94-23440. Airworthiness Directives; General Electric Company CF6 Series Turbofan Engines  

  • [Federal Register Volume 59, Number 183 (Thursday, September 22, 1994)]
    [Unknown Section]
    [Page 0]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 94-23440]
    
    
    [[Page Unknown]]
    
    [Federal Register: September 22, 1994]
    
    
    -----------------------------------------------------------------------
    
    
    DEPARTMENT OF TRANSPORTATION
    14 CFR Part 39
    
    [Docket No. 93-ANE-41; Amendment 39-8907; AD 94-09-18]
    
     
    
    Airworthiness Directives; General Electric Company CF6 Series 
    Turbofan Engines
    
    AGENCY: Federal Aviation Administration, DOT.
    
    ACTION: Final rule; correction
    
    -----------------------------------------------------------------------
    
    SUMMARY: This document makes a correction to Airworthiness Directive 
    (AD) 94-09-18 applicable to General Electric Company (GE) CF6-6/-45/-50 
    series turbofan engines that was published in the Federal Register on 
    May 5, 1994 (59 FR 23139). One phrase in the compliance section is 
    incorrect and needs to be deleted; an additional description later in 
    the compliance section needs to be added. This document corrects both 
    errors. In all other respects, the original document remains the same.
    
    Effective DATE: June 6, 1994.
    
    FOR FURTHER INFORMATION CONTACT: Robert J. Ganley, telephone (617) 238-
    7138.
    
    SUPPLEMENTARY INFORMATION: A final rule airworthiness directive 
    applicable to General Electric Company (GE) CF6-6/-45/-50 series 
    turbofan engines, was published in the Federal Register on May 5, 1994 
    (59 FR 23139). The following corrections are needed:
        On page 23141, in the left column, in paragraph (a)(5)(ii), in the 
    fifth line, the phrase ``prior to accumulating 4,500 CSN,'' should be 
    deleted.
        On page 23141, starting in the center column, in paragraph (b)(5), 
    in the seventh and eighth line, the words ``and inner'' should be added 
    after the word ``rim'' to read, ``ECI the rim and inner bolt holes''.
    
        Issued in Burlington, MA, on September 12, 1994.
    Jay J. Pardee,
    Manager, Engine and Propeller Directorate, Aircraft Certification 
    Service.
    [FR Doc. 94-23440 Filed 9-21-94; 8:45 am]
    BILLING CODE 4910-13-P
    
    
    

Document Information

Published:
09/22/1994
Department:
Transportation Department
Entry Type:
Uncategorized Document
Action:
Final rule; correction
Document Number:
94-23440
Dates:
June 6, 1994.
Pages:
0-0 (1 pages)
Docket Numbers:
Federal Register: September 22, 1994, Docket No. 93-ANE-41, Amendment 39-8907, AD 94-09-18
CFR: (1)
14 CFR 39