[Federal Register Volume 59, Number 171 (Tuesday, September 6, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-21818]
[[Page Unknown]]
[Federal Register: September 6, 1994]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 52
[MO-13-1-6558; FRL-5059-6]
Approval and Promulgation of Implementation Plans; State of
Missouri
AGENCY: Environmental Protection Agency (EPA).
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: On August 30, 1993 (58 FR 45451), EPA approved revisions to
Missouri's rules 10 CSR 10-2.290 and 10 CSR 10-5.340, which apply to
rotogravure and flexographic printing facilities in Kansas City,
Missouri, and St. Louis, Missouri. Part 52 was amended to incorporate
by reference the changes to those rules; however section (2),
Definitions, from both rules was not included. This document is to
correct the deficiency.
EFFECTIVE DATE: September 6, 1994.
ADDRESSES: Copies of the documents relevant to this action are
available for public inspection during normal business hours at: the
Environmental Protection Agency, Air Branch, 726 Minnesota Avenue,
Kansas City, Kansas 66101; and EPA Air and Radiation Docket and
Information Center, 401 M Street, SW., Washington, DC 20460.
FOR FURTHER INFORMATION CONTACT: Lisa V. Haugen at (913) 551-7877.
List of Subjects in 40 CFR Part 52
Air pollution control, Incorporation by reference,
Intergovernmental relations, Ozone, Reporting and recordkeeping
requirements, Volatile organic compounds.
Dated: July 22, 1994.
William Rice,
Acting Regional Administrator.
Part 52, chapter I, title 40 of the Code of Federal Regulations is
amended as follows:
PART 52--[AMENDED]
1. The authority citation for part 52 continues to read as follows:
Authority: 42 U.S.C. 7401-7671q.
Subpart AA--Missouri
2. Section 52.1320 is amended by revising paragraph (c)(84)(i)(A)
to read as follows:
Sec. 52.1320 Identification of plan.
* * * * *
(c) * * *
(84) * * *
(i) * * *
(A) Revised regulations 10 CSR 10-2.290 (except section (6),
Compliance Dates) and 10 CSR 10-5.340 (except section (6), Compliance
Dates), both entitled Control of Emissions from Rotogravure and
Flexographic Printing Facilities, effective February 6, 1992.
* * * * *
[FR Doc. 94-21818 Filed 9-2-94; 8:45 am]
BILLING CODE 6560-50-F
