01-3873. Certain New Chemicals; Receipt and Status Information  

  • Start Preamble

    AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Notice.

    SUMMARY:

    Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 20, 2000 to January 09, 2001, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

    ADDRESSES:

    Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51963 and the specific PMN number in the subject line on the first page of your response.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Barbara Cunningham, Director, Office of Program Management and Evaluation, Office of Pollution Prevention and Toxics (7401), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. General Information

    A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

    B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

    1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations,” “Regulations and Proposed Rules,” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the Federal Register listings at http://www.epa.gov/​fedrgstr/​.

    2. In person. The Agency has established an official record for this action under docket control number OPPTS-51963. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, any test data submitted by the manufacturer/importer and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099.

    C. How and to Whom Do I Submit Comments?

    You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is Start Printed Page 10500imperative that you identify docket control number OPPTS-51963 and the specific PMN number in the subject line on the first page of your response.

    1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.

    2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 260-7093.

    3. Electronically. You may submit your comments electronically by e-mail to: “oppt.ncic@epa.gov,” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51963 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

    D. How Should I Handle CBI that I Want to Submit to the Agency?

    Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.

    E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your comments:

    1. Explain your views as clearly as possible.

    2. Describe any assumptions that you used.

    3. Provide copies of any technical information and/or data you used that support your views.

    4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

    5. Provide specific examples to illustrate your concerns.

    6. Offer alternative ways to improve the notice or collection activity.

    7. Make sure to submit your comments by the deadline in this document.

    8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

    II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 20, 2000 to January 09, 2001, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

