2024-21797. Airworthiness Directives; Airbus SAS Airplanes  

  • Estimated Costs for Required Actions

    Action Labor cost Parts cost Cost per product Cost on U.S. operators
    Part and serial number inspection 0.5 work-hours × $85 per hour = $42.50 per airplane $0 $42.50 $298.
    Inspection of affected axle Up to 16 work-hours × $85 per hour = $1,360 per axle, per inspection cycle 0 Up to $1,360 per axle, per inspection cycle Up to $9,520 per axle, per inspection cycle.

    The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need these on-condition actions:

    Estimated Costs of On-Condition Actions

    Action Labor cost Parts cost Cost per product
    Repair Up to 16 work-hours × $85 per hour = $1,360 $0 $1,360.
    Axle replacement Up to 88 work-hours × $85 per hour = $7,480 47,126 $54,606.
    Optional replacement of MLG Up to 48 work-hours × $85 per hour = $4,080 (*) Up to $4,080.
    * The FAA has received no definitive data on which to base the cost estimates for a replacement MLG. The parts cost must be obtained through SAFRAN.

Document Information

Effective Date:
10/30/2024
Published:
09/25/2024
Department:
Federal Aviation Administration
Entry Type:
Rule
Action:
Final rule.
Document Number:
2024-21797
Dates:
This AD is effective October 30, 2024.
Pages:
78226-78229 (4 pages)
Docket Numbers:
Docket No. FAA-2024-0223, Project Identifier MCAI-2023-00996-T, Amendment 39-22821, AD 2024-16-15
RINs:
2120-AA64: Airworthiness Directives
RIN Links:
https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
Topics:
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety
PDF File:
2024-21797.pdf
Supporting Documents:
» U.S. DOT/FAA - Supplemental AD Documents
» U.S. DOT/FAA - Supplemental AD Documents
» U.S. DOT/FAA - Supplemental AD Documents
CFR: (1)
14 CFR 39