolymer.
P-11-0570	8/8/2011	11/5/2011	CBI	(G) Industrial lubricant	(G) Polypentaerythritol, mixed esters with mono carboxylic acids.
P-11-0571	8/10/2011	11/7/2011	3M Company	(G) Intermediate	(G) Aryloxy dialkanol.
P-11-0572	8/11/2011	11/8/2011	Henkel Corporation	(S) An adhesive used for panel lamination and other assemblies	(S) 1,4-cyclohexanedimethanol, polymer with 2-hydroxymethylethyl-terminated polybutadiene and 1,1′-methylenebis[4-isocyanatobenzene], c14 alcs.-blocked.
P-11-0573	8/11/2011	11/8/2011	CBI	(G) For use as an exterior can coating	(G) Acrylic latex resin.
P-11-0574	8/11/2011	11/8/2011	CBI	(G) For use as an exterior can coating	(G) Acrylic latex resin.
P-11-0575	8/11/2011	11/8/2011	CBI	(G) For use as an exterior paper coating	(G) Fatty acid modified pet.
P-11-0576	8/11/2011	11/8/2011	CBI	(G) For use as an exterior paper coating	(G) Fatty acid modified pet.
P-11-0577	8/12/2011	11/9/2011	International flavors & Fragrances, Inc	(S) Fragrance ingredient	(S) Butanoic acid, 3-mercapto-, ethyl ester.
P-11-0578	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Intermediate	(S) Benzoic acid, 4-(1,1-dimethylethyl)-, hydrazide.
P-11-0579	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Intermediate	(S) 1h-1,2,4-triazole-3-acetic acid, 5-[4-(1,1-dimethylethyl)phenyl]-.
P-11-0580	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Intermediate	(S) Cyclohexanol, 2,6-bis(1,1-dimethylethyl)-4-methyl-.
P-11-0581	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Intermediate in the manufacture of an imaging chemical	(S) 1h-1,2,4-triazole-5-acetic acid, 1-acetyl-3-[4-(1,1,-dimethylethyl)phenyl]-, 2,6-bis(1,1-dimethylethyl)-4-methylcyclohexyl ester.
P-11-0582	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Intermediate in manufacture of imaging chemical	(S) 1h-1,2,4-triazole-5-acetic acid, 1-acetyl-.alpha.-bromo-3-[4-(1,1-dimethylethyl)phenyl]-, 2,6-bis(1,1-dimethylethyl)-4-methylcyclohexyl ester.
P-11-0583	8/12/2011	11/9/2011	Eastman Kodak Company	(S) Coupler for imaging products; for export	(S) 3h-pyrrolo[1,2-b][1,2,4]triazole-7-carboxylic acid, 5-[[[bis(2-ethoxy-2-oxoethyl)amino]carbonyl]oxy]-6-cyano-2-[4-(1,1-dimethylethyl)phenyl]-, 2,6-bis(1,1-dimethylethyl)-4-methylcyclohexyl ester.
P-11-0584	8/12/2011	11/9/2011	CBI	(S) Crosslinker for waterborne polymers/coatings	(G) Isocyanate crosslinker.
P-11-0585	8/15/2011	11/12/2011	AOC L.L.C.	(S) Polymer component for laminating of fiber reinforced plastic composites	(S) 1,4-benzenedicarboxylic acid, polymer with 1,2-ethanediol, 2,5-furandione and 1,2-propanediol, reaction products with dicyclopentadiene.
