02-20991. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 8, 2002 to July 22, 2002, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

DATES:

Comments identified by the docket ID number OPPT-2002-0050 and the specific PMN number, must be received on or before September 18, 2002.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0050 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Barbara Cunningham, Director, Office of Program Management and Evaluation, Office of Pollution Prevention and Toxics (7401), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations”,” Regulations and Proposed Rules, and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the Federal Register listings at http://www.epa.gov/​fedrgstr/​.

2. In person. The Agency has established an official record for this action under docket ID number OPPT-2002-0050. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, any test data submitted by the Manufacturer/Importer is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B- 607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is [phone].

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket ID number OPPT-2002-0050 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

3. Electronically. You may submit your comments electronically by e-mail to: “[e-mail],” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket ID number OPPT-2002-0050 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 8, 2002 to July 22, 2002, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The “S” and “G” that precede the chemical names denote whether the chemical idenity is specific or generic.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 22 Premanufacture Notices Received From: 07/08/02 to 07/22/02

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-02-0822	07/09/02	10/07/02	Reichhold, Inc.	(G) Coating resin	(G) Modified polyester of terephthalic acid, ethylene glycol and neopentyl glycol
P-02-0823	07/09/02	10/07/02	CBI	(S) Urethane foam catalyst	(G) Tertiary amine carboxylic acid salt
P-02-0824	07/09/02	10/07/02	Reichhold, Inc.	(G) Coating resin	(G) Modified polyester of terephthalic acid, ethylene glycol and neopentyl glycol
P-02-0825	07/09/02	10/07/02	CBI	(G) Catalyst	(G) Tertiary amine
P-02-0826	07/12/02	10/10/02	Apex Advanced Technologies, LLC	(G) Lubricant and surface agent for metal forming and injection molding.	(S) Octadecanoic acid, compd. with guanidine (1:1)
P-02-0827	07/12/02	10/10/02	CIBA Specialty Chemicals Corporation	(S) Light stabilizer for coatings and adhesives	(G) Bisacylphosphinoxide
P-02-0828	07/12/02	10/10/02	NA Industries, Inc.	(G) Concrete admixture	(G) Polyether derivative
P-02-0829	07/15/02	10/13/02	Nagase America Corporation	(G) Additive for lubricants	(G) Molybdenum dithio carbamate
P-02-0830	07/16/02	10/14/02	Cognis Corporation	(G) Synthetic fiber additive	(S) Oxirane, methyl-, polymer with oxirane, didodecanoate
P-02-0831	07/16/02	10/14/02	GE silicones	(S) Intermediate	(G) Crosslinked alkyl silicone
P-02-0832	07/16/02	10/14/02	Jowat Corp.	(G) Wood bonding	(G) Polyurethane prepolymers
P-02-0833	07/17/02	10/15/02	CIBA Specialty Chemicals Corporation	(S) Polymerization initiator and regulator for thermoplastics and elastomers	(G) Aromatic ether derivative
P-02-0834	07/17/02	10/15/02	CBI	(G) Open, non-dispersive (resin)	(G) Blocked cycloaliphatic polyisocyanate
P-02-0835	07/17/02	10/15/02	CBI	(S) Resin for spray applied coatings	(G) Polyester modified polyurethane amine salted
P-02-0836	07/17/02	10/15/02	U.S. Paint Corporation	(G) Resin for coating	(G) Polymer of: butyl methacrylate, ethylene glycol dimethacrylate, 2-hydroxypropyl methacrylate, divinylbenzene, ethylvinylbenzene
P-02-0837	07/17/02	10/15/02	U.s. paint corporation	(G) Resin for coating	(G) Polymer of: 2,3-epoxypropyl neodecanoate, cyclohexyl methacrylate, acrylic acid
P-02-0838	07/17/02	10/15/02	CBI	(G) Synthetic industrial lubricant for contained use	(G) Dipentaerythritol ester of branched and linear fatty acids
P-02-0839	07/18/02	10/16/02	CBI	(G) Open non-dispersive	(G) Modified acrylic polymer
P-02-0840	07/19/02	10/17/02	Cook Composites and Polymers Co.	(G) Additive for plastic resins	(G) 2-propenoic acid, 2-methyl-[2-ethyl-2[[2-hydroxy-3-[(2-methyl-1-oxo]propoxy]methyl]-1,3-alkanediyl]bis[oxy(2-hydroxy-3,1-alkanediyl) ester
P-02-0841	07/18/02	10/16/02	CBI	(S) Brominated epoxy resin prereact for making resins for impregnating fiber reinforcement; fabrication processing aid	(G) Brominated epoxy resin
P-02-0842	07/19/02	10/17/02	The Dow Chemical Company	(S) Uv curable binder for coatings	(G) Solid uv-curable resin
P-02-0843	07/19/02	10/17/02	The Dow Chemical Company	(S) Uv curable binder for coatings	(G) Solid uv-curable resin