    III. Receipt and Status Report for PMNs

    This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

    In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

    Table I.—60 Premanufacture Notices Received From: 12/20/00 to 01/09/01

    Case No.Received DateProjected Notice End DateManufacturer/ImporterUseChemical
    P-01-018512/20/0003/20/01Westvaco Corporation - Chemical Division(S) Asphalt emulsifier(G) Fatty acids, tall-oil, reaction Products with castor oil and substituted amines
    P-01-018612/20/0003/20/01Westvaco Corporation - Chemical Division(S) Asphalt emulsifier salt(G) Fatty acids, tall-oil, reaction Products with castor oil and substituted amines, hydrochlorides
    P-01-018712/20/0003/20/01Westvaco Corporation - Chemical Division(S) Asphalt emulsifier salt(G) Fatty acids, tall-oil, reaction Products with castor oil and substituted amines, acetates
    P-01-018812/20/0003/20/01Westvaco Corporation - Chemical Division(S) Asphalt emulsifier salt(G) Fatty acids, tall-oil, reaction Products with castor oil and substituted amines, phosphates
    P-01-018912/20/0003/20/01CBI(G) Polymerization initiator(G) Peroxy ester
    Start Printed Page 10501
    P-01-019012/21/0003/21/01CBI(S) Energy (ultraviolet or electron beam) curing resins for coatings applied onto metal, wood, paper and plastics(G) Polyester acrylate
    P-01-019112/21/0003/21/01CBI(G) Adhesive(G) Modified polyolefin
    P-01-019212/20/0003/20/01Reichhold, Inc(S) Primer coatings and flooring(G) Reaction product of aliphatic amines with fatty acids, phthalic anhydride and epoxide oligomers
    P-01-019312/20/0003/20/01CBI(G) Polymeric binder(G) Styrene-methacrylate copolymer
    P-01-019412/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-019512/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-019612/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-019712/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-019812/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-019912/20/0003/20/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-020012/21/0003/21/01Dystar L.P.(S) Dyestuff for the coloration of polyamide fibers(G) 1,7-naphthalenedisulfonic acid, 4-(substituted)-5-hydroxy-6-(substituted)-, disodium salt
    P-01-020112/22/0003/22/01CBI(G) Lubricant for metalworking, cutting and drilling applications(G) Mixed esters of thoxytriethanolamine, polyol, and fatty acids
    P-01-020212/22/0003/22/01Air Products and Chemicals Inc(S) Curing agent for epoxy coating systems(G) Polyamine adduct
    P-01-020312/26/0003/26/01CBI(G) Additive(G) Alkanedioic acid diester
    P-01-020412/26/0003/26/01Dow Corning Corporation(S) Component of silicone release emulsion(S) Siloxanes and Silicones, lauryl me
    P-01-020512/26/0003/26/01Mitsubishi Gas Chemical america, Inc(S) Extender for epoxy resin paint(S) Formaldehyde. polymer with 1,3,5-trimethylbenzene*
    P-01-020612/27/0003/27/01Estron Chemical, Inc(S) Flow control additive for industrial coatings(G) Acrylic polymer
    P-01-020712/27/0003/27/01Reichhold, Inc(S) Binder for glass(G) Unsaturated polyester resin
    P-01-020812/27/0003/27/01CBI(S) Reactive diluent(G) Polyester polycarbamate
    P-01-020912/27/0003/27/01CBI(S) Reactive diluent(G) Polyester polycarbamate
    P-01-021012/27/0003/27/01CBI(S) Reactive diluent(G) Polyester polycarbamate
    P-01-021112/27/0003/27/01CBI(S) Reactive diluent(G) Polyester polycarbamate
    P-01-021212/27/0003/27/01CBI(S) Reactive diluent(G) Polyester polycarbamate
    P-01-021312/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021412/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021512/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021612/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021712/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021812/27/0003/27/01CBI(S) Binder/tackifier for inks(G) Hydrocarbon resin
    P-01-021912/27/0003/27/01Shin ETSU Microsi, Inc(S) Ingredient for electric/electronic components seal(S) Oxirane, 2,2'-[1,6-naphthalenediylbis (oxymethylene)]bis-
    P-01-022012/28/0003/28/013M company(G) Binder(G) Acrylate polymer
    P-01-022112/28/0003/28/01CBI(S) Organic synthesis intermediate(G) Xanthylium, 3,6-diamino-9-(2-sulfophenyl)-, N,N'-bis(mixed 2-substituted phenyl) derivs., inner salts
    P-01-022212/28/0003/28/01Dainippon Ink and Chemicals, Inc(S) UV curable resin for glass fiber coatings(G) Urethane acrylate
    P-01-022312/28/0003/28/01CBI(G) Component of manufactured consumer article - contained use(G) Xanthylium, 3,6-bis(methylamino)-9-(2-sulfophenyl)-, N,N'-bis(mixed 2-substituted phenyl) derivs., inner salts
    P-01-022412/27/0003/27/01CBI(G) Filler treatment(G) Organosilane ester
    P-01-022512/27/0003/27/01CBI(G) Filler treatment(G) Organosilane ester
    P-01-022612/27/0003/27/01CBI(G) Filler treatment(G) Organosilane ester
    P-01-022712/28/0003/28/01CBI(G) Component of manufactured consumer article - contained use(G) Decyl 4-nitrobenzene derivative
    P-01-022812/28/0003/28/013M company(G) Film coating additive(G) Acrylate polymer
    P-01-022912/28/0003/28/01CBI(G) Component of manufactured consumer article - contained use(G) 1,4-butanediyl, diethyl derivative
    P-01-023012/29/0003/29/01Ashland Inc(G) Resin additive(G) Hydrolyzed silane
    P-01-023112/29/0003/29/01CBI(G) An open,non-dispersive use(G) Hydrogenated rosin ester
    P-01-023201/02/0104/02/013M company(S) Fire extinguishing agent(G) Perfluoroalkyl derivative
    P-01-023312/29/0003/29/01CBI(G) Resin for coating(G) Modified acrylic resin
    P-01-023412/29/0003/29/01CBI(G) Resin for coating(G) Modified acrylic resin
    Start Printed Page 10502
    P-01-023501/03/0104/03/01CBI(S) Intermediate(G) Substituted cyclohexanediamine
    P-01-023601/03/0104/03/01CBI(G) Open, non-dispersive use(G) Acrylic polymer salt
    P-01-023701/03/0104/03/01CBI(G) Open, non-dispersive use(G) Acrylic polymer salt
    P-01-023801/08/0104/08/01Wacker Silicones Corporation(S) New pigment for use in automotive finishes(G) Modified polyacrylate
    P-01-023901/08/0104/08/01CBI(G) Epoxy hardener - open, non-dispersive use(G) Part acrylated epoxy cresol novolac acrylate
    P-01-024001/08/0104/08/01CBI(G) UV sensitive resin - open, non-dispersive use(G) Carboxylated epoxy cresol novolac acrylate
    P-01-024101/09/0104/09/01Image Polymers company(S) Toner binder(G) Polyether polyol
    P-01-024201/08/0104/08/01Dow Corning Corporation(S) Cure catalyst(S) Iodonium, (3-methylphenyl)phenyl-, ar'-c12-13-branched alkyl derivs., (oc-6-11)-hexafluoroantimonates(1-)
    P-01-024301/09/0104/09/01CBI(G) Ion exchange resin for water treatment(G) Crosslinked copolymer of substituted polystyrene
    P-01-024401/09/0104/09/01CBI(G) Syntan(G) Co-polymer of acrylic esters