P-11-0586	8/16/2011	11/13/2011	CBI	(G) Dyestuff	(G) Substituted phthalocyanine derivative.
P-11-0587	8/16/2011	11/13/2011	CBI	(G) Dyestuff	(G) Substituted benzimidazol sulfonic acid.
P-11-0588	8/17/2011	11/14/2011	CBI	(G) Plastic additive	(G) Alkyl amine ester.
P-11-0589	8/19/2011	11/16/2011	Wacker Chemical Corporation	(G) For both uses the production “is 100% because after industrial production formulations they are 100% consumed during final application”	(G) Copolymer of vinyl alkanoates and alkene sulfonic acid sodium salt.
P-11-0590	8/19/2011	11/16/2011	CBI	(G) Dispersant	(G) Alkyl acrylate, (alkylamino)alkyl ester, telomer with alkyl acrylate and dialkyl- trialkyl-alkoxyaromatic- heterocycloaliphaticketone.
P-11-0591	8/19/2011	11/16/2011	CBI	(G) Lamination adhesive	(G) Ipdi modified polyester resin.
P-11-0592	8/19/2011	11/16/2011	CBI	(G) Site limited intermediate	(G) 2-substituted phtalic acid ester.
P-11-0593	8/22/2011	11/19/2011	CBI	(G) Component of polyurethane foam	(G) Formaldehydem reaction products with alkylphenol and diethanolamine, alkoxy alkylated.
P-11-0594	8/22/2011	11/19/2011	CBI	(G) Rubber component	(G) Mercaptoalkoxysilane.
P-11-0595	8/23/2011	11/20/2011	Dow Chemical Company	(G) Water reducer in concrete intermediate	(G) Sodium salt initiated acrylic polymer.
P-11-0596	8/23/2011	11/20/2011	CBI	(S) Polyurethane catalyst	(G) Hexanedioic acid, compound with polyalkylenepolyamine.
P-11-0597	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0598	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0599	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0600	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0601	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0602	8/24/2011	11/21/2011	CBI	(G) Packaging material	(G) Poly(3-hydroxybutyrate).
P-11-0603	8/25/2011	11/22/2011	CBI	(G) Additive for manufacture of articles	(G) Modified starch acrylate polymer.
P-11-0604	8/26/2011	11/23/2011	CBI	(S) Polymer for flame-retardant coatings	(G) Flame retardant polymer for coatings.
P-11-0605	8/26/2011	11/23/2011	CBI	(G) Resin for protective industrial coatings	(G) Water based acrylic dispersion.
P-11-0606	8/26/2011	11/23/2011	CBI	(G) Contained use in energy production	(G) Cationic polyacrylate.
P-11-0607	8/26/2011	11/23/2011	CBI	(G) Additve flame retardant (open, non-dispersive use)	(G) Polyaromatic organophosphorus compound.
P-11-0608	8/26/2011	11/23/2011	CBI	(G) Epoxy catalyst	(S) 1,3-benzenediol, 4-[1-[[3-(1h-imidazol-1-yl)propyl]imino)ethyl]-.

