01-29665. Antidumping Duty Order: Certain Hot-Rolled Carbon Steel Flat Products From Ukraine

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of antidumping duty order.

EFFECTIVE DATE:

November 29, 2001.

FOR FURTHER INFORMATION CONTACT:

Lori Ellison at 202-482-5811, Import Administration, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue, NW., Washington, DC 20230.

Applicable Statute and Regulations

Unless otherwise indicated, all citations to the Tariff Act of 1930, as amended (“Act”), are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act. In addition, unless otherwise indicated, all citations to the Department's regulations are to the regulations at 19 CFR part 351 (2000).

Background

On September 21, 2001, the Department issued its final determination in the antidumping duty investigation of hot-rolled steel from Ukraine. See Notice of Final Determination of Sales At Less Than Fair Value: Certain Hot-Rolled Carbon Steel Flat Products from Ukraine, 66 FR 50401 (October 3, 2001) (“Final Determination”).

On November 13, 2001, the International Trade Commission (“ITC”) notified the Department of its final determination pursuant to section 735(b)(1)(A)(i) of the Act that an industry in the United States is materially injured by reason of less-than-fair-value imports of subject merchandise from Ukraine.

Scope of Investigation

For purposes of this investigation, the products covered are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this investigation.

Specifically included within the scope of this investigation are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.

Steel products to be included in the scope of this investigation, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

1.80 percent of manganese, or

2.25 percent of silicon, or

1.00 percent of copper, or

0.50 percent of aluminum, or

1.25 percent of chromium, or

0.30 percent of cobalt, or

0.40 percent of lead, or

1.25 percent of nickel, or

0.30 percent of tungsten, or

0.10 percent of molybdenum, or

0.10 percent of niobium, or

0.15 percent of vanadium, or

0.15 percent of zirconium.

All products that meet the physical and chemical description provided above are within the scope of this investigation unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this investigation:

• Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506).
• Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher.
• Ball bearing steels, as defined in the HTSUS.
• Tool steels, as defined in the HTSUS.
• Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent.
• ASTM specifications A710 and A736.
• USS abrasion-resistant steels (USS AR 400, USS AR 500).
• All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507).
• Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.

The merchandise subject to this investigation is classified in the HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90. Certain hot-rolled carbon steel flat products covered by this investigation, including: Vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS subheadings are provided for convenience and U.S. Customs purposes, the written description of the merchandise under investigation is dispositive.

Antidumping Duty Order

In accordance with section 736(a)(1) of the Act, the Department is directing Customs officers to assess, upon further advice by the Department, antidumping duties equal to the amount by which the normal value of the merchandise exceeds the export price (or constructed export price) of the merchandise for all relevant entries of hot-rolled carbon steel flat products from Ukraine. The antidumping duties will be assessed on all unliquidated entries of hot-rolled carbon steel flat products from Ukraine entered, or withdrawn from warehouse, for consumption on or after May 3, 2001, the date on which the Department published its notice of preliminary determination in the Federal Register. Customs officers must require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the estimated weighted-average antidumping duty margins as noted below. The “Ukraine-Wide” rate applies to all exporters of subject merchandise from Ukraine.

Exporter/manufacturer	Weighted-average margin
Ukraine-Wide Rate	90.33

This notice constitutes the antidumping duty order with respect to hot-rolled carbon steel flat products from Ukraine. Interested parties may contact the Department's Central Records Unit, room B-099 of the main Department of Commerce building, for copies of an updated list of antidumping duty orders currently in effect.

This order is published in accordance with section 736(a) of the Act.

Dated: November 20, 2001.

Faryar Shirzad,

Assistant Secretary for Import Administration.