    In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

    Table II.—27 Notices of Commencement From: 12/20/00 to 01/09/01

    Case No.Received DateCommencement/Import DateChemical
    P-00-018912/27/0012/04/00(G) Modified polyurethane
    P-00-075612/22/0012/19/00(G) Isocyanate-terminated polyester polyurethane polymer
    P-00-077312/21/0012/13/00(S) 1-dodecanesulfonyl chloride
    P-00-087301/09/0112/12/00(G) Urethane acrylate
    P-00-087401/09/0112/12/00(G) Urethane acrylate
    P-00-091112/27/0012/07/00(G) Perfluorinated organic peroxide
    P-00-099712/22/0011/28/00(G) 2-naphthalenesulfonic acid, 6-(substituted)-4-substituted-3-[[4-[[2-(sulfooxy)ethyl]sulfonyl]phenyl]azo]-, salt
    P-00-102912/26/0012/07/00(G) Substituted pyridine
    P-00-105212/27/0012/06/00(G) Epoxy modified silicone
    P-00-109912/21/0012/07/00(G) A functionalized polymethine infra red absorber
    P-00-113612/22/0012/11/00(G) Substituted alkenyl succinic anhydride reaction product with polyalkylenepolyamine, alkylphenol, hydroxyalkylcarboxylic acid and an aldehyde
    P-00-119801/08/0112/29/00(G) Alkohol alkoxylate
    P-96-157201/04/0112/18/00(G) Hydrophobically modified polyethylene glycol - aminoplast copolymer
    P-98-028712/22/0012/07/00(S) Ferrate(4-), hexakis(cyano-.kappa.c)-, cobalt(2+) potassium (1:1:2), (0c-6-11)-
    P-99-105201/05/0112/17/00(S) Cellulose, acetate butanoate, carboxymethyl ether
    P-99-140812/20/0011/21/00(G) Modified polyether (generic Chemical name for all substances)
    P-99-140912/20/0011/21/00(G) Modified polyether (generic Chemical name for all substances)
    P-99-141012/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141112/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141212/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141312/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141412/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141512/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141612/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141712/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-99-141812/20/0011/21/00(G) Modified polyether (generic chemical name for all substances)
    P-91-020201/08/0111/22/00(S) 1,4-benzenedicarboxylic acid; 1,2-ehtanediol; 1,4-cyclohexanedimethanol; ethanol, 2,2'-oxybis; [isopropanol, ti(4+)salt
    Start List of Subjects Start Printed Page 10503

    List of Subjects

    • Environmental protection
    • Chemicals
    • Premanufacturer notices
    End List of Subjects Start Signature

    Dated: January 31, 2000.

    Deborah A. Williams,

    Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

    End Signature End Supplemental Information

    [FR Doc. 01-3873 Filed 2-14-01; 8:45 am]

    BILLING CODE 6560-50-S

Document Information

Published:
02/15/2001
Department:
Environmental Protection Agency
Entry Type:
Notice
Action:
Notice.
Document Number:
01-3873
Pages:
10499-10503 (5 pages)
Docket Numbers:
OPPTS-51963, FRL-6769-5
PDF File:
01-3873.pdf