In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received by EPA during this period: The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity.

Table II—4 TMEs Received From July 1, 2011 to August 26, 2011

Case no.	Received date	Projected notice end date	Manufacturer/Importer	Use	Chemical
T-11-0011	7/14/2011	8/27/2011	CBI	(S) Wastewater heavy metals removal	(G) Polymeric sulfide.
T-11-0012	7/29/2011	9/11/2011	Shell Chemical LP	(S) This product is a gas to liquids (gtl)” base oil used for drilling fluids and a guar polymer and/or proppant carrier for hydraulic fracturing”	(S) Distillates(fischer-tropsch), c10-20 branched and linear.
T-11-0013	8/1/2011	9/14/2011	CBI	(G) Productivity aid in the paper industry	(G) Polyaminoamide, sulfate salt.
T-11-0014	8/2/2011	9/15/2011	CBI	(G) Fuel blending component	(G) Petroleum distillate lights.

In Table III. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.

Table III— 63 NOCs Received From July 1, 2011 to August 26, 2011

Case no.	Received date	Commencement notice end date	Chemical
P-06-0370	7/25/2011	7/14/2011	(S) Benzoic acid nonyl ester, branched and linear.
P-07-0298	7/27/2011	6/30/2011	(G) Ethyl methacrylate based polymer.
P-08-0052	8/25/2011	8/16/2011	(S) Nitrotriazolone 3-nitro-1,2,4-triazol-5-one.
P-08-0359	7/22/2011	6/27/2011	(G) Alkyl alcohol reaction product with alkyl diisocyanate.
P-08-0620	7/26/2011	7/3/2011	(G) Lauryllactam, polymer with alkanedicarboxylic acid and alkanediamine.
P-09-0129	7/13/2011	7/4/2011	(G) Aqueous polyurethane resin dispersion.
P-09-0434	7/25/2011	6/7/2011	(S) 7-octen-4-one, 2,6-dimethyl-.
P-09-0515	8/24/2011	3/16/2011	(S) 2,5-furandione, polymer with 2-methyl-1-propene, amide, ammonium salt.
P-09-0628	7/6/2011	6/13/2011	(G) 1-substituted propane, 3-(triethoxysilyl)-, reaction products with polyethylene glycol mono-branched tridecyl) ether.
P-09-0639	7/14/2011	6/21/2011	(G) Alkyl substituted azo metal salt.
P-10-0047	8/2/2011	7/12/2011	(G) Alkenoic acid, 2-methyl-, 2-oxiranylmethyl ester, reaction products with 4,4′-methylenebis (cyclohexanamine).
P-10-0064	7/29/2011	7/6/2011	(G) Amidosilane.
P-10-0081	8/25/2011	7/12/2011	(G) Phenol, polymer with formaldehyde, glycidyl ether, reaction products with 5-amino-1,3,3-trialkylcycloalkanemethanamine.
P-10-0083	8/2/2011	7/12/2011	(G) Hydroxy-aryl, polymer with substituted benzene, cyanate.
P-10-0084	7/14/2011	6/21/2011	(G) Carbazole violet sulfonamide derivs.
P-10-0152	7/26/2011	7/19/2011	(G) Phosphated polyalkoxylate.
P-10-0175	7/15/2011	6/21/2011	(G) Aliphatic hydroxyfunctional polyester-polyurethane dispersion.
P-10-0275	7/28/2011	7/12/2011	(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidene polycarbomonocycle.
P-10-0278	7/28/2011	7/12/2011	(G) Polycarbomono cyclic sulphonium camphosulphonate.
P-10-0370	7/8/2011	6/8/2011	(G) Alkylol methacrylate.
P-10-0438	7/26/2011	7/19/2011	(G) Polyacrylic polyether graft.
P-10-0471	7/25/2011	7/21/2011	(G) Fluoro modified polyether modified polyacrylate.
P-10-0472	7/25/2011	7/21/2011	(G) Fluoro modified polyether modified polyacrylate.
P-10-0500	7/28/2011	7/12/2011	(G) Oxybiscarbomonocyclic acid, polymer with oxybis[heteropolycyclic ketone],(alkyl(c=1-4)-substituted bis [alkyl(c=2-5)amine],[halo(haloalkyl(c=1-4)alkylidene]bis[aminocarbomonocyclic )alcohol] and [halo(haloalkyl(c=1-4)alkyidene]bis(hydroxycarbomonocycle)]bis[aminobenzamide], alkyl(c=1-4)ester.
P-10-0509	7/22/2011	6/24/2011	(G) Ester polyol, fatty acid ester.
P-10-0543	7/28/2011	7/12/2011	(G) Substituted polyhydro-oxo-naphthalene sulfonate with alkylidyne polycarbomonocycle.
P-10-0579	7/21/2011	6/28/2011	(G) Aromatic isocyanate, polymer with alkoxides and diol.
P-10-0588	8/24/2011	7/30/2011	(S) Benzenamine, 4,4′-[1,3-phenylenebis(1-methylethylidene)]bis-.