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 21 Notices of Commencement From: 07/08/02 to 07/22/02

Case No.	Received Date	Commencement/Import Date	Chemical
P-01-0332	07/11/02	06/17/02	(G) Cathodic epoxy dispersion resin
P-01-0333	07/11/02	06/17/02	(G) Cathodic epoxy dispersion resin
P-01-0820	07/12/02	07/05/02	(G) Urethane acrylate
P-02-0124	07/15/02	06/25/02	(G) Aminoacrylic polymer
P-02-0125	07/15/02	06/25/02	(G) Dialkylamine hydrochloride salt
P-02-0247	07/10/02	06/26/02	(G) Modified polyurethane resin
P-02-0248	07/16/02	06/02/02	(S) 1-hexanol, 3-mercapto, 1-acetate
P-02-0250	07/10/02	06/04/02	(G) Acrylic copolymer
P-02-0266	07/09/02	06/19/02	(G) Phenol, 4,4'-(1-methylethylidene)bis, polymer with (chloromethyl)oxirane, reaction products with an epoxy resin and octahydro-4,7-methano-1h-indenedimethanamine
P-02-0329	07/17/02	06/28/02	(G) Fatty acid polyethyleneimine condensate polymer
P-02-0331	07/18/02	06/06/02	(S) 1,3-benzenedicarboxylic acid, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine, hexanedioic acid, 1,6-hexanediol, 3-hydroxy-2-(hydroxymethyl)-2-methylpropanoic acid and 1,1'-methylenebis [4-isocyanatocyclohexane], compd. with n,n-diethylethanamine
P-02-0334	07/10/02	06/10/02	(G) Modified phenolic resin
P-02-0335	07/17/02	07/08/02	(S) 2-propenoic acid, 2-methyl-, polymer with n-(1,1-dimethyl-3-oxobutyl)-2-propenamide, ethyl 2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt
P-02-0342	07/10/02	06/04/02	(G) Polyester resin
P-02-0392	07/19/02	06/24/02	(S) Poly[oxy(methyl-1,2-ethanediyl)],alpha-[[[3-(trimethoxysilyl)propyl]amino]carbonyl]-omega-[[[[3-(trimethoxysilyl)propyl]amino]carbonyl]oxy]-
P-02-0412	07/10/02	06/21/02	(G) Epoxy resin ester
P-02-0490	07/17/02	06/23/02	(G) C14-18 fatty acids, calcium salts
P-02-0503	07/18/02	06/26/02	(G) Aromatic urethane
P-02-0504	07/18/02	07/09/02	(G) Aromatic aminoether
P-02-0514	07/05/02	07/05/02	(G) Diethoxybenzenamine derivative, diazotized, coupled with aminonaphthalenesulfonic acid derivative, ammonium salt
P-93-0401	07/16/02	06/26/02	(G) Polyurethane polyacrylate polymethacrylate

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: August 12, 2002.

Sandra R. Wilkins,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.