[Federal Register Volume 59, Number 187 (Wednesday, September 28, 1994)]
[Unknown Section]
[Page ]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-23889]
[Federal Register: September 28, 1994]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 180
[OPP-300359; FRL-4909-7]
RIN 2070-AC18
Polystyrene; Tolerance Exemption
AGENCY: Environmental Protection Agency (EPA).
ACTION: Proposed rule.
-----------------------------------------------------------------------
SUMMARY: This document proposes to establish an exemption from the
requirement of a tolerance for residues of polystyrene (CAS Reg. No.
9003-53-6) when used as an inert ingredient (suspending agent,
thickener) in pesticide formulations applied to growing crops, raw
agricultural commodities after harvest, or animals. Dow Chemical Co.
requested this proposed regulation.
DATES: Comments, identified by the document control number [OPP-
300359], must be received on or before October 28, 1994.
ADDRESSES: By mail, submit written comments to: Public Response and
Program Resources Branch, Field Operations Division (7506C), Office of
Pesticide Programs, Environmental Protection Agency, 401 M St., SW.,
Washington, DC 20460. In person, deliver to: Rm. 1132, Crystal Mall
Bldg. #2, 1921 Jefferson Davis Hwy., Arlington, VA 22202.
Information submitted as a comment concerning this document may be
claimed confidential by marking any part or all of that information as
``Confidential Business Information'' (CBI). Information so marked will
not be disclosed except in accordance with procedures set forth in 40
CFR part 2. A copy of the comment that does not contain CBI must be
submitted for inclusion in the public record. Information not marked
confidential will be included in the public docket by EPA without prior
notice. The public docket is available for public inspection in Rm.
1132 at the address given above, from 8 a.m. to 4 p.m., Monday through
Friday, excluding legal holidays.
FOR FURTHER INFORMATION CONTACT: By mail: Tina Levine, Registration
Support Branch, Registration Division (7505W), Office of Pesticide
Programs, Environmental Protection Agency, 401 M St., SW., Washington,
DC 20460. Office location and telephone number: 2800 Crystal Drive,
North Tower, 6th Floor, Arlington, VA 22202, (703)-308-8393.
SUPPLEMENTARY INFORMATION: Dow Chemical Co., 1320 Waldo Ave., Suite
300, Midland, MI 48674, submitted pesticide petition (PP) 4E04371 to
EPA requesting that the Administrator, pursuant to section 408(e) of
the Federal Food, Drug, and Cosmetic Act (FFDCA) (21 U.S.C. 346a(e)),
propose to amend 40 CFR part 180 by establishing an exemption from the
requirement of a tolerance for residues of polystyrene (CAS Reg. No.
9003-53-6) when used as an inert ingredient (suspending agent,
thickener) in pesticide formulations applied to growing crops, to raw
agricultural commodities after harvest, or to animals.
Inert ingredients are all ingredients that are not active
ingredients as defined in 40 CFR 153.125, and include, but are not
limited to, the following types of ingredients (except when they have a
pesticidal efficacy of their own): solvents such as alcohols and
hydrocarbons; surfactants such as polyoxyethylene polymers and fatty
acids; carriers such as clay and diatomaceous earth; thickeners such as
carrageenan and modified cellulose; wetting, spreading, and dispersing
agents; propellents in aerosol dispensers; microencapsulating agents;
and emulsifiers. The term ``inert'' is not intended to imply
nontoxicity; the ingredient may or may not be chemically active.
The data submitted in the petition and other relevant material have
been evaluated. As part of the EPA policy statement on inert
ingredients, published in the Federal Register of April 22, 1987 (52 FR
13305), the Agency set forth a list of studies which would generally be
used to evaluate the risks posed by the presence of an inert ingredient
in a pesticide formulation. However, where it can be determined without
that data that the inert ingredient will present minimal or no risk,
the Agency generally does not require some or all of the listed studies
to rule on the proposed tolerance or exemption from the requirement of
a tolerance for an inert ingredient. The Agency has decided that no
data, in addition to that described below, for polystyrene will need to
be submitted. The rationale for this decision is described below:
In the case of certain chemical substances that are defined as
``polymers,'' the Agency has established a set of criteria which
identify categories of polymers that present low risk. These criteria
(described in 40 CFR 723.250) identify polymers that are relatively
unreactive and stable compared to other chemical substances as well as
polymers that typically are not readily absorbed. These properties
generally limit a polymer's ability to cause adverse effects. In
addition, these criteria exclude polymers about which little is known.
