2013-23569. Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Metal Can Manufacturing Surface Coating (Renewal)  

  • Start Preamble

    AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Notice.

    SUMMARY:

    The Environmental Protection Agency has submitted an information collection request (ICR), “NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)” (EPA ICR No. 2079.05, OMB Control No. 2060-0541), to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed extension of the ICR, which is currently approved through October 31, 2013. Public comments were previously requested via the Federal Register (78 FR 33409) on June 4, 2013 during a 60-day comment period. This notice allows for an additional 30 days for public Start Printed Page 59672comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An Agency may not conduct or sponsor and a person is not required to respond to a collection of information unless it displays a currently valid OMB control number.

    DATES:

    Additional comments may be submitted on or before October 28, 2013.

    ADDRESSES:

    Submit your comments, referencing Docket ID Number EPA-HQ-OECA-2013-0345, to: (1) EPA online, using www.regulations.gov (our preferred method), by email to: docket.oeca@epa.gov, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA.

    EPA's policy is that all comments received will be included in the public docket without change including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Learia Williams, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460; telephone number: (202) 564-4113; fax number: (202) 564-0050; email address: williams.learia@epa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Supporting documents which explain in detail the information that the EPA will be collecting are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, WJC West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone number for the Docket Center is 202-566-1744. For additional information about EPA's public docket, visit: http://www.epa.gov/​dockets.

    Abstract: The affected entities are subject to the General Provisions of the NESHAP for Metal Can Manufacturing Surface Coating at 40 CFR part 63, subpart A, and any changes, or additions, to the Provisions specified at 40 CFR part 63, subpart KKKK. Owners or operators of the affected facilities must submit a one-time-only report of any physical or operational changes, initial performance tests, and periodic reports and results. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. Reports are required semiannually at a minimum.

    Form Numbers: None.

    Respondents/affected entities: Metal can manufacturing facilities with surface coating operations.

    Respondent's obligation to respond: Mandatory (40 CFR part 63, subpart KKKK).

    Estimated number of respondents: 71 (total).

    Frequency of response: Initially, occasionally, and semiannually

    Total estimated burden: 27,517 hours (per year). “Burden” is defined at 5 CFR 1320.3(b).

    Total estimated cost: $3,258,800 (per year), includes $85,200 annualized capital or operation & maintenance costs.

    Changes in the Estimates: There is no change in the labor hours in this ICR compared to the previous ICR. This is due to two considerations: (1) The regulations have not changed over the past three years and are not anticipated to change over the next three years; and (2) the growth rate for the respondents is very low, negative or non-existent. Therefore, the labor hours in the previous ICR reflect the current burden to the respondents and are reiterated in this ICR. However, there is an adjustment increase in the respondent cost due to labor rate increases.

    Start Signature

    Richard T. Westlund,

    Acting Director, Collection Strategies Division.

    End Signature End Supplemental Information

    [FR Doc. 2013-23569 Filed 9-26-13; 8:45 am]

    BILLING CODE 6560-50-P

Document Information

Published:
09/27/2013
Department:
Environmental Protection Agency
Entry Type:
Notice
Action:
Notice.
Document Number:
2013-23569
Dates:
Additional comments may be submitted on or before October 28, 2013.
Pages:
59671-59672 (2 pages)
Docket Numbers:
EPA-HQ-OECA-2013-0345, FRL-9536-7
PDF File:
2013-23569.pdf
Supporting Documents:
» Supporting Statement - NESHAP for Metal Can Manufacturing Surface Coating (40 CFR Part 63, Subpart KKKK) (Renewal)
» Supporting Statement