P-11-0027	7/28/2011	7/12/2011	(G) (methoxymethyl) hydrocarbomonocycle.
P-11-0035	8/3/2011	8/2/2011	(G) Alkyl alkoxy sulfate sodium salt.
P-11-0058	8/26/2011	8/23/2011	(G) Aromatic diol, diaryl carboxylate.
P-11-0076	7/1/2011	6/28/2011	(G) Polyurethane derivative.
P-11-0106	7/18/2011	6/21/2011	(G) Unsaturated fatty acids, amides with polyethylenepolyamine.
P-11-0107	7/18/2011	6/22/2011	(G) Fatty acids, amides with triethylenetetramine.
P-11-0108	7/11/2011	6/17/2011	(G) Substituted alkanoic acid, polymer with alkanoic acid alkyl esters, with substituted polyglycol-initiated.
P-11-0151	8/1/2011	7/28/2011	(G) N-sulfoalkyl-aminocarbonylalkenyl, polymer modified with n,n-dialkyl-aminocarbonylalkenyl, sodium salt.
P-11-0167	7/6/2011	6/15/2011	(G) Aromatic isocyanate polymer with alkyldioic acid, polyol, and unsaturated alkyl acid.
P-11-0175	7/15/2011	6/25/2011	(G) Polyglycerol fatty acid ester.
P-11-0185	8/17/2011	7/27/2011	(G) Oil derived from the pyrolysis of rubber tire shreds.
P-11-0194	7/22/2011	7/4/2011	(S) 1,2,3-propanetricarboxylic acid, 2-(acetyloxy)-, 1,2,3-tris(2-ethylhexyl) ester.
P-11-0199	7/21/2011	7/12/2011	(G) Acrylic polymer.
P-11-0200	8/23/2011	8/17/2011	(G) Aluminum alkoxide complex, alkoxylated aluminum chelate.
P-11-0215	8/10/2011	7/21/2011	(S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0216	8/10/2011	7/21/2011	(S) 2-propenoic acid, 2-methyl-, dodecyl ester, telomer with butyl 2-propenoate, methyl 2-methyl-2-propenoate, tridecyl 2-methyl-2-propenoate, 3-(trimethoxysilyl)-1-propanethiol and 3-(trimethoxysilyl) propyl 2-methyl-2-propenoate.
P-11-0218	7/26/2011	7/25/2011	(G) Benzenedioic acid, polymer with alkanediol and carboxyaminoalkyl carbamic acid alkoxyalkylester.
P-11-0223	8/23/2011	8/11/2011	(G) Substituted tris-phenyl thiophenyl-sulfonium halogenide.
P-11-0229	7/26/2011	7/13/2011	(G) Polyester, polymer with 1,4-butanediol, dodecanedioic, 1,6-heaxanediol, .alpha.-hydro-.omega.-hydroxypoly (oxy-1,4-butanediyl) and isocyanate.
P-11-0255	8/4/2011	8/3/2011	(S) D-glucopyranose, oligomeric, decyl octyl glycosides, 2,3-dihydroxypropyl ethers, phosphates, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0261	7/12/2011	7/5/2011	(S) Aluminum barium europium magnesium oxide.
P-11-0262	7/19/2011	7/18/2011	(S) Europium strontium borate metaphosphate oxide.
P-11-0280	7/25/2011	7/23/2011	(G) Epoxy modified alkyd resin, partially neutralized.
P-11-0281	7/14/2011	6/27/2011	(S) Fatty acids, lanolin, esters with cholesterol-low lanolin alcs.
P-11-0282	7/14/2011	6/27/2011	(S) Fatty acids, c10-30, esters with cholesterol-low lanolin alcs.
P-11-0286	7/21/2011	7/20/2011	(G) Blocked polyester polyurethane, neutralized.
P-11-0289	8/8/2011	7/27/2011	(S) Heptanoic acid, 1,2,3-propanetriyl ester (9ci).
P-11-0293	8/4/2011	7/29/2011	(S) D-glucopyronase, oligomeric, c10-16-alkyl glycosides, 2-hydroxy-3-sulfopropyl ethers, sodium salts, polymers with 1,3-dichloro-2-propanol.
P-11-0298	8/11/2011	7/18/2011	(G) Ethoxylated epoxy amine polymer.
P-11-0299	8/11/2011	7/18/2011	(G) Polypropylene glycol, epoxy amine polymer.
P-11-0306	8/19/2011	7/28/2011	(G) Tertiary amine acrylate.
P-11-0308	8/11/2011	7/26/2011	(G) Acrylic polymer.
P-11-0334	8/23/2011	8/20/2011	(G) Aliphatic and alicyclic alcohol type polyester.
P-11-0350	8/16/2011	8/11/2011	(S) Phenol, 4,4′-sulfonylbis-, bis(mixed acetates and propionates).
P-11-0367	8/19/2011	8/11/2011	(G) Elastomer polyurethane.

If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

List of Subjects

• Environmental Protection
• Chemicals
• Hazardous substances
• Imports
• Notice of Commencement
• Premanufacturer
• Reporting and recordkeeping requirements
• Test marketing exemptions

Dated: September 9, 2011.

Darryl S. Ballard,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.