The Agency believes that polymers meeting the criteria noted above will
present minimal or no risk. Polystyrene conforms to the definition of a
polymer given in 40 CFR 723.250 (b)(11) and meets the following
criteria that are used to identify low risk polymers:
1. The minimum number-average molecular weight of polystyrene is
50,000. Substances with molecular weights greater than 400 generally
are not absorbed through the intact skin, and substances with molecular
weights greater than 1,000 generally are not absorbed through the
intact gastrointestinal (GI) tract. Chemicals not absorbed through skin
or GI tract generally are incapable of eliciting a toxic response.
2. Polystyrene is not a cationic polymer, nor is it reasonably
anticipated to become a cationic polymer in a natural aquatic
environment.
3. Polystyrene does not contain less than 32.0 percent by weight of
the atomic element carbon.
4. Polystyrene contains as an integral part of its composition the
atomic elements carbon, hydrogen, nitrogen, and oxygen.
5. Polystyrene does not contain as an integral part of its
composition, except as impurities, any elements other than those listed
in 40 CFR 723.250 (d)(3)(ii).
6. Polystyrene is not a biopolymer, a synthetic equivalent of a
biopolymer, or a derivative or a modification of a biopolymer that is
substantially intact.
7. Polystyrene is not manufactured from reactants containing, other
than impurities, halogen atoms or cyano groups.
8. Polystyrene does not contain a reactive functional group that is
intended or reasonably anticipated to undergo further reaction.
9. Polystyrene is not designed or reasonably anticipated to
substantially degrade, decompose, or depolymerize.
Based on the information above and review of its use, EPA has found
that, when used in accordance with good agricultural practice, this
ingredient is useful and a tolerance is not necessary to protect the
public health. Therefore, EPA proposes that the exemption from the
requirement of a tolerance be established as set forth below.
Any person who has registered or submitted an application for
registration of a pesticide, under the Federal Insecticide, Fungicide,
and Rodenticide Act (FIFRA) as amended, that contains any of the
ingredients listed herein, may request within 30 days after the
publication of this document in the Federal Register that this
rulemaking proposal be referred to an Advisory Committee in accordance
with section 408(e) of the FFDCA.
Interested persons are invited to submit written comments on the
proposed regulation. Comments must bear a notation indicating the
document control number [OPP-300359]. All written comments filed in
response to this petition will be available in the Public Response and
Program Resources Branch, at the address given above, from 8 a.m. to 4
p.m., Monday through Friday, except legal holidays.
The Office of Management and Budget has exempted this rule from the
requirements of section 2 of Executive Order 12866.
Pursuant to the requirements of the Regulatory Flexibility Act
(Pub. L. 96-354, 94 Stat. 1164, 5 U.S.C. 601-612), the Administrator
has determined that regulations establishing new tolerances or raising
tolerance levels or establishing exemptions from tolerance requirements
do not have an economic impact on a substantial number of small
entities. A certification statement to this effect was published in the
Federal Register of May 4, 1981 (46 FR 24950).
List of Subjects in 40 CFR Part 180
Environmental protection, Administrative practice and procedure,
Agricultural commodities, Pesticides and pests, Recording and
recordkeeping requirements.
Dated: September 14, 1994.
Stephen L. Johnson,
Director, Registration Division, Office of Pesticide Programs.
Therefore, it is proposed that 40 CFR part 180 be amended as
follows:
PART 180--[AMENDED]
1. The authority citation for part 180 continues to read as
follows:
Authority: 21 U.S.C. 346a and 371.
2. In Sec. 180.1001 paragraphs (c) and (e) are amended in the
tables therein by adding and alphabetically inserting the inert
ingredient, to read as follows:
Sec. 180.1001 Exemptions from the requirement of a tolerance.
* * * * *
(c) * * *
------------------------------------------------------------------------
Inert ingredients Limits Uses
------------------------------------------------------------------------
*******
Polystyrene (CAS Reg. No. .................. Suspending agent,
9003-53-6), minimum thickener.
number average molecular
weight 50,000..
*******
------------------------------------------------------------------------
* * * * *
(e) * * *
------------------------------------------------------------------------
Inert ingredients Limits Uses
------------------------------------------------------------------------
*******
Polystyrene (CAS Reg. No. .................. Suspending agent,
9003-53-6), minimum thickener.
number average molecular
weight 50,000..
*******
------------------------------------------------------------------------
[FR Doc. 94-23889 Filed 9-27-94; 8:45 am]
BILLING CODE 6560-